FAIL Net-Elexol-EtherIO24-0.18 x86_64-linux 2.6.23.1-slh64-smp-32

This distribution has been tested as part of the cpan-testers
effort to test as many new uploads to CPAN as possible.  See
http://testers.cpan.org/

Please cc any replies to cpan-testers@perl.org to keep other
test volunteers informed and to prevent any duplicate effort.

--

Dear CHRISY,
    
This is a computer-generated error report created automatically by
CPANPLUS, version 0.84. Testers personal comments may appear 
at the end of this report.


Thank you for uploading your work to CPAN.  However, it appears that
there were some problems testing your distribution.

TEST RESULTS:

Below is the error stack from stage 'make test':

[MSG] [Sat Feb  2 09:52:21 2008] Trying to get 'ftp://ftp.cpan.org/pub/CPAN/authors/id/C/CH/CHRISY/Net-Elexol-EtherIO24-0.18.tar.gz'
[MSG] [Sat Feb  2 09:52:22 2008] Trying to get 'ftp://ftp.cpan.org/pub/CPAN/authors/id/C/CH/CHRISY/CHECKSUMS'
[MSG] [Sat Feb  2 09:52:23 2008] Checksum matches for 'Net-Elexol-EtherIO24-0.18.tar.gz'
[MSG] [Sat Feb  2 09:52:23 2008] Extracted 'Net-Elexol-EtherIO24-0.18/'
[MSG] [Sat Feb  2 09:52:23 2008] Extracted 'Net-Elexol-EtherIO24-0.18/examples/'
[MSG] [Sat Feb  2 09:52:23 2008] Extracted 'Net-Elexol-EtherIO24-0.18/examples/eeprom_test.pl'
[MSG] [Sat Feb  2 09:52:23 2008] Extracted 'Net-Elexol-EtherIO24-0.18/examples/irig.pl'
[MSG] [Sat Feb  2 09:52:23 2008] Extracted 'Net-Elexol-EtherIO24-0.18/examples/README'
[MSG] [Sat Feb  2 09:52:23 2008] Extracted 'Net-Elexol-EtherIO24-0.18/examples/write_fixed_address.pl'
[MSG] [Sat Feb  2 09:52:23 2008] Extracted 'Net-Elexol-EtherIO24-0.18/META.yml'
[MSG] [Sat Feb  2 09:52:23 2008] Extracted 'Net-Elexol-EtherIO24-0.18/Changes'
[MSG] [Sat Feb  2 09:52:23 2008] Extracted 'Net-Elexol-EtherIO24-0.18/t/'
[MSG] [Sat Feb  2 09:52:23 2008] Extracted 'Net-Elexol-EtherIO24-0.18/t/pod-coverage.t'
[MSG] [Sat Feb  2 09:52:23 2008] Extracted 'Net-Elexol-EtherIO24-0.18/t/00-load.t'
[MSG] [Sat Feb  2 09:52:23 2008] Extracted 'Net-Elexol-EtherIO24-0.18/t/pod.t'
[MSG] [Sat Feb  2 09:52:23 2008] Extracted 'Net-Elexol-EtherIO24-0.18/t/thr.t'
[MSG] [Sat Feb  2 09:52:23 2008] Extracted 'Net-Elexol-EtherIO24-0.18/.cvsignore'
[MSG] [Sat Feb  2 09:52:23 2008] Extracted 'Net-Elexol-EtherIO24-0.18/MANIFEST'
[MSG] [Sat Feb  2 09:52:23 2008] Extracted 'Net-Elexol-EtherIO24-0.18/lib/'
[MSG] [Sat Feb  2 09:52:23 2008] Extracted 'Net-Elexol-EtherIO24-0.18/lib/Net/'
[MSG] [Sat Feb  2 09:52:23 2008] Extracted 'Net-Elexol-EtherIO24-0.18/lib/Net/Elexol/'
[MSG] [Sat Feb  2 09:52:23 2008] Extracted 'Net-Elexol-EtherIO24-0.18/lib/Net/Elexol/EtherIO24.pm'
[MSG] [Sat Feb  2 09:52:23 2008] Extracted 'Net-Elexol-EtherIO24-0.18/README'
[MSG] [Sat Feb  2 09:52:23 2008] Extracted 'Net-Elexol-EtherIO24-0.18/Makefile.PL'
[MSG] [Sat Feb  2 09:52:23 2008] Extracted 'Net::Elexol::EtherIO24' to '/home/d/.cpanplus/5.10.0/build/Net-Elexol-EtherIO24-0.18'
[MSG] [Sat Feb  2 09:52:23 2008] Checking if your kit is complete...
Looks good
Warning: prerequisite threads 0 not found.
Writing Makefile for Net::Elexol::EtherIO24

[MSG] [Sat Feb  2 09:52:23 2008] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value'
[MSG] [Sat Feb  2 09:52:24 2008] cp lib/Net/Elexol/EtherIO24.pm blib/lib/Net/Elexol/EtherIO24.pm
Manifying blib/man3/Net::Elexol::EtherIO24.3

[ERROR] [Sat Feb  2 09:52:25 2008] MAKE TEST failed: Illegal seek PERL_DL_NONLAZY=1 /usr/local/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(1, 'blib/lib', 'blib/arch')" t/*.t
t/00-load...........
1..1
not ok 1 - use Net::Elexol::EtherIO24;

#   Failed test 'use Net::Elexol::EtherIO24;'
#   at t/00-load.t line 6.
#     Tried to use 'Net::Elexol::EtherIO24'.
#     Error:  This Perl not built to support threads
# Compilation failed in require at /home/d/.cpanplus/5.10.0/build/Net-Elexol-EtherIO24-0.18/blib/lib/Net/Elexol/EtherIO24.pm line 18.
# BEGIN failed--compilation aborted at /home/d/.cpanplus/5.10.0/build/Net-Elexol-EtherIO24-0.18/blib/lib/Net/Elexol/EtherIO24.pm line 18.
# Compilation failed in require at (eval 3) line 2.
# BEGIN failed--compilation aborted at (eval 3) line 2.
Use of uninitialized value $Net::Elexol::EtherIO24::VERSION in concatenation (.) or string at t/00-load.t line 9.
# Testing Net::Elexol::EtherIO24 , Perl 5.010000, /usr/local/bin/perl
# Looks like you failed 1 test of 1.
 Dubious, test returned 1 (wstat 256, 0x100)
 Failed 1/1 subtests 
t/pod-coverage......
1..1
ok 1 - Pod coverage on Net::Elexol::EtherIO24
ok
t/pod...............
1..1
ok 1 - blib/lib/Net/Elexol/EtherIO24.pm
ok
t/thr...............
1..1
# Running under perl version 5.010000 for linux
# Current time local: Sat Feb  2 09:52:25 2008
# Current time GMT:   Sat Feb  2 08:52:25 2008
# Using Test.pm version 1.25
This Perl not built to support threads
Compilation failed in require at t/thr.t line 10.
BEGIN failed--compilation aborted at t/thr.t line 10.
 Dubious, test returned 255 (wstat 65280, 0xff00)
 Failed 1/1 subtests 

Test Summary Report
-------------------
t/00-load.t     (Wstat: 256 Tests: 1 Failed: 1)
  Failed test:  1
  Non-zero exit status: 1
t/thr.t         (Wstat: 65280 Tests: 0 Failed: 0)
  Non-zero exit status: 255
  Parse errors: Bad plan.  You planned 1 tests but ran 0.
Files=4, Tests=3,  1 wallclock secs ( 0.02 usr  0.02 sys +  0.31 cusr  0.12 csys =  0.47 CPU)
Result: FAIL
Failed 2/4 test programs. 1/3 subtests failed.
make: *** [test_dynamic] Error 255

[MSG] [Sat Feb  2 09:52:25 2008] DEFAULT 'proceed_on_test_failure' HANDLER RETURNING 'sub return value'

PREREQUISITES:

Here is a list of prerequisites you specified and versions we 
managed to load:
                                
	  Module Name                        Have     Want
	  IO::Select                         1.17        0
	  IO::Socket::INET                   1.31        0
	  Socket                             1.80        0
	  Test::More                         0.74        0
	  Time::HiRes                      1.9711        0
	  threads                            1.67        0
	  threads::shared                    1.14        0

******************************** NOTE ********************************
The comments above are created mechanically, possibly without manual
checking by the sender.  As there are many people performing automatic
tests on each upload to CPAN, it is likely that you will receive 
identical messages about the same problem.

If you believe that the message is mistaken, please reply to the first
one with correction and/or additional informations, and do not take
it personally.  We appreciate your patience. :)
**********************************************************************

Additional comments:
 

This report was machine-generated by CPAN::YACSmoke 0.0307.

--

Summary of my perl5 (revision 5 version 10 subversion 0) configuration:
  Platform:
    osname=linux, osvers=2.6.23.1-slh64-smp-32, archname=x86_64-linux
    uname='linux sanremo.defietser 2.6.23.1-slh64-smp-32 #1 smp preempt thu nov 15 17:55:06 cet 2007 x86_64 gnulinux '
    config_args='-des'
    hint=recommended, useposix=true, d_sigaction=define
    useithreads=undef, usemultiplicity=undef
    useperlio=define, d_sfio=undef, uselargefiles=define, usesocks=undef
    use64bitint=define, use64bitall=define, uselongdouble=undef
    usemymalloc=n, bincompat5005=undef
  Compiler:
    cc='cc', ccflags ='-fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64',
    optimize='-O2',
    cppflags='-fno-strict-aliasing -pipe -I/usr/local/include'
    ccversion='', gccversion='4.2.3 20071014 (prerelease) (Debian 4.2.2-3)', gccosandvers=''
    intsize=4, longsize=8, ptrsize=8, doublesize=8, byteorder=12345678
    d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=16
    ivtype='long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8
    alignbytes=8, prototype=define
  Linker and Libraries:
    ld='cc', ldflags =' -L/usr/local/lib'
    libpth=/usr/local/lib /lib /usr/lib /lib64 /usr/lib64
    libs=-lnsl -lgdbm -ldl -lm -lcrypt -lutil -lc
    perllibs=-lnsl -ldl -lm -lcrypt -lutil -lc
    libc=/lib/libc-2.7.so, so=so, useshrplib=false, libperl=libperl.a
    gnulibc_version='2.7'
  Dynamic Linking:
    dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E'
    cccdlflags='-fPIC', lddlflags='-shared -O2 -L/usr/local/lib'

• FAIL Net-Elexol-EtherIO24-0.18 x86_64-linux 2.6.23.1-slh64-smp-32 by DEVOGON