develooper Front page | perl.cpan.testers | Postings from February 2008

FAIL Hook-Output-File-0.04 darwin-thread-multi 8.10.0

From:
chris
Date:
February 9, 2008 16:16
Subject:
FAIL Hook-Output-File-0.04 darwin-thread-multi 8.10.0
This distribution has been tested as part of the cpan-testers
effort to test as many new uploads to CPAN as possible.  See
http://testers.cpan.org/

Please cc any replies to cpan-testers@perl.org to keep other
test volunteers informed and to prevent any duplicate effort.

--

Dear SCHUBIGER,
    
This is a computer-generated error report created automatically by
CPANPLUS, version 0.82. Testers personal comments may appear 
at the end of this report.


Thank you for uploading your work to CPAN.  However, it appears that
there were some problems testing your distribution.

TEST RESULTS:

Below is the error stack from stage 'make test':

[MSG] [Sun Feb 10 00:15:36 2008] Trying to get 'http://www.cpan.org/authors/id/S/SC/SCHUBIGER/CHECKSUMS'
[MSG] [Sun Feb 10 00:15:38 2008] Checksum matches for 'Hook-Output-File-0.04.tar.gz'
[MSG] [Sun Feb 10 00:15:39 2008] Extracted 'Hook-Output-File-0.04/'
[MSG] [Sun Feb 10 00:15:39 2008] Extracted 'Hook-Output-File-0.04/Changes'
[MSG] [Sun Feb 10 00:15:39 2008] Extracted 'Hook-Output-File-0.04/lib/'
[MSG] [Sun Feb 10 00:15:39 2008] Extracted 'Hook-Output-File-0.04/lib/Hook/'
[MSG] [Sun Feb 10 00:15:39 2008] Extracted 'Hook-Output-File-0.04/lib/Hook/Output/'
[MSG] [Sun Feb 10 00:15:39 2008] Extracted 'Hook-Output-File-0.04/lib/Hook/Output/File.pm'
[MSG] [Sun Feb 10 00:15:39 2008] Extracted 'Hook-Output-File-0.04/MANIFEST'
[MSG] [Sun Feb 10 00:15:39 2008] Extracted 'Hook-Output-File-0.04/t/'
[MSG] [Sun Feb 10 00:15:39 2008] Extracted 'Hook-Output-File-0.04/t/pod-coverage.t'
[MSG] [Sun Feb 10 00:15:39 2008] Extracted 'Hook-Output-File-0.04/t/pod.t'
[MSG] [Sun Feb 10 00:15:39 2008] Extracted 'Hook-Output-File-0.04/t/00-load.t'
[MSG] [Sun Feb 10 00:15:39 2008] Extracted 'Hook-Output-File-0.04/t/redirect.t'
[MSG] [Sun Feb 10 00:15:39 2008] Extracted 'Hook-Output-File-0.04/INSTALL'
[MSG] [Sun Feb 10 00:15:39 2008] Extracted 'Hook-Output-File-0.04/Build.PL'
[MSG] [Sun Feb 10 00:15:39 2008] Extracted 'Hook-Output-File-0.04/META.yml'
[MSG] [Sun Feb 10 00:15:39 2008] Extracted 'Hook-Output-File-0.04/Makefile.PL'
[MSG] [Sun Feb 10 00:15:39 2008] Extracted 'Hook-Output-File-0.04/README'
[MSG] [Sun Feb 10 00:15:39 2008] Extracted 'Hook::Output::File' to '/Volumes/Media/smoke/perl562/.cpanplus/5.6.2/build/Hook-Output-File-0.04'
[MSG] [Sun Feb 10 00:15:42 2008] Checking if your kit is complete...
Looks good
Warning: prerequisite IO::Capture 0 not found.
Writing Makefile for Hook::Output::File

[MSG] [Sun Feb 10 00:15:42 2008] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value'
[MSG] [Sun Feb 10 00:15:42 2008] Module 'Hook::Output::File' requires 'IO::Capture' version '0' to be installed 
[MSG] [Sun Feb 10 00:15:42 2008] Trying to get 'http://www.cpan.org/authors/id/R/RE/REYNOLDS/CHECKSUMS'
[MSG] [Sun Feb 10 00:15:42 2008] Checksum matches for 'IO-Capture-0.05.tar.gz'
[MSG] [Sun Feb 10 00:15:43 2008] Extracted 'IO-Capture-0.05/'
[MSG] [Sun Feb 10 00:15:43 2008] Extracted 'IO-Capture-0.05/BUGS'
[MSG] [Sun Feb 10 00:15:43 2008] Extracted 'IO-Capture-0.05/Changes'
[MSG] [Sun Feb 10 00:15:43 2008] Extracted 'IO-Capture-0.05/MANIFEST'
[MSG] [Sun Feb 10 00:15:43 2008] Extracted 'IO-Capture-0.05/META.yml'
[MSG] [Sun Feb 10 00:15:43 2008] Extracted 'IO-Capture-0.05/Makefile.PL'
[MSG] [Sun Feb 10 00:15:43 2008] Extracted 'IO-Capture-0.05/README'
[MSG] [Sun Feb 10 00:15:43 2008] Extracted 'IO-Capture-0.05/lib/'
[MSG] [Sun Feb 10 00:15:43 2008] Extracted 'IO-Capture-0.05/lib/IO/'
[MSG] [Sun Feb 10 00:15:43 2008] Extracted 'IO-Capture-0.05/lib/IO/Capture/'
[MSG] [Sun Feb 10 00:15:43 2008] Extracted 'IO-Capture-0.05/lib/IO/Capture/Overview.pod'
[MSG] [Sun Feb 10 00:15:43 2008] Extracted 'IO-Capture-0.05/lib/IO/Capture/Stderr.pm'
[MSG] [Sun Feb 10 00:15:43 2008] Extracted 'IO-Capture-0.05/lib/IO/Capture/Stdout.pm'
[MSG] [Sun Feb 10 00:15:43 2008] Extracted 'IO-Capture-0.05/lib/IO/Capture/Tie_STDx.pm'
[MSG] [Sun Feb 10 00:15:43 2008] Extracted 'IO-Capture-0.05/lib/IO/Capture.pm'
[MSG] [Sun Feb 10 00:15:43 2008] Extracted 'IO-Capture-0.05/t/'
[MSG] [Sun Feb 10 00:15:43 2008] Extracted 'IO-Capture-0.05/t/01_1_Published_Methods.t'
[MSG] [Sun Feb 10 00:15:43 2008] Extracted 'IO-Capture-0.05/t/01_2_Published_Methods_Stdout.t'
[MSG] [Sun Feb 10 00:15:43 2008] Extracted 'IO-Capture-0.05/t/01_3_Published_Methods_Stderr.t'
[MSG] [Sun Feb 10 00:15:43 2008] Extracted 'IO-Capture-0.05/t/02_1_basic_base.t'
[MSG] [Sun Feb 10 00:15:43 2008] Extracted 'IO-Capture-0.05/t/02_2_basic_Stdout.t'
[MSG] [Sun Feb 10 00:15:43 2008] Extracted 'IO-Capture-0.05/t/02_3_basic_Stderr.t'
[MSG] [Sun Feb 10 00:15:43 2008] Extracted 'IO-Capture-0.05/t/03_1_Errorcheck_Stdout.t'
[MSG] [Sun Feb 10 00:15:43 2008] Extracted 'IO-Capture-0.05/t/03_2_Errorcheck_Stderr.t'
[MSG] [Sun Feb 10 00:15:43 2008] Extracted 'IO-Capture-0.05/t/04_1_Side-effects_base.t'
[MSG] [Sun Feb 10 00:15:43 2008] Extracted 'IO-Capture-0.05/t/04_2_Side-effects_Stdout.t'
[MSG] [Sun Feb 10 00:15:43 2008] Extracted 'IO-Capture-0.05/t/04_3_Side-effects_Stderr.t'
[MSG] [Sun Feb 10 00:15:43 2008] Extracted 'IO-Capture-0.05/t/05_2_regression.t'
[MSG] [Sun Feb 10 00:15:43 2008] Extracted 'IO-Capture-0.05/t/06_2_printf_Stdout.t'
[MSG] [Sun Feb 10 00:15:43 2008] Extracted 'IO-Capture-0.05/t/06_3_printf_Stderr.t'
[MSG] [Sun Feb 10 00:15:43 2008] Extracted 'IO-Capture-0.05/t/06_printf_stdout.t'
[MSG] [Sun Feb 10 00:15:43 2008] Extracted 'IO-Capture-0.05/t/07_3_warn_Stderr.t'
[MSG] [Sun Feb 10 00:15:44 2008] Extracted 'IO::Capture' to '/Volumes/Media/smoke/perl562/.cpanplus/5.6.2/build/IO-Capture-0.05'
[MSG] [Sun Feb 10 00:15:45 2008] Checking if your kit is complete...
Looks good
Writing Makefile for IO::Capture

[MSG] [Sun Feb 10 00:15:45 2008] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value'
[MSG] [Sun Feb 10 00:15:51 2008] cp lib/IO/Capture.pm blib/lib/IO/Capture.pm
cp lib/IO/Capture/Overview.pod blib/lib/IO/Capture/Overview.pod
cp lib/IO/Capture/Stderr.pm blib/lib/IO/Capture/Stderr.pm
cp lib/IO/Capture/Tie_STDx.pm blib/lib/IO/Capture/Tie_STDx.pm
cp lib/IO/Capture/Stdout.pm blib/lib/IO/Capture/Stdout.pm
Manifying blib/man3/IO::Capture.3
Manifying blib/man3/IO::Capture::Tie_STDx.3
Manifying blib/man3/IO::Capture::Stderr.3
Manifying blib/man3/IO::Capture::Overview.3
Manifying blib/man3/IO::Capture::Stdout.3

[MSG] [Sun Feb 10 00:15:58 2008] MAKE TEST passed: PERL_DL_NONLAZY=1 /Volumes/Media/smoke/perl562/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
t/01_1_Published_Methods...........ok
t/01_2_Published_Methods_Stdout....ok
t/01_3_Published_Methods_Stderr....ok
t/02_1_basic_base..................ok
t/02_2_basic_Stdout................ok
t/02_3_basic_Stderr................ok
t/03_1_Errorcheck_Stdout...........ok
t/03_2_Errorcheck_Stderr...........ok
t/04_1_Side-effects_base...........ok
t/04_2_Side-effects_Stdout.........ok
t/04_3_Side-effects_Stderr.........ok
t/05_2_regression..................ok
t/06_2_printf_Stdout...............ok
t/06_3_printf_Stderr...............ok
t/06_printf_stdout.................ok
t/07_3_warn_Stderr.................ok
All tests successful.
Files=16, Tests=121,  7 wallclock secs ( 2.37 cusr +  0.54 csys =  2.91 CPU)

[MSG] [Sun Feb 10 00:15:58 2008] Ok, not sending test report
[MSG] [Sun Feb 10 00:16:02 2008] cp lib/Hook/Output/File.pm blib/lib/Hook/Output/File.pm
Manifying blib/man3/Hook::Output::File.3

[ERROR] [Sun Feb 10 00:16:05 2008] MAKE TEST failed:  PERL_DL_NONLAZY=1 /Volumes/Media/smoke/perl562/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
t/00-load.........# Testing Hook::Output::File 0.04, Perl 5.006002, /Volumes/Media/smoke/perl562/bin/perl
ok
t/pod-coverage....skipped
        all skipped: Test::Pod::Coverage 1.04 required for testing POD coverage
t/pod.............skipped
        all skipped: Test::Pod 1.14 required for testing POD
t/redirect........
#   Failed test 'stdout redirected'
#   at t/redirect.t line 29.
#          got: ''
#     expected: 'stdout (redirected)'

#   Failed test 'stderr redirected'
#   at t/redirect.t line 30.
#          got: ''
#     expected: 'stderr (redirected)'
# Looks like you failed 2 tests of 4.
dubious
	Test returned status 2 (wstat 512, 0x200)
DIED. FAILED tests 1-2
	Failed 2/4 tests, 50.00% okay
Failed Test  Stat Wstat Total Fail  List of Failed
-------------------------------------------------------------------------------
t/redirect.t    2   512     4    2  1-2
2 tests skipped.
Failed 1/4 test scripts. 2/5 subtests failed.
Files=4, Tests=5,  2 wallclock secs ( 0.71 cusr +  0.20 csys =  0.91 CPU)
Failed 1/4 test programs. 2/5 subtests failed.

[MSG] [Sun Feb 10 00:16:05 2008] DEFAULT 'proceed_on_test_failure' HANDLER RETURNING 'sub return value'

PREREQUISITES:

Here is a list of prerequisites you specified and versions we 
managed to load:
                                
	  Module Name                        Have     Want
	  Carp                                  0        0
	  File::Spec                         3.25        0
	  File::Temp                         0.14        0
	  IO::Capture                      5.e-02        0
	  Test::More                         0.71        0
	  Tie::Handle                         4.0        0

******************************** NOTE ********************************
The comments above are created mechanically, possibly without manual
checking by the sender.  As there are many people performing automatic
tests on each upload to CPAN, it is likely that you will receive 
identical messages about the same problem.

If you believe that the message is mistaken, please reply to the first
one with correction and/or additional informations, and do not take
it personally.  We appreciate your patience. :)
**********************************************************************

Additional comments:
 

This report was machine-generated by CPAN::YACSmoke 3.07e-02.

------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------

Environment variables:

    AUTOMATED_TESTING = 1
    PATH = /bin:/sbin:/usr/bin:/usr/sbin:/usr/local/bin:/usr/local/sbin
    PERL5LIB = :/Volumes/Media/smoke/perl562/.cpanplus/5.6.2/build/IO-Capture-0.05/blib/lib:/Volumes/Media/smoke/perl562/.cpanplus/5.6.2/build/IO-Capture-0.05/blib/arch:/Volumes/Media/smoke/perl562/.cpanplus/5.6.2/build/IO-Capture-0.05/blib:/Volumes/Media/smoke/perl562/.cpanplus/5.6.2/build/IO-Capture-0.05/blib/lib:/Volumes/Media/smoke/perl562/.cpanplus/5.6.2/build/IO-Capture-0.05/blib/arch:/Volumes/Media/smoke/perl562/.cpanplus/5.6.2/build/IO-Capture-0.05/blib:/Volumes/Media/smoke/perl562/.cpanplus/5.6.2/build/Hook-Output-File-0.04/blib/lib:/Volumes/Media/smoke/perl562/.cpanplus/5.6.2/build/Hook-Output-File-0.04/blib/arch:/Volumes/Media/smoke/perl562/.cpanplus/5.6.2/build/Hook-Output-File-0.04/blib
    PERL5_CPANPLUS_IS_EXECUTING = 
    PERL5_CPANPLUS_IS_RUNNING = 29524
    PERL5_CPANPLUS_IS_VERSION = 0.82
    PERL_MM_USE_DEFAULT = 1
    SHELL = /bin/bash
    TERM = screen

Perl special variables (and OS-specific diagnostics, for MSWin32):

    Perl: $^X = /Volumes/Media/smoke/perl562/bin/perl
    UID:  $<  = 502
    EUID: $>  = 502
    GID:  $(  = 502 502
    EGID: $)  = 502 502


-------------------------------


--

Summary of my perl5 (revision 5.0 version 6 subversion 2) configuration:
  Platform:
    osname=darwin, osvers=8.10.0, archname=darwin-thread-multi
    uname='darwin bingos-power-mac-g4-agp-graphics.local 8.10.0 darwin kernel version 8.10.0: wed may 23 16:50:59 pdt 2007; root:xnu-792.21.3~1release_ppc power macintosh powerpc '
    config_args=''
    hint=recommended, useposix=true, d_sigaction=define
    usethreads=define use5005threads=undef useithreads=define usemultiplicity=define
    useperlio=undef d_sfio=undef uselargefiles=define usesocks=undef
    use64bitint=undef use64bitall=undef uselongdouble=undef
  Compiler:
    cc='cc', ccflags ='-pipe -fno-common -DPERL_DARWIN -no-cpp-precomp -fno-strict-aliasing -I/usr/local/include',
    optimize='-O3',
    cppflags='-pipe -fno-common -DPERL_DARWIN -no-cpp-precomp -fno-strict-aliasing -I/usr/local/include'
    ccversion='', gccversion='4.0.1 (Apple Computer, Inc. build 5367)', gccosandvers=''
    intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=4321
    d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=16
    ivtype='long', ivsize=4, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8
    alignbytes=8, usemymalloc=n, prototype=define
  Linker and Libraries:
    ld='env MACOSX_DEPLOYMENT_TARGET=10.3 cc', ldflags =' -L/usr/local/lib'
    libpth=/usr/local/lib /usr/lib
    libs=-ldbm -ldl -lm -lc
    perllibs=-ldl -lm -lc
    libc=/usr/lib/libc.dylib, so=dylib, useshrplib=false, libperl=libperl.a
  Dynamic Linking:
    dlsrc=dl_dyld.xs, dlext=bundle, d_dlsymun=undef, ccdlflags=' '
    cccdlflags=' ', lddlflags=' -bundle -undefined dynamic_lookup -L/usr/local/lib'

Comments to Ask Bjørn Hansen at ask@perl.org | Group listing | About