Front page | perl.cpan.testers |
Postings from February 2008
FAIL SeeAlso-Server-0.50 i686-linux-64int 2.6.22-1-k7
Thread Next
From:
andreas.koenig.gmwojprw
Date:
February 28, 2008 07:14
Subject:
FAIL SeeAlso-Server-0.50 i686-linux-64int 2.6.22-1-k7
This distribution has been tested as part of the cpan-testers
effort to test as many new uploads to CPAN as possible. See
http://testers.cpan.org/
Please cc any replies to cpan-testers@perl.org to keep other
test volunteers informed and to prevent any duplicate effort.
--
Dear Jakob Voss,
This is a computer-generated report for SeeAlso-Server-0.50
on perl 5.8.8 patch 32025, created by CPAN-Reporter-1.11.
Thank you for uploading your work to CPAN. However, there was a problem
testing your distribution.
If you think this report is invalid, please consult the CPAN Testers Wiki
for suggestions on how to avoid getting FAIL reports for missing library
or binary dependencies, unsupported operating systems, and so on:
http://cpantest.grango.org/wiki/CPANAuthorNotes
Sections of this report:
* Tester comments
* Program output
* Prerequisites
* Environment and other context
------------------------------
TESTER COMMENTS
------------------------------
Additional comments from tester:
none provided
------------------------------
PROGRAM OUTPUT
------------------------------
Output from '/usr/bin/make test':
PERL_DL_NONLAZY=1 /home/src/perl/repoperls/installed-perls/maint-5.8/pOwntgt/perl-5.8.0@32025/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
t/dbisource.........Usage: JSON::XS::new(klass) at /home/sand/.cpan/build/SeeAlso-Server-0.50-NhK1UZ/blib/lib/SeeAlso/Response.pm line 4.
Compilation failed in require at /home/sand/.cpan/build/SeeAlso-Server-0.50-NhK1UZ/blib/lib/SeeAlso/Source.pm line 5.
BEGIN failed--compilation aborted at /home/sand/.cpan/build/SeeAlso-Server-0.50-NhK1UZ/blib/lib/SeeAlso/Source.pm line 5.
Compilation failed in require at /home/sand/.cpan/build/SeeAlso-Server-0.50-NhK1UZ/blib/lib/SeeAlso/Source/DBI.pm line 7.
BEGIN failed--compilation aborted at /home/sand/.cpan/build/SeeAlso-Server-0.50-NhK1UZ/blib/lib/SeeAlso/Source/DBI.pm line 7.
Compilation failed in require at t/dbisource.t line 6.
BEGIN failed--compilation aborted at t/dbisource.t line 6.
# Looks like your test died before it could output anything.
Dubious, test returned 255 (wstat 65280, 0xff00)
No subtests run
t/identifier........ok
t/isbn..............ok
t/pnd...............ok
t/pod-coverage......ok
t/pod...............ok
t/response..........Usage: JSON::XS::new(klass) at /home/sand/.cpan/build/SeeAlso-Server-0.50-NhK1UZ/blib/lib/SeeAlso/Response.pm line 4.
Compilation failed in require at t/response.t line 7.
BEGIN failed--compilation aborted at t/response.t line 7.
# Looks like your test died before it could output anything.
Dubious, test returned 255 (wstat 65280, 0xff00)
Failed 8/8 subtests
t/server............Usage: JSON::XS::new(klass) at /home/sand/.cpan/build/SeeAlso-Server-0.50-NhK1UZ/blib/lib/SeeAlso/Response.pm line 4.
Compilation failed in require at /home/sand/.cpan/build/SeeAlso-Server-0.50-NhK1UZ/blib/lib/SeeAlso/Server.pm line 14.
BEGIN failed--compilation aborted at /home/sand/.cpan/build/SeeAlso-Server-0.50-NhK1UZ/blib/lib/SeeAlso/Server.pm line 14.
Compilation failed in require at t/server.t line 10.
BEGIN failed--compilation aborted at t/server.t line 10.
# Looks like your test died before it could output anything.
Dubious, test returned 255 (wstat 65280, 0xff00)
Failed 12/12 subtests
t/source............Usage: JSON::XS::new(klass) at /home/sand/.cpan/build/SeeAlso-Server-0.50-NhK1UZ/blib/lib/SeeAlso/Response.pm line 4.
Compilation failed in require at /home/sand/.cpan/build/SeeAlso-Server-0.50-NhK1UZ/blib/lib/SeeAlso/Source.pm line 5.
BEGIN failed--compilation aborted at /home/sand/.cpan/build/SeeAlso-Server-0.50-NhK1UZ/blib/lib/SeeAlso/Source.pm line 5.
Compilation failed in require at t/source.t line 6.
BEGIN failed--compilation aborted at t/source.t line 6.
# Looks like your test died before it could output anything.
Dubious, test returned 255 (wstat 65280, 0xff00)
Failed 15/15 subtests
t/thingisbn.........Usage: JSON::XS::new(klass) at /home/sand/.cpan/build/SeeAlso-Server-0.50-NhK1UZ/blib/lib/SeeAlso/Response.pm line 4.
Compilation failed in require at /home/sand/.cpan/build/SeeAlso-Server-0.50-NhK1UZ/blib/lib/SeeAlso/Source.pm line 5.
BEGIN failed--compilation aborted at /home/sand/.cpan/build/SeeAlso-Server-0.50-NhK1UZ/blib/lib/SeeAlso/Source.pm line 5.
Compilation failed in require at /home/sand/.cpan/build/SeeAlso-Server-0.50-NhK1UZ/blib/lib/SeeAlso/Source/DBI.pm line 7.
BEGIN failed--compilation aborted at /home/sand/.cpan/build/SeeAlso-Server-0.50-NhK1UZ/blib/lib/SeeAlso/Source/DBI.pm line 7.
Compilation failed in require at /home/sand/.cpan/build/SeeAlso-Server-0.50-NhK1UZ/blib/lib/SeeAlso/Source/ThingISBN.pm line 8.
BEGIN failed--compilation aborted at /home/sand/.cpan/build/SeeAlso-Server-0.50-NhK1UZ/blib/lib/SeeAlso/Source/ThingISBN.pm line 8.
Compilation failed in require at t/thingisbn.t line 6.
BEGIN failed--compilation aborted at t/thingisbn.t line 6.
# Looks like your test died before it could output anything.
Dubious, test returned 255 (wstat 65280, 0xff00)
Failed 1/1 subtests
Test Summary Report
-------------------
t/dbisource.t (Wstat: 65280 Tests: 0 Failed: 0)
Non-zero exit status: 255
Parse errors: No plan found in TAP output
t/response.t (Wstat: 65280 Tests: 0 Failed: 0)
Non-zero exit status: 255
Parse errors: Bad plan. You planned 8 tests but ran 0.
t/server.t (Wstat: 65280 Tests: 0 Failed: 0)
Non-zero exit status: 255
Parse errors: Bad plan. You planned 12 tests but ran 0.
t/source.t (Wstat: 65280 Tests: 0 Failed: 0)
Non-zero exit status: 255
Parse errors: Bad plan. You planned 15 tests but ran 0.
t/thingisbn.t (Wstat: 65280 Tests: 0 Failed: 0)
Non-zero exit status: 255
Parse errors: Bad plan. You planned 1 tests but ran 0.
Files=10, Tests=37, 2 wallclock secs ( 0.07 usr 0.01 sys + 1.07 cusr 0.15 csys = 1.30 CPU)
Result: FAIL
Failed 5/10 test programs. 0/37 subtests failed.
make: *** [test_dynamic] Fehler 255
------------------------------
PREREQUISITES
------------------------------
Prerequisite modules loaded:
requires:
Module Need Have
-------------- ---- -----
Business::ISBN 2.02 2.03
Carp 1.01 1.07
CGI 3.0 3.33
Date::Parse 2.27 2.27
DBI 1.54 1.602
JSON 2.0 2.07
------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------
Environment variables:
LANG = de_DE.UTF-8
PATH = /usr/lib/ccache:/home/sand/bin:/usr/local/bin:/usr/bin:/bin:/usr/bin/X11:/usr/games:/usr/local/perl/bin:/usr/X11/bin:/sbin:/usr/sbin
PERL5LIB =
PERL5_CPANPLUS_IS_RUNNING = 27014
PERL5_CPAN_IS_RUNNING = 27014
PERL_MM_USE_DEFAULT = 1
SHELL = /usr/bin/zsh
TERM = screen
Perl special variables (and OS-specific diagnostics, for MSWin32):
$^X = /home/src/perl/repoperls/installed-perls/maint-5.8/pOwntgt/perl-5.8.0@32025/bin/perl
$UID/$EUID = 1005 / 1005
$GID = 1005 1005
$EGID = 1005 1005
Perl module toolchain versions installed:
Module Have
------------------- -------
CPAN 1.92_57
Cwd 3.2701
ExtUtils::CBuilder 0.22
ExtUtils::Command 1.13
ExtUtils::Install 1.45
ExtUtils::MakeMaker 6.43_01
ExtUtils::Manifest 1.51
ExtUtils::ParseXS 2.19
File::Spec 3.2701
Module::Build 0.2808
Module::Signature 0.55
Test::Harness 3.10
Test::More 0.74
YAML 0.66
YAML::Syck 1.04
version 0.74
--
Summary of my perl5 (revision 5 version 8 subversion 8 patch 32025) configuration:
Platform:
osname=linux, osvers=2.6.22-1-k7, archname=i686-linux-64int
uname='linux k75 2.6.22-1-k7 #1 smp sun jul 29 15:15:55 utc 2007 i686 gnulinux '
config_args='-Dprefix=/home/src/perl/repoperls/installed-perls/maint-5.8/pOwntgt/perl-5.8.0@32025 -Dinstallusrbinperl=n -Uversiononly -Dusedevel -des -Duse64bitint'
hint=recommended, useposix=true, d_sigaction=define
usethreads=undef use5005threads=undef useithreads=undef usemultiplicity=undef
useperlio=define d_sfio=undef uselargefiles=define usesocks=undef
use64bitint=define use64bitall=undef uselongdouble=undef
usemymalloc=n, bincompat5005=undef
Compiler:
cc='cc', ccflags ='-fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64',
optimize='-O2',
cppflags='-fno-strict-aliasing -pipe -I/usr/local/include'
ccversion='', gccversion='4.1.2 20061115 (prerelease) (Debian 4.1.1-21)', gccosandvers=''
intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=12345678
d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=12
ivtype='long long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8
alignbytes=4, prototype=define
Linker and Libraries:
ld='cc', ldflags =' -L/usr/local/lib'
libpth=/usr/local/lib /lib /usr/lib /usr/lib64
libs=-lnsl -lgdbm -ldb -ldl -lm -lcrypt -lutil -lc
perllibs=-lnsl -ldl -lm -lcrypt -lutil -lc
libc=/lib/libc-2.6.1.so, so=so, useshrplib=false, libperl=libperl.a
gnulibc_version='2.6.1'
Dynamic Linking:
dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E'
cccdlflags='-fPIC', lddlflags='-shared -O2 -L/usr/local/lib'
Thread Next