develooper Front page | perl.cpan.testers | Postings from February 2008

FAIL Data-CloudWeights-0.1.29 x86_64-linux-thread-multi-ld 2.6.22.10

From:
imacat
Date:
February 29, 2008 01:01
Subject:
FAIL Data-CloudWeights-0.1.29 x86_64-linux-thread-multi-ld 2.6.22.10
This distribution has been tested as part of the cpan-testers
effort to test as many new uploads to CPAN as possible.  See
http://testers.cpan.org/

Please cc any replies to cpan-testers@perl.org to keep other
test volunteers informed and to prevent any duplicate effort.

--

Dear PJFL,
    
This is a computer-generated error report created automatically by
CPANPLUS, version 0.84. Testers personal comments may appear 
at the end of this report.


Thank you for uploading your work to CPAN.  However, it appears that
there were some problems testing your distribution.

TEST RESULTS:

Below is the error stack from stage 'make test':

[MSG] [Fri Feb 29 17:00:51 2008] Trying to get 'http://www.cpan.org/authors/id/P/PJ/PJFL/data-cloudweights/Data-CloudWeights-0.1.29.tar.gz'
[MSG] [Fri Feb 29 17:00:53 2008] Trying to get 'http://www.cpan.org/authors/id/P/PJ/PJFL/data-cloudweights/CHECKSUMS'
[MSG] [Fri Feb 29 17:00:53 2008] Checksum matches for 'Data-CloudWeights-0.1.29.tar.gz'
[MSG] [Fri Feb 29 17:00:53 2008] Extracted 'Data-CloudWeights-0.1.29/'
[MSG] [Fri Feb 29 17:00:53 2008] Extracted 'Data-CloudWeights-0.1.29/t/'
[MSG] [Fri Feb 29 17:00:53 2008] Extracted 'Data-CloudWeights-0.1.29/t/10base.t'
[MSG] [Fri Feb 29 17:00:53 2008] Extracted 'Data-CloudWeights-0.1.29/META.yml'
[MSG] [Fri Feb 29 17:00:53 2008] Extracted 'Data-CloudWeights-0.1.29/Makefile.PL'
[MSG] [Fri Feb 29 17:00:53 2008] Extracted 'Data-CloudWeights-0.1.29/MANIFEST'
[MSG] [Fri Feb 29 17:00:53 2008] Extracted 'Data-CloudWeights-0.1.29/README'
[MSG] [Fri Feb 29 17:00:53 2008] Extracted 'Data-CloudWeights-0.1.29/lib/'
[MSG] [Fri Feb 29 17:00:53 2008] Extracted 'Data-CloudWeights-0.1.29/lib/Data/'
[MSG] [Fri Feb 29 17:00:53 2008] Extracted 'Data-CloudWeights-0.1.29/lib/Data/CloudWeights.pm'
[MSG] [Fri Feb 29 17:00:53 2008] Extracted 'Data::CloudWeights' to '/opt/perl/testers/.cpanplus/5.8.8/build/Data-CloudWeights-0.1.29'
[MSG] [Fri Feb 29 17:00:54 2008] Checking if your kit is complete...
Looks good
Warning: prerequisite Class::Accessor::Fast 0.31 not found.
Writing Makefile for Data::CloudWeights

[MSG] [Fri Feb 29 17:00:54 2008] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value'
[MSG] [Fri Feb 29 17:00:54 2008] Module 'Data::CloudWeights' requires 'Class::Accessor::Fast' version '0.31' to be installed 
[MSG] [Fri Feb 29 17:00:54 2008] Trying to get 'http://www.cpan.org/authors/id/K/KA/KASEI/Class-Accessor-0.31.tar.gz'
[MSG] [Fri Feb 29 17:00:55 2008] Trying to get 'http://www.cpan.org/authors/id/K/KA/KASEI/CHECKSUMS'
[MSG] [Fri Feb 29 17:00:56 2008] Checksum matches for 'Class-Accessor-0.31.tar.gz'
[MSG] [Fri Feb 29 17:00:56 2008] Extracted 'Class-Accessor-0.31/'
[MSG] [Fri Feb 29 17:00:56 2008] Extracted 'Class-Accessor-0.31/t/'
[MSG] [Fri Feb 29 17:00:56 2008] Extracted 'Class-Accessor-0.31/t/croak.t'
[MSG] [Fri Feb 29 17:00:56 2008] Extracted 'Class-Accessor-0.31/t/bestpractice.t'
[MSG] [Fri Feb 29 17:00:56 2008] Extracted 'Class-Accessor-0.31/t/getset.t'
[MSG] [Fri Feb 29 17:00:56 2008] Extracted 'Class-Accessor-0.31/t/aliases.t'
[MSG] [Fri Feb 29 17:00:56 2008] Extracted 'Class-Accessor-0.31/t/accessors.t'
[MSG] [Fri Feb 29 17:00:56 2008] Extracted 'Class-Accessor-0.31/lib/'
[MSG] [Fri Feb 29 17:00:56 2008] Extracted 'Class-Accessor-0.31/lib/Class/'
[MSG] [Fri Feb 29 17:00:56 2008] Extracted 'Class-Accessor-0.31/lib/Class/Accessor/'
[MSG] [Fri Feb 29 17:00:56 2008] Extracted 'Class-Accessor-0.31/lib/Class/Accessor/Faster.pm'
[MSG] [Fri Feb 29 17:00:56 2008] Extracted 'Class-Accessor-0.31/lib/Class/Accessor/Fast.pm'
[MSG] [Fri Feb 29 17:00:56 2008] Extracted 'Class-Accessor-0.31/lib/Class/Accessor.pm'
[MSG] [Fri Feb 29 17:00:56 2008] Extracted 'Class-Accessor-0.31/README'
[MSG] [Fri Feb 29 17:00:56 2008] Extracted 'Class-Accessor-0.31/Changes'
[MSG] [Fri Feb 29 17:00:56 2008] Extracted 'Class-Accessor-0.31/Makefile.PL'
[MSG] [Fri Feb 29 17:00:56 2008] Extracted 'Class-Accessor-0.31/META.yml'
[MSG] [Fri Feb 29 17:00:56 2008] Extracted 'Class-Accessor-0.31/INSTALL'
[MSG] [Fri Feb 29 17:00:56 2008] Extracted 'Class-Accessor-0.31/examples/'
[MSG] [Fri Feb 29 17:00:56 2008] Extracted 'Class-Accessor-0.31/examples/benchmark'
[MSG] [Fri Feb 29 17:00:56 2008] Extracted 'Class-Accessor-0.31/MANIFEST'
[MSG] [Fri Feb 29 17:00:56 2008] Extracted 'Class::Accessor::Fast' to '/opt/perl/testers/.cpanplus/5.8.8/build/Class-Accessor-0.31'
[MSG] [Fri Feb 29 17:00:57 2008] Checking if your kit is complete...
Looks good
Writing Makefile for Class::Accessor

[MSG] [Fri Feb 29 17:00:57 2008] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value'
[MSG] [Fri Feb 29 17:00:57 2008] cp lib/Class/Accessor/Fast.pm blib/lib/Class/Accessor/Fast.pm
cp lib/Class/Accessor/Faster.pm blib/lib/Class/Accessor/Faster.pm
cp lib/Class/Accessor.pm blib/lib/Class/Accessor.pm
Manifying blib/man3/Class::Accessor::Faster.3
Manifying blib/man3/Class::Accessor::Fast.3
Manifying blib/man3/Class::Accessor.3

[MSG] [Fri Feb 29 17:00:57 2008] MAKE TEST passed: t/accessors.........ok
t/aliases...........ok
t/bestpractice......ok
t/croak.............ok
t/getset............ok
All tests successful.
Files=5, Tests=119,  0 wallclock secs ( 0.05 usr  0.01 sys +  0.20 cusr  0.02 csys =  0.28 CPU)
Result: PASS

[MSG] [Fri Feb 29 17:00:57 2008] Sending test report for 'Class-Accessor-0.31'
[MSG] [Fri Feb 29 17:00:57 2008] Ok, not sending test report
[MSG] [Fri Feb 29 17:00:58 2008] cp lib/Data/CloudWeights.pm blib/lib/Data/CloudWeights.pm
Manifying blib/man3/Data::CloudWeights.3

[ERROR] [Fri Feb 29 17:00:58 2008] MAKE TEST failed: ¤£§Æ±æªº¸Ë¸m¿é¥X¤J±±¨î (ioctl) t/10base......
#   Failed test 'use Data::CloudWeights;'
#   at t/10base.t line 14.
#     Tried to use 'Data::CloudWeights'.
#     Error:  Can't locate Readonly.pm in @INC (@INC contains: /opt/perl/testers/.cpanplus/5.8.8/build/Data-CloudWeights-0.1.29/t/../lib /opt/perl/testers/.cpanplus/5.8.8/build/Data-CloudWeights-0.1.29/blib/lib /opt/perl/testers/.cpanplus/5.8.8/build/Data-CloudWeights-0.1.29/blib/arch /home/imacat/lib/perl5 /opt/perl/testers/.cpanplus/5.8.8/build/Chart-Graph-3.2/blib/lib /opt/perl/testers/.cpanplus/5.8.8/build/Chart-Graph-3.2/blib/arch /opt/perl/testers/.cpanplus/5.8.8/build/Chart-Graph-3.2/blib /opt/perl/testers/.cpanplus/5.8.8/build/Class-Accessor-0.31/blib/lib /opt/perl/testers/.cpanplus/5.8.8/build/Class-Accessor-0.31/blib/arch /opt/perl/testers/.cpanplus/5.8.8/build/Class-Accessor-0.31/blib /opt/perl/testers/.cpanplus/5.8.8/build/Data-CloudWeights-0.1.29/blib /opt/perl/testers/lib/5.8.8/x86_64-linux-thread-multi-ld /opt/perl/testers/lib/5.8.8 /opt/perl/testers/lib/site_perl/5.8.8/x86_64-linux-thread-multi-ld /opt/perl/testers/lib/site_perl/5.8.8 /opt/perl/testers/lib/si!
 te_perl .) at /opt/perl/testers/.cpanplus/5.8.8/build/Data-CloudWeights-0.1.29/t/../lib/Data/CloudWeights.pm line 9.
# BEGIN failed--compilation aborted at /opt/perl/testers/.cpanplus/5.8.8/build/Data-CloudWeights-0.1.29/t/../lib/Data/CloudWeights.pm line 9.
# Compilation failed in require at (eval 5) line 2.
# BEGIN failed--compilation aborted at (eval 5) line 2.
Can't locate object method "formation" via package "Data::CloudWeights" at t/10base.t line 17.
# Looks like you planned 7 tests but only ran 1.
# Looks like you failed 1 test of 1 run.
# Looks like your test died just after 1.
 Dubious, test returned 255 (wstat 65280, 0xff00)
 Failed 7/7 subtests 

Test Summary Report
-------------------
t/10base.t (Wstat: 65280 Tests: 1 Failed: 1)
  Failed test:  1
  Non-zero exit status: 255
  Parse errors: Bad plan.  You planned 7 tests but ran 1.
Files=1, Tests=1,  0 wallclock secs ( 0.01 usr  0.00 sys +  0.06 cusr  0.00 csys =  0.07 CPU)
Result: FAIL
Failed 1/1 test programs. 1/1 subtests failed.
make: *** [test_dynamic] Error 255

[MSG] [Fri Feb 29 17:00:58 2008] DEFAULT 'proceed_on_test_failure' HANDLER RETURNING 'sub return value'


MISSING PREREQUISITES:

It was observed that the test suite seem to fail without these modules:

Readonly

As such, adding the prerequisite module(s) to 'PREREQ_PM' in your
Makefile.PL should solve this problem.  For example:

WriteMakefile(
    AUTHOR      => 'PJFL (cpanplus-info@lists.sf.net)',
    ... # other information
    PREREQ_PM   => {
	'Readonly'	=> '0', # or a minimum working version
    }
);

If you are interested in making a more flexible Makefile.PL that can
probe for missing dependencies and install them, ExtUtils::AutoInstall
at <http://search.cpan.org/dist/ExtUtils-AutoInstall/> may be
worth a look.

Thanks! :-)

PREREQUISITES:

Here is a list of prerequisites you specified and versions we 
managed to load:
                                
	  Module Name                        Have     Want
	  Class::Accessor::Fast              0.31     0.31

******************************** NOTE ********************************
The comments above are created mechanically, possibly without manual
checking by the sender.  As there are many people performing automatic
tests on each upload to CPAN, it is likely that you will receive 
identical messages about the same problem.

If you believe that the message is mistaken, please reply to the first
one with correction and/or additional informations, and do not take
it personally.  We appreciate your patience. :)
**********************************************************************

Additional comments:
 

This report was machine-generated by CPAN::YACSmoke 0.03.

--

Summary of my perl5 (revision 5 version 8 subversion 8) configuration:
  Platform:
    osname=linux, osvers=2.6.22.10, archname=x86_64-linux-thread-multi-ld
    uname='linux rinse 2.6.22.10 #1 smp sun oct 28 13:30:11 cst 2007 x86_64 gnulinux '
    config_args='-d -Dusethreads -Dcc=gcc -Duselongdouble -Doptimize=-g -O3 -Duse64bitint -Duse64bitall -Dprefix=/opt/perl/testers -Dd_dosuid -Dinc_version_list=none -Acccdlflags=-fPIC -Duseshrplib=true -Dcf_email=imacat@mail.imacat.idv.tw'
    hint=recommended, useposix=true, d_sigaction=define
    usethreads=define use5005threads=undef useithreads=define usemultiplicity=define
    useperlio=define d_sfio=undef uselargefiles=define usesocks=undef
    use64bitint=define use64bitall=define uselongdouble=define
    usemymalloc=n, bincompat5005=undef
  Compiler:
    cc='gcc', ccflags ='-D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS -DDEBUGGING -fno-strict-aliasing -pipe -Wdeclaration-after-statement -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64',
    optimize='-g -O3',
    cppflags='-D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS -DDEBUGGING -fno-strict-aliasing -pipe -Wdeclaration-after-statement -I/usr/local/include'
    ccversion='', gccversion='4.1.2 20061115 (prerelease) (Debian 4.1.1-21)', gccosandvers=''
    intsize=4, longsize=8, ptrsize=8, doublesize=8, byteorder=12345678
    d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=16
    ivtype='long', ivsize=8, nvtype='long double', nvsize=16, Off_t='off_t', lseeksize=8
    alignbytes=16, prototype=define
  Linker and Libraries:
    ld='gcc', ldflags =' -L/usr/local/lib'
    libpth=/usr/local/lib /lib /usr/lib
    libs=-lnsl -lgdbm -ldb -ldl -lm -lcrypt -lutil -lpthread -lc
    perllibs=-lnsl -ldl -lm -lcrypt -lutil -lpthread -lc
    libc=/lib/libc-2.3.6.so, so=so, useshrplib=true, libperl=libperl.so
    gnulibc_version='2.3.6'
  Dynamic Linking:
    dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E -Wl,-rpath,/opt/perl/testers/lib/5.8.8/x86_64-linux-thread-multi-ld/CORE'
    cccdlflags=' -fPIC', lddlflags='-shared -L/usr/local/lib'



Comments to Ask Bjørn Hansen at ask@perl.org | Group listing | About