FAIL libapreq2-2.08 i686-linux-64int 2.6.22-1-k7

This distribution has been tested as part of the cpan-testers
effort to test as many new uploads to CPAN as possible.  See
http://testers.cpan.org/

Please cc any replies to cpan-testers@perl.org to keep other
test volunteers informed and to prevent any duplicate effort.

--
Dear Joe Schaefer,
    
This is a computer-generated report for libapreq2-2.08
on perl 5.8.8, created by CPAN-Reporter-1.12. 

Thank you for uploading your work to CPAN.  However, there was a problem
testing your distribution.

If you think this report is invalid, please consult the CPAN Testers Wiki
for suggestions on how to avoid getting FAIL reports for missing library
or binary dependencies, unsupported operating systems, and so on:

http://cpantest.grango.org/wiki/CPANAuthorNotes

Sections of this report:

    * Tester comments
    * Program output
    * Prerequisites
    * Environment and other context

------------------------------
TESTER COMMENTS
------------------------------

Additional comments from tester: 

this report is from an automated smoke testing program
and was not reviewed by a human for accuracy

------------------------------
PROGRAM OUTPUT
------------------------------

Output from '/home/src/perl/repoperls/installed-perls/maint-5.8/pnDGtsd/perl-5.8.7@27040/bin/perl Makefile.PL':

perl: 5.8.8 ok
build/version_check.pl failed: no version_string found in '' for 'mod_perl2'.
Please upgrade mod_perl2 first.
Can't locate Apache/Test.pm in @INC (@INC contains: /home/src/perl/repoperls/installed-perls/maint-5.8/pnDGtsd/perl-5.8.7@27040/lib/5.8.8/i686-linux-64int /home/src/perl/repoperls/installed-perls/maint-5.8/pnDGtsd/perl-5.8.7@27040/lib/5.8.8 /home/src/perl/repoperls/installed-perls/maint-5.8/pnDGtsd/perl-5.8.7@27040/lib/site_perl/5.8.8/i686-linux-64int /home/src/perl/repoperls/installed-perls/maint-5.8/pnDGtsd/perl-5.8.7@27040/lib/site_perl/5.8.8 /home/src/perl/repoperls/installed-perls/maint-5.8/pnDGtsd/perl-5.8.7@27040/lib/site_perl .) at build/version_check.pl line 27.
Please upgrade Apache::Test first.
ExtUtils::MakeMaker: 6.44 ok
build/version_check.pl failed: no version_string found in '' for 'ExtUtils::XSBuilder'.
Please upgrade ExtUtils::XSBuilder first.
Test::More: 0.78 ok
Use of uninitialized value in concatenation (.) or string at Makefile.PL line 91.
./configure --enable-perl-glue --with-apache2-apxs="" --with-perl="/home/src/perl/repoperls/installed-perls/maint-5.8/pnDGtsd/perl-5.8.7@27040/bin/perl"
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking whether make sets $(MAKE)... (cached) yes
checking for gcc... gcc
checking for C compiler default output file name... a.out
checking whether the C compiler works... yes
checking whether we are cross compiling... no
checking for suffix of executables... 
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ANSI C... none needed
checking for style of include used by make... GNU
checking dependency style of gcc... gcc3
checking build system type... i686-pc-linux-gnu
checking host system type... i686-pc-linux-gnu
checking for a sed that does not truncate output... /bin/sed
checking for egrep... grep -E
checking for ld used by gcc... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking for /usr/bin/ld option to reload object files... -r
checking for BSD-compatible nm... /usr/bin/nm -B
checking whether ln -s works... yes
checking how to recognise dependent libraries... pass_all
checking how to run the C preprocessor... gcc -E
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking dlfcn.h usability... yes
checking dlfcn.h presence... yes
checking for dlfcn.h... yes
checking for g++... g++
checking whether we are using the GNU C++ compiler... yes
checking whether g++ accepts -g... yes
checking dependency style of g++... gcc3
checking how to run the C++ preprocessor... g++ -E
checking for g77... g77
checking whether we are using the GNU Fortran 77 compiler... yes
checking whether g77 accepts -g... yes
checking the maximum length of command line arguments... 32768
checking command to parse /usr/bin/nm -B output from gcc object... ok
checking for objdir... .libs
checking for ar... ar
checking for ranlib... ranlib
checking for strip... strip
checking if gcc supports -fno-rtti -fno-exceptions... no
checking for gcc option to produce PIC... -fPIC
checking if gcc PIC flag -fPIC works... yes
checking if gcc static flag -static works... yes
checking if gcc supports -c -o file.o... yes
checking whether the gcc linker (/usr/bin/ld) supports shared libraries... yes
checking whether -lc should be explicitly linked in... no
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... yes
configure: creating libtool
appending configuration tag "CXX" to libtool
checking for ld used by g++... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking whether the g++ linker (/usr/bin/ld) supports shared libraries... yes
checking for g++ option to produce PIC... -fPIC
checking if g++ PIC flag -fPIC works... yes
checking if g++ static flag -static works... yes
checking if g++ supports -c -o file.o... yes
checking whether the g++ linker (/usr/bin/ld) supports shared libraries... yes
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
appending configuration tag "F77" to libtool
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... yes
checking for g77 option to produce PIC... -fPIC
checking if g77 PIC flag -fPIC works... yes
checking if g77 static flag -static works... yes
checking if g77 supports -c -o file.o... yes
checking whether the g77 linker (/usr/bin/ld) supports shared libraries... yes
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking for ranlib... (cached) ranlib
checking for a BSD-compatible install... /usr/bin/install -c
checking whether ln -s works... yes
checking whether to enable maintainer-specific portions of Makefiles... no
./configure: line 18952: -q: command not found
./configure: line 18966: -q: command not found
./configure: line 18970: -q: command not found
./configure: line 18974: -q: command not found
./configure: line 18974: -q: command not found
build/version_check.pl failed: no version_string found in '' for 'apache2'.
configure: error: Bad apache2 binary (/)

------------------------------
PREREQUISITES
------------------------------

Prerequisite modules loaded:

    No requirements found

------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------

Environment variables:

    AUTOMATED_TESTING = 1
    LANG = de_DE.UTF-8
    PATH = /usr/lib/ccache:/home/sand/bin:/usr/local/bin:/usr/bin:/bin:/usr/bin/X11:/usr/games:/usr/local/perl/bin:/usr/X11/bin:/sbin:/usr/sbin
    PERL5LIB = 
    PERL5OPT = 
    PERL5_CPANPLUS_IS_RUNNING = 3481
    PERL5_CPAN_IS_EXECUTING = /home/sand/.cpan/build/libapreq2-2.08-eAgBwV/Makefile.PL
    PERL5_CPAN_IS_RUNNING = 3481
    PERL_MM_USE_DEFAULT = 1
    SHELL = /usr/bin/zsh
    TERM = screen

Perl special variables (and OS-specific diagnostics, for MSWin32):

    $^X = /home/src/perl/repoperls/installed-perls/maint-5.8/pnDGtsd/perl-5.8.7@27040/bin/perl
    $UID/$EUID = 1005 / 1005
    $GID = 1005 1005
    $EGID = 1005 1005

Perl module toolchain versions installed:

    Module              Have   
    ------------------- -------
    CPAN                1.92_59
    Cwd                 3.2701 
    ExtUtils::CBuilder  0.22   
    ExtUtils::Command   1.14   
    ExtUtils::Install   1.45   
    ExtUtils::MakeMaker 6.44   
    ExtUtils::Manifest  1.51   
    ExtUtils::ParseXS   2.19   
    File::Spec          3.2701 
    Module::Build       0.2808 
    Module::Signature   0.55   
    Test::Harness       3.10   
    Test::More          0.78   
    YAML                0.66   
    YAML::Syck          1.04   
    version             0.74   


--

Summary of my perl5 (revision 5 version 8 subversion 8) configuration:
  Platform:
    osname=linux, osvers=2.6.22-1-k7, archname=i686-linux-64int
    uname='linux k75 2.6.22-1-k7 #1 smp sun jul 29 15:15:55 utc 2007 i686 gnulinux '
    config_args='-Dprefix=/home/src/perl/repoperls/installed-perls/maint-5.8/pnDGtsd/perl-5.8.7@27040 -Dinstallusrbinperl=n -Uversiononly -Dusedevel -des -Ui_db -Duse64bitint'
    hint=recommended, useposix=true, d_sigaction=define
    usethreads=undef use5005threads=undef useithreads=undef usemultiplicity=undef
    useperlio=define d_sfio=undef uselargefiles=define usesocks=undef
    use64bitint=define use64bitall=undef uselongdouble=undef
    usemymalloc=n, bincompat5005=undef
  Compiler:
    cc='cc', ccflags ='-fno-strict-aliasing -pipe -Wdeclaration-after-statement -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64',
    optimize='-O2',
    cppflags='-fno-strict-aliasing -pipe -Wdeclaration-after-statement -I/usr/local/include'
    ccversion='', gccversion='4.1.2 20061115 (prerelease) (Debian 4.1.1-21)', gccosandvers=''
    intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=12345678
    d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=12
    ivtype='long long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8
    alignbytes=4, prototype=define
  Linker and Libraries:
    ld='cc', ldflags =' -L/usr/local/lib'
    libpth=/usr/local/lib /lib /usr/lib
    libs=-lnsl -lgdbm -ldb -ldl -lm -lcrypt -lutil -lc
    perllibs=-lnsl -ldl -lm -lcrypt -lutil -lc
    libc=/lib/libc-2.7.so, so=so, useshrplib=false, libperl=libperl.a
    gnulibc_version='2.7'
  Dynamic Linking:
    dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E'
    cccdlflags='-fpic', lddlflags='-shared -L/usr/local/lib'

• FAIL libapreq2-2.08 i686-linux-64int 2.6.22-1-k7 by andreas.koenig.gmwojprw
• FAIL libapreq2-2.08 i686-linux-64int 2.6.22-1-k7 by andreas.koenig.gmwojprw