FAIL OpenOffice-Parse-SXC-0.03 x86_64-linux-thread-multi-ld 2.6.22.10

This distribution has been tested as part of the cpan-testers
effort to test as many new uploads to CPAN as possible.  See
http://testers.cpan.org/

Please cc any replies to cpan-testers@perl.org to keep other
test volunteers informed and to prevent any duplicate effort.

--

Dear DCLEE,
    
This is a computer-generated error report created automatically by
CPANPLUS, version 0.84. Testers personal comments may appear 
at the end of this report.


Thank you for uploading your work to CPAN.  However, it appears that
there were some problems testing your distribution.

TEST RESULTS:

Below is the error stack from stage 'make test':

[MSG] [Thu Mar 20 14:44:57 2008] Trying to get 'ftp://cpan.cdpa.nsysu.edu.tw/Unix/Lang/CPAN/authors/id/D/DC/DCLEE/OpenOffice-Parse-SXC-0.03.tar.gz'
[MSG] [Thu Mar 20 14:44:59 2008] Trying to get 'ftp://cpan.cdpa.nsysu.edu.tw/Unix/Lang/CPAN/authors/id/D/DC/DCLEE/CHECKSUMS'
[MSG] [Thu Mar 20 14:44:59 2008] Checksum matches for 'OpenOffice-Parse-SXC-0.03.tar.gz'
[MSG] [Thu Mar 20 14:44:59 2008] Extracted 'OpenOffice-Parse-SXC-0.03/'
[MSG] [Thu Mar 20 14:44:59 2008] Extracted 'OpenOffice-Parse-SXC-0.03/bin/'
[MSG] [Thu Mar 20 14:44:59 2008] Extracted 'OpenOffice-Parse-SXC-0.03/bin/sxc2csv'
[MSG] [Thu Mar 20 14:44:59 2008] Extracted 'OpenOffice-Parse-SXC-0.03/test_data.sxc'
[MSG] [Thu Mar 20 14:44:59 2008] Extracted 'OpenOffice-Parse-SXC-0.03/t/'
[MSG] [Thu Mar 20 14:44:59 2008] Extracted 'OpenOffice-Parse-SXC-0.03/t/test_data.t'
[MSG] [Thu Mar 20 14:44:59 2008] Extracted 'OpenOffice-Parse-SXC-0.03/t/test.t'
[MSG] [Thu Mar 20 14:44:59 2008] Extracted 'OpenOffice-Parse-SXC-0.03/README'
[MSG] [Thu Mar 20 14:44:59 2008] Extracted 'OpenOffice-Parse-SXC-0.03/Makefile.PL'
[MSG] [Thu Mar 20 14:44:59 2008] Extracted 'OpenOffice-Parse-SXC-0.03/Changes'
[MSG] [Thu Mar 20 14:44:59 2008] Extracted 'OpenOffice-Parse-SXC-0.03/MANIFEST'
[MSG] [Thu Mar 20 14:44:59 2008] Extracted 'OpenOffice-Parse-SXC-0.03/SXC.pm'
[MSG] [Thu Mar 20 14:44:59 2008] Extracted 'OpenOffice::Parse::SXC' to '/opt/perl/testers/.cpanplus/5.8.8/build/OpenOffice-Parse-SXC-0.03'
[MSG] [Thu Mar 20 14:45:00 2008] Checking if your kit is complete...
Looks good
Writing Makefile for OpenOffice::Parse::SXC

[MSG] [Thu Mar 20 14:45:00 2008] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value'
[MSG] [Thu Mar 20 14:45:00 2008] cp SXC.pm blib/lib/OpenOffice/Parse/SXC.pm
Manifying blib/man1/sxc2csv.1
Manifying blib/man3/OpenOffice::Parse::SXC.3

[ERROR] [Thu Mar 20 14:45:00 2008] MAKE TEST failed: ¤£§Æ±æªº¸Ë¸m¿é¥X¤J±±¨î (ioctl) t/test...........Can't locate XML/Parser.pm in @INC (@INC contains: /opt/perl/testers/.cpanplus/5.8.8/build/OpenOffice-Parse-SXC-0.03/blib/lib /opt/perl/testers/.cpanplus/5.8.8/build/OpenOffice-Parse-SXC-0.03/blib/arch /home/imacat/lib/perl5 /opt/perl/testers/.cpanplus/5.8.8/build/OpenOffice-Parse-SXC-0.03/blib/lib /opt/perl/testers/.cpanplus/5.8.8/build/OpenOffice-Parse-SXC-0.03/blib/arch /opt/perl/testers/.cpanplus/5.8.8/build/OpenOffice-Parse-SXC-0.03/blib /opt/perl/testers/lib/5.8.8/x86_64-linux-thread-multi-ld /opt/perl/testers/lib/5.8.8 /opt/perl/testers/lib/site_perl/5.8.8/x86_64-linux-thread-multi-ld /opt/perl/testers/lib/site_perl/5.8.8 /opt/perl/testers/lib/site_perl .) at /opt/perl/testers/.cpanplus/5.8.8/build/OpenOffice-Parse-SXC-0.03/blib/lib/OpenOffice/Parse/SXC.pm line 6.
BEGIN failed--compilation aborted at /opt/perl/testers/.cpanplus/5.8.8/build/OpenOffice-Parse-SXC-0.03/blib/lib/OpenOffice/Parse/SXC.pm line 6.
Compilation failed in require at t/test.t line 10.
BEGIN failed--compilation aborted at t/test.t line 10.
 Dubious, test returned 2 (wstat 512, 0x200)
 Failed 7/7 subtests 
t/test_data......Can't locate XML/Parser.pm in @INC (@INC contains: /opt/perl/testers/.cpanplus/5.8.8/build/OpenOffice-Parse-SXC-0.03/blib/lib /opt/perl/testers/.cpanplus/5.8.8/build/OpenOffice-Parse-SXC-0.03/blib/arch /home/imacat/lib/perl5 /opt/perl/testers/.cpanplus/5.8.8/build/OpenOffice-Parse-SXC-0.03/blib/lib /opt/perl/testers/.cpanplus/5.8.8/build/OpenOffice-Parse-SXC-0.03/blib/arch /opt/perl/testers/.cpanplus/5.8.8/build/OpenOffice-Parse-SXC-0.03/blib /opt/perl/testers/lib/5.8.8/x86_64-linux-thread-multi-ld /opt/perl/testers/lib/5.8.8 /opt/perl/testers/lib/site_perl/5.8.8/x86_64-linux-thread-multi-ld /opt/perl/testers/lib/site_perl/5.8.8 /opt/perl/testers/lib/site_perl .) at /opt/perl/testers/.cpanplus/5.8.8/build/OpenOffice-Parse-SXC-0.03/blib/lib/OpenOffice/Parse/SXC.pm line 6.
BEGIN failed--compilation aborted at /opt/perl/testers/.cpanplus/5.8.8/build/OpenOffice-Parse-SXC-0.03/blib/lib/OpenOffice/Parse/SXC.pm line 6.
Compilation failed in require at t/test_data.t line 10.
BEGIN failed--compilation aborted at t/test_data.t line 10.
 Dubious, test returned 2 (wstat 512, 0x200)
 Failed 60/60 subtests 

Test Summary Report
-------------------
t/test.t     (Wstat: 512 Tests: 0 Failed: 0)
  Non-zero exit status: 2
  Parse errors: Bad plan.  You planned 7 tests but ran 0.
t/test_data.t (Wstat: 512 Tests: 0 Failed: 0)
  Non-zero exit status: 2
  Parse errors: Bad plan.  You planned 60 tests but ran 0.
Files=2, Tests=0,  0 wallclock secs ( 0.02 usr  0.01 sys +  0.02 cusr  0.00 csys =  0.05 CPU)
Result: FAIL
Failed 2/2 test programs. 0/0 subtests failed.
make: *** [test_dynamic] Error 2

[MSG] [Thu Mar 20 14:45:00 2008] DEFAULT 'proceed_on_test_failure' HANDLER RETURNING 'sub return value'


MISSING PREREQUISITES:

It was observed that the test suite seem to fail without these modules:

XML::Parser

As such, adding the prerequisite module(s) to 'PREREQ_PM' in your
Makefile.PL should solve this problem.  For example:

WriteMakefile(
    AUTHOR      => 'DCLEE (cpanplus-info@lists.sf.net)',
    ... # other information
    PREREQ_PM   => {
	'XML::Parser'	=> '0', # or a minimum working version
    }
);

If you are interested in making a more flexible Makefile.PL that can
probe for missing dependencies and install them, ExtUtils::AutoInstall
at <http://search.cpan.org/dist/ExtUtils-AutoInstall/> may be
worth a look.

Thanks! :-)


******************************** NOTE ********************************
The comments above are created mechanically, possibly without manual
checking by the sender.  As there are many people performing automatic
tests on each upload to CPAN, it is likely that you will receive 
identical messages about the same problem.

If you believe that the message is mistaken, please reply to the first
one with correction and/or additional informations, and do not take
it personally.  We appreciate your patience. :)
**********************************************************************

Additional comments:
 

This report was machine-generated by CPAN::YACSmoke 0.03.

--

Summary of my perl5 (revision 5 version 8 subversion 8) configuration:
  Platform:
    osname=linux, osvers=2.6.22.10, archname=x86_64-linux-thread-multi-ld
    uname='linux rinse 2.6.22.10 #1 smp sun oct 28 13:30:11 cst 2007 x86_64 gnulinux '
    config_args='-d -Dusethreads -Dcc=gcc -Duselongdouble -Doptimize=-g -O3 -Duse64bitint -Duse64bitall -Dprefix=/opt/perl/testers -Dd_dosuid -Dinc_version_list=none -Acccdlflags=-fPIC -Duseshrplib=true -Dcf_email=imacat@mail.imacat.idv.tw'
    hint=recommended, useposix=true, d_sigaction=define
    usethreads=define use5005threads=undef useithreads=define usemultiplicity=define
    useperlio=define d_sfio=undef uselargefiles=define usesocks=undef
    use64bitint=define use64bitall=define uselongdouble=define
    usemymalloc=n, bincompat5005=undef
  Compiler:
    cc='gcc', ccflags ='-D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS -DDEBUGGING -fno-strict-aliasing -pipe -Wdeclaration-after-statement -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64',
    optimize='-g -O3',
    cppflags='-D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS -DDEBUGGING -fno-strict-aliasing -pipe -Wdeclaration-after-statement -I/usr/local/include'
    ccversion='', gccversion='4.1.2 20061115 (prerelease) (Debian 4.1.1-21)', gccosandvers=''
    intsize=4, longsize=8, ptrsize=8, doublesize=8, byteorder=12345678
    d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=16
    ivtype='long', ivsize=8, nvtype='long double', nvsize=16, Off_t='off_t', lseeksize=8
    alignbytes=16, prototype=define
  Linker and Libraries:
    ld='gcc', ldflags =' -L/usr/local/lib'
    libpth=/usr/local/lib /lib /usr/lib
    libs=-lnsl -lgdbm -ldb -ldl -lm -lcrypt -lutil -lpthread -lc
    perllibs=-lnsl -ldl -lm -lcrypt -lutil -lpthread -lc
    libc=/lib/libc-2.3.6.so, so=so, useshrplib=true, libperl=libperl.so
    gnulibc_version='2.3.6'
  Dynamic Linking:
    dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E -Wl,-rpath,/opt/perl/testers/lib/5.8.8/x86_64-linux-thread-multi-ld/CORE'
    cccdlflags=' -fPIC', lddlflags='-shared -L/usr/local/lib'

• FAIL OpenOffice-Parse-SXC-0.03 x86_64-linux-thread-multi-ld 2.6.22.10 by imacat