Front page | perl.cpan.testers |
Postings from March 2008
FAIL Verby-0.03 i686-linux-thread-multi 2.6.22-1-k7
From:
andreas.koenig.gmwojprw
Date:
March 30, 2008 11:36
Subject:
FAIL Verby-0.03 i686-linux-thread-multi 2.6.22-1-k7
This distribution has been tested as part of the cpan-testers
effort to test as many new uploads to CPAN as possible. See
http://testers.cpan.org/
Please cc any replies to cpan-testers@perl.org to keep other
test volunteers informed and to prevent any duplicate effort.
--
Dear Yuval Kogman,
This is a computer-generated report for Verby-0.03
on perl 5.8.8 patch 33430, created by CPAN-Reporter-1.13.
Thank you for uploading your work to CPAN. However, there was a problem
testing your distribution.
If you think this report is invalid, please consult the CPAN Testers Wiki
for suggestions on how to avoid getting FAIL reports for missing library
or binary dependencies, unsupported operating systems, and so on:
http://cpantest.grango.org/wiki/CPANAuthorNotes
Sections of this report:
* Tester comments
* Program output
* Prerequisites
* Environment and other context
------------------------------
TESTER COMMENTS
------------------------------
Additional comments from tester:
this report is from an automated smoke testing program
and was not reviewed by a human for accuracy
------------------------------
PROGRAM OUTPUT
------------------------------
Output from '/usr/bin/make test':
PERL_DL_NONLAZY=1 /home/src/perl/repoperls/installed-perls/maint-5.8/pB3dGVG/perl-5.8.8@33430/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
t/00_dist....................
# Failed test 'use Verby::Dispatcher;'
# at /home/src/perl/repoperls/installed-perls/maint-5.8/pB3dGVG/perl-5.8.8@33430/lib/site_perl/5.8.8/Test/Distribution.pm line 177.
# Tried to use 'Verby::Dispatcher'.
# Error: Can't locate Algorithm/Dependency/Objects/Ordered.pm in @INC (@INC contains: /home/sand/.cpan/build/Verby-0.03-nV6wtT/blib/lib /home/sand/.cpan/build/Verby-0.03-nV6wtT/blib/arch /home/src/perl/repoperls/installed-perls/maint-5.8/pB3dGVG/perl-5.8.8@33430/lib/5.8.8/i686-linux-thread-multi /home/src/perl/repoperls/installed-perls/maint-5.8/pB3dGVG/perl-5.8.8@33430/lib/5.8.8 /home/src/perl/repoperls/installed-perls/maint-5.8/pB3dGVG/perl-5.8.8@33430/lib/site_perl/5.8.8/i686-linux-thread-multi /home/src/perl/repoperls/installed-perls/maint-5.8/pB3dGVG/perl-5.8.8@33430/lib/site_perl/5.8.8 .) at /home/sand/.cpan/build/Verby-0.03-nV6wtT/blib/lib/Verby/Dispatcher.pm line 12.
# BEGIN failed--compilation aborted at /home/sand/.cpan/build/Verby-0.03-nV6wtT/blib/lib/Verby/Dispatcher.pm line 12.
# Compilation failed in require at (eval 114) line 2.
# BEGIN failed--compilation aborted at (eval 114) line 2.
# Failed test 'use Verby::Config::Source::ARGV;'
# at /home/src/perl/repoperls/installed-perls/maint-5.8/pB3dGVG/perl-5.8.8@33430/lib/site_perl/5.8.8/Test/Distribution.pm line 177.
# Tried to use 'Verby::Config::Source::ARGV'.
# Error: Can't locate Getopt/Casual.pm in @INC (@INC contains: /home/sand/.cpan/build/Verby-0.03-nV6wtT/blib/lib /home/sand/.cpan/build/Verby-0.03-nV6wtT/blib/arch /home/src/perl/repoperls/installed-perls/maint-5.8/pB3dGVG/perl-5.8.8@33430/lib/5.8.8/i686-linux-thread-multi /home/src/perl/repoperls/installed-perls/maint-5.8/pB3dGVG/perl-5.8.8@33430/lib/5.8.8 /home/src/perl/repoperls/installed-perls/maint-5.8/pB3dGVG/perl-5.8.8@33430/lib/site_perl/5.8.8/i686-linux-thread-multi /home/src/perl/repoperls/installed-perls/maint-5.8/pB3dGVG/perl-5.8.8@33430/lib/site_perl/5.8.8 .) at /home/sand/.cpan/build/Verby-0.03-nV6wtT/blib/lib/Verby/Config/Source/ARGV.pm line 10.
# BEGIN failed--compilation aborted at /home/sand/.cpan/build/Verby-0.03-nV6wtT/blib/lib/Verby/Config/Source/ARGV.pm line 10.
# Compilation failed in require at (eval 205) line 2.
# BEGIN failed--compilation aborted at (eval 205) line 2.
# Failed test 'POD test for blib/lib/Verby/Action.pm'
# at /home/src/perl/repoperls/installed-perls/maint-5.8/pB3dGVG/perl-5.8.8@33430/lib/site_perl/5.8.8/Test/Distribution.pm line 144.
# blib/lib/Verby/Action.pm (117): =back without =over
# Looks like you failed 3 tests of 56.
Dubious, test returned 3 (wstat 768, 0x300)
Failed 3/56 subtests
(less 1 skipped subtest: 52 okay)
t/00_use.....................
# Failed test 'use Verby::Dispatcher;'
# at t/00_use.t line 14.
# Tried to use 'Verby::Dispatcher'.
# Error: Can't locate Algorithm/Dependency/Objects/Ordered.pm in @INC (@INC contains: /home/sand/.cpan/build/Verby-0.03-nV6wtT/blib/lib /home/sand/.cpan/build/Verby-0.03-nV6wtT/blib/arch /home/src/perl/repoperls/installed-perls/maint-5.8/pB3dGVG/perl-5.8.8@33430/lib/5.8.8/i686-linux-thread-multi /home/src/perl/repoperls/installed-perls/maint-5.8/pB3dGVG/perl-5.8.8@33430/lib/5.8.8 /home/src/perl/repoperls/installed-perls/maint-5.8/pB3dGVG/perl-5.8.8@33430/lib/site_perl/5.8.8/i686-linux-thread-multi /home/src/perl/repoperls/installed-perls/maint-5.8/pB3dGVG/perl-5.8.8@33430/lib/site_perl/5.8.8 .) at /home/sand/.cpan/build/Verby-0.03-nV6wtT/blib/lib/Verby/Dispatcher.pm line 12.
# BEGIN failed--compilation aborted at /home/sand/.cpan/build/Verby-0.03-nV6wtT/blib/lib/Verby/Dispatcher.pm line 12.
# Compilation failed in require at (eval 8) line 2.
# BEGIN failed--compilation aborted at (eval 8) line 2.
# Looks like you failed 1 test of 23.
Dubious, test returned 1 (wstat 256, 0x100)
Failed 1/23 subtests
t/action.....................ok
t/action_analyze_file........ok
t/action_buildtool...........AAAAAAAHHH Running proces!$VAR1 = {
'id_to_wheel' => {
'1' => bless( [
1,
'error',
'close',
sub { "DUMMY" },
22035,
'pipe',
0,
0,
undef,
undef,
bless( do{\(my $o = '')}, 'POE::Filter::Stream' ),
bless( [
[],
0,
0,
65536,
0
], 'POE::Driver::SysRW' ),
'stdin',
'POE::Wheel::Run(1) -> select stdin',
0,
\*Symbol::GEN5,
bless( do{\(my $o = '')}, 'POE::Filter::Stream' ),
$VAR1->{'id_to_wheel'}{'1'}[11],
'stdout',
'POE::Wheel::Run(1) -> select stdout',
\*Symbol::GEN7,
bless( do{\(my $o = '')}, 'POE::Filter::Stream' ),
bless( [
[],
0,
0,
65536,
0
], 'POE::Driver::SysRW' ),
'stderr',
'POE::Wheel::Run(1) -> select stderr'
], 'POE::Wheel::Run' )
},
'cli' => [
'/home/src/perl/repoperls/installed-perls/maint-5.8/pB3dGVG/perl-5.8.8@33430/bin/perl',
'Makefile.PL'
],
'accum' => {
'stderr' => '',
'stdout' => 'GLOB(0x8151c94)moosen
'
},
'program_debug_string' => '\'/home/src/perl/repoperls/installed-perls/maint-5.8/pB3dGVG/perl-5.8.8@33430/bin/perl Makefile.PL\' with init block',
'log_stderr' => 1,
'init' => sub { "DUMMY" },
'c' => bless( {
'workdir' => bless( {
'file_spec_class' => undef,
'volume' => '',
'dirs' => [
'',
'tmp',
'iqNFEPeGnf'
]
}, 'Path::Class::Dir' ),
'error' => '/tmp/iqNFEPeGnf/Makefile doesn\'t exist',
'logger' => bless( {}, 'Test::MockObject' )
}, 'Hash::AsObject' ),
'pid_to_wheel' => {
'22035' => $VAR1->{'id_to_wheel'}{'1'}
}
};
# Looks like you planned 7 tests but only ran 3.
# Looks like your test died just after 3.
Dubious, test returned 255 (wstat 65280, 0xff00)
Failed 4/7 subtests
t/action_mkpath..............ok
t/action_mysql_createdb......ok
t/action_mysql_loaddata......skipped: cannot find module 'Time::Piece::MySQL'
t/action_runcmd..............skip() was passed a non-numeric number of tests. Did you get the arguments backwards? at t/action_runcmd.t line 53
skip() was passed a non-numeric number of tests. Did you get the arguments backwards? at t/action_runcmd.t line 67
# Failed test 'wc -l didn't die'
# at t/action_runcmd.t line 95.
# AAAAAAAHHH Running proces!$VAR1 = {
# 'id_to_wheel' => {
# '1' => bless( [
# 1,
# 'error',
# 'close',
# [
# '/usr/bin/wc',
# '-l'
# ],
# 22040,
# 'pipe',
# 0,
# 0,
# undef,
# undef,
# bless( do{\(my $o = '')}, 'POE::Filter::Stream' ),
# bless( [
# [],
# 0,
# 0,
# 65536,
# 0
# ], 'POE::Driver::SysRW' ),
# 'stdin',
# 'POE::Wheel::Run(1) -> select stdin',
# 0,
# \*Symbol::GEN4,
# bless( do{\(my $o = '')}, 'POE::Filter::Stream' ),
# $VAR1->{'id_to_wheel'}{'1'}[11],
# 'stdout',
# 'POE::Wheel::Run(1) -> select stdout',
# \*Symbol::GEN6,
# bless( do{\(my $o = '')}, 'POE::Filter::Stream' ),
# bless( [
# [],
# 0,
# 0,
# 65536,
# 0
# ], 'POE::Driver::SysRW' ),
# 'stderr',
# 'POE::Wheel::Run(1) -> select stderr'
# ], 'POE::Wheel::Run' )
# },
# 'cli' => $VAR1->{'id_to_wheel'}{'1'}[3],
# 'accum' => {
# 'stderr' => '',
# 'stdout' => '3
# '
# },
# 'program_debug_string' => '\'/usr/bin/wc -l\'',
# 'log_stderr' => 1,
# 'c' => bless( {
# 'logger' => bless( {}, 'Test::MockObject' )
# }, 'Hash::AsObject' ),
# 'in' => undef,
# 'pid_to_wheel' => {
# '22040' => $VAR1->{'id_to_wheel'}{'1'}
# }
# };
# Failed test 'command verified'
# at t/action_runcmd.t line 96.
# Failed test 'output of wc -l looks sane'
# at t/action_runcmd.t line 98.
# undef
# doesn't match '(?-xism:^\s*\d+\s*$)'
# Failed test 'command verified'
# at t/action_runcmd.t line 115.
Use of uninitialized value in scalar chomp at t/action_runcmd.t line 118.
# Failed test 'stderr looks good'
# at t/action_runcmd.t line 119.
# got: undef
# expected: 'foo'
skip() was passed a non-numeric number of tests. Did you get the arguments backwards? at t/action_runcmd.t line 126
Label not found for "last SKIP" at /home/src/perl/repoperls/installed-perls/maint-5.8/pB3dGVG/perl-5.8.8@33430/lib/5.8.8/Test/More.pm line 1034.
# Looks like you planned 22 tests but only ran 17.
# Looks like you failed 5 tests of 17 run.
# Looks like your test died just after 17.
Dubious, test returned 255 (wstat 65280, 0xff00)
Failed 10/22 subtests
(less 3 skipped subtests: 9 okay)
t/action_template............Called UNIVERSAL::can() as a function, not a method at /home/src/perl/repoperls/installed-perls/maint-5.8/pB3dGVG/perl-5.8.8@33430/lib/site_perl/5.8.8/i686-linux-thread-multi/Template.pm line 160
Called UNIVERSAL::can() as a function, not a method at /home/src/perl/repoperls/installed-perls/maint-5.8/pB3dGVG/perl-5.8.8@33430/lib/site_perl/5.8.8/i686-linux-thread-multi/Template.pm line 160
ok
t/config_data................ok
t/config_data_mutable........ok
t/dispatch_async.............
# Failed test 'use Verby::Dispatcher;'
# at t/dispatch_async.t line 15.
# Tried to use 'Verby::Dispatcher'.
# Error: Can't locate Algorithm/Dependency/Objects/Ordered.pm in @INC (@INC contains: /home/sand/.cpan/build/Verby-0.03-nV6wtT/blib/lib /home/sand/.cpan/build/Verby-0.03-nV6wtT/blib/arch /home/src/perl/repoperls/installed-perls/maint-5.8/pB3dGVG/perl-5.8.8@33430/lib/5.8.8/i686-linux-thread-multi /home/src/perl/repoperls/installed-perls/maint-5.8/pB3dGVG/perl-5.8.8@33430/lib/5.8.8 /home/src/perl/repoperls/installed-perls/maint-5.8/pB3dGVG/perl-5.8.8@33430/lib/site_perl/5.8.8/i686-linux-thread-multi /home/src/perl/repoperls/installed-perls/maint-5.8/pB3dGVG/perl-5.8.8@33430/lib/site_perl/5.8.8 .) at /home/sand/.cpan/build/Verby-0.03-nV6wtT/blib/lib/Verby/Dispatcher.pm line 12.
# BEGIN failed--compilation aborted at /home/sand/.cpan/build/Verby-0.03-nV6wtT/blib/lib/Verby/Dispatcher.pm line 12.
# Compilation failed in require at (eval 102) line 2.
# BEGIN failed--compilation aborted at (eval 102) line 2.
Can't locate object method "config_hub" via package "Verby::Dispatcher" at t/dispatch_async.t line 45.
# Looks like you planned 24 tests but only ran 2.
# Looks like you failed 1 test of 2 run.
# Looks like your test died just after 2.
Dubious, test returned 255 (wstat 65280, 0xff00)
Failed 23/24 subtests
t/dispatch_async_stress......
# Failed test 'use Verby::Dispatcher;'
# at t/dispatch_async_stress.t line 15.
# Tried to use 'Verby::Dispatcher'.
# Error: Can't locate Algorithm/Dependency/Objects/Ordered.pm in @INC (@INC contains: /home/sand/.cpan/build/Verby-0.03-nV6wtT/blib/lib /home/sand/.cpan/build/Verby-0.03-nV6wtT/blib/arch /home/src/perl/repoperls/installed-perls/maint-5.8/pB3dGVG/perl-5.8.8@33430/lib/5.8.8/i686-linux-thread-multi /home/src/perl/repoperls/installed-perls/maint-5.8/pB3dGVG/perl-5.8.8@33430/lib/5.8.8 /home/src/perl/repoperls/installed-perls/maint-5.8/pB3dGVG/perl-5.8.8@33430/lib/site_perl/5.8.8/i686-linux-thread-multi /home/src/perl/repoperls/installed-perls/maint-5.8/pB3dGVG/perl-5.8.8@33430/lib/site_perl/5.8.8 .) at /home/sand/.cpan/build/Verby-0.03-nV6wtT/blib/lib/Verby/Dispatcher.pm line 12.
# BEGIN failed--compilation aborted at /home/sand/.cpan/build/Verby-0.03-nV6wtT/blib/lib/Verby/Dispatcher.pm line 12.
# Compilation failed in require at (eval 76) line 2.
# BEGIN failed--compilation aborted at (eval 76) line 2.
Can't locate object method "config_hub" via package "Verby::Dispatcher" at t/dispatch_async_stress.t line 57.
# Looks like you planned 7 tests but only ran 2.
# Looks like you failed 1 test of 2 run.
# Looks like your test died just after 2.
Dubious, test returned 255 (wstat 65280, 0xff00)
Failed 6/7 subtests
t/dispatch_presatisfied......
# Failed test 'use Verby::Dispatcher;'
# at t/dispatch_presatisfied.t line 13.
# Tried to use 'Verby::Dispatcher'.
# Error: Can't locate Algorithm/Dependency/Objects/Ordered.pm in @INC (@INC contains: /home/sand/.cpan/build/Verby-0.03-nV6wtT/blib/lib /home/sand/.cpan/build/Verby-0.03-nV6wtT/blib/arch /home/src/perl/repoperls/installed-perls/maint-5.8/pB3dGVG/perl-5.8.8@33430/lib/5.8.8/i686-linux-thread-multi /home/src/perl/repoperls/installed-perls/maint-5.8/pB3dGVG/perl-5.8.8@33430/lib/5.8.8 /home/src/perl/repoperls/installed-perls/maint-5.8/pB3dGVG/perl-5.8.8@33430/lib/site_perl/5.8.8/i686-linux-thread-multi /home/src/perl/repoperls/installed-perls/maint-5.8/pB3dGVG/perl-5.8.8@33430/lib/site_perl/5.8.8 .) at /home/sand/.cpan/build/Verby-0.03-nV6wtT/blib/lib/Verby/Dispatcher.pm line 12.
# BEGIN failed--compilation aborted at /home/sand/.cpan/build/Verby-0.03-nV6wtT/blib/lib/Verby/Dispatcher.pm line 12.
# Compilation failed in require at (eval 76) line 2.
# BEGIN failed--compilation aborted at (eval 76) line 2.
Can't locate object method "config_hub" via package "Verby::Dispatcher" at t/dispatch_presatisfied.t line 33.
# Looks like you planned 61 tests but only ran 2.
# Looks like you failed 1 test of 2 run.
# Looks like your test died just after 2.
Dubious, test returned 255 (wstat 65280, 0xff00)
Failed 60/61 subtests
t/dispatch_simple............
# Failed test 'use Verby::Dispatcher;'
# at t/dispatch_simple.t line 15.
# Tried to use 'Verby::Dispatcher'.
# Error: Can't locate Algorithm/Dependency/Objects/Ordered.pm in @INC (@INC contains: t/lib /home/sand/.cpan/build/Verby-0.03-nV6wtT/blib/lib /home/sand/.cpan/build/Verby-0.03-nV6wtT/blib/arch /home/src/perl/repoperls/installed-perls/maint-5.8/pB3dGVG/perl-5.8.8@33430/lib/5.8.8/i686-linux-thread-multi /home/src/perl/repoperls/installed-perls/maint-5.8/pB3dGVG/perl-5.8.8@33430/lib/5.8.8 /home/src/perl/repoperls/installed-perls/maint-5.8/pB3dGVG/perl-5.8.8@33430/lib/site_perl/5.8.8/i686-linux-thread-multi /home/src/perl/repoperls/installed-perls/maint-5.8/pB3dGVG/perl-5.8.8@33430/lib/site_perl/5.8.8 .) at /home/sand/.cpan/build/Verby-0.03-nV6wtT/blib/lib/Verby/Dispatcher.pm line 12.
# BEGIN failed--compilation aborted at /home/sand/.cpan/build/Verby-0.03-nV6wtT/blib/lib/Verby/Dispatcher.pm line 12.
# Compilation failed in require at (eval 76) line 2.
# BEGIN failed--compilation aborted at (eval 76) line 2.
Can't locate object method "config_hub" via package "Verby::Dispatcher" at t/dispatch_simple.t line 32.
# Looks like you planned 20 tests but only ran 2.
# Looks like you failed 1 test of 2 run.
# Looks like your test died just after 2.
Dubious, test returned 255 (wstat 65280, 0xff00)
Failed 19/20 subtests
t/step_closure...............Attribute (post) does not pass the type constraint because: Validation failed for 'CodeRef' failed with value undef at /home/src/perl/repoperls/installed-perls/maint-5.8/pB3dGVG/perl-5.8.8@33430/lib/site_perl/5.8.8/Moose/Meta/Attribute.pm line 266
Moose::Meta::Attribute::initialize_instance_slot('Moose::Meta::Attribute=HASH(0x8847c64)', 'Moose::Meta::Instance=HASH(0x88c8a3c)', 'Verby::Step::Closure=HASH(0x88c85d4)', 'HASH(0x8698e28)') called at /home/src/perl/repoperls/installed-perls/maint-5.8/pB3dGVG/perl-5.8.8@33430/lib/site_perl/5.8.8/Moose/Meta/Class.pm line 142
Moose::Meta::Class::construct_instance('Moose::Meta::Class=HASH(0x881e3f0)', 'pre', undef, 'post', undef, 'action', 'Test::MockObject=HASH(0x8151db4)') called at /home/src/perl/repoperls/installed-perls/maint-5.8/pB3dGVG/perl-5.8.8@33430/lib/site_perl/5.8.8/i686-linux-thread-multi/Class/MOP/Class.pm line 344
Class::MOP::Class::new_object('Moose::Meta::Class=HASH(0x881e3f0)', 'pre', undef, 'post', undef, 'action', 'Test::MockObject=HASH(0x8151db4)') called at /home/src/perl/repoperls/installed-perls/maint-5.8/pB3dGVG/perl-5.8.8@33430/lib/site_perl/5.8.8/Moose/Meta/Class.pm line 122
Moose::Meta::Class::new_object('Moose::Meta::Class=HASH(0x881e3f0)', 'action', 'Test::MockObject=HASH(0x8151db4)', 'post', undef, 'pre', undef) called at /home/src/perl/repoperls/installed-perls/maint-5.8/pB3dGVG/perl-5.8.8@33430/lib/site_perl/5.8.8/Moose/Object.pm line 28
Moose::Object::new('Verby::Step::Closure', 'pre', undef, 'post', undef, 'action', 'Test::MockObject=HASH(0x8151db4)') called at /home/sand/.cpan/build/Verby-0.03-nV6wtT/blib/lib/Verby/Step/Closure.pm line 98
Verby::Step::Closure::step('Test::MockObject=HASH(0x8151db4)') called at t/step_closure.t line 20
# Looks like you planned 19 tests but only ran 1.
# Looks like your test died just after 1.
Dubious, test returned 255 (wstat 65280, 0xff00)
Failed 18/19 subtests
Test Summary Report
-------------------
t/00_dist.t (Wstat: 768 Tests: 56 Failed: 3)
Failed tests: 6, 25, 31
Non-zero exit status: 3
t/00_use.t (Wstat: 256 Tests: 23 Failed: 1)
Failed test: 2
Non-zero exit status: 1
t/action_buildtool.t (Wstat: 65280 Tests: 3 Failed: 0)
Non-zero exit status: 255
Parse errors: Bad plan. You planned 7 tests but ran 3.
t/action_runcmd.t (Wstat: 65280 Tests: 17 Failed: 5)
Failed tests: 8-10, 14-15
Non-zero exit status: 255
Parse errors: Bad plan. You planned 22 tests but ran 17.
t/dispatch_async.t (Wstat: 65280 Tests: 2 Failed: 1)
Failed test: 1
Non-zero exit status: 255
Parse errors: Bad plan. You planned 24 tests but ran 2.
t/dispatch_async_stress.t (Wstat: 65280 Tests: 2 Failed: 1)
Failed test: 1
Non-zero exit status: 255
Parse errors: Bad plan. You planned 7 tests but ran 2.
t/dispatch_presatisfied.t (Wstat: 65280 Tests: 2 Failed: 1)
Failed test: 1
Non-zero exit status: 255
Parse errors: Bad plan. You planned 61 tests but ran 2.
t/dispatch_simple.t (Wstat: 65280 Tests: 2 Failed: 1)
Failed test: 1
Non-zero exit status: 255
Parse errors: Bad plan. You planned 20 tests but ran 2.
t/step_closure.t (Wstat: 65280 Tests: 1 Failed: 0)
Non-zero exit status: 255
Parse errors: Bad plan. You planned 19 tests but ran 1.
Files=17, Tests=224, 25 wallclock secs ( 0.16 usr 0.04 sys + 21.31 cusr 1.00 csys = 22.51 CPU)
Result: FAIL
Failed 9/17 test programs. 13/224 subtests failed.
make: *** [test_dynamic] Fehler 255
------------------------------
PREREQUISITES
------------------------------
Prerequisite modules loaded:
requires:
Module Need Have
------------------- ---- ------
Class::Inspector 0 1.22
Devel::Caller::Perl 0 1.4
File::Temp 0 0.20
Hash::AsObject 0 0.10
List::MoreUtils 0 0.21
Log::Log4perl 0 1.15
POE 0.37 1.0000
Set::Object 1.17 1.22
Test::Deep 0 0.100
Test::Exception 0 0.27
Test::MockObject 0 1.08
Test::More 0 0.78
Test::Plan 0 0.03
Test::use::ok 0 0.02
------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------
Environment variables:
AUTOMATED_TESTING = 1
LANG = de_DE.UTF-8
PATH = /usr/lib/ccache:/home/sand/bin:/usr/local/bin:/usr/bin:/bin:/usr/bin/X11:/usr/games:/usr/local/perl/bin:/usr/X11/bin:/sbin:/usr/sbin
PERL5LIB =
PERL5OPT =
PERL5_CPANPLUS_IS_RUNNING = 21742
PERL5_CPAN_IS_RUNNING = 21742
PERL_MM_USE_DEFAULT = 1
SHELL = /usr/bin/zsh
TERM = screen
Perl special variables (and OS-specific diagnostics, for MSWin32):
$^X = /home/src/perl/repoperls/installed-perls/maint-5.8/pB3dGVG/perl-5.8.8@33430/bin/perl
$UID/$EUID = 1005 / 1005
$GID = 1005 1005
$EGID = 1005 1005
Perl module toolchain versions installed:
Module Have
------------------- -------
CPAN 1.92_60
Cwd 3.2701
ExtUtils::CBuilder 0.22
ExtUtils::Command 1.14
ExtUtils::Install 1.50
ExtUtils::MakeMaker 6.44
ExtUtils::Manifest 1.51_01
ExtUtils::ParseXS 2.18
File::Spec 3.2701
Module::Build 0.2808
Module::Signature 0.55
Test::Harness 3.10
Test::More 0.78
YAML 0.66
YAML::Syck 1.04
version 0.74
--
Summary of my perl5 (revision 5 version 8 subversion 8 patch 33430) configuration:
Platform:
osname=linux, osvers=2.6.22-1-k7, archname=i686-linux-thread-multi
uname='linux k75 2.6.22-1-k7 #1 smp sun jul 29 15:15:55 utc 2007 i686 gnulinux '
config_args='-Dprefix=/home/src/perl/repoperls/installed-perls/maint-5.8/pB3dGVG/perl-5.8.8@33430 -Dinstallusrbinperl=n -Uversiononly -Dusedevel -des -Ui_db -Dusethreads'
hint=recommended, useposix=true, d_sigaction=define
usethreads=define use5005threads=undef useithreads=define usemultiplicity=define
useperlio=define d_sfio=undef uselargefiles=define usesocks=undef
use64bitint=undef use64bitall=undef uselongdouble=undef
usemymalloc=n, bincompat5005=undef
Compiler:
cc='cc', ccflags ='-D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64',
optimize='-O2',
cppflags='-D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS -fno-strict-aliasing -pipe -I/usr/local/include'
ccversion='', gccversion='4.1.2 20061115 (prerelease) (Debian 4.1.1-21)', gccosandvers=''
intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=1234
d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=12
ivtype='long', ivsize=4, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8
alignbytes=4, prototype=define
Linker and Libraries:
ld='cc', ldflags =' -L/usr/local/lib'
libpth=/usr/local/lib /lib /usr/lib /usr/lib64
libs=-lnsl -lgdbm -ldb -ldl -lm -lcrypt -lutil -lpthread -lc
perllibs=-lnsl -ldl -lm -lcrypt -lutil -lpthread -lc
libc=/lib/libc-2.7.so, so=so, useshrplib=false, libperl=libperl.a
gnulibc_version='2.7'
Dynamic Linking:
dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E'
cccdlflags='-fPIC', lddlflags='-shared -O2 -L/usr/local/lib'
-
FAIL Verby-0.03 i686-linux-thread-multi 2.6.22-1-k7
by andreas.koenig.gmwojprw