FAIL tk-zinc-3.303 i686-linux-thread-multi-64int 2.6.22-1-k7

This distribution has been tested as part of the cpan-testers
effort to test as many new uploads to CPAN as possible.  See
http://testers.cpan.org/

Please cc any replies to cpan-testers@perl.org to keep other
test volunteers informed and to prevent any duplicate effort.

--
Dear zinc-dev,
    
This is a computer-generated report for tk-zinc-3.303
on perl 5.10.0 patch 33628, created by CPAN-Reporter-1.13. 

Thank you for uploading your work to CPAN.  However, there was a problem
testing your distribution.

If you think this report is invalid, please consult the CPAN Testers Wiki
for suggestions on how to avoid getting FAIL reports for missing library
or binary dependencies, unsupported operating systems, and so on:

http://cpantest.grango.org/wiki/CPANAuthorNotes

Sections of this report:

    * Tester comments
    * Program output
    * Prerequisites
    * Environment and other context

------------------------------
TESTER COMMENTS
------------------------------

Additional comments from tester: 

none provided

------------------------------
PROGRAM OUTPUT
------------------------------

Output from '/usr/bin/make test':

make[3]: Entering directory `/home/sand/.cpan/build/tk-zinc-3.303-bwQmV_'
make[4]: Entering directory `/home/sand/.cpan/build/tk-zinc-3.303-bwQmV_/demos'
make[4]: Leaving directory `/home/sand/.cpan/build/tk-zinc-3.303-bwQmV_/demos'
/home/src/perl/repoperls/installed-perls/maint-5.10/pecapvd/perl-5.10.0@33628/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
t/AnimatedGradient..............couldn't connect to display ":121" at /home/src/perl/repoperls/installed-perls/maint-5.10/pecapvd/perl-5.10.0@33628/lib/site_perl/5.10.0/i686-linux-thread-multi-64int/Tk/MainWindow.pm line 55.
MainWindow->new() at t/AnimatedGradient.t line 36
# Looks like your test died before it could output anything.
 Dubious, test returned 255 (wstat 65280, 0xff00)
 Failed 18/18 subtests 
t/Bbox-curve-multi-contour......couldn't connect to display ":121" at /home/src/perl/repoperls/installed-perls/maint-5.10/pecapvd/perl-5.10.0@33628/lib/site_perl/5.10.0/i686-linux-thread-multi-64int/Tk/MainWindow.pm line 55.
MainWindow->new() at t/Bbox-curve-multi-contour.t line 36
# Looks like your test died before it could output anything.
 Dubious, test returned 255 (wstat 65280, 0xff00)
 Failed 4/4 subtests 
t/Bbox..........................# No tests run!
 Dubious, test returned 255 (wstat 65280, 0xff00)
 Failed 11/12 subtests 
t/Coords........................# No tests run!
 Dubious, test returned 255 (wstat 65280, 0xff00)
 Failed 25/26 subtests 
t/find..........................# No tests run!
 Dubious, test returned 255 (wstat 65280, 0xff00)
 Failed 21/22 subtests 
t/Images........................# No tests run!
 Dubious, test returned 255 (wstat 65280, 0xff00)
 Failed 35/36 subtests 
t/Import........................# ############## all imports
ok
t/Maps..........................couldn't connect to display ":121" at /home/src/perl/repoperls/installed-perls/maint-5.10/pecapvd/perl-5.10.0@33628/lib/site_perl/5.10.0/i686-linux-thread-multi-64int/Tk/MainWindow.pm line 55.
MainWindow->new() at t/Maps.t line 36
# Looks like your test died before it could output anything.
 Dubious, test returned 255 (wstat 65280, 0xff00)
 Failed 2/2 subtests 
t/PreviousKnownBugs.............# No tests run!
 Dubious, test returned 255 (wstat 65280, 0xff00)
 Failed 1/2 subtests 
t/Scale_clipped_group...........couldn't connect to display ":121" at /home/src/perl/repoperls/installed-perls/maint-5.10/pecapvd/perl-5.10.0@33628/lib/site_perl/5.10.0/i686-linux-thread-multi-64int/Tk/MainWindow.pm line 55.
MainWindow->new() at t/Scale_clipped_group.t line 35
# Looks like your test died before it could output anything.
 Dubious, test returned 255 (wstat 65280, 0xff00)
 Failed 1/1 subtests 
t/Text..........................# No tests run!
 Dubious, test returned 255 (wstat 65280, 0xff00)
 Failed 4/5 subtests 
t/Text2.........................# No tests run!
 Dubious, test returned 255 (wstat 65280, 0xff00)
 Failed 68/69 subtests 
t/traceutils....................# ############## Tk::Zinc::TraceUtils test
ok
t/Transformations...............# No tests run!
 Dubious, test returned 255 (wstat 65280, 0xff00)
 Failed 20/21 subtests 

Test Summary Report
-------------------
t/AnimatedGradient.t        (Wstat: 65280 Tests: 0 Failed: 0)
  Non-zero exit status: 255
  Parse errors: Bad plan.  You planned 18 tests but ran 0.
t/Bbox-curve-multi-contour.t (Wstat: 65280 Tests: 0 Failed: 0)
  Non-zero exit status: 255
  Parse errors: Bad plan.  You planned 4 tests but ran 0.
t/Bbox.t                    (Wstat: 65280 Tests: 1 Failed: 0)
  Non-zero exit status: 255
  Parse errors: More than one plan found in TAP output
                Bad plan.  You planned 12 tests but ran 1.
t/Coords.t                  (Wstat: 65280 Tests: 1 Failed: 0)
  Non-zero exit status: 255
  Parse errors: More than one plan found in TAP output
                Bad plan.  You planned 26 tests but ran 1.
t/find.t                    (Wstat: 65280 Tests: 1 Failed: 0)
  Non-zero exit status: 255
  Parse errors: More than one plan found in TAP output
                Bad plan.  You planned 22 tests but ran 1.
t/Images.t                  (Wstat: 65280 Tests: 1 Failed: 0)
  Non-zero exit status: 255
  Parse errors: More than one plan found in TAP output
                Bad plan.  You planned 36 tests but ran 1.
t/Maps.t                    (Wstat: 65280 Tests: 0 Failed: 0)
  Non-zero exit status: 255
  Parse errors: Bad plan.  You planned 2 tests but ran 0.
t/PreviousKnownBugs.t       (Wstat: 65280 Tests: 1 Failed: 0)
  Non-zero exit status: 255
  Parse errors: More than one plan found in TAP output
                Bad plan.  You planned 2 tests but ran 1.
t/Scale_clipped_group.t     (Wstat: 65280 Tests: 0 Failed: 0)
  Non-zero exit status: 255
  Parse errors: Bad plan.  You planned 1 tests but ran 0.
t/Text.t                    (Wstat: 65280 Tests: 1 Failed: 0)
  Non-zero exit status: 255
  Parse errors: More than one plan found in TAP output
                Bad plan.  You planned 5 tests but ran 1.
t/Text2.t                   (Wstat: 65280 Tests: 1 Failed: 0)
  Non-zero exit status: 255
  Parse errors: More than one plan found in TAP output
                Bad plan.  You planned 69 tests but ran 1.
t/Transformations.t         (Wstat: 65280 Tests: 1 Failed: 0)
  Non-zero exit status: 255
  Parse errors: More than one plan found in TAP output
                Bad plan.  You planned 21 tests but ran 1.
Files=14, Tests=29, 160 wallclock secs ( 0.06 usr  0.02 sys +  2.80 cusr  0.38 csys =  3.26 CPU)
Result: FAIL
Failed 12/14 test programs. 0/29 subtests failed.
make[3]: *** [test_dynamic] Error 255
make[3]: Leaving directory `/home/sand/.cpan/build/tk-zinc-3.303-bwQmV_'

------------------------------
PREREQUISITES
------------------------------

Prerequisite modules loaded:

requires:

    Module Need Have   
    ------ ---- -------
    Tk     8    804.028

------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------

Environment variables:

    LANG = en_US.utf8
    PATH = /usr/lib/ccache:/home/sand/bin:/usr/local/bin:/usr/bin:/bin:/usr/bin/X11:/usr/games:/usr/local/perl/bin:/usr/X11/bin:/sbin:/usr/sbin
    PERL5LIB = 
    PERL5OPT = 
    PERL5_CPANPLUS_IS_RUNNING = 30169
    PERL5_CPAN_IS_RUNNING = 30169
    SHELL = /usr/bin/zsh
    TERM = screen

Perl special variables (and OS-specific diagnostics, for MSWin32):

    $^X = /home/src/perl/repoperls/installed-perls/maint-5.10/pecapvd/perl-5.10.0@33628/bin/perl
    $UID/$EUID = 1005 / 1005
    $GID = 1005 1005
    $EGID = 1005 1005

Perl module toolchain versions installed:

    Module              Have     
    ------------------- ---------
    CPAN                1.9205   
    Cwd                 3.2701   
    ExtUtils::CBuilder  0.22     
    ExtUtils::Command   1.14     
    ExtUtils::Install   1.50_01  
    ExtUtils::MakeMaker 6.44     
    ExtUtils::Manifest  1.51_01  
    ExtUtils::ParseXS   2.19_01  
    File::Spec          3.2701   
    Module::Build       0.2808_01
    Module::Signature   0.55     
    Test::Harness       3.10     
    Test::More          0.78     
    YAML                0.66     
    YAML::Syck          1.04     
    version             0.74     


--

Summary of my perl5 (revision 5 version 10 subversion 0 patch 33628) configuration:
  Platform:
    osname=linux, osvers=2.6.22-1-k7, archname=i686-linux-thread-multi-64int
    uname='linux k75 2.6.22-1-k7 #1 smp sun jul 29 15:15:55 utc 2007 i686 gnulinux '
    config_args='-Dprefix=/home/src/perl/repoperls/installed-perls/maint-5.10/pecapvd/perl-5.10.0@33628 -Dinstallusrbinperl=n -Uversiononly -Dusedevel -des -Ui_db -Dusethreads -Duse64bitint'
    hint=recommended, useposix=true, d_sigaction=define
    useithreads=define, usemultiplicity=define
    useperlio=define, d_sfio=undef, uselargefiles=define, usesocks=undef
    use64bitint=define, use64bitall=undef, uselongdouble=undef
    usemymalloc=n, bincompat5005=undef
  Compiler:
    cc='cc', ccflags ='-D_REENTRANT -D_GNU_SOURCE -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64',
    optimize='-O2',
    cppflags='-D_REENTRANT -D_GNU_SOURCE -fno-strict-aliasing -pipe -I/usr/local/include'
    ccversion='', gccversion='4.1.2 20061115 (prerelease) (Debian 4.1.1-21)', gccosandvers=''
    intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=12345678
    d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=12
    ivtype='long long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8
    alignbytes=4, prototype=define
  Linker and Libraries:
    ld='cc', ldflags =' -L/usr/local/lib'
    libpth=/usr/local/lib /lib /usr/lib /usr/lib64
    libs=-lnsl -lgdbm -ldb -ldl -lm -lcrypt -lutil -lpthread -lc
    perllibs=-lnsl -ldl -lm -lcrypt -lutil -lpthread -lc
    libc=/lib/libc-2.7.so, so=so, useshrplib=false, libperl=libperl.a
    gnulibc_version='2.7'
  Dynamic Linking:
    dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E'
    cccdlflags='-fPIC', lddlflags='-shared -O2 -L/usr/local/lib'

• FAIL tk-zinc-3.303 i686-linux-thread-multi-64int 2.6.22-1-k7 by andreas.koenig.gmwojprw