Front page | perl.cpan.testers |
Postings from April 2008
FAIL Parallel-Prefork-0.01 i386-netbsd-thread-multi-64int 3.1
Thread Previous
|
Thread Next
From:
chris
Date:
April 4, 2008 05:51
Subject:
FAIL Parallel-Prefork-0.01 i386-netbsd-thread-multi-64int 3.1
This distribution has been tested as part of the cpan-testers
effort to test as many new uploads to CPAN as possible. See
http://testers.cpan.org/
Please cc any replies to cpan-testers@perl.org to keep other
test volunteers informed and to prevent any duplicate effort.
--
Dear KAZUHO,
This is a computer-generated error report created automatically by
CPANPLUS, version 0.80. Testers personal comments may appear
at the end of this report.
Thank you for uploading your work to CPAN. However, it appears that
there were some problems testing your distribution.
TEST RESULTS:
Below is the error stack from stage 'make test':
[MSG] [Fri Apr 4 13:51:10 2008] Trying to get 'http://www.cpan.org/authors/id/K/KA/KAZUHO/CHECKSUMS'
[MSG] [Fri Apr 4 13:51:13 2008] Checksum matches for 'Parallel-Prefork-0.01.tar.gz'
[MSG] [Fri Apr 4 13:51:13 2008] Extracted 'Parallel-Prefork-0.01/'
[MSG] [Fri Apr 4 13:51:13 2008] Extracted 'Parallel-Prefork-0.01/Changes'
[MSG] [Fri Apr 4 13:51:13 2008] Extracted 'Parallel-Prefork-0.01/lib/'
[MSG] [Fri Apr 4 13:51:13 2008] Extracted 'Parallel-Prefork-0.01/lib/Parallel/'
[MSG] [Fri Apr 4 13:51:13 2008] Extracted 'Parallel-Prefork-0.01/lib/Parallel/Prefork.pm'
[MSG] [Fri Apr 4 13:51:13 2008] Extracted 'Parallel-Prefork-0.01/Makefile.PL'
[MSG] [Fri Apr 4 13:51:13 2008] Extracted 'Parallel-Prefork-0.01/MANIFEST'
[MSG] [Fri Apr 4 13:51:13 2008] Extracted 'Parallel-Prefork-0.01/META.yml'
[MSG] [Fri Apr 4 13:51:13 2008] Extracted 'Parallel-Prefork-0.01/README'
[MSG] [Fri Apr 4 13:51:13 2008] Extracted 'Parallel-Prefork-0.01/t/'
[MSG] [Fri Apr 4 13:51:13 2008] Extracted 'Parallel-Prefork-0.01/t/01-base.t'
[MSG] [Fri Apr 4 13:51:13 2008] Extracted 'Parallel-Prefork-0.01/t/02-reconfigure.t'
[MSG] [Fri Apr 4 13:51:13 2008] Extracted 'Parallel::Prefork' to '/home/cpan/perl583/.cpanplus/5.8.3/build/Parallel-Prefork-0.01'
[MSG] [Fri Apr 4 13:51:14 2008] Checking if your kit is complete...
Looks good
Warning: prerequisite Proc::Wait3 0.03 not found.
Writing Makefile for Parallel::Prefork
[MSG] [Fri Apr 4 13:51:14 2008] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value'
[MSG] [Fri Apr 4 13:51:14 2008] Module 'Parallel::Prefork' requires 'Proc::Wait3' version '0.03' to be installed
[MSG] [Fri Apr 4 13:51:14 2008] Trying to get 'http://www.cpan.org/authors/id/C/CT/CTILMES/CHECKSUMS'
[MSG] [Fri Apr 4 13:51:14 2008] Checksum matches for 'Proc-Wait3-0.03.tar.gz'
[MSG] [Fri Apr 4 13:51:15 2008] Extracted 'Proc-Wait3-0.03/'
[MSG] [Fri Apr 4 13:51:15 2008] Extracted 'Proc-Wait3-0.03/Wait3.pm'
[MSG] [Fri Apr 4 13:51:15 2008] Extracted 'Proc-Wait3-0.03/MANIFEST'
[MSG] [Fri Apr 4 13:51:15 2008] Extracted 'Proc-Wait3-0.03/META.yml'
[MSG] [Fri Apr 4 13:51:15 2008] Extracted 'Proc-Wait3-0.03/test.pl'
[MSG] [Fri Apr 4 13:51:15 2008] Extracted 'Proc-Wait3-0.03/Wait3.xs'
[MSG] [Fri Apr 4 13:51:15 2008] Extracted 'Proc-Wait3-0.03/Changes'
[MSG] [Fri Apr 4 13:51:15 2008] Extracted 'Proc-Wait3-0.03/README'
[MSG] [Fri Apr 4 13:51:15 2008] Extracted 'Proc-Wait3-0.03/Makefile.PL'
[MSG] [Fri Apr 4 13:51:15 2008] Extracted 'Proc::Wait3' to '/home/cpan/perl583/.cpanplus/5.8.3/build/Proc-Wait3-0.03'
[MSG] [Fri Apr 4 13:51:15 2008] Checking if your kit is complete...
Looks good
Writing Makefile for Proc::Wait3
[MSG] [Fri Apr 4 13:51:15 2008] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value'
[MSG] [Fri Apr 4 13:51:18 2008] cp Wait3.pm blib/lib/Proc/Wait3.pm
/home/cpan/perl583/bin/perl /home/cpan/perl583/lib/5.8.3/ExtUtils/xsubpp -typemap /home/cpan/perl583/lib/5.8.3/ExtUtils/typemap Wait3.xs > Wait3.xsc && mv Wait3.xsc Wait3.c
cc -c -fno-strict-aliasing -I/usr/pkg/include -O -DVERSION=\"0.03\" -DXS_VERSION=\"0.03\" -DPIC -fPIC "-I/home/cpan/perl583/lib/5.8.3/i386-netbsd-thread-multi-64int/CORE" Wait3.c
Running Mkbootstrap for Proc::Wait3 ()
chmod 644 Wait3.bs
rm -f blib/arch/auto/Proc/Wait3/Wait3.so
cc --whole-archive -shared -L/usr/pkg/lib Wait3.o -o blib/arch/auto/Proc/Wait3/Wait3.so \
\
chmod 755 blib/arch/auto/Proc/Wait3/Wait3.so
cp Wait3.bs blib/arch/auto/Proc/Wait3/Wait3.bs
chmod 644 blib/arch/auto/Proc/Wait3/Wait3.bs
Manifying blib/man3/Proc::Wait3.3
[MSG] [Fri Apr 4 13:51:21 2008] MAKE TEST passed: PERL_DL_NONLAZY=1 /home/cpan/perl583/bin/perl "-Iblib/lib" "-Iblib/arch" test.pl
1..2
# Running under perl version 5.008003 for netbsd
# Current time local: Fri Apr 4 13:51:18 2008
# Current time GMT: Fri Apr 4 12:51:18 2008
# Using Test.pm version 1.25
ok 1
Forked child 17042
PID = [17042], STATUS = [0]
Resources: 0.002556,0.002556,0,0,0,0,167,0,0,0,0,0,0,0,1,0
ok 2
[MSG] [Fri Apr 4 13:51:21 2008] Ok, not sending test report
[MSG] [Fri Apr 4 13:51:23 2008] cp lib/Parallel/Prefork.pm blib/lib/Parallel/Prefork.pm
Manifying blib/man3/Parallel::Prefork.3
[ERROR] [Fri Apr 4 13:51:24 2008] MAKE TEST failed: PERL_DL_NONLAZY=1 /home/cpan/perl583/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
t/01-base...........
# Failed test 'use Parallel::Prefork;'
# at t/01-base.t line 10.
# Tried to use 'Parallel::Prefork'.
# Error: Base class package "Class::Accessor::Fast" is empty.
# (Perhaps you need to 'use' the module which defines that package first.)
# at /home/cpan/perl583/.cpanplus/5.8.3/build/Parallel-Prefork-0.01/blib/lib/Parallel/Prefork.pm line 6
# BEGIN failed--compilation aborted at t/01-base.t line 10.
# Compilation failed in require at (eval 7) line 2.
# BEGIN failed--compilation aborted at (eval 7) line 2.
# Failed test at t/01-base.t line 19.
dubious
Test returned status 255 (wstat 65280, 0xff00)
DIED. FAILED tests 1-4
Failed 4/4 tests, 0.00% okay
t/02-reconfigure....Can't call method "signal_received" on an undefined value at t/01-base.t line 29.
# Looks like you planned 4 tests but only ran 2.
# Looks like you failed 2 tests of 2 run.
# Looks like your test died just after 2.
# Failed test 'use Parallel::Prefork;'
# at t/02-reconfigure.t line 8.
# Tried to use 'Parallel::Prefork'.
# Error: Base class package "Class::Accessor::Fast" is empty.
# (Perhaps you need to 'use' the module which defines that package first.)
# at /home/cpan/perl583/.cpanplus/5.8.3/build/Parallel-Prefork-0.01/blib/lib/Parallel/Prefork.pm line 6
# BEGIN failed--compilation aborted at t/02-reconfigure.t line 8.
# Compilation failed in require at (eval 3) line 2.
# BEGIN failed--compilation aborted at (eval 3) line 2.
# Failed test at t/02-reconfigure.t line 20.
Can't call method "signal_received" on an undefined value at t/02-reconfigure.t line 24.
# Looks like you planned 3 tests but only ran 2.
# Looks like you failed 2 tests of 2 run.
# Looks like your test died just after 2.
dubious
Test returned status 255 (wstat 65280, 0xff00)
DIED. FAILED tests 1-3
Failed 3/3 tests, 0.00% okay
Failed Test Stat Wstat Total Fail List of Failed
-------------------------------------------------------------------------------
t/01-base.t 255 65280 4 6 1-4
t/02-reconfigure.t 255 65280 3 4 1-3
Failed 2/2 test scripts. 7/7 subtests failed.
Files=2, Tests=7, 1 wallclock secs ( 0.38 cusr + 0.04 csys = 0.42 CPU)
[MSG] [Fri Apr 4 13:51:24 2008] DEFAULT 'proceed_on_test_failure' HANDLER RETURNING 'sub return value'
PREREQUISITES:
Here is a list of prerequisites you specified and versions we
managed to load:
Module Name Have Want
Proc::Wait3 0.03 0.03
******************************** NOTE ********************************
The comments above are created mechanically, possibly without manual
checking by the sender. As there are many people performing automatic
tests on each upload to CPAN, it is likely that you will receive
identical messages about the same problem.
If you believe that the message is mistaken, please reply to the first
one with correction and/or additional informations, and do not take
it personally. We appreciate your patience. :)
**********************************************************************
Additional comments:
This report was machine-generated by CPAN::YACSmoke 0.0307.
------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------
Environment variables:
AUTOMATED_TESTING = 1
PATH = /home/cpan/bin:/bin:/sbin:/usr/bin:/usr/sbin:/usr/X11R6/bin:/usr/pkg/bin:/usr/pkg/sbin:/usr/games:/usr/local/bin:/usr/local/sbin
PERL5LIB = :/home/cpan/perl583/.cpanplus/5.8.3/build/Proc-Wait3-0.03/blib/lib:/home/cpan/perl583/.cpanplus/5.8.3/build/Proc-Wait3-0.03/blib/arch:/home/cpan/perl583/.cpanplus/5.8.3/build/Proc-Wait3-0.03/blib:/home/cpan/perl583/.cpanplus/5.8.3/build/Proc-Wait3-0.03/blib/lib:/home/cpan/perl583/.cpanplus/5.8.3/build/Proc-Wait3-0.03/blib/arch:/home/cpan/perl583/.cpanplus/5.8.3/build/Proc-Wait3-0.03/blib:/home/cpan/perl583/.cpanplus/5.8.3/build/Parallel-Prefork-0.01/blib/lib:/home/cpan/perl583/.cpanplus/5.8.3/build/Parallel-Prefork-0.01/blib/arch:/home/cpan/perl583/.cpanplus/5.8.3/build/Parallel-Prefork-0.01/blib
PERL5_CPANPLUS_IS_RUNNING = 14499
PERL5_CPANPLUS_IS_VERSION = 0.80
PERL_MM_USE_DEFAULT = 1
SHELL = /usr/pkg/bin/bash
TERM = screen
Perl special variables (and OS-specific diagnostics, for MSWin32):
Perl: $^X = /home/cpan/perl583/bin/perl
UID: $< = 1002
EUID: $> = 1002
GID: $( = 100 100
EGID: $) = 100 100
-------------------------------
--
Summary of my perl5 (revision 5.0 version 8 subversion 3) configuration:
Platform:
osname=netbsd, osvers=3.1, archname=i386-netbsd-thread-multi-64int
uname='netbsd canker.bingosnet.co.uk 3.1 netbsd 3.1 (generic_laptop) #0: tue oct 31 04:32:05 utc 2006 builds@b0.netbsd.org:homebuildsabnetbsd-3-1-releasei386200610302053z-objhomebuildsabnetbsd-3-1-releasesrcsysarchi386compilegeneric_laptop i386 '
config_args=''
hint=recommended, useposix=true, d_sigaction=define
usethreads=define use5005threads=undef useithreads=define usemultiplicity=define
useperlio=define d_sfio=undef uselargefiles=define usesocks=undef
use64bitint=define use64bitall=undef uselongdouble=undef
usemymalloc=n, bincompat5005=undef
Compiler:
cc='cc', ccflags ='-fno-strict-aliasing -I/usr/pkg/include',
optimize='-O',
cppflags='-fno-strict-aliasing -I/usr/pkg/include'
ccversion='', gccversion='3.3.3 (NetBSD nb3 20040520)', gccosandvers=''
intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=12345678
d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=12
ivtype='long long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8
alignbytes=4, prototype=define
Linker and Libraries:
ld='cc', ldflags =' -Wl,-rpath,/usr/pkg/lib -Wl,-rpath,/usr/local/lib -L/usr/pkg/lib'
libpth=/usr/pkg/lib /lib /usr/lib
libs=-lgdbm -lm -lcrypt -lutil -lc -lposix -lpthread
perllibs=-lm -lcrypt -lutil -lc -lposix -lpthread
libc=/lib/libc.so, so=so, useshrplib=false, libperl=libperl.a
gnulibc_version=''
Dynamic Linking:
dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E '
cccdlflags='-DPIC -fPIC ', lddlflags='--whole-archive -shared -L/usr/pkg/lib'
Thread Previous
|
Thread Next