develooper Front page | perl.cpan.testers | Postings from April 2008

FAIL Parallel-Prefork-0.01 i386-freebsd-64int 7.0-release

From:
chris
Date:
April 9, 2008 20:35
Subject:
FAIL Parallel-Prefork-0.01 i386-freebsd-64int 7.0-release
This distribution has been tested as part of the cpan-testers
effort to test as many new uploads to CPAN as possible.  See
http://testers.cpan.org/

Please cc any replies to cpan-testers@perl.org to keep other
test volunteers informed and to prevent any duplicate effort.

--

Dear KAZUHO,
    
This is a computer-generated error report created automatically by
CPANPLUS, version 0.84. Testers personal comments may appear 
at the end of this report.


Thank you for uploading your work to CPAN.  However, it appears that
there were some problems testing your distribution.

TEST RESULTS:

Below is the error stack from stage 'make test':

[MSG] [Thu Apr 10 02:31:57 2008] Trying to get 'http://www.cpan.org/authors/id/K/KA/KAZUHO/Parallel-Prefork-0.01.tar.gz'
[MSG] [Thu Apr 10 02:31:58 2008] Trying to get 'http://www.cpan.org/authors/id/K/KA/KAZUHO/CHECKSUMS'
[MSG] [Thu Apr 10 02:31:59 2008] Checksum matches for 'Parallel-Prefork-0.01.tar.gz'
[MSG] [Thu Apr 10 02:31:59 2008] Extracted 'Parallel-Prefork-0.01/'
[MSG] [Thu Apr 10 02:31:59 2008] Extracted 'Parallel-Prefork-0.01/Changes'
[MSG] [Thu Apr 10 02:31:59 2008] Extracted 'Parallel-Prefork-0.01/lib/'
[MSG] [Thu Apr 10 02:31:59 2008] Extracted 'Parallel-Prefork-0.01/lib/Parallel/'
[MSG] [Thu Apr 10 02:31:59 2008] Extracted 'Parallel-Prefork-0.01/lib/Parallel/Prefork.pm'
[MSG] [Thu Apr 10 02:31:59 2008] Extracted 'Parallel-Prefork-0.01/Makefile.PL'
[MSG] [Thu Apr 10 02:31:59 2008] Extracted 'Parallel-Prefork-0.01/MANIFEST'
[MSG] [Thu Apr 10 02:31:59 2008] Extracted 'Parallel-Prefork-0.01/META.yml'
[MSG] [Thu Apr 10 02:31:59 2008] Extracted 'Parallel-Prefork-0.01/README'
[MSG] [Thu Apr 10 02:31:59 2008] Extracted 'Parallel-Prefork-0.01/t/'
[MSG] [Thu Apr 10 02:31:59 2008] Extracted 'Parallel-Prefork-0.01/t/01-base.t'
[MSG] [Thu Apr 10 02:31:59 2008] Extracted 'Parallel-Prefork-0.01/t/02-reconfigure.t'
[MSG] [Thu Apr 10 02:31:59 2008] Extracted 'Parallel::Prefork' to '/usr/home/cpan/perl5.10.0/.cpanplus/5.10.0/build/Parallel-Prefork-0.01'
[MSG] [Thu Apr 10 02:32:00 2008] Checking if your kit is complete...
Looks good
Writing Makefile for Parallel::Prefork
Warning: prerequisite Proc::Wait3 0.03 not found.

[MSG] [Thu Apr 10 02:32:00 2008] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value'
[MSG] [Thu Apr 10 02:32:00 2008] Module 'Parallel::Prefork' requires 'Proc::Wait3' version '0.03' to be installed 
[MSG] [Thu Apr 10 02:32:00 2008] Trying to get 'http://www.cpan.org/authors/id/C/CT/CTILMES/Proc-Wait3-0.03.tar.gz'
[MSG] [Thu Apr 10 02:32:01 2008] Trying to get 'http://www.cpan.org/authors/id/C/CT/CTILMES/CHECKSUMS'
[MSG] [Thu Apr 10 02:32:01 2008] Checksum matches for 'Proc-Wait3-0.03.tar.gz'
[MSG] [Thu Apr 10 02:32:01 2008] Extracted 'Proc-Wait3-0.03/'
[MSG] [Thu Apr 10 02:32:01 2008] Extracted 'Proc-Wait3-0.03/Wait3.pm'
[MSG] [Thu Apr 10 02:32:01 2008] Extracted 'Proc-Wait3-0.03/MANIFEST'
[MSG] [Thu Apr 10 02:32:01 2008] Extracted 'Proc-Wait3-0.03/META.yml'
[MSG] [Thu Apr 10 02:32:01 2008] Extracted 'Proc-Wait3-0.03/test.pl'
[MSG] [Thu Apr 10 02:32:01 2008] Extracted 'Proc-Wait3-0.03/Wait3.xs'
[MSG] [Thu Apr 10 02:32:01 2008] Extracted 'Proc-Wait3-0.03/Changes'
[MSG] [Thu Apr 10 02:32:01 2008] Extracted 'Proc-Wait3-0.03/README'
[MSG] [Thu Apr 10 02:32:01 2008] Extracted 'Proc-Wait3-0.03/Makefile.PL'
[MSG] [Thu Apr 10 02:32:01 2008] Extracted 'Proc::Wait3' to '/usr/home/cpan/perl5.10.0/.cpanplus/5.10.0/build/Proc-Wait3-0.03'
[MSG] [Thu Apr 10 02:32:02 2008] Checking if your kit is complete...
Looks good
Writing Makefile for Proc::Wait3

[MSG] [Thu Apr 10 02:32:02 2008] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value'
[MSG] [Thu Apr 10 02:32:06 2008] cp Wait3.pm blib/lib/Proc/Wait3.pm
/usr/home/cpan/perl5.10.0/bin/perl /usr/home/cpan/perl5.10.0/lib/5.10.0/ExtUtils/xsubpp  -typemap /usr/home/cpan/perl5.10.0/lib/5.10.0/ExtUtils/typemap  Wait3.xs > Wait3.xsc && mv Wait3.xsc Wait3.c
cc -c    -DHAS_FPSETMASK -DHAS_FLOATINGPOINT_H -fno-strict-aliasing -pipe -I/usr/local/include -O    -DVERSION=\"0.03\"  -DXS_VERSION=\"0.03\" -DPIC -fPIC "-I/usr/home/cpan/perl5.10.0/lib/5.10.0/i386-freebsd-64int/CORE"   Wait3.c
Running Mkbootstrap for Proc::Wait3 ()
chmod 644 Wait3.bs
rm -f blib/arch/auto/Proc/Wait3/Wait3.so
cc  -shared  -L/usr/local/lib Wait3.o  -o blib/arch/auto/Proc/Wait3/Wait3.so 	    	 
chmod 755 blib/arch/auto/Proc/Wait3/Wait3.so
cp Wait3.bs blib/arch/auto/Proc/Wait3/Wait3.bs
chmod 644 blib/arch/auto/Proc/Wait3/Wait3.bs
Manifying blib/man3/Proc::Wait3.3

[MSG] [Thu Apr 10 02:32:10 2008] MAKE TEST passed: PERL_DL_NONLAZY=1 /usr/home/cpan/perl5.10.0/bin/perl "-Iblib/lib" "-Iblib/arch" test.pl
1..2
# Running under perl version 5.010000 for freebsd
# Current time local: Thu Apr 10 02:32:06 2008
# Current time GMT:   Thu Apr 10 01:32:06 2008
# Using Test.pm version 1.25
ok 1
Forked child 60027
PID = [60027], STATUS = [0]
Resources: 0,0.010404,2612,1032,728,128,94,0,0,0,0,0,0,0,2,2
ok 2

[MSG] [Thu Apr 10 02:32:10 2008] Sending test report for 'Proc-Wait3-0.03'
[MSG] [Thu Apr 10 02:32:10 2008] Successfully sent 'pass' report for 'Proc-Wait3-0.03'
[MSG] [Thu Apr 10 02:32:13 2008] cp lib/Parallel/Prefork.pm blib/lib/Parallel/Prefork.pm
Manifying blib/man3/Parallel::Prefork.3

[ERROR] [Thu Apr 10 02:32:14 2008] MAKE TEST failed: Illegal seek PERL_DL_NONLAZY=1 /usr/home/cpan/perl5.10.0/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
t/01-base............. Dubious, test returned 255 (wstat 65280, 0xff00)
 Failed 4/4 subtests 
t/02-reconfigure...... Dubious, test returned 255 (wstat 65280, 0xff00)
 Failed 3/3 subtests 

Test Summary Report
-------------------
t/01-base.t       (Wstat: 65280 Tests: 2 Failed: 2)
  Failed tests:  1-2
  Non-zero exit status: 255
  Parse errors: Bad plan.  You planned 4 tests but ran 2.
t/02-reconfigure.t (Wstat: 65280 Tests: 2 Failed: 2)
  Failed tests:  1-2
  Non-zero exit status: 255
  Parse errors: Bad plan.  You planned 3 tests but ran 2.
Files=2, Tests=4,  0 wallclock secs ( 0.01 usr  0.09 sys +  0.07 cusr  0.34 csys =  0.52 CPU)
Result: FAIL
*** Error code 255

Stop in /usr/home/cpan/perl5.10.0/.cpanplus/5.10.0/build/Parallel-Prefork-0.01.

#   Failed test 'use Parallel::Prefork;'
#   at t/01-base.t line 10.
#     Tried to use 'Parallel::Prefork'.
#     Error:  Base class package "Class::Accessor::Fast" is empty.
#     (Perhaps you need to 'use' the module which defines that package first,
#     or make that module available in @INC (@INC contains: /usr/home/cpan/perl5.10.0/.cpanplus/5.10.0/build/Parallel-Prefork-0.01/blib/lib /usr/home/cpan/perl5.10.0/.cpanplus/5.10.0/build/Parallel-Prefork-0.01/blib/arch /usr/home/cpan/perl5.10.0/.cpanplus/5.10.0/build/Proc-Wait3-0.03/blib/lib /usr/home/cpan/perl5.10.0/.cpanplus/5.10.0/build/Proc-Wait3-0.03/blib/arch /usr/home/cpan/perl5.10.0/.cpanplus/5.10.0/build/Proc-Wait3-0.03/blib /usr/home/cpan/perl5.10.0/.cpanplus/5.10.0/build/Proc-Wait3-0.03/blib/lib /usr/home/cpan/perl5.10.0/.cpanplus/5.10.0/build/Proc-Wait3-0.03/blib/arch /usr/home/cpan/perl5.10.0/.cpanplus/5.10.0/build/Proc-Wait3-0.03/blib /usr/home/cpan/perl5.10.0/.cpanplus/5.10.0/build/Parallel-Prefork-0.01/blib/lib /usr/home/cpan/perl5.10.0/.cpanplus/5.10.0/build/Parallel-Prefork-0.01/blib/arch /usr/home/cpan/perl5.10.0/.cpanplus/5.10.0/build/Parallel-Prefork-0.01/blib /usr/home/cpan/perl5.10.0/lib/5.10.0/i386-freebsd-64int /usr/home/cpan/perl5.10.0/lib/5.10.0 /usr/home/cpan/perl5.10.0/lib/site_perl/5.10.0/i386-freebsd-64int /usr/home/cpan/perl5.10.0/lib/site_perl/5.10.0 .).
#  at /usr/home/cpan/perl5.10.0/.cpanplus/5.10.0/build/Parallel-Prefork-0.01/blib/lib/Parallel/Prefork.pm line 6
# BEGIN failed--compilation aborted at t/01-base.t line 10.
# Compilation failed in require at (eval 8) line 2.
# BEGIN failed--compilation aborted at (eval 8) line 2.

#   Failed test at t/01-base.t line 19.
Can't call method "signal_received" on an undefined value at t/01-base.t line 29.
# Looks like you planned 4 tests but only ran 2.
# Looks like you failed 2 tests of 2 run.
# Looks like your test died just after 2.

#   Failed test 'use Parallel::Prefork;'
#   at t/02-reconfigure.t line 8.
#     Tried to use 'Parallel::Prefork'.
#     Error:  Base class package "Class::Accessor::Fast" is empty.
#     (Perhaps you need to 'use' the module which defines that package first,
#     or make that module available in @INC (@INC contains: /usr/home/cpan/perl5.10.0/.cpanplus/5.10.0/build/Parallel-Prefork-0.01/blib/lib /usr/home/cpan/perl5.10.0/.cpanplus/5.10.0/build/Parallel-Prefork-0.01/blib/arch /usr/home/cpan/perl5.10.0/.cpanplus/5.10.0/build/Proc-Wait3-0.03/blib/lib /usr/home/cpan/perl5.10.0/.cpanplus/5.10.0/build/Proc-Wait3-0.03/blib/arch /usr/home/cpan/perl5.10.0/.cpanplus/5.10.0/build/Proc-Wait3-0.03/blib /usr/home/cpan/perl5.10.0/.cpanplus/5.10.0/build/Proc-Wait3-0.03/blib/lib /usr/home/cpan/perl5.10.0/.cpanplus/5.10.0/build/Proc-Wait3-0.03/blib/arch /usr/home/cpan/perl5.10.0/.cpanplus/5.10.0/build/Proc-Wait3-0.03/blib /usr/home/cpan/perl5.10.0/.cpanplus/5.10.0/build/Parallel-Prefork-0.01/blib/lib /usr/home/cpan/perl5.10.0/.cpanplus/5.10.0/build/Parallel-Prefork-0.01/blib/arch /usr/home/cpan/perl5.10.0/.cpanplus/5.10.0/build/Parallel-Prefork-0.01/blib /usr/home/cpan/perl5.10.0/lib/5.10.0/i386-freebsd-64int /usr/home/cpan/perl5.10.0/lib/5.10.0 /usr/home/cpan/perl5.10.0/lib/site_perl/5.10.0/i386-freebsd-64int /usr/home/cpan/perl5.10.0/lib/site_perl/5.10.0 .).
#  at /usr/home/cpan/perl5.10.0/.cpanplus/5.10.0/build/Parallel-Prefork-0.01/blib/lib/Parallel/Prefork.pm line 6
# BEGIN failed--compilation aborted at t/02-reconfigure.t line 8.
# Compilation failed in require at (eval 3) line 2.
# BEGIN failed--compilation aborted at (eval 3) line 2.

#   Failed test at t/02-reconfigure.t line 20.
Can't call method "signal_received" on an undefined value at t/02-reconfigure.t line 24.
# Looks like you planned 3 tests but only ran 2.
# Looks like you failed 2 tests of 2 run.
# Looks like your test died just after 2.
Failed 2/2 test programs. 4/4 subtests failed.

[MSG] [Thu Apr 10 02:32:15 2008] DEFAULT 'proceed_on_test_failure' HANDLER RETURNING 'sub return value'

PREREQUISITES:

Here is a list of prerequisites you specified and versions we 
managed to load:
                                
	  Module Name                        Have     Want
	  Proc::Wait3                        0.03     0.03

******************************** NOTE ********************************
The comments above are created mechanically, possibly without manual
checking by the sender.  As there are many people performing automatic
tests on each upload to CPAN, it is likely that you will receive 
identical messages about the same problem.

If you believe that the message is mistaken, please reply to the first
one with correction and/or additional informations, and do not take
it personally.  We appreciate your patience. :)
**********************************************************************

Additional comments:
 

This report was machine-generated by CPAN::YACSmoke 0.0307. Powered by POE::Component::CPAN::YACSmoke.

------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------

Environment variables:

    AUTOMATED_TESTING = 1
    PATH = /sbin:/bin:/usr/sbin:/usr/bin:/usr/games:/usr/local/sbin:/usr/local/bin:/home/cpan/bin
    PERL5LIB = :/usr/home/cpan/perl5.10.0/.cpanplus/5.10.0/build/Proc-Wait3-0.03/blib/lib:/usr/home/cpan/perl5.10.0/.cpanplus/5.10.0/build/Proc-Wait3-0.03/blib/arch:/usr/home/cpan/perl5.10.0/.cpanplus/5.10.0/build/Proc-Wait3-0.03/blib:/usr/home/cpan/perl5.10.0/.cpanplus/5.10.0/build/Proc-Wait3-0.03/blib/lib:/usr/home/cpan/perl5.10.0/.cpanplus/5.10.0/build/Proc-Wait3-0.03/blib/arch:/usr/home/cpan/perl5.10.0/.cpanplus/5.10.0/build/Proc-Wait3-0.03/blib:/usr/home/cpan/perl5.10.0/.cpanplus/5.10.0/build/Parallel-Prefork-0.01/blib/lib:/usr/home/cpan/perl5.10.0/.cpanplus/5.10.0/build/Parallel-Prefork-0.01/blib/arch:/usr/home/cpan/perl5.10.0/.cpanplus/5.10.0/build/Parallel-Prefork-0.01/blib
    PERL5_CPANPLUS_IS_RUNNING = 59931
    PERL5_CPANPLUS_IS_VERSION = 0.84
    PERL_MM_USE_DEFAULT = 1
    SHELL = /usr/local/bin/bash
    TERM = screen

Perl special variables (and OS-specific diagnostics, for MSWin32):

    Perl: $^X = /usr/home/cpan/perl5.10.0/bin/perl
    UID:  $<  = 1002
    EUID: $>  = 1002
    GID:  $(  = 1001 1001 1001
    EGID: $)  = 1001 1001 1001


-------------------------------


--

Summary of my perl5 (revision 5 version 10 subversion 0) configuration:
  Platform:
    osname=freebsd, osvers=7.0-release, archname=i386-freebsd-64int
    uname='freebsd waterloo.bingosnet.co.uk 7.0-release freebsd 7.0-release #0: sun feb 24 19:59:52 utc 2008 root@logan.cse.buffalo.edu:usrobjusrsrcsysgeneric i386 '
    config_args='-e -Dprefix=/usr/home/cpan/perl5.10.0 -Duse64bitint -Dusemymalloc=n -d'
    hint=recommended, useposix=true, d_sigaction=define
    useithreads=undef, usemultiplicity=undef
    useperlio=define, d_sfio=undef, uselargefiles=define, usesocks=undef
    use64bitint=define, use64bitall=undef, uselongdouble=undef
    usemymalloc=n, bincompat5005=undef
  Compiler:
    cc='cc', ccflags ='-DHAS_FPSETMASK -DHAS_FLOATINGPOINT_H -fno-strict-aliasing -pipe -I/usr/local/include',
    optimize='-O',
    cppflags='-DHAS_FPSETMASK -DHAS_FLOATINGPOINT_H -fno-strict-aliasing -pipe -I/usr/local/include'
    ccversion='', gccversion='4.2.1 20070719  [FreeBSD]', gccosandvers=''
    intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=12345678
    d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=12
    ivtype='long long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8
    alignbytes=4, prototype=define
  Linker and Libraries:
    ld='cc', ldflags ='-Wl,-E  -L/usr/local/lib'
    libpth=/usr/lib /usr/local/lib
    libs=-lm -lcrypt -lutil -lc
    perllibs=-lm -lcrypt -lutil -lc
    libc=, so=so, useshrplib=false, libperl=libperl.a
    gnulibc_version=''
  Dynamic Linking:
    dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags=' '
    cccdlflags='-DPIC -fPIC', lddlflags='-shared  -L/usr/local/lib'

Comments to Ask Bjørn Hansen at ask@perl.org | Group listing | About