Front page | perl.cpan.testers |
Postings from April 2008
FAIL ICanHasCheezburger-lolcats-0.01 x86_64-linux-thread-multi-ld 2.6.22.10
Thread Previous
From:
imacat
Date:
April 24, 2008 01:32
Subject:
FAIL ICanHasCheezburger-lolcats-0.01 x86_64-linux-thread-multi-ld 2.6.22.10
This distribution has been tested as part of the cpan-testers
effort to test as many new uploads to CPAN as possible. See
http://testers.cpan.org/
Please cc any replies to cpan-testers@perl.org to keep other
test volunteers informed and to prevent any duplicate effort.
--
Dear CMANTITO,
This is a computer-generated error report created automatically by
CPANPLUS, version 0.84. Testers personal comments may appear
at the end of this report.
Thank you for uploading your work to CPAN. However, it appears that
there were some problems testing your distribution.
TEST RESULTS:
Below is the error stack from stage 'make test':
[MSG] [Thu Apr 24 16:31:36 2008] Trying to get 'http://www.cpan.org/authors/id/C/CM/CMANTITO/CHECKSUMS'
[MSG] [Thu Apr 24 16:31:37 2008] Checksum matches for 'ICanHasCheezburger-lolcats-0.01.tar.gz'
[MSG] [Thu Apr 24 16:31:37 2008] Extracted 'ICanHasCheezburger-lolcats-0.01/'
[MSG] [Thu Apr 24 16:31:37 2008] Extracted 'ICanHasCheezburger-lolcats-0.01/lib/'
[MSG] [Thu Apr 24 16:31:37 2008] Extracted 'ICanHasCheezburger-lolcats-0.01/lib/ICanHasCheezburger/'
[MSG] [Thu Apr 24 16:31:37 2008] Extracted 'ICanHasCheezburger-lolcats-0.01/lib/ICanHasCheezburger/lolcats.pm'
[MSG] [Thu Apr 24 16:31:37 2008] Extracted 'ICanHasCheezburger-lolcats-0.01/Makefile.PL'
[MSG] [Thu Apr 24 16:31:37 2008] Extracted 'ICanHasCheezburger-lolcats-0.01/README'
[MSG] [Thu Apr 24 16:31:37 2008] Extracted 'ICanHasCheezburger-lolcats-0.01/t/'
[MSG] [Thu Apr 24 16:31:37 2008] Extracted 'ICanHasCheezburger-lolcats-0.01/t/ICanHasCheezburger-lolcats.t'
[MSG] [Thu Apr 24 16:31:37 2008] Extracted 'ICanHasCheezburger-lolcats-0.01/AUTHORS'
[MSG] [Thu Apr 24 16:31:37 2008] Extracted 'ICanHasCheezburger-lolcats-0.01/MANIFEST'
[MSG] [Thu Apr 24 16:31:37 2008] Extracted 'ICanHasCheezburger::lolcats' to '/opt/perl/testers/5.8.8/.cpanplus/5.8.8/build/ICanHasCheezburger-lolcats-0.01'
[MSG] [Thu Apr 24 16:31:37 2008] Checking if your kit is complete...
Looks good
Writing Makefile for ICanHasCheezburger::lolcats
[MSG] [Thu Apr 24 16:31:37 2008] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value'
[MSG] [Thu Apr 24 16:31:38 2008] cp lib/ICanHasCheezburger/lolcats.pm blib/lib/ICanHasCheezburger/lolcats.pm
Manifying blib/man3/ICanHasCheezburger::lolcats.3
[ERROR] [Thu Apr 24 16:31:50 2008] MAKE TEST failed: ¤£§Æ±æªº¸Ë¸m¿é¥X¤J±±¨î (ioctl) t/ICanHasCheezburger-lolcats......
# Failed test 'use ICanHasCheezburger::lolcats;'
# at t/ICanHasCheezburger-lolcats.t line 9.
# Tried to use 'ICanHasCheezburger::lolcats'.
# Error: Can't locate XML/Simple.pm in @INC (@INC contains: /opt/perl/testers/5.8.8/.cpanplus/5.8.8/build/ICanHasCheezburger-lolcats-0.01/blib/lib /opt/perl/testers/5.8.8/.cpanplus/5.8.8/build/ICanHasCheezburger-lolcats-0.01/blib/arch /home/imacat/lib/perl5 /opt/perl/testers/5.8.8/.cpanplus/5.8.8/build/ICanHasCheezburger-lolcats-0.01/blib/lib /opt/perl/testers/5.8.8/.cpanplus/5.8.8/build/ICanHasCheezburger-lolcats-0.01/blib/arch /opt/perl/testers/5.8.8/.cpanplus/5.8.8/build/ICanHasCheezburger-lolcats-0.01/blib /opt/perl/testers/5.8.8/lib/5.8.8/x86_64-linux-thread-multi-ld /opt/perl/testers/5.8.8/lib/5.8.8 /opt/perl/testers/5.8.8/lib/site_perl/5.8.8/x86_64-linux-thread-multi-ld /opt/perl/testers/5.8.8/lib/site_perl/5.8.8 /opt/perl/testers/5.8.8/lib/site_perl .) at /opt/perl/testers/5.8.8/.cpanplus/5.8.8/build/ICanHasCheezburger-lolcats-0.01/blib/lib/ICanHasCheezburger/lolcats.pm line 4.
# Compilation failed in require at (eval 2) line 2.
# BEGIN failed--compilation aborted at (eval 2) line 2.
# Looks like you failed 1 test of 7.
Dubious, test returned 1 (wstat 256, 0x100)
Failed 1/7 subtests
Test Summary Report
-------------------
t/ICanHasCheezburger-lolcats.t (Wstat: 256 Tests: 7 Failed: 1)
Failed test: 1
Non-zero exit status: 1
Files=1, Tests=7, 11 wallclock secs ( 0.00 usr 0.01 sys + 0.22 cusr 0.02 csys = 0.25 CPU)
Result: FAIL
Failed 1/1 test programs. 1/7 subtests failed.
make: *** [test_dynamic] Error 1
[MSG] [Thu Apr 24 16:31:50 2008] DEFAULT 'proceed_on_test_failure' HANDLER RETURNING 'sub return value'
MISSING PREREQUISITES:
It was observed that the test suite seem to fail without these modules:
XML::Simple
As such, adding the prerequisite module(s) to 'PREREQ_PM' in your
Makefile.PL should solve this problem. For example:
WriteMakefile(
AUTHOR => 'CMANTITO (cpanplus-info@lists.sf.net)',
... # other information
PREREQ_PM => {
'XML::Simple' => '0', # or a minimum working version
}
);
If you are interested in making a more flexible Makefile.PL that can
probe for missing dependencies and install them, ExtUtils::AutoInstall
at <http://search.cpan.org/dist/ExtUtils-AutoInstall/> may be
worth a look.
Thanks! :-)
******************************** NOTE ********************************
The comments above are created mechanically, possibly without manual
checking by the sender. As there are many people performing automatic
tests on each upload to CPAN, it is likely that you will receive
identical messages about the same problem.
If you believe that the message is mistaken, please reply to the first
one with correction and/or additional informations, and do not take
it personally. We appreciate your patience. :)
**********************************************************************
Additional comments:
This report was machine-generated by CPAN::YACSmoke 0.0307.
--
Summary of my perl5 (revision 5 version 8 subversion 8) configuration:
Platform:
osname=linux, osvers=2.6.22.10, archname=x86_64-linux-thread-multi-ld
uname='linux rinse 2.6.22.10 #1 smp tue nov 20 02:36:22 cst 2007 x86_64 gnulinux '
config_args='-d -Dprefix=/opt/perl/testers/5.8.8 -Dusethreads -Dcc=gcc -Duselongdouble -Doptimize=-g -O3 -Dd_dosuid -Dinc_version_list=none -Acccdlflags=-fPIC -Duseshrplib=true -Dcf_email=imacat@mail.imacat.idv.tw'
hint=recommended, useposix=true, d_sigaction=define
usethreads=define use5005threads=undef useithreads=define usemultiplicity=define
useperlio=define d_sfio=undef uselargefiles=define usesocks=undef
use64bitint=define use64bitall=define uselongdouble=define
usemymalloc=n, bincompat5005=undef
Compiler:
cc='gcc', ccflags ='-D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS -DDEBUGGING -fno-strict-aliasing -pipe -Wdeclaration-after-statement -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64',
optimize='-g -O3',
cppflags='-D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS -DDEBUGGING -fno-strict-aliasing -pipe -Wdeclaration-after-statement -I/usr/local/include'
ccversion='', gccversion='4.1.2 20061115 (prerelease) (Debian 4.1.1-21)', gccosandvers=''
intsize=4, longsize=8, ptrsize=8, doublesize=8, byteorder=12345678
d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=16
ivtype='long', ivsize=8, nvtype='long double', nvsize=16, Off_t='off_t', lseeksize=8
alignbytes=16, prototype=define
Linker and Libraries:
ld='gcc', ldflags =' -L/usr/local/lib'
libpth=/usr/local/lib /lib /usr/lib
libs=-lnsl -lgdbm -ldb -ldl -lm -lcrypt -lutil -lpthread -lc
perllibs=-lnsl -ldl -lm -lcrypt -lutil -lpthread -lc
libc=/lib/libc-2.3.6.so, so=so, useshrplib=true, libperl=libperl.so
gnulibc_version='2.3.6'
Dynamic Linking:
dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E -Wl,-rpath,/opt/perl/testers/5.8.8/lib/5.8.8/x86_64-linux-thread-multi-ld/CORE'
cccdlflags=' -fPIC', lddlflags='-shared -L/usr/local/lib'
Thread Previous