FAIL Kephra-0.3.9.10 i686-linux-thread-multi 2.6.22-1-k7

This distribution has been tested as part of the cpan-testers
effort to test as many new uploads to CPAN as possible.  See
http://testers.cpan.org/


--
Dear Herbert Breunung,
    
This is a computer-generated report for Kephra-0.3.9.10
on perl 5.11.0 patch 33919, created by CPAN-Reporter-1.15. 

Thank you for uploading your work to CPAN.  However, there was a problem
testing your distribution.

If you think this report is invalid, please consult the CPAN Testers Wiki
for suggestions on how to avoid getting FAIL reports for missing library
or binary dependencies, unsupported operating systems, and so on:

http://cpantest.grango.org/wiki/CPANAuthorNotes

Sections of this report:

    * Tester comments
    * Program output
    * Prerequisites
    * Environment and other context

------------------------------
TESTER COMMENTS
------------------------------

Additional comments from tester: 

none provided

------------------------------
PROGRAM OUTPUT
------------------------------

Output from '/usr/bin/make test':

make[3]: Entering directory `/home/sand/.cpan/build/Kephra-0.3.9.10-rSHBUn'
PERL_DL_NONLAZY=1 /home/src/perl/repoperls/installed-perls/perl/p49Uzgg/perl-5.10.0@33919/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'inc', 'blib/lib', 'blib/arch')" t/*.t
t/01_compile......ok
t/02_config.......ok
t/10_new..........Error while autoloading 'Wx::WXK_PAGEUP' at /home/sand/.cpan/build/Kephra-0.3.9.10-rSHBUn/blib/lib/Kephra/API/CommandList.pm line 121
# Looks like your test died before it could output anything.
 Dubious, test returned 255 (wstat 65280, 0xff00)
 Failed 1/1 subtests 

Test Summary Report
-------------------
t/10_new.t    (Wstat: 65280 Tests: 0 Failed: 0)
  Non-zero exit status: 255
  Parse errors: Bad plan.  You planned 1 tests but ran 0.
Files=3, Tests=87,  5 wallclock secs ( 0.04 usr  0.02 sys +  2.59 cusr  0.16 csys =  2.81 CPU)
Result: FAIL
Failed 1/3 test programs. 0/87 subtests failed.
make[3]: *** [test_dynamic] Error 255
make[3]: Leaving directory `/home/sand/.cpan/build/Kephra-0.3.9.10-rSHBUn'

------------------------------
PREREQUISITES
------------------------------

Prerequisite modules loaded:

requires:

    Module                Need Have     
    --------------------- ---- ---------
    Config::General       0    2.38     
    Cwd                   0    3.2701   
    ExtUtils::MakeMaker   6.11 6.44     
    File::Copy::Recursive 0    0.36     
    File::HomeDir         0    0.69     
    File::Spec            0.8  3.2701   
    File::UserConfig      0    0.05     
    Log::Dispatch         0    2.21     
    Log::Dispatch::File   0    1.22     
    POSIX                 0    1.16     
    Test::More            0.47 0.80     
    Test::NoWarnings      0    0.084    
    Test::Script          0.01 1.03     
    Text::Wrap            0    2006.1117
    Wx                    0.7  0.83     
    YAML::Tiny            0.31 1.32     

------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------

Environment variables:

    LANG = en_US.utf8
    PATH = /usr/lib/ccache:/home/sand/bin:/usr/local/bin:/usr/bin:/bin:/usr/bin/X11:/usr/games:/usr/local/perl/bin:/usr/X11/bin:/sbin:/usr/sbin
    PERL5LIB = /home/sand/.cpan/build/Proc-Exists-0.11-aG0b2i/blib/arch:/home/sand/.cpan/build/Proc-Exists-0.11-aG0b2i/blib/lib:/home/sand/.cpan/build/parrot-0.6.2-F0EPkJ/blib/arch:/home/sand/.cpan/build/parrot-0.6.2-F0EPkJ/blib/lib
    PERL5OPT = 
    PERL5_CPANPLUS_IS_RUNNING = 31673
    PERL5_CPAN_IS_RUNNING = 31673
    SHELL = /usr/bin/zsh
    TERM = screen

Perl special variables (and OS-specific diagnostics, for MSWin32):

    $^X = /home/src/perl/repoperls/installed-perls/perl/p49Uzgg/perl-5.10.0@33919/bin/perl
    $UID/$EUID = 1005 / 1005
    $GID = 1005 1005
    $EGID = 1005 1005

Perl module toolchain versions installed:

    Module              Have     
    ------------------- ---------
    CPAN                1.9205   
    Cwd                 3.2701   
    ExtUtils::CBuilder  0.23     
    ExtUtils::Command   1.14     
    ExtUtils::Install   1.50_01  
    ExtUtils::MakeMaker 6.44     
    ExtUtils::Manifest  1.51_01  
    ExtUtils::ParseXS   2.19_01  
    File::Spec          3.2701   
    Module::Build       0.2808_02
    Module::Signature   0.55     
    Test::Harness       3.10     
    Test::More          0.80     
    YAML                0.66     
    YAML::Syck          1.04     
    version             0.74     


--

Summary of my perl5 (revision 5 version 11 subversion 0 patch 33919) configuration:
  Platform:
    osname=linux, osvers=2.6.22-1-k7, archname=i686-linux-thread-multi
    uname='linux k75 2.6.22-1-k7 #1 smp sun jul 29 15:15:55 utc 2007 i686 gnulinux '
    config_args='-Dprefix=/home/src/perl/repoperls/installed-perls/perl/p49Uzgg/perl-5.10.0@33919 -Dinstallusrbinperl=n -Uversiononly -Dusedevel -des -Ui_db -Dusethreads'
    hint=recommended, useposix=true, d_sigaction=define
    useithreads=define, usemultiplicity=define
    useperlio=define, d_sfio=undef, uselargefiles=define, usesocks=undef
    use64bitint=undef, use64bitall=undef, uselongdouble=undef
    usemymalloc=n, bincompat5005=undef
  Compiler:
    cc='cc', ccflags ='-D_REENTRANT -D_GNU_SOURCE -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64',
    optimize='-O2',
    cppflags='-D_REENTRANT -D_GNU_SOURCE -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include'
    ccversion='', gccversion='4.1.2 20061115 (prerelease) (Debian 4.1.1-21)', gccosandvers=''
    intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=1234
    d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=12
    ivtype='long', ivsize=4, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8
    alignbytes=4, prototype=define
  Linker and Libraries:
    ld='cc', ldflags =' -fstack-protector -L/usr/local/lib'
    libpth=/usr/local/lib /lib /usr/lib /usr/lib64
    libs=-lnsl -lgdbm -ldb -ldl -lm -lcrypt -lutil -lpthread -lc -lgdbm_compat
    perllibs=-lnsl -ldl -lm -lcrypt -lutil -lpthread -lc
    libc=/lib/libc-2.7.so, so=so, useshrplib=false, libperl=libperl.a
    gnulibc_version='2.7'
  Dynamic Linking:
    dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E'
    cccdlflags='-fPIC', lddlflags='-shared -O2 -L/usr/local/lib -fstack-protector'

• FAIL Kephra-0.3.9.10 i686-linux-thread-multi 2.6.22-1-k7 by andreas.koenig.gmwojprw