FAIL Config-IniSearch-0.01 darwin-thread-multi-64int-2level 8.10.0

This distribution has been tested as part of the cpan-testers
effort to test as many new uploads to CPAN as possible.  See
http://testers.cpan.org/


--

Dear BAK,
    
This is a computer-generated error report created automatically by
CPANPLUS, version 0.84. Testers personal comments may appear 
at the end of this report.


Thank you for uploading your work to CPAN.  However, it appears that
there were some problems testing your distribution.

TEST RESULTS:

Below is the error stack from stage 'make test':

[MSG] [Sat May 31 00:19:29 2008] Trying to get 'ftp://ftp.funet.fi/pub/languages/perl/CPAN/authors/id/B/BA/BAK/Config-IniSearch-0.01.tar.gz'
[MSG] [Sat May 31 00:19:39 2008] Trying to get 'ftp://ftp.funet.fi/pub/languages/perl/CPAN/authors/id/B/BA/BAK/CHECKSUMS'
[MSG] [Sat May 31 00:19:40 2008] Checksum matches for 'Config-IniSearch-0.01.tar.gz'
[MSG] [Sat May 31 00:19:40 2008] Extracted 'Config-IniSearch-0.01/'
[MSG] [Sat May 31 00:19:40 2008] Extracted 'Config-IniSearch-0.01/t/'
[MSG] [Sat May 31 00:19:40 2008] Extracted 'Config-IniSearch-0.01/t/global.ini.etc'
[MSG] [Sat May 31 00:19:40 2008] Extracted 'Config-IniSearch-0.01/t/testSection.ini'
[MSG] [Sat May 31 00:19:40 2008] Extracted 'Config-IniSearch-0.01/t/test.t'
[MSG] [Sat May 31 00:19:40 2008] Extracted 'Config-IniSearch-0.01/t/global.ini'
[MSG] [Sat May 31 00:19:40 2008] Extracted 'Config-IniSearch-0.01/t/testSection.ini.etc'
[MSG] [Sat May 31 00:19:40 2008] Extracted 'Config-IniSearch-0.01/global.ini'
[MSG] [Sat May 31 00:19:40 2008] Extracted 'Config-IniSearch-0.01/IniSearch.pm'
[MSG] [Sat May 31 00:19:40 2008] Extracted 'Config-IniSearch-0.01/README'
[MSG] [Sat May 31 00:19:40 2008] Extracted 'Config-IniSearch-0.01/MANIFEST'
[MSG] [Sat May 31 00:19:40 2008] Extracted 'Config-IniSearch-0.01/IniHash-2.4.patch'
[MSG] [Sat May 31 00:19:40 2008] Extracted 'Config-IniSearch-0.01/Changes'
[MSG] [Sat May 31 00:19:40 2008] Extracted 'Config-IniSearch-0.01/Makefile.PL'
[MSG] [Sat May 31 00:19:40 2008] Extracted 'Config-IniSearch-0.01/testSection.ini'
[MSG] [Sat May 31 00:19:40 2008] Extracted 'Config::IniSearch' to '/Volumes/Media/smoke/perl-5.10.x/.cpanplus/5.10.0/build/Config-IniSearch-0.01'
[MSG] [Sat May 31 00:19:42 2008] Checking if your kit is complete...
Looks good
Writing Makefile for Config::IniSearch

[MSG] [Sat May 31 00:19:42 2008] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value'
[MSG] [Sat May 31 00:19:45 2008] cp IniSearch.pm blib/lib/Config/IniSearch.pm
Manifying blib/man3/Config::IniSearch.3

[ERROR] [Sat May 31 00:19:46 2008] MAKE TEST failed: Illegal seek PERL_DL_NONLAZY=1 /Volumes/Media/smoke/perl-5.10.x/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/test.t
t/test....Can't locate Config/IniHash.pm in @INC (@INC contains: /Volumes/Media/smoke/perl-5.10.x/.cpanplus/5.10.0/build/Config-IniSearch-0.01/blib/lib /Volumes/Media/smoke/perl-5.10.x/.cpanplus/5.10.0/build/Config-IniSearch-0.01/blib/arch /Volumes/Media/smoke/perl-5.10.x/.cpanplus/5.10.0/build/Config-IniSearch-0.01/blib /Volumes/Media/smoke/perl-5.10.x/lib/5.10.0/darwin-thread-multi-64int-2level /Volumes/Media/smoke/perl-5.10.x/lib/5.10.0/darwin-thread-multi-64int-2level /Volumes/Media/smoke/perl-5.10.x/lib/5.10.0 /Volumes/Media/smoke/perl-5.10.x/lib/site_perl/5.10.0/darwin-thread-multi-64int-2level /Volumes/Media/smoke/perl-5.10.x/lib/site_perl/5.10.0/darwin-thread-multi-64int-2level /Volumes/Media/smoke/perl-5.10.x/lib/site_perl/5.10.0 . /Volumes/Media/smoke/perl-5.10.x/lib/5.10.0/darwin-thread-multi-64int-2level /Volumes/Media/smoke/perl-5.10.x/lib/5.10.0 /Volumes/Media/smoke/perl-5.10.x/lib/site_perl/5.10.0/darwin-thread-multi-64int-2level /Volumes/Media/smoke/perl-5.10.x/lib/site_perl/5.10.0 .) at /Volumes/Media/smoke/perl-5.10.x/.cpanplus/5.10.0/build/Config-IniSearch-0.01/blib/lib/Config/IniSearch.pm line 7.
BEGIN failed--compilation aborted at /Volumes/Media/smoke/perl-5.10.x/.cpanplus/5.10.0/build/Config-IniSearch-0.01/blib/lib/Config/IniSearch.pm line 7.
Compilation failed in require at t/test.t line 10.
BEGIN failed--compilation aborted at t/test.t line 10.
dubious
	Test returned status 2 (wstat 512, 0x200)
DIED. FAILED tests 1-12
	Failed 12/12 tests, 0.00% okay
Failed Test Stat Wstat Total Fail  List of Failed
-------------------------------------------------------------------------------
t/test.t       2   512    12   24  1-12
Failed 1/1 test scripts. 12/12 subtests failed.
Files=1, Tests=12,  0 wallclock secs ( 0.12 cusr +  0.05 csys =  0.17 CPU)
Failed 1/1 test programs. 12/12 subtests failed.
make: *** [test_dynamic] Error 2

[MSG] [Sat May 31 00:19:46 2008] DEFAULT 'proceed_on_test_failure' HANDLER RETURNING 'sub return value'


MISSING PREREQUISITES:

It was observed that the test suite seem to fail without these modules:

Config::IniHash

As such, adding the prerequisite module(s) to 'PREREQ_PM' in your
Makefile.PL should solve this problem.  For example:

WriteMakefile(
    AUTHOR      => 'BAK (cpanplus-info@lists.sf.net)',
    ... # other information
    PREREQ_PM   => {
	'Config::IniHash'	=> '0', # or a minimum working version
    }
);

If you are interested in making a more flexible Makefile.PL that can
probe for missing dependencies and install them, ExtUtils::AutoInstall
at <http://search.cpan.org/dist/ExtUtils-AutoInstall/> may be
worth a look.

Thanks! :-)


******************************** NOTE ********************************
The comments above are created mechanically, possibly without manual
checking by the sender.  As there are many people performing automatic
tests on each upload to CPAN, it is likely that you will receive 
identical messages about the same problem.

If you believe that the message is mistaken, please reply to the first
one with correction and/or additional informations, and do not take
it personally.  We appreciate your patience. :)
**********************************************************************

Additional comments:
 

This report was machine-generated by CPAN::YACSmoke 0.0307. Powered by POE::Component::CPAN::YACSmoke.

------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------

Environment variables:

    AUTOMATED_TESTING = 1
    PATH = /bin:/sbin:/usr/bin:/usr/sbin:/usr/local/bin:/usr/local/sbin
    PERL5LIB = :/Volumes/Media/smoke/perl-5.10.x/.cpanplus/5.10.0/build/Config-IniSearch-0.01/blib/lib:/Volumes/Media/smoke/perl-5.10.x/.cpanplus/5.10.0/build/Config-IniSearch-0.01/blib/arch:/Volumes/Media/smoke/perl-5.10.x/.cpanplus/5.10.0/build/Config-IniSearch-0.01/blib
    PERL5_CPANPLUS_IS_RUNNING = 2584
    PERL5_CPANPLUS_IS_VERSION = 0.84
    PERL_MM_USE_DEFAULT = 1
    SHELL = /bin/bash
    TERM = screen

Perl special variables (and OS-specific diagnostics, for MSWin32):

    Perl: $^X = /Volumes/Media/smoke/perl-5.10.x/bin/perl
    UID:  $<  = 502
    EUID: $>  = 502
    GID:  $(  = 502 502
    EGID: $)  = 502 502


-------------------------------


--

Summary of my perl5 (revision 5 version 10 subversion 0 patch 33947) configuration:
  Platform:
    osname=darwin, osvers=8.10.0, archname=darwin-thread-multi-64int-2level
    uname='darwin afalglas.bingosnet.co.uk 8.10.0 darwin kernel version 8.10.0: wed may 23 16:50:59 pdt 2007; root:xnu-792.21.3~1release_ppc power macintosh powerpc '
    config_args='-de -Dprefix=/Volumes/Media/smoke/perl-5.10.x -Dusethreads -Duse64bitint'
    hint=recommended, useposix=true, d_sigaction=define
    useithreads=define, usemultiplicity=define
    useperlio=define, d_sfio=undef, uselargefiles=define, usesocks=undef
    use64bitint=define, use64bitall=undef, uselongdouble=undef
    usemymalloc=n, bincompat5005=undef
  Compiler:
    cc='cc', ccflags ='-fno-common -DPERL_DARWIN -no-cpp-precomp -fno-strict-aliasing -pipe -I/usr/local/include',
    optimize='-O3',
    cppflags='-no-cpp-precomp -fno-common -DPERL_DARWIN -no-cpp-precomp -fno-strict-aliasing -pipe -I/usr/local/include'
    ccversion='', gccversion='4.0.1 (Apple Computer, Inc. build 5367)', gccosandvers=''
    intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=87654321
    d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=16
    ivtype='long long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8
    alignbytes=8, prototype=define
  Linker and Libraries:
    ld='env MACOSX_DEPLOYMENT_TARGET=10.3 cc', ldflags =' -L/usr/local/lib'
    libpth=/usr/local/lib /usr/lib
    libs=-ldbm -ldl -lm -lc
    perllibs=-ldl -lm -lc
    libc=/usr/lib/libc.dylib, so=dylib, useshrplib=false, libperl=libperl.a
    gnulibc_version=''
  Dynamic Linking:
    dlsrc=dl_dlopen.xs, dlext=bundle, d_dlsymun=undef, ccdlflags=' '
    cccdlflags=' ', lddlflags=' -bundle -undefined dynamic_lookup -L/usr/local/lib'

• FAIL Config-IniSearch-0.01 darwin-thread-multi-64int-2level 8.10.0 by chris