FAIL Proc-SafeExec-1.4 i386-netbsd-thread-multi-64int 3.1

This distribution has been tested as part of the cpan-testers
effort to test as many new uploads to CPAN as possible.  See
http://testers.cpan.org/

Please cc any replies to cpan-testers@perl.org to keep other
test volunteers informed and to prevent any duplicate effort.

--

Dear BILBO,
    
This is a computer-generated error report created automatically by
CPANPLUS, version 0.82. Testers personal comments may appear 
at the end of this report.


Thank you for uploading your work to CPAN.  However, it appears that
there were some problems testing your distribution.

TEST RESULTS:

Below is the error stack from stage 'make test':

[MSG] [Sat May 31 02:19:25 2008] Trying to get 'http://www.cpan.org/authors/id/B/BI/BILBO/CHECKSUMS'
[MSG] [Sat May 31 02:19:26 2008] Checksum matches for 'Proc-SafeExec-1.4.tar.gz'
[MSG] [Sat May 31 02:19:26 2008] Extracted 'Proc-SafeExec-1.4'
[MSG] [Sat May 31 02:19:26 2008] Extracted 'Proc-SafeExec-1.4/lib'
[MSG] [Sat May 31 02:19:26 2008] Extracted 'Proc-SafeExec-1.4/MANIFEST'
[MSG] [Sat May 31 02:19:26 2008] Extracted 'Proc-SafeExec-1.4/t'
[MSG] [Sat May 31 02:19:26 2008] Extracted 'Proc-SafeExec-1.4/Makefile.PL'
[MSG] [Sat May 31 02:19:26 2008] Extracted 'Proc-SafeExec-1.4/META.yml'
[MSG] [Sat May 31 02:19:26 2008] Extracted 'Proc-SafeExec-1.4/t/Proc-SafeExec.t'
[MSG] [Sat May 31 02:19:26 2008] Extracted 'Proc-SafeExec-1.4/lib/Proc'
[MSG] [Sat May 31 02:19:26 2008] Extracted 'Proc-SafeExec-1.4/lib/Proc/SafeExec'
[MSG] [Sat May 31 02:19:26 2008] Extracted 'Proc-SafeExec-1.4/lib/Proc/SafeExec.pm'
[MSG] [Sat May 31 02:19:26 2008] Extracted 'Proc-SafeExec-1.4/lib/Proc/SafeExec/Queue.pm'
[MSG] [Sat May 31 02:19:26 2008] Extracted 'Proc::SafeExec' to '/home/cpan/perl562/.cpanplus/5.6.2/build/Proc-SafeExec-1.4'
[MSG] [Sat May 31 02:19:26 2008] Checking if your kit is complete...
Looks good
Writing Makefile for Proc::SafeExec

[MSG] [Sat May 31 02:19:26 2008] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value'
[MSG] [Sat May 31 02:19:28 2008] cp lib/Proc/SafeExec.pm blib/lib/Proc/SafeExec.pm
cp lib/Proc/SafeExec/Queue.pm blib/lib/Proc/SafeExec/Queue.pm
Manifying blib/man3/Proc::SafeExec.3
Manifying blib/man3/Proc::SafeExec::Queue.3

[ERROR] [Sat May 31 02:19:28 2008] MAKE TEST failed:  PERL_DL_NONLAZY=1 /home/cpan/perl562/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
t/Proc-SafeExec....# Failed test 2 in t/Proc-SafeExec.t at line 18
#  t/Proc-SafeExec.t line 18 is: ok(not Proc::SafeExec::test() =~ qr/(^|\n)not ok/s);
FAILED test 2
	Failed 1/2 tests, 50.00% okay
Failed Test       Stat Wstat Total Fail  List of Failed
-------------------------------------------------------------------------------
t/Proc-SafeExec.t                2    1  2
Failed 1/1 test scripts. 1/2 subtests failed.
Files=1, Tests=2,  0 wallclock secs ( 0.19 cusr +  0.09 csys =  0.28 CPU)
Failed 1/1 test programs. 1/2 subtests failed.
gmake: *** [test_dynamic] Error 35

[MSG] [Sat May 31 02:19:28 2008] DEFAULT 'proceed_on_test_failure' HANDLER RETURNING 'sub return value'


******************************** NOTE ********************************
The comments above are created mechanically, possibly without manual
checking by the sender.  As there are many people performing automatic
tests on each upload to CPAN, it is likely that you will receive 
identical messages about the same problem.

If you believe that the message is mistaken, please reply to the first
one with correction and/or additional informations, and do not take
it personally.  We appreciate your patience. :)
**********************************************************************

Additional comments:
 

This report was machine-generated by CPAN::YACSmoke 0.0307.

------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------

Environment variables:

    AUTOMATED_TESTING = 1
    PATH = /home/cpan/bin:/bin:/sbin:/usr/bin:/usr/sbin:/usr/X11R6/bin:/usr/pkg/bin:/usr/pkg/sbin:/usr/games:/usr/local/bin:/usr/local/sbin
    PERL5LIB = :/home/cpan/perl562/.cpanplus/5.6.2/build/Proc-SafeExec-1.4/blib/lib:/home/cpan/perl562/.cpanplus/5.6.2/build/Proc-SafeExec-1.4/blib/arch:/home/cpan/perl562/.cpanplus/5.6.2/build/Proc-SafeExec-1.4/blib
    PERL5_CPANPLUS_IS_EXECUTING = 
    PERL5_CPANPLUS_IS_RUNNING = 1730
    PERL5_CPANPLUS_IS_VERSION = 0.82
    PERL_MM_USE_DEFAULT = 1
    SHELL = /usr/pkg/bin/bash
    TERM = screen

Perl special variables (and OS-specific diagnostics, for MSWin32):

    Perl: $^X = /home/cpan/perl562/bin/perl
    UID:  $<  = 1002
    EUID: $>  = 1002
    GID:  $(  = 100 100
    EGID: $)  = 100 100


-------------------------------


--

Summary of my perl5 (revision 5.0 version 6 subversion 2) configuration:
  Platform:
    osname=netbsd, osvers=3.1, archname=i386-netbsd-thread-multi-64int
    uname='netbsd canker.bingosnet.co.uk 3.1 netbsd 3.1 (generic_laptop) #0: tue oct 31 04:32:05 utc 2006 builds@b0.netbsd.org:homebuildsabnetbsd-3-1-releasei386200610302053z-objhomebuildsabnetbsd-3-1-releasesrcsysarchi386compilegeneric_laptop i386 '
    config_args=''
    hint=recommended, useposix=true, d_sigaction=define
    usethreads=define use5005threads=undef useithreads=define usemultiplicity=define
    useperlio=undef d_sfio=undef uselargefiles=define usesocks=undef
    use64bitint=define use64bitall=undef uselongdouble=undef
  Compiler:
    cc='cc', ccflags ='-fno-strict-aliasing -I/usr/pkg/include',
    optimize='-O',
    cppflags='-fno-strict-aliasing -I/usr/pkg/include'
    ccversion='', gccversion='3.3.3 (NetBSD nb3 20040520)', gccosandvers=''
    intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=12345678
    d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=12
    ivtype='long long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8
    alignbytes=4, usemymalloc=n, prototype=define
  Linker and Libraries:
    ld='cc', ldflags =' -Wl,-rpath,/usr/pkg/lib -Wl,-rpath,/usr/local/lib -L/usr/pkg/lib'
    libpth=/usr/pkg/lib /lib /usr/lib
    libs=-lgdbm -lm -lc -lposix -lcrypt -lutil -lpthread
    perllibs=-lm -lc -lposix -lcrypt -lutil -lpthread
    libc=/lib/libc.so, so=so, useshrplib=false, libperl=libperl.a
  Dynamic Linking:
    dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E '
    cccdlflags='-DPIC -fPIC ', lddlflags='--whole-archive -shared  -L/usr/pkg/lib'

• FAIL Proc-SafeExec-1.4 i386-netbsd-thread-multi-64int 3.1 by chris