Front page | perl.cpan.testers |
Postings from May 2008
FAIL NCustom-0.07 i686-linux-thread-multi-64int-ld 2.6.24-16-generic
From:
DAGOLDEN
Date:
May 31, 2008 10:26
Subject:
FAIL NCustom-0.07 i686-linux-thread-multi-64int-ld 2.6.24-16-generic
This distribution has been tested as part of the cpan-testers
effort to test as many new uploads to CPAN as possible. See
http://testers.cpan.org/
--
Dear Bane Harbinger,
This is a computer-generated report for NCustom-0.07
on perl 5.10.0 patch 33823, created by CPAN-Reporter-1.15.
Thank you for uploading your work to CPAN. However, there was a problem
testing your distribution.
If you think this report is invalid, please consult the CPAN Testers Wiki
for suggestions on how to avoid getting FAIL reports for missing library
or binary dependencies, unsupported operating systems, and so on:
http://cpantest.grango.org/wiki/CPANAuthorNotes
Sections of this report:
* Tester comments
* Program output
* Prerequisites
* Environment and other context
------------------------------
TESTER COMMENTS
------------------------------
Additional comments from tester:
this report is from an automated smoke testing program
and was not reviewed by a human for accuracy
------------------------------
PROGRAM OUTPUT
------------------------------
Output from '/usr/bin/make test':
make: pod2test: Command not found
make: [testifypods] Error 127 (ignored)
make: pod2test: Command not found
make: [testifypods] Error 127 (ignored)
make: pod2test: Command not found
make: [testifypods] Error 127 (ignored)
PERL_DL_NONLAZY=1 /home/david/perl/5.10.x-threads/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
t/embedded-bin-ncustom.........
# Failed test at bin/ncustom line 146.
# 'Can't locate YAML/Syck.pm in @INC (@INC contains: /home/david/.cpan/build/NCustom-0.07-m1bwTq/blib/lib /home/david/.cpan/build/NCustom-0.07-m1bwTq/blib/arch /home/david/perl/5.10.x-threads/lib/5.10.0 /etc/perl /usr/local/lib/perl/5.8.8 /usr/local/share/perl/5.8.8 /usr/lib/perl5 /usr/share/perl5 /usr/lib/perl/5.8 /usr/share/perl/5.8 /usr/local/lib/site_perl .) at /home/david/perl/5.10.x-threads/lib/5.10.0/CPAN/PERL5INC.pm line 60.
# BEGIN failed--compilation aborted.
# '
# doesn't match '(?m-xis:Usage:)'
# TEST:<general> displays useage for invalid arguments
# Failed test at bin/ncustom line 152.
# 'Can't locate YAML/Syck.pm in @INC (@INC contains: /home/david/.cpan/build/NCustom-0.07-m1bwTq/blib/lib /home/david/.cpan/build/NCustom-0.07-m1bwTq/blib/arch /home/david/perl/5.10.x-threads/lib/5.10.0 /etc/perl /usr/local/lib/perl/5.8.8 /usr/local/share/perl/5.8.8 /usr/lib/perl5 /usr/share/perl5 /usr/lib/perl/5.8 /usr/share/perl/5.8 /usr/local/lib/site_perl .) at /home/david/perl/5.10.x-threads/lib/5.10.0/CPAN/PERL5INC.pm line 60.
# BEGIN failed--compilation aborted.
# '
# doesn't match '(?m-xis:Usage:)'
# TEST:<general> displays useage for no arguments
Can't locate YAML/Syck.pm in @INC (@INC contains: /home/david/.cpan/build/NCustom-0.07-m1bwTq/blib/lib /home/david/.cpan/build/NCustom-0.07-m1bwTq/blib/arch /home/david/perl/5.10.x-threads/lib/5.10.0 /etc/perl /usr/local/lib/perl/5.8.8 /usr/local/share/perl/5.8.8 /usr/lib/perl5 /usr/share/perl5 /usr/lib/perl/5.8 /usr/share/perl/5.8 /usr/local/lib/site_perl .) at /home/david/perl/5.10.x-threads/lib/5.10.0/CPAN/PERL5INC.pm line 60.
BEGIN failed--compilation aborted.
# Failed test at bin/ncustom line 178.
# TEST:<initialise> returns success for void initialisation
# Failed test at bin/ncustom line 182.
# TEST:<test setup> require ~/.ncustom...
Can't locate YAML/Syck.pm in @INC (@INC contains: /home/david/.cpan/build/NCustom-0.07-m1bwTq/blib/lib /home/david/.cpan/build/NCustom-0.07-m1bwTq/blib/arch /home/david/perl/5.10.x-threads/lib/5.10.0 /etc/perl /usr/local/lib/perl/5.8.8 /usr/local/share/perl/5.8.8 /usr/lib/perl5 /usr/share/perl5 /usr/lib/perl/5.8 /usr/share/perl/5.8 /usr/local/lib/site_perl .) at /home/david/perl/5.10.x-threads/lib/5.10.0/CPAN/PERL5INC.pm line 60.
BEGIN failed--compilation aborted.
# Failed test at bin/ncustom line 189.
# TEST:<initialise> returns success for initialisation
# Failed test at bin/ncustom line 191.
# TEST:<initialise> purges transactions
Can't locate YAML/Syck.pm in @INC (@INC contains: /home/david/.cpan/build/NCustom-0.07-m1bwTq/blib/lib /home/david/.cpan/build/NCustom-0.07-m1bwTq/blib/arch /home/david/perl/5.10.x-threads/lib/5.10.0 /etc/perl /usr/local/lib/perl/5.8.8 /usr/local/share/perl/5.8.8 /usr/lib/perl5 /usr/share/perl5 /usr/lib/perl/5.8 /usr/share/perl/5.8 /usr/local/lib/site_perl .) at /home/david/perl/5.10.x-threads/lib/5.10.0/CPAN/PERL5INC.pm line 60.
BEGIN failed--compilation aborted.
# Failed test at bin/ncustom line 349.
# TEST:<blat_myconfig> returns success for void initialisation
# Failed test at bin/ncustom line 351.
# got: '-1'
# expected: '0'
# TEST:<blat_myconfig> MyConfig.pm replaced by Config.pm
Can't locate YAML/Syck.pm in @INC (@INC contains: /home/david/.cpan/build/NCustom-0.07-m1bwTq/blib/lib /home/david/.cpan/build/NCustom-0.07-m1bwTq/blib/arch /home/david/perl/5.10.x-threads/lib/5.10.0 /etc/perl /usr/local/lib/perl/5.8.8 /usr/local/share/perl/5.8.8 /usr/lib/perl5 /usr/share/perl5 /usr/lib/perl/5.8 /usr/share/perl/5.8 /usr/local/lib/site_perl .) at /home/david/perl/5.10.x-threads/lib/5.10.0/CPAN/PERL5INC.pm line 60.
BEGIN failed--compilation aborted.
Can't locate YAML/Syck.pm in @INC (@INC contains: /home/david/.cpan/build/NCustom-0.07-m1bwTq/blib/lib /home/david/.cpan/build/NCustom-0.07-m1bwTq/blib/arch /home/david/perl/5.10.x-threads/lib/5.10.0 /etc/perl /usr/local/lib/perl/5.8.8 /usr/local/share/perl/5.8.8 /usr/lib/perl5 /usr/share/perl5 /usr/lib/perl/5.8 /usr/share/perl/5.8 /usr/local/lib/site_perl .) at /home/david/perl/5.10.x-threads/lib/5.10.0/CPAN/PERL5INC.pm line 60.
BEGIN failed--compilation aborted.
Can't locate YAML/Syck.pm in @INC (@INC contains: /home/david/.cpan/build/NCustom-0.07-m1bwTq/blib/lib /home/david/.cpan/build/NCustom-0.07-m1bwTq/blib/arch /home/david/perl/5.10.x-threads/lib/5.10.0 /etc/perl /usr/local/lib/perl/5.8.8 /usr/local/share/perl/5.8.8 /usr/lib/perl5 /usr/share/perl5 /usr/lib/perl/5.8 /usr/share/perl/5.8 /usr/local/lib/site_perl .) at /home/david/perl/5.10.x-threads/lib/5.10.0/CPAN/PERL5INC.pm line 60.
BEGIN failed--compilation aborted.
# TEST:<undo> undoes transactions
Can't locate YAML/Syck.pm in @INC (@INC contains: /home/david/.cpan/build/NCustom-0.07-m1bwTq/blib/lib /home/david/.cpan/build/NCustom-0.07-m1bwTq/blib/arch /home/david/perl/5.10.x-threads/lib/5.10.0 /etc/perl /usr/local/lib/perl/5.8.8 /usr/local/share/perl/5.8.8 /usr/lib/perl5 /usr/share/perl5 /usr/lib/perl/5.8 /usr/share/perl/5.8 /usr/local/lib/site_perl .) at /home/david/perl/5.10.x-threads/lib/5.10.0/CPAN/PERL5INC.pm line 60.
BEGIN failed--compilation aborted.
Can't locate YAML/Syck.pm in @INC (@INC contains: /home/david/.cpan/build/NCustom-0.07-m1bwTq/blib/lib /home/david/.cpan/build/NCustom-0.07-m1bwTq/blib/arch /home/david/perl/5.10.x-threads/lib/5.10.0 /etc/perl /usr/local/lib/perl/5.8.8 /usr/local/share/perl/5.8.8 /usr/lib/perl5 /usr/share/perl5 /usr/lib/perl/5.8 /usr/share/perl/5.8 /usr/local/lib/site_perl .) at /home/david/perl/5.10.x-threads/lib/5.10.0/CPAN/PERL5INC.pm line 60.
BEGIN failed--compilation aborted.
# Failed test at bin/ncustom line 318.
# TEST:<ncustom> fetches and executes file from given dir
# Failed test at bin/ncustom line 320.
# TEST:<ncustom> fetches and executes file from default dir
# Failed test at bin/ncustom line 322.
# TEST:<ncustom> fetches and executes file from default url
# Failed test at bin/ncustom line 324.
# TEST:<ncustom> fetches and executes file from given url
# readline() on closed filehandle STUBSLOG at bin/ncustom line 315.
Can't locate YAML/Syck.pm in @INC (@INC contains: /home/david/.cpan/build/NCustom-0.07-m1bwTq/blib/lib /home/david/.cpan/build/NCustom-0.07-m1bwTq/blib/arch /home/david/perl/5.10.x-threads/lib/5.10.0 /etc/perl /usr/local/lib/perl/5.8.8 /usr/local/share/perl/5.8.8 /usr/lib/perl5 /usr/share/perl5 /usr/lib/perl/5.8 /usr/share/perl/5.8 /usr/local/lib/site_perl .) at /home/david/perl/5.10.x-threads/lib/5.10.0/CPAN/PERL5INC.pm line 60.
BEGIN failed--compilation aborted.
Can't locate YAML/Syck.pm in @INC (@INC contains: /home/david/.cpan/build/NCustom-0.07-m1bwTq/blib/lib /home/david/.cpan/build/NCustom-0.07-m1bwTq/blib/arch /home/david/perl/5.10.x-threads/lib/5.10.0 /etc/perl /usr/local/lib/perl/5.8.8 /usr/local/share/perl/5.8.8 /usr/lib/perl5 /usr/share/perl5 /usr/lib/perl/5.8 /usr/share/perl/5.8 /usr/local/lib/site_perl .) at /home/david/perl/5.10.x-threads/lib/5.10.0/CPAN/PERL5INC.pm line 60.
BEGIN failed--compilation aborted.
Can't locate YAML/Syck.pm in @INC (@INC contains: /home/david/.cpan/build/NCustom-0.07-m1bwTq/blib/lib /home/david/.cpan/build/NCustom-0.07-m1bwTq/blib/arch /home/david/perl/5.10.x-threads/lib/5.10.0 /etc/perl /usr/local/lib/perl/5.8.8 /usr/local/share/perl/5.8.8 /usr/lib/perl5 /usr/share/perl5 /usr/lib/perl/5.8 /usr/share/perl/5.8 /usr/local/lib/site_perl .) at /home/david/perl/5.10.x-threads/lib/5.10.0/CPAN/PERL5INC.pm line 60.
BEGIN failed--compilation aborted.
Can't locate YAML/Syck.pm in @INC (@INC contains: /home/david/.cpan/build/NCustom-0.07-m1bwTq/blib/lib /home/david/.cpan/build/NCustom-0.07-m1bwTq/blib/arch /home/david/perl/5.10.x-threads/lib/5.10.0 /etc/perl /usr/local/lib/perl/5.8.8 /usr/local/share/perl/5.8.8 /usr/lib/perl5 /usr/share/perl5 /usr/lib/perl/5.8 /usr/share/perl/5.8 /usr/local/lib/site_perl .) at /home/david/perl/5.10.x-threads/lib/5.10.0/CPAN/PERL5INC.pm line 60.
BEGIN failed--compilation aborted.
# Failed test at bin/ncustom line 411.
# TEST:<config_edit> can edit(add) src_fqdn
# Failed test at bin/ncustom line 413.
# TEST:<config_edit> can edit(add) test_url1
# readline() on closed filehandle MYCFG at bin/ncustom line 409.
# Looks like you failed 14 tests of 23.
Dubious, test returned 14 (wstat 3584, 0xe00)
Failed 14/23 subtests
t/embedded-NCustom-Config......
# Failed test at lib/NCustom/Config.pm line 87.
# TEST:<get_url> fetches file into dir from url
# Failed test at lib/NCustom/Config.pm line 89.
# TEST:<get_url> returns success when successful
# Looks like you failed 2 tests of 5.
Dubious, test returned 2 (wstat 512, 0x200)
Failed 2/5 subtests
t/embedded-NCustom.............
# Failed test at lib/NCustom.pm line 282.
# TEST:<crud_gaurantee> says if you can update a file.
# Failed test at lib/NCustom.pm line 300.
# TEST:<crud_gaurantee> says if you can ru a file (short notation).
# Failed test at lib/NCustom.pm line 1256.
# got: 'MISSING'
# expected: 'OK'
# TEST:<check_pkg> checks if package meets minimum version 2/4
# Failed test at lib/NCustom.pm line 1259.
# got: 'MISSING'
# expected: 'OK'
# TEST:<check_pkg> checks if package meets minimum version 3/4
# Failed test at lib/NCustom.pm line 1262.
# got: 'MISSING'
# expected: 'BELOW'
# TEST:<check_pkg> checks if package meets minimum version 4/4
# Failed test at lib/NCustom.pm line 1266.
# got: 'MISSING'
# expected: 'ABOVE'
# TEST:<check_pkg> checks if package meets maximum version 2/4
# Failed test at lib/NCustom.pm line 1269.
# got: 'MISSING'
# expected: 'OK'
# TEST:<check_pkg> checks if package meets maximum version 3/4
# Failed test at lib/NCustom.pm line 1272.
# got: 'MISSING'
# expected: 'OK'
# TEST:<check_pkg> checks if package meets maximum version 4/4
# Failed test at lib/NCustom.pm line 1276.
# got: 'MISSING'
# expected: 'ABOVE'
# TEST:<check_pkg> checks if package meets exact version 2/4
# Failed test at lib/NCustom.pm line 1279.
# got: 'MISSING'
# expected: 'OK'
# TEST:<check_pkg> checks if package meets exact version 3/4
# Failed test at lib/NCustom.pm line 1282.
# got: 'MISSING'
# expected: 'BELOW'
# TEST:<check_pkg> checks if package meets exact version 4/4
# Failed test at lib/NCustom.pm line 1286.
# got: 'OK'
# expected: 'UNWELCOME'
# TEST:<check_pkg> checks if package present 2/4
# Failed test at lib/NCustom.pm line 1289.
# got: 'OK'
# expected: 'UNWELCOME'
# TEST:<check_pkg> checks if package present 3/4
# Failed test at lib/NCustom.pm line 1292.
# got: 'OK'
# expected: 'UNWELCOME'
# TEST:<check_pkg> checks if package present 4/4
# Failed test at lib/NCustom.pm line 460.
# got: '0'
# expected: '1'
# TEST:<save_files> if a file is saved to an archive, and it is already there:
# TEST: - the file will be saved with a suffix
# Failed test at lib/NCustom.pm line 469.
# got: '0'
# expected: '1'
# TEST:<save_files> if a file is saved to an archive, and it is already there:
# TEST: - if there is no change it wont be saved again
# Failed test at lib/NCustom.pm line 739.
# got: '1'
# expected: '0'
# TEST:<overwrite_file>
# TEST: - will strip a given pattern from the text
# commit_file: Cant clobber existing plain-file: /home/david/.cpan/build/NCustom-0.07-m1bwTq/t/embedded-NCustom.o/dir6/file2. at lib/NCustom.pm line 707
# Failed test at lib/NCustom.pm line 894.
# got: '1'
# expected: '0'
# TEST:<append_file>
# TEST: - will strip a given pattern from the text
# commit_file: Cant clobber existing plain-file: /home/david/.cpan/build/NCustom-0.07-m1bwTq/t/embedded-NCustom.o/dir7/file2. at lib/NCustom.pm line 873
# Failed test at lib/NCustom.pm line 959.
# got: '1'
# expected: '0'
# TEST:<prepend_file>
# TEST: - will strip a given pattern from the text
# commit_file: Cant clobber existing plain-file: /home/david/.cpan/build/NCustom-0.07-m1bwTq/t/embedded-NCustom.o/dir8/file2. at lib/NCustom.pm line 937
# Failed test at lib/NCustom.pm line 1032.
# got: '1'
# expected: '0'
# TEST:<edit_file>
# TEST: - simple edit file
# Failed test at lib/NCustom.pm line 1038.
# got: '1'
# expected: '0'
# TEST:<edit_file>
# TEST: - multi substitution edit
# Failed test at lib/NCustom.pm line 1043.
# got: '1'
# expected: '0'
# TEST:<edit_file> - edits multiple files 1/3.
# Failed test at lib/NCustom.pm line 1045.
# got: '1'
# expected: '0'
# TEST:<edit_file> - edits multiple files 2/3.
# Failed test at lib/NCustom.pm line 1047.
# got: '1'
# expected: '0'
# TEST:<edit_file> - edits multiple files 3/3.
# commit_file: Cant clobber existing plain-file: /home/david/.cpan/build/NCustom-0.07-m1bwTq/t/embedded-NCustom.o/dir9/file1. at lib/NCustom.pm line 1000
# commit_file: Cant clobber existing plain-file: /home/david/.cpan/build/NCustom-0.07-m1bwTq/t/embedded-NCustom.o/dir9/file2. at lib/NCustom.pm line 1002
# commit_file: Cant clobber existing plain-file: /home/david/.cpan/build/NCustom-0.07-m1bwTq/t/embedded-NCustom.o/dir9/file3. at lib/NCustom.pm line 1012
# commit_file: Cant clobber existing plain-file: /home/david/.cpan/build/NCustom-0.07-m1bwTq/t/embedded-NCustom.o/dir10/file1. at lib/NCustom.pm line 1012
# commit_file: Cant clobber existing plain-file: /home/david/.cpan/build/NCustom-0.07-m1bwTq/t/embedded-NCustom.o/dir10/file2. at lib/NCustom.pm line 1012
# Failed test at lib/NCustom.pm line 1404.
# 'As EXACTLY version 9.9.9 of acme was MISSING - we are going to fetch FILE from URL and execute it.
# This should set things right.
# '
# doesn't match '(?-xism:Dont be stupid)'
# TEST:<required_packages> executes simple statements
# Failed test at lib/NCustom.pm line 1406.
# 'As EXACTLY version 9.9.9 of acme was MISSING - we are going to fetch FILE from URL and execute it.
# This should set things right.
# '
# doesn't match '(?-xism:Hello9)'
# TEST:<required_packages> executes compound statements
Can't locate YAML/Syck.pm in @INC (@INC contains: /home/david/.cpan/build/NCustom-0.07-m1bwTq/blib/lib /home/david/.cpan/build/NCustom-0.07-m1bwTq/blib/arch /home/david/perl/5.10.x-threads/lib/5.10.0 /etc/perl /usr/local/lib/perl/5.8.8 /usr/local/share/perl/5.8.8 /usr/lib/perl5 /usr/share/perl5 /usr/lib/perl/5.8 /usr/share/perl/5.8 /usr/local/lib/site_perl .) at /home/david/perl/5.10.x-threads/lib/5.10.0/CPAN/PERL5INC.pm line 60.
BEGIN failed--compilation aborted.
Can't locate YAML/Syck.pm in @INC (@INC contains: /home/david/.cpan/build/NCustom-0.07-m1bwTq/blib/lib /home/david/.cpan/build/NCustom-0.07-m1bwTq/blib/arch /home/david/perl/5.10.x-threads/lib/5.10.0 /etc/perl /usr/local/lib/perl/5.8.8 /usr/local/share/perl/5.8.8 /usr/lib/perl5 /usr/share/perl5 /usr/lib/perl/5.8 /usr/share/perl/5.8 /usr/local/lib/site_perl .) at /home/david/perl/5.10.x-threads/lib/5.10.0/CPAN/PERL5INC.pm line 60.
BEGIN failed--compilation aborted.
# Failed test at lib/NCustom.pm line 1900.
# TEST:<ncustom> fetches and executes file 1/2
# Failed test at lib/NCustom.pm line 1902.
# TEST:<ncustom> fetches and executes file 2/2
# ncustom_try_dir: system call=/home/david/.cpan/build/NCustom-0.07-m1bwTq/t/embedded-NCustom.o/test1.ncus : error=512
# at lib/NCustom.pm line 1883
# ncustom_try_dir: system call=/home/david/.cpan/build/NCustom-0.07-m1bwTq/t/embedded-NCustom.o/test2.ncus : error=512
# at lib/NCustom.pm line 1883
# Looks like you failed 28 tests of 137.
Dubious, test returned 28 (wstat 7168, 0x1c00)
Failed 28/137 subtests
(less 6 skipped subtests: 103 okay)
(1 TODO test unexpectedly succeeded)
t/general......................ok
Test Summary Report
-------------------
t/embedded-bin-ncustom.t (Wstat: 3584 Tests: 23 Failed: 14)
Failed tests: 4, 6, 8-9, 11-14, 17-20, 22-23
Non-zero exit status: 14
t/embedded-NCustom-Config.t (Wstat: 512 Tests: 5 Failed: 2)
Failed tests: 3-4
Non-zero exit status: 2
t/embedded-NCustom.t (Wstat: 7168 Tests: 137 Failed: 28)
Failed tests: 14, 21, 32-43, 80-81, 89, 94, 99, 103-107
123-124, 136-137
TODO passed: 9
Non-zero exit status: 28
Files=4, Tests=166, 3 wallclock secs ( 0.00 usr 0.05 sys + 0.86 cusr 1.41 csys = 2.32 CPU)
Result: FAIL
Failed 3/4 test programs. 44/166 subtests failed.
make: *** [test_dynamic] Error 255
------------------------------
PREREQUISITES
------------------------------
Prerequisite modules loaded:
No requirements found
------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------
Environment variables:
AUTOMATED_TESTING = 1
LANG = en_US.UTF-8
LD_LIBRARY_PATH = /home/david/opt/subversion/lib
PATH = .:/home/david/bin:/home/david/git/utility-scripts:/home/david/perl/current/bin:.:/home/david/bin:/home/david/git/utility-scripts:/home/david/perl/current/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games
PERL5LIB = /home/david/perl/5.10.x-threads/lib/5.10.0
PERL5OPT = -MCPAN::PERL5INC=yaml_module,YAML::Syck,tempfile,/tmp/cpan_perl5inc_VHCi.txt
PERL5_CPANPLUS_IS_RUNNING = 12998
PERL5_CPAN_IS_RUNNING = 12998
PERL5_CPAN_IS_RUNNING_IN_RECURSION = 4717,12998
PERL_CR_SMOKER_CURRENT = NCustom-0.07
PERL_MM_USE_DEFAULT = 1
SHELL = /bin/bash
TERM = screen
Perl special variables (and OS-specific diagnostics, for MSWin32):
$^X = /home/david/perl/5.10.x-threads/bin/perl
$UID/$EUID = 1000 / 1000
$GID = 1000 4 20 24 25 29 30 44 46 107 115 116 1000
$EGID = 1000 4 20 24 25 29 30 44 46 107 115 116 1000
Perl module toolchain versions installed:
Module Have
------------------- ---------
CPAN 1.92_62
Cwd 3.2701
ExtUtils::CBuilder 0.23
ExtUtils::Command 1.13
ExtUtils::Install 1.50_01
ExtUtils::MakeMaker 6.44
ExtUtils::Manifest 1.51_01
ExtUtils::ParseXS 2.19_01
File::Spec 3.2701
Module::Build 0.2808_01
Module::Signature n/a
Test::Harness 3.10
Test::More 0.80
YAML 0.66
YAML::Syck 1.04
version 0.74
--
Summary of my perl5 (revision 5 version 10 subversion 0 patch 33823) configuration:
Platform:
osname=linux, osvers=2.6.24-16-generic, archname=i686-linux-thread-multi-64int-ld
uname='linux griffon 2.6.24-16-generic #1 smp thu apr 10 13:23:42 utc 2008 i686 gnulinux '
config_args='-de -Uversiononly -Dusedevel -Dusemorebits -Dprefix=/home/david/perl/5.10.x-threads -Dmydomain=.hyperbolic.net -Dcf_email=dagolden@cpan.org -Dperladmin=dagolden@cpan.org -Dcc=gcc -Dusethreads'
hint=recommended, useposix=true, d_sigaction=define
useithreads=define, usemultiplicity=define
useperlio=define, d_sfio=undef, uselargefiles=define, usesocks=undef
use64bitint=define, use64bitall=undef, uselongdouble=define
usemymalloc=n, bincompat5005=undef
Compiler:
cc='gcc', ccflags ='-D_REENTRANT -D_GNU_SOURCE -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64',
optimize='-O2',
cppflags='-D_REENTRANT -D_GNU_SOURCE -fno-strict-aliasing -pipe -I/usr/local/include'
ccversion='', gccversion='4.2.3 (Ubuntu 4.2.3-2ubuntu7)', gccosandvers=''
intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=12345678
d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=12
ivtype='long long', ivsize=8, nvtype='long double', nvsize=12, Off_t='off_t', lseeksize=8
alignbytes=4, prototype=define
Linker and Libraries:
ld='gcc', ldflags =' -L/usr/local/lib'
libpth=/usr/local/lib /lib /usr/lib
libs=-lnsl -ldl -lm -lcrypt -lutil -lpthread -lc
perllibs=-lnsl -ldl -lm -lcrypt -lutil -lpthread -lc
libc=/lib/libc-2.7.so, so=so, useshrplib=false, libperl=libperl.a
gnulibc_version='2.7'
Dynamic Linking:
dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E'
cccdlflags='-fPIC', lddlflags='-shared -O2 -L/usr/local/lib'
-
FAIL NCustom-0.07 i686-linux-thread-multi-64int-ld 2.6.24-16-generic
by DAGOLDEN