Front page | perl.cpan.testers |
Postings from June 2008
FAIL yagg-1.4001 i686-linux-64int-ld 2.6.24-16-generic
Thread Next
From:
DAGOLDEN
Date:
June 2, 2008 16:46
Subject:
FAIL yagg-1.4001 i686-linux-64int-ld 2.6.24-16-generic
This distribution has been tested as part of the cpan-testers
effort to test as many new uploads to CPAN as possible. See
http://testers.cpan.org/
--
Dear David Coppit,
This is a computer-generated report for yagg-1.4001
on perl 5.10.0, created by CPAN-Reporter-1.15.
Thank you for uploading your work to CPAN. However, there was a problem
testing your distribution.
If you think this report is invalid, please consult the CPAN Testers Wiki
for suggestions on how to avoid getting FAIL reports for missing library
or binary dependencies, unsupported operating systems, and so on:
http://cpantest.grango.org/wiki/CPANAuthorNotes
Sections of this report:
* Tester comments
* Program output
* Prerequisites
* Environment and other context
------------------------------
TESTER COMMENTS
------------------------------
Additional comments from tester:
this report is from an automated smoke testing program
and was not reviewed by a human for accuracy
------------------------------
PROGRAM OUTPUT
------------------------------
Output from '/home/david/perl/5.10.0/bin/perl Makefile.PL':
Would you like to install this package into a location other than the
default Perl location (i.e. change the PREFIX)? [n] n
------------------------------------------------------------------------------
yagg uses a number of external programs. For security reasons, it is best if
you provide their full path. In the following prompts, we will try to guess
these paths from your Perl configuration and your $PATH.
You MUST specify GNU make. ssh is only necessary if you plan to use the remote
execution capabilities of the -o flag. yapp is part of the Parse::Yapp Perl
module distribution.
Enter the full path, or "none" for none.
Where can I find your "ar" executable? [/usr/bin/ar] /usr/bin/ar
Where can I find your "chmod" executable? [/bin/chmod] /bin/chmod
Where can I find your "cp" executable? [/bin/cp] /bin/cp
Where can I find your "cpp" executable? [/usr/bin/cpp] /usr/bin/cpp
Where can I find your "date" executable? [/bin/date] /bin/date
Where can I find your "dirname" executable? [/usr/bin/dirname] /usr/bin/dirname
Where can I find your "expr" executable? [/usr/bin/expr] /usr/bin/expr
Where can I find your "find" executable? (GNU, or Non-GNU types) [/usr/bin/find] /usr/bin/find
Where can I find your "g++" executable? (GNU type) [/usr/bin/g++] /usr/bin/g++
Where can I find your "grep" executable? [/bin/grep] /bin/grep
Where can I find your "ln" executable? [/bin/ln] /bin/ln
Where can I find your "make" executable? (GNU type) [/usr/bin/make] /usr/bin/make
Where can I find your "mkdir" executable? [/bin/mkdir] /bin/mkdir
Where can I find your "mv" executable? [/bin/mv] /bin/mv
Where can I find your "perl" executable? [/home/david/perl/5.10.0/bin/perl] /home/david/perl/5.10.0/bin/perl
Where can I find your "rm" executable? [/bin/rm] /bin/rm
Where can I find your "rsync" executable? [/usr/bin/rsync] /usr/bin/rsync
Where can I find your "ssh" executable? [/usr/bin/ssh] /usr/bin/ssh
Where can I find your "yapp" executable? [none] none
Can't create parsers without "yapp"
------------------------------
PREREQUISITES
------------------------------
Prerequisite modules loaded:
No requirements found
------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------
Environment variables:
AUTOMATED_TESTING = 1
LANG = en_US.UTF-8
LD_LIBRARY_PATH = /home/david/opt/subversion/lib
PATH = .:/home/david/bin:/home/david/git/utility-scripts:/home/david/perl/current/bin:.:/home/david/bin:/home/david/git/utility-scripts:/home/david/perl/current/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games
PERL5LIB = /home/david/perl/5.10.0/lib/5.10.0
PERL5OPT = -MCPAN::PERL5INC=yaml_module,YAML::Syck,tempfile,/tmp/cpan_perl5inc_rWpo.txt
PERL5_CPANPLUS_IS_RUNNING = 1697
PERL5_CPAN_IS_EXECUTING = /home/david/.cpan/build/yagg-1.4001-Y0ZvzB/Makefile.PL
PERL5_CPAN_IS_RUNNING = 1697
PERL5_CPAN_IS_RUNNING_IN_RECURSION = 4440,1697
PERL_CR_SMOKER_CURRENT = yagg-1.4001
PERL_MM_USE_DEFAULT = 1
SHELL = /bin/bash
TERM = screen
Perl special variables (and OS-specific diagnostics, for MSWin32):
$^X = /home/david/perl/5.10.0/bin/perl
$UID/$EUID = 1000 / 1000
$GID = 1000 4 20 24 25 29 30 44 46 107 115 116 1000
$EGID = 1000 4 20 24 25 29 30 44 46 107 115 116 1000
Perl module toolchain versions installed:
Module Have
------------------- ---------
CPAN 1.92_62
Cwd 3.2701
ExtUtils::CBuilder 0.23
ExtUtils::Command 1.13
ExtUtils::Install 1.45
ExtUtils::MakeMaker 6.44
ExtUtils::Manifest 1.51_01
ExtUtils::ParseXS 2.18_02
File::Spec 3.2701
Module::Build 0.2808_01
Module::Signature n/a
Test::Harness 3.10
Test::More 0.80
YAML 0.66
YAML::Syck 1.04
version 0.74
--
Summary of my perl5 (revision 5 version 10 subversion 0) configuration:
Platform:
osname=linux, osvers=2.6.24-16-generic, archname=i686-linux-64int-ld
uname='linux griffon 2.6.24-16-generic #1 smp thu apr 10 13:23:42 utc 2008 i686 gnulinux '
config_args='-de -Uversiononly -Dusedevel -Dusemorebits -Dprefix=/home/david/perl/5.10.0 -Dmydomain=.hyperbolic.net -Dcf_email=dagolden@cpan.org -Dperladmin=dagolden@cpan.org -Dcc=gcc'
hint=recommended, useposix=true, d_sigaction=define
useithreads=undef, usemultiplicity=undef
useperlio=define, d_sfio=undef, uselargefiles=define, usesocks=undef
use64bitint=define, use64bitall=undef, uselongdouble=define
usemymalloc=n, bincompat5005=undef
Compiler:
cc='gcc', ccflags ='-fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64',
optimize='-O2',
cppflags='-fno-strict-aliasing -pipe -I/usr/local/include'
ccversion='', gccversion='4.2.3 (Ubuntu 4.2.3-2ubuntu7)', gccosandvers=''
intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=12345678
d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=12
ivtype='long long', ivsize=8, nvtype='long double', nvsize=12, Off_t='off_t', lseeksize=8
alignbytes=4, prototype=define
Linker and Libraries:
ld='gcc', ldflags =' -L/usr/local/lib'
libpth=/usr/local/lib /lib /usr/lib
libs=-lnsl -ldl -lm -lcrypt -lutil -lc
perllibs=-lnsl -ldl -lm -lcrypt -lutil -lc
libc=/lib/libc-2.7.so, so=so, useshrplib=false, libperl=libperl.a
gnulibc_version='2.7'
Dynamic Linking:
dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E'
cccdlflags='-fPIC', lddlflags='-shared -O2 -L/usr/local/lib'
Thread Next