Front page | perl.cpan.testers |
Postings from June 2008
FAIL Stem-0.11 i686-linux-64int-ld 2.6.24-16-generic
Thread Previous
|
Thread Next
From:
DAGOLDEN
Date:
June 2, 2008 19:24
Subject:
FAIL Stem-0.11 i686-linux-64int-ld 2.6.24-16-generic
This distribution has been tested as part of the cpan-testers
effort to test as many new uploads to CPAN as possible. See
http://testers.cpan.org/
--
Dear Uri Guttman,
This is a computer-generated report for Stem-0.11
on perl 5.10.0, created by CPAN-Reporter-1.15.
Thank you for uploading your work to CPAN. However, there was a problem
testing your distribution.
If you think this report is invalid, please consult the CPAN Testers Wiki
for suggestions on how to avoid getting FAIL reports for missing library
or binary dependencies, unsupported operating systems, and so on:
http://cpantest.grango.org/wiki/CPANAuthorNotes
Sections of this report:
* Tester comments
* Program output
* Prerequisites
* Environment and other context
------------------------------
TESTER COMMENTS
------------------------------
Additional comments from tester:
this report is from an automated smoke testing program
and was not reviewed by a human for accuracy
------------------------------
PROGRAM OUTPUT
------------------------------
Output from './Build':
Building Stem
This script will ask you various questions in order to properly
configure, build and install Stem on your system. Whenever a question
is asked, the default answer will be shown inside [brackets].
Pressing enter will accept the default answer. If a choice needs to be
made from a list of values, that list will be inside (parentheses).
If you have already configured Stem in a previous build, you can put
use_defaults=1 on the Build command line and you won't be prompted for
any answers and the previous settings will be used.
If you want to force a new build, run Build clean.
Stem configuration files are used to create and initialize Stem Cells
(objects). Stem needs to know the list of directories to search to
find its configurations files.
Note that the default has a single absolute path. You can test Stem
configurations easily setting this path when executing run_stem. You
can override or modify the path time with either a shell environment
variable or on the command line of run_stem. See the documentation on
run_stem for how so do this.
The first directory in the list is where the standard Stem
configuration files will be installed.
Enter a list of absolute directory paths separated by ':'.
What directories do you want to search for Stem configuration files?
[/usr/local/stem/conf ]/usr/local/stem/conf
xterm was not found on this system. you can't run the demo programs
without xterm. Make sure you enter a valid path to xterm or some other
terminal emulator.
NOTE: If you don't have an xterm, you can still run the demo scripts
by hand. Run a *_demo script and see what commands it issues. Take the
part after the -e and run that command in its own terminal window.
Enter the path to xterm (or another compatible terminal emulator) []
Use of uninitialized value $defaults{"xterm_path"} in -x at BuildStem.pm line 485.
can't create blib/bin/run_stem Permission denied at ./Build line 57
telnet was found at '/usr/bin/telnet'
Copying lib/Stem/TtySock.pm -> blib/lib/Stem/TtySock.pm
Copying lib/Stem/Proc.pm -> blib/lib/Stem/Proc.pm
Copying lib/Stem/Console.pm -> blib/lib/Stem/Console.pm
Copying lib/Stem/Cell/Clone.pm -> blib/lib/Stem/Cell/Clone.pm
Copying lib/Stem/Event/Queue.pm -> blib/lib/Stem/Event/Queue.pm
Copying lib/Stem/Log.pm -> blib/lib/Stem/Log.pm
Copying lib/Stem/Portal.pm -> blib/lib/Stem/Portal.pm
Copying lib/Stem/Id.pm -> blib/lib/Stem/Id.pm
Copying lib/Stem/Test/Flow.pm -> blib/lib/Stem/Test/Flow.pm
Copying lib/Stem/Event/Wx.pm -> blib/lib/Stem/Event/Wx.pm
Copying lib/Stem/Cell/Pipe.pm -> blib/lib/Stem/Cell/Pipe.pm
Copying lib/Stem/Log/File.pm -> blib/lib/Stem/Log/File.pm
Copying lib/Stem/Test/Echo.pm -> blib/lib/Stem/Test/Echo.pm
Copying lib/Stem/Packet.pm -> blib/lib/Stem/Packet.pm
Copying lib/Stem/Socket.pm -> blib/lib/Stem/Socket.pm
Copying lib/Stem/Route.pm -> blib/lib/Stem/Route.pm
Copying lib/Stem/Cron.pm -> blib/lib/Stem/Cron.pm
Copying lib/Stem/Event/Tk.pm -> blib/lib/Stem/Event/Tk.pm
Copying lib/Stem/Trace.pm -> blib/lib/Stem/Trace.pm
Copying lib/Stem/Codec.pm -> blib/lib/Stem/Codec.pm
Copying lib/Stem/UDPMsg.pm -> blib/lib/Stem/UDPMsg.pm
Copying lib/Stem/Event/EventPM.pm -> blib/lib/Stem/Event/EventPM.pm
Copying lib/Stem/Event.pm -> blib/lib/Stem/Event.pm
Copying lib/Stem/Hub.pm -> blib/lib/Stem/Hub.pm
Copying lib/Stem/Cell/Flow.pm -> blib/lib/Stem/Cell/Flow.pm
Copying lib/Stem/Log/Entry.pm -> blib/lib/Stem/Log/Entry.pm
Copying lib/Stem/Conf.pm -> blib/lib/Stem/Conf.pm
Copying lib/Stem/Test/ConfTypes.pm -> blib/lib/Stem/Test/ConfTypes.pm
Copying lib/Stem/Event/Signal.pm -> blib/lib/Stem/Event/Signal.pm
Copying lib/Stem/InstallConfig.pm -> blib/lib/Stem/InstallConfig.pm
Copying lib/Stem/Log/Tail.pm -> blib/lib/Stem/Log/Tail.pm
Copying lib/Stem/Class.pm -> blib/lib/Stem/Class.pm
Copying lib/Stem/Load/Driver.pm -> blib/lib/Stem/Load/Driver.pm
Copying lib/Stem/Cell.pm -> blib/lib/Stem/Cell.pm
Copying lib/Stem/Msg.pm -> blib/lib/Stem/Msg.pm
Copying lib/Stem/Cell/Work.pm -> blib/lib/Stem/Cell/Work.pm
Copying lib/Stem/Test/UDP.pm -> blib/lib/Stem/Test/UDP.pm
Copying lib/Stem/ChatLabel.pm -> blib/lib/Stem/ChatLabel.pm
Copying lib/Stem/Demo/World.pm -> blib/lib/Stem/Demo/World.pm
Copying lib/Stem/Test/PacketIO.pm -> blib/lib/Stem/Test/PacketIO.pm
Copying lib/Stem/SockMsg.pm -> blib/lib/Stem/SockMsg.pm
Copying lib/Stem/Boot.pm -> blib/lib/Stem/Boot.pm
Copying lib/Stem/Load/Ticker.pm -> blib/lib/Stem/Load/Ticker.pm
Copying lib/Stem/Event/Perl.pm -> blib/lib/Stem/Event/Perl.pm
Copying lib/Stem/Codec/YAML.pm -> blib/lib/Stem/Codec/YAML.pm
Copying lib/Stem/Vars.pm -> blib/lib/Stem/Vars.pm
Copying lib/Stem/AsyncIO.pm -> blib/lib/Stem/AsyncIO.pm
Copying lib/Stem/Util.pm -> blib/lib/Stem/Util.pm
Copying lib/Stem/File.pm -> blib/lib/Stem/File.pm
Copying lib/Stem/Codec/Storable.pm -> blib/lib/Stem/Codec/Storable.pm
Copying lib/Stem/Demo/CLI.pm -> blib/lib/Stem/Demo/CLI.pm
Copying lib/Stem/Gather.pm -> blib/lib/Stem/Gather.pm
Copying lib/Stem/Codec/Data/Dumper.pm -> blib/lib/Stem/Codec/Data/Dumper.pm
Copying lib/Stem/DBI.pm -> blib/lib/Stem/DBI.pm
Copying lib/Stem/Inject.pm -> blib/lib/Stem/Inject.pm
Copying lib/Stem/WorkQueue.pm -> blib/lib/Stem/WorkQueue.pm
Copying lib/Stem/Switch.pm -> blib/lib/Stem/Switch.pm
Copying lib/Stem/Debug.pm -> blib/lib/Stem/Debug.pm
Copying lib/Stem.pm -> blib/lib/Stem.pm
Copying lib/Stem/Cell/Sequence.pm -> blib/lib/Stem/Cell/Sequence.pm
Copying bin/run_stem -> blib/bin/run_stem
------------------------------
PREREQUISITES
------------------------------
Prerequisite modules loaded:
No requirements found
------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------
Environment variables:
AUTOMATED_TESTING = 1
LANG = en_US.UTF-8
LD_LIBRARY_PATH = /home/david/opt/subversion/lib
PATH = .:/home/david/bin:/home/david/git/utility-scripts:/home/david/perl/current/bin:.:/home/david/bin:/home/david/git/utility-scripts:/home/david/perl/current/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games
PERL5LIB = /home/david/perl/5.10.0/lib/5.10.0
PERL5OPT = -MCPAN::PERL5INC=yaml_module,YAML::Syck,tempfile,/tmp/cpan_perl5inc_u6Ut.txt
PERL5_CPANPLUS_IS_RUNNING = 14328
PERL5_CPAN_IS_RUNNING = 14328
PERL5_CPAN_IS_RUNNING_IN_RECURSION = 4440,14328
PERL_CR_SMOKER_CURRENT = Stem-0.11
PERL_MM_USE_DEFAULT = 1
SHELL = /bin/bash
TERM = screen
Perl special variables (and OS-specific diagnostics, for MSWin32):
$^X = /home/david/perl/5.10.0/bin/perl
$UID/$EUID = 1000 / 1000
$GID = 1000 4 20 24 25 29 30 44 46 107 115 116 1000
$EGID = 1000 4 20 24 25 29 30 44 46 107 115 116 1000
Perl module toolchain versions installed:
Module Have
------------------- ---------
CPAN 1.92_62
Cwd 3.2701
ExtUtils::CBuilder 0.23
ExtUtils::Command 1.13
ExtUtils::Install 1.45
ExtUtils::MakeMaker 6.44
ExtUtils::Manifest 1.51_01
ExtUtils::ParseXS 2.18_02
File::Spec 3.2701
Module::Build 0.2808_01
Module::Signature n/a
Test::Harness 3.10
Test::More 0.80
YAML 0.66
YAML::Syck 1.04
version 0.74
--
Summary of my perl5 (revision 5 version 10 subversion 0) configuration:
Platform:
osname=linux, osvers=2.6.24-16-generic, archname=i686-linux-64int-ld
uname='linux griffon 2.6.24-16-generic #1 smp thu apr 10 13:23:42 utc 2008 i686 gnulinux '
config_args='-de -Uversiononly -Dusedevel -Dusemorebits -Dprefix=/home/david/perl/5.10.0 -Dmydomain=.hyperbolic.net -Dcf_email=dagolden@cpan.org -Dperladmin=dagolden@cpan.org -Dcc=gcc'
hint=recommended, useposix=true, d_sigaction=define
useithreads=undef, usemultiplicity=undef
useperlio=define, d_sfio=undef, uselargefiles=define, usesocks=undef
use64bitint=define, use64bitall=undef, uselongdouble=define
usemymalloc=n, bincompat5005=undef
Compiler:
cc='gcc', ccflags ='-fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64',
optimize='-O2',
cppflags='-fno-strict-aliasing -pipe -I/usr/local/include'
ccversion='', gccversion='4.2.3 (Ubuntu 4.2.3-2ubuntu7)', gccosandvers=''
intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=12345678
d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=12
ivtype='long long', ivsize=8, nvtype='long double', nvsize=12, Off_t='off_t', lseeksize=8
alignbytes=4, prototype=define
Linker and Libraries:
ld='gcc', ldflags =' -L/usr/local/lib'
libpth=/usr/local/lib /lib /usr/lib
libs=-lnsl -ldl -lm -lcrypt -lutil -lc
perllibs=-lnsl -ldl -lm -lcrypt -lutil -lc
libc=/lib/libc-2.7.so, so=so, useshrplib=false, libperl=libperl.a
gnulibc_version='2.7'
Dynamic Linking:
dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E'
cccdlflags='-fPIC', lddlflags='-shared -O2 -L/usr/local/lib'
Thread Previous
|
Thread Next