develooper Front page | perl.cpan.testers | Postings from June 2008

NA URI-http-Dump-0.03 i86pc-solaris-thread-multi-64int 2.10

Thread Previous
From:
chris
Date:
June 5, 2008 21:00
Subject:
NA URI-http-Dump-0.03 i86pc-solaris-thread-multi-64int 2.10
This distribution has been tested as part of the cpan-testers
effort to test as many new uploads to CPAN as possible.  See
http://testers.cpan.org/


--
Dear Evan Carroll,
    
This is a computer-generated report for URI-http-Dump-0.03
on perl 5.8.8, created by CPAN-Reporter-1.15. 

Thank you for uploading your work to CPAN.  While attempting to build or test 
this distribution, the distribution signaled that support is not available 
either for this operating system or this version of Perl.  Nevertheless, any 
diagnostic output produced is provided below for reference.  If this is not 
what you expect, you may wish to consult the CPAN Testers Wiki:

http://cpantest.grango.org/wiki/CPANAuthorNotes

Sections of this report:

    * Tester comments
    * Program output
    * Prerequisites
    * Environment and other context

------------------------------
TESTER COMMENTS
------------------------------

Additional comments from tester: 

this report is from an automated smoke testing program
and was not reviewed by a human for accuracy

------------------------------
PROGRAM OUTPUT
------------------------------

Output from '/export/home/cpan/pit/rel/perl5.8.8/bin/perl Makefile.PL':

Cannot determine perl version info from lib/URI/http/Dump.pm
*** Module::AutoInstall version 1.03
*** Checking for Perl dependencies...
[Core Features]
- Test::More        ...loaded. (0.62)
- mro               ...missing.
- URI::http         ...missing.
- Moose             ...missing.
- MooseX::InsideOut ...missing.
- YAML              ...missing.
==> Auto-install the 5 mandatory module(s) from CPAN? [Y/n] y

*** Since we're running under CPANPLUS, I'll just let it take care
    of the dependency's installation later.
*** Module::AutoInstall configuration finished.
ERROR: perl: Version 5.008008 is installed, but we need version >= 5.010 at inc/Module/Install/Makefile.pm line 166.
# Looks like your test died before it could output anything.

------------------------------
PREREQUISITES
------------------------------

Prerequisite modules loaded:

    No requirements found

------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------

Environment variables:

    AUTOMATED_TESTING = 1
    LC_COLLATE = en_GB.UTF-8
    LC_CTYPE = en_GB.UTF-8
    LC_MESSAGES = C
    LC_MONETARY = en_GB.UTF-8
    LC_NUMERIC = en_GB.UTF-8
    LC_TIME = en_GB.UTF-8
    PATH = /opt/SUNWspro/bin:/usr/ccs/bin:/usr/local/bin:/usr/local/sbin:/usr/bin::/usr/sfw/bin
    PERL5LIB = 
    PERL5OPT = 
    PERL5_CPANPLUS_IS_RUNNING = 29405
    PERL5_CPAN_IS_EXECUTING = /export/home/cpan/pit/rel/perl5.8.8/.cpan/build/URI-http-Dump-0.03-0_Nrj9/Makefile.PL
    PERL5_CPAN_IS_RUNNING = 29405
    PERL5_CPAN_IS_RUNNING_IN_RECURSION = 4262,29405
    PERL_CPAN_REPORTER_DIR = /export/home/cpan/pit/rel/perl5.8.8/.cpanreporter
    PERL_CR_SMOKER_CURRENT = URI-http-Dump-0.03
    PERL_MM_USE_DEFAULT = 1
    SHELL = /usr/bin/bash
    TERM = vt100

Perl special variables (and OS-specific diagnostics, for MSWin32):

    $^X = /export/home/cpan/pit/rel/perl5.8.8/bin/perl
    $UID/$EUID = 100 / 100
    $GID = 100 100
    $EGID = 100 100

Perl module toolchain versions installed:

    Module              Have   
    ------------------- -------
    CPAN                1.92_62
    Cwd                 3.2701 
    ExtUtils::CBuilder  0.23   
    ExtUtils::Command   1.13   
    ExtUtils::Install   1.45   
    ExtUtils::MakeMaker 6.44   
    ExtUtils::Manifest  1.51   
    ExtUtils::ParseXS   2.19   
    File::Spec          3.2701 
    Module::Build       0.2808 
    Module::Signature   n/a    
    Test::Harness       3.10   
    Test::More          0.62   
    YAML                n/a    
    YAML::Syck          n/a    
    version             n/a    


--

Summary of my perl5 (revision 5 version 8 subversion 8) configuration:
  Platform:
    osname=solaris, osvers=2.10, archname=i86pc-solaris-thread-multi-64int
    uname='sunos solarity 5.10 generic_118855-33 i86pc i386 i86pc '
    config_args='-e -Dprefix=/export/home/cpan/pit/rel/perl5.8.8 -Dusethreads -Duse64bitint'
    hint=recommended, useposix=true, d_sigaction=define
    usethreads=define use5005threads=undef useithreads=define usemultiplicity=define
    useperlio=define d_sfio=undef uselargefiles=define usesocks=undef
    use64bitint=define use64bitall=undef uselongdouble=undef
    usemymalloc=n, bincompat5005=undef
  Compiler:
    cc='/opt/SUNWspro/bin/cc', ccflags ='-D_REENTRANT -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -DPERL_USE_SAFE_PUTENV -DPERL_USE_SAFE_PUTENV',
    optimize='-O',
    cppflags='-D_REENTRANT -I/usr/local/include'
    ccversion='Sun C 5.8 2005/10/13', gccversion='', gccosandvers=''
    intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=12345678
    d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=12
    ivtype='long long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8
    alignbytes=4, prototype=define
  Linker and Libraries:
    ld='/opt/SUNWspro/bin/cc', ldflags =' -L/usr/lib -L/usr/ccs/lib -L/opt/SUNWspro/prod/lib -L/lib -L/usr/local/lib '
    libpth=/usr/lib /usr/ccs/lib /opt/SUNWspro/prod/lib /lib /usr/local/lib
    libs=-lsocket -lnsl -ldl -lm -lpthread -lc
    perllibs=-lsocket -lnsl -ldl -lm -lpthread -lc
    libc=/lib/libc.so, so=so, useshrplib=false, libperl=libperl.a
    gnulibc_version=''
  Dynamic Linking:
    dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags=' '

Thread Previous


Comments to Ask Bjørn Hansen at ask@perl.org | Group listing | About