Front page | perl.cpan.testers |
Postings from June 2008
FAIL CAS-0.89 darwin-2level 7.9.0
From:
JJ
Date:
June 6, 2008 11:55
Subject:
FAIL CAS-0.89 darwin-2level 7.9.0
This distribution has been tested as part of the cpan-testers
effort to test as many new uploads to CPAN as possible. See
http://testers.cpan.org/
--
Dear Sean P. Quinlan,
This is a computer-generated report for CAS-0.89
on perl 5.8.1, created by CPAN-Reporter-1.15.
Thank you for uploading your work to CPAN. However, there was a problem
testing your distribution.
If you think this report is invalid, please consult the CPAN Testers Wiki
for suggestions on how to avoid getting FAIL reports for missing library
or binary dependencies, unsupported operating systems, and so on:
http://cpantest.grango.org/wiki/CPANAuthorNotes
Sections of this report:
* Tester comments
* Program output
* Prerequisites
* Environment and other context
------------------------------
TESTER COMMENTS
------------------------------
Additional comments from tester:
this report is from an automated smoke testing program
and was not reviewed by a human for accuracy
------------------------------
PROGRAM OUTPUT
------------------------------
Output from '/usr/bin/make test':
PERL_DL_NONLAZY=1 /Users/jj/perl/perl-5.8.1/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
t/00-load................ok
t/01-database............Problem connecting to database: install_driver(mysql) failed: Can't locate DBD/mysql.pm in @INC (@INC contains: /Users/jj/perl/perl-5.8.1/cpan/build/CAS-0.89-flBibI/blib/lib /Users/jj/perl/perl-5.8.1/cpan/build/CAS-0.89-flBibI/blib/arch /Users/jj/perl/perl-5.8.1/cpan/build/CAS-0.89-flBibI/blib/lib /Users/jj/perl/perl-5.8.1/cpan/build/CAS-0.89-flBibI/blib/arch /Users/jj/perl/perl-5.8.1/cpan/build/Mail-Sendmail-0.79-OfY9Mg/blib/arch /Users/jj/perl/perl-5.8.1/cpan/build/Mail-Sendmail-0.79-OfY9Mg/blib/lib /Users/jj/perl/perl-5.8.1/cpan/build/DBI-1.604-Efl1Sg/blib/arch /Users/jj/perl/perl-5.8.1/cpan/build/DBI-1.604-Efl1Sg/blib/lib /Users/jj/perl/perl-5.8.1/lib/5.8.1/darwin-2level /Users/jj/perl/perl-5.8.1/lib/5.8.1 /Users/jj/perl/perl-5.8.1/lib/site_perl/5.8.1/darwin-2level /Users/jj/perl/perl-5.8.1/lib/site_perl/5.8.1 /Users/jj/perl/perl-5.8.1/lib/site_perl) at (eval 33) line 3.
Perhaps the DBD::mysql perl module hasn't been fully installed,
or perhaps the capitalisation of 'mysql' isn't right.
Available drivers: DBM, ExampleP, File, Gofer, Proxy, Sponge.
at /Users/jj/perl/perl-5.8.1/cpan/build/CAS-0.89-flBibI/blib/lib/CAS/DB.pm line 103
# Looks like your test died before it could output anything.
Dubious, test returned 255 (wstat 65280, 0xff00)
Failed 3/3 subtests
t/02-client..............Problem connecting to database: install_driver(mysql) failed: Can't locate DBD/mysql.pm in @INC (@INC contains: /Users/jj/perl/perl-5.8.1/cpan/build/CAS-0.89-flBibI/blib/lib /Users/jj/perl/perl-5.8.1/cpan/build/CAS-0.89-flBibI/blib/arch /Users/jj/perl/perl-5.8.1/cpan/build/CAS-0.89-flBibI/blib/lib /Users/jj/perl/perl-5.8.1/cpan/build/CAS-0.89-flBibI/blib/arch /Users/jj/perl/perl-5.8.1/cpan/build/Mail-Sendmail-0.79-OfY9Mg/blib/arch /Users/jj/perl/perl-5.8.1/cpan/build/Mail-Sendmail-0.79-OfY9Mg/blib/lib /Users/jj/perl/perl-5.8.1/cpan/build/DBI-1.604-Efl1Sg/blib/arch /Users/jj/perl/perl-5.8.1/cpan/build/DBI-1.604-Efl1Sg/blib/lib /Users/jj/perl/perl-5.8.1/lib/5.8.1/darwin-2level /Users/jj/perl/perl-5.8.1/lib/5.8.1 /Users/jj/perl/perl-5.8.1/lib/site_perl/5.8.1/darwin-2level /Users/jj/perl/perl-5.8.1/lib/site_perl/5.8.1 /Users/jj/perl/perl-5.8.1/lib/site_perl) at (eval 41) line 3.
Perhaps the DBD::mysql perl module hasn't been fully installed,
or perhaps the capitalisation of 'mysql' isn't right.
Available drivers: DBM, ExampleP, File, Gofer, Proxy, Sponge.
at /Users/jj/perl/perl-5.8.1/cpan/build/CAS-0.89-flBibI/blib/lib/CAS/DB.pm line 103
# Looks like you planned 7 tests but only ran 3.
# Looks like your test died just after 3.
Dubious, test returned 255 (wstat 65280, 0xff00)
Failed 4/7 subtests
t/03-user................Problem connecting to database: install_driver(mysql) failed: Can't locate DBD/mysql.pm in @INC (@INC contains: /Users/jj/perl/perl-5.8.1/cpan/build/CAS-0.89-flBibI/blib/lib /Users/jj/perl/perl-5.8.1/cpan/build/CAS-0.89-flBibI/blib/arch /Users/jj/perl/perl-5.8.1/cpan/build/CAS-0.89-flBibI/blib/lib /Users/jj/perl/perl-5.8.1/cpan/build/CAS-0.89-flBibI/blib/arch /Users/jj/perl/perl-5.8.1/cpan/build/Mail-Sendmail-0.79-OfY9Mg/blib/arch /Users/jj/perl/perl-5.8.1/cpan/build/Mail-Sendmail-0.79-OfY9Mg/blib/lib /Users/jj/perl/perl-5.8.1/cpan/build/DBI-1.604-Efl1Sg/blib/arch /Users/jj/perl/perl-5.8.1/cpan/build/DBI-1.604-Efl1Sg/blib/lib /Users/jj/perl/perl-5.8.1/lib/5.8.1/darwin-2level /Users/jj/perl/perl-5.8.1/lib/5.8.1 /Users/jj/perl/perl-5.8.1/lib/site_perl/5.8.1/darwin-2level /Users/jj/perl/perl-5.8.1/lib/site_perl/5.8.1 /Users/jj/perl/perl-5.8.1/lib/site_perl) at (eval 34) line 3.
Perhaps the DBD::mysql perl module hasn't been fully installed,
or perhaps the capitalisation of 'mysql' isn't right.
Available drivers: DBM, ExampleP, File, Gofer, Proxy, Sponge.
at /Users/jj/perl/perl-5.8.1/cpan/build/CAS-0.89-flBibI/blib/lib/CAS/DB.pm line 103
# Looks like your test died before it could output anything.
Dubious, test returned 255 (wstat 65280, 0xff00)
Failed 20/20 subtests
t/04-authentication......Problem connecting to database: install_driver(mysql) failed: Can't locate DBD/mysql.pm in @INC (@INC contains: /Users/jj/perl/perl-5.8.1/cpan/build/CAS-0.89-flBibI/blib/lib /Users/jj/perl/perl-5.8.1/cpan/build/CAS-0.89-flBibI/blib/arch /Users/jj/perl/perl-5.8.1/cpan/build/CAS-0.89-flBibI/blib/lib /Users/jj/perl/perl-5.8.1/cpan/build/CAS-0.89-flBibI/blib/arch /Users/jj/perl/perl-5.8.1/cpan/build/Mail-Sendmail-0.79-OfY9Mg/blib/arch /Users/jj/perl/perl-5.8.1/cpan/build/Mail-Sendmail-0.79-OfY9Mg/blib/lib /Users/jj/perl/perl-5.8.1/cpan/build/DBI-1.604-Efl1Sg/blib/arch /Users/jj/perl/perl-5.8.1/cpan/build/DBI-1.604-Efl1Sg/blib/lib /Users/jj/perl/perl-5.8.1/lib/5.8.1/darwin-2level /Users/jj/perl/perl-5.8.1/lib/5.8.1 /Users/jj/perl/perl-5.8.1/lib/site_perl/5.8.1/darwin-2level /Users/jj/perl/perl-5.8.1/lib/site_perl/5.8.1 /Users/jj/perl/perl-5.8.1/lib/site_perl) at (eval 34) line 3.
Perhaps the DBD::mysql perl module hasn't been fully installed,
or perhaps the capitalisation of 'mysql' isn't right.
Available drivers: DBM, ExampleP, File, Gofer, Proxy, Sponge.
at /Users/jj/perl/perl-5.8.1/cpan/build/CAS-0.89-flBibI/blib/lib/CAS/DB.pm line 103
# Looks like your test died before it could output anything.
Dubious, test returned 255 (wstat 65280, 0xff00)
Failed 7/7 subtests
t/05-authorization.......Problem connecting to database: install_driver(mysql) failed: Can't locate DBD/mysql.pm in @INC (@INC contains: /Users/jj/perl/perl-5.8.1/cpan/build/CAS-0.89-flBibI/blib/lib /Users/jj/perl/perl-5.8.1/cpan/build/CAS-0.89-flBibI/blib/arch /Users/jj/perl/perl-5.8.1/cpan/build/CAS-0.89-flBibI/blib/lib /Users/jj/perl/perl-5.8.1/cpan/build/CAS-0.89-flBibI/blib/arch /Users/jj/perl/perl-5.8.1/cpan/build/Mail-Sendmail-0.79-OfY9Mg/blib/arch /Users/jj/perl/perl-5.8.1/cpan/build/Mail-Sendmail-0.79-OfY9Mg/blib/lib /Users/jj/perl/perl-5.8.1/cpan/build/DBI-1.604-Efl1Sg/blib/arch /Users/jj/perl/perl-5.8.1/cpan/build/DBI-1.604-Efl1Sg/blib/lib /Users/jj/perl/perl-5.8.1/lib/5.8.1/darwin-2level /Users/jj/perl/perl-5.8.1/lib/5.8.1 /Users/jj/perl/perl-5.8.1/lib/site_perl/5.8.1/darwin-2level /Users/jj/perl/perl-5.8.1/lib/site_perl/5.8.1 /Users/jj/perl/perl-5.8.1/lib/site_perl) at (eval 34) line 3.
Perhaps the DBD::mysql perl module hasn't been fully installed,
or perhaps the capitalisation of 'mysql' isn't right.
Available drivers: DBM, ExampleP, File, Gofer, Proxy, Sponge.
at /Users/jj/perl/perl-5.8.1/cpan/build/CAS-0.89-flBibI/blib/lib/CAS/DB.pm line 103
# Looks like your test died before it could output anything.
Dubious, test returned 255 (wstat 65280, 0xff00)
Failed 28/28 subtests
t/06-administration......skipped: Admin methodology not settled yet
t/boilerplate............couldn't open Changes for reading: No such file or directory at t/boilerplate.t line 9.
# Looks like you planned 6 tests but only ran 1.
# Looks like your test died just after 1.
Dubious, test returned 255 (wstat 65280, 0xff00)
Failed 5/6 subtests
t/pod-coverage...........
# Failed test 'Pod coverage on CAS::Config'
# at /Users/jj/perl/perl-5.8.1/lib/site_perl/5.8.1/Test/Pod/Coverage.pm line 126.
# Coverage for CAS::Config is 0.0%, with 2 naked subroutines:
# cas_db_connect
# load
# Failed test 'Pod coverage on CAS::DB'
# at /Users/jj/perl/perl-5.8.1/lib/site_perl/5.8.1/Test/Pod/Coverage.pm line 126.
# Coverage for CAS::DB is 66.7%, with 2 naked subroutines:
# err
# errstr
# Failed test 'Pod coverage on CAS::Messaging'
# at /Users/jj/perl/perl-5.8.1/lib/site_perl/5.8.1/Test/Pod/Coverage.pm line 126.
# Coverage for CAS::Messaging is 57.1%, with 3 naked subroutines:
# code_value
# response_code
# response_is
# Failed test 'Pod coverage on CAS::User'
# at /Users/jj/perl/perl-5.8.1/lib/site_perl/5.8.1/Test/Pod/Coverage.pm line 126.
# Coverage for CAS::User is 30.0%, with 14 naked subroutines:
# crypt_pass
# new_user_email
# validate_Address1
# validate_Address2
# validate_City
# validate_Country
# validate_Email
# validate_Firstname
# validate_Lastname
# validate_Password
# validate_Phone
# validate_State
# validate_Username
# validate_Zip
# Looks like you failed 4 tests of 5.
Dubious, test returned 4 (wstat 1024, 0x400)
Failed 4/5 subtests
t/pod....................ok
Test Summary Report
-------------------
t/01-database.t (Wstat: 65280 Tests: 0 Failed: 0)
Non-zero exit status: 255
Parse errors: Bad plan. You planned 3 tests but ran 0.
t/02-client.t (Wstat: 65280 Tests: 3 Failed: 0)
Non-zero exit status: 255
Parse errors: Bad plan. You planned 7 tests but ran 3.
t/03-user.t (Wstat: 65280 Tests: 0 Failed: 0)
Non-zero exit status: 255
Parse errors: Bad plan. You planned 20 tests but ran 0.
t/04-authentication.t (Wstat: 65280 Tests: 0 Failed: 0)
Non-zero exit status: 255
Parse errors: Bad plan. You planned 7 tests but ran 0.
t/05-authorization.t (Wstat: 65280 Tests: 0 Failed: 0)
Non-zero exit status: 255
Parse errors: Bad plan. You planned 28 tests but ran 0.
t/boilerplate.t (Wstat: 65280 Tests: 1 Failed: 0)
Non-zero exit status: 255
Parse errors: Bad plan. You planned 6 tests but ran 1.
t/pod-coverage.t (Wstat: 1024 Tests: 5 Failed: 4)
Failed tests: 2-5
Non-zero exit status: 4
Files=10, Tests=19, 11 wallclock secs ( 0.07 usr 0.11 sys + 2.97 cusr 0.47 csys = 3.62 CPU)
Result: FAIL
Failed 7/10 test programs. 4/19 subtests failed.
make: *** [test_dynamic] Error 255
------------------------------
PREREQUISITES
------------------------------
Prerequisite modules loaded:
requires:
Module Need Have
-------------- ---- -----
Data::Dumper 0 2.121
DBI 0 1.604
Digest::MD5 0 2.27
Mail::Sendmail 0.7 0.79
Test::More 0 0.80
YAML 0.35 0.66
------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------
Environment variables:
AUTOMATED_TESTING = 1
PATH = /Users/jj/bin:/bin:/sbin:/usr/bin:/usr/sbin
PERL5LIB = /Users/jj/perl/perl-5.8.1/cpan/build/Mail-Sendmail-0.79-OfY9Mg/blib/arch:/Users/jj/perl/perl-5.8.1/cpan/build/Mail-Sendmail-0.79-OfY9Mg/blib/lib:/Users/jj/perl/perl-5.8.1/cpan/build/DBI-1.604-Efl1Sg/blib/arch:/Users/jj/perl/perl-5.8.1/cpan/build/DBI-1.604-Efl1Sg/blib/lib
PERL5OPT =
PERL5_CPANPLUS_IS_RUNNING = 13332
PERL5_CPAN_IS_RUNNING = 13332
PERL5_CPAN_IS_RUNNING_IN_RECURSION = 551,13332
PERL_CR_SMOKER_CURRENT = CAS-0.89
PERL_MM_USE_DEFAULT = 1
SHELL = /bin/bash
TERM = xterm-color
Perl special variables (and OS-specific diagnostics, for MSWin32):
$^X = /Users/jj/perl/perl-5.8.1/bin/perl
$UID/$EUID = 501 / 501
$GID = 501 81 80 79 501
$EGID = 501 81 80 79 501
Perl module toolchain versions installed:
Module Have
------------------- -------
CPAN 1.92_62
Cwd 3.2701
ExtUtils::CBuilder 0.23
ExtUtils::Command 1.13
ExtUtils::Install 1.45
ExtUtils::MakeMaker 6.44
ExtUtils::Manifest 1.51
ExtUtils::ParseXS n/a
File::Spec 3.2701
Module::Build 0.2808
Module::Signature n/a
Test::Harness 3.10
Test::More 0.80
YAML 0.66
YAML::Syck 1.04
version 0.74
--
Summary of my perl5 (revision 5.0 version 8 subversion 1) configuration:
Platform:
osname=darwin, osvers=7.9.0, archname=darwin-2level
uname='darwin peladon.local 7.9.0 darwin kernel version 7.9.0: wed mar 30 20:11:17 pst 2005; root:xnuxnu-517.12.7.obj~1release_ppc power macintosh powerpc '
config_args='-de -Dprefix=/Users/jj/perl/perl-5.8.1'
hint=recommended, useposix=true, d_sigaction=define
usethreads=undef use5005threads=undef useithreads=undef usemultiplicity=undef
useperlio=define d_sfio=undef uselargefiles=define usesocks=undef
use64bitint=undef use64bitall=undef uselongdouble=undef
usemymalloc=n, bincompat5005=undef
Compiler:
cc='cc', ccflags ='-pipe -fno-common -DPERL_DARWIN -no-cpp-precomp -fno-strict-aliasing',
optimize='-Os',
cppflags='-no-cpp-precomp -pipe -fno-common -DPERL_DARWIN -no-cpp-precomp -fno-strict-aliasing'
ccversion='', gccversion='3.3 20030304 (Apple Computer, Inc. build 1666)', gccosandvers=''
intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=4321
d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=8
ivtype='long', ivsize=4, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8
alignbytes=8, prototype=define
Linker and Libraries:
ld='MACOSX_DEPLOYMENT_TARGET=10.3 cc', ldflags =''
libpth=/usr/lib
libs=-ldbm -ldl -lm -lc
perllibs=-ldl -lm -lc
libc=/usr/lib/libc.dylib, so=dylib, useshrplib=false, libperl=libperl.a
gnulibc_version=''
Dynamic Linking:
dlsrc=dl_dyld.xs, dlext=bundle, d_dlsymun=undef, ccdlflags=' '
cccdlflags=' ', lddlflags=' -bundle -undefined dynamic_lookup'
-
FAIL CAS-0.89 darwin-2level 7.9.0
by JJ