Front page | perl.cpan.testers |
Postings from June 2008
FAIL Proc-SafeExec-1.4 i86pc-solaris-thread-multi-64int 2.10
Thread Previous
|
Thread Next
From:
chris
Date:
June 6, 2008 13:48
Subject:
FAIL Proc-SafeExec-1.4 i86pc-solaris-thread-multi-64int 2.10
This distribution has been tested as part of the cpan-testers
effort to test as many new uploads to CPAN as possible. See
http://testers.cpan.org/
--
Dear BILBO,
This is a computer-generated error report created automatically by
CPANPLUS, version 0.84. Testers personal comments may appear
at the end of this report.
Thank you for uploading your work to CPAN. However, it appears that
there were some problems testing your distribution.
TEST RESULTS:
Below is the error stack from stage 'make test':
[MSG] [Fri Jun 6 21:41:39 2008] Trying to get 'ftp://ftp.funet.fi/pub/languages/perl/CPAN/authors/id/B/BI/BILBO/Proc-SafeExec-1.4.tar.gz'
[MSG] [Fri Jun 6 21:41:41 2008] Extracted 'Proc-SafeExec-1.4'
[MSG] [Fri Jun 6 21:41:41 2008] Extracted 'Proc-SafeExec-1.4/lib'
[MSG] [Fri Jun 6 21:41:41 2008] Extracted 'Proc-SafeExec-1.4/MANIFEST'
[MSG] [Fri Jun 6 21:41:41 2008] Extracted 'Proc-SafeExec-1.4/t'
[MSG] [Fri Jun 6 21:41:41 2008] Extracted 'Proc-SafeExec-1.4/Makefile.PL'
[MSG] [Fri Jun 6 21:41:41 2008] Extracted 'Proc-SafeExec-1.4/META.yml'
[MSG] [Fri Jun 6 21:41:41 2008] Extracted 'Proc-SafeExec-1.4/t/Proc-SafeExec.t'
[MSG] [Fri Jun 6 21:41:41 2008] Extracted 'Proc-SafeExec-1.4/lib/Proc'
[MSG] [Fri Jun 6 21:41:41 2008] Extracted 'Proc-SafeExec-1.4/lib/Proc/SafeExec'
[MSG] [Fri Jun 6 21:41:41 2008] Extracted 'Proc-SafeExec-1.4/lib/Proc/SafeExec.pm'
[MSG] [Fri Jun 6 21:41:41 2008] Extracted 'Proc-SafeExec-1.4/lib/Proc/SafeExec/Queue.pm'
[MSG] [Fri Jun 6 21:41:41 2008] Extracted 'Proc::SafeExec' to '/export/home/cpan/pit/rel/perl5.6.2/.cpanplus/5.6.2/build/Proc-SafeExec-1.4'
[MSG] [Fri Jun 6 21:41:45 2008] Checking if your kit is complete...
Looks good
Writing Makefile for Proc::SafeExec
[MSG] [Fri Jun 6 21:41:45 2008] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value'
[MSG] [Fri Jun 6 21:41:49 2008] cp lib/Proc/SafeExec.pm blib/lib/Proc/SafeExec.pm
cp lib/Proc/SafeExec/Queue.pm blib/lib/Proc/SafeExec/Queue.pm
Manifying blib/man3/Proc::SafeExec.3
Manifying blib/man3/Proc::SafeExec::Queue.3
[ERROR] [Fri Jun 6 21:41:54 2008] MAKE TEST failed: Illegal seek PERL_DL_NONLAZY=1 /export/home/cpan/pit/rel/perl5.6.2/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
t/Proc-SafeExec......# Failed test 2 in t/Proc-SafeExec.t at line 18
# t/Proc-SafeExec.t line 18 is: ok(not Proc::SafeExec::test() =~ qr/(^|\n)not ok/s);
Failed 1/2 subtests
Test Summary Report
-------------------
t/Proc-SafeExec.t (Wstat: 0 Tests: 2 Failed: 1)
Failed test: 2
Files=1, Tests=2, 1 wallclock secs ( 0.05 usr 0.01 sys + 0.33 cusr 0.09 csys = 0.48 CPU)
Result: FAIL
*** Error code 11
Failed 1/1 test programs. 1/2 subtests failed.
make: Fatal error: Command failed for target `test_dynamic'
[MSG] [Fri Jun 6 21:41:55 2008] DEFAULT 'proceed_on_test_failure' HANDLER RETURNING 'sub return value'
******************************** NOTE ********************************
The comments above are created mechanically, possibly without manual
checking by the sender. As there are many people performing automatic
tests on each upload to CPAN, it is likely that you will receive
identical messages about the same problem.
If you believe that the message is mistaken, please reply to the first
one with correction and/or additional informations, and do not take
it personally. We appreciate your patience. :)
**********************************************************************
Additional comments:
This report was machine-generated by CPAN::YACSmoke 0.0307. Powered by POE::Component::CPAN::YACSmoke.
------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------
Environment variables:
AUTOMATED_TESTING = 1
LC_COLLATE = en_GB.UTF-8
LC_CTYPE = en_GB.UTF-8
LC_MESSAGES = C
LC_MONETARY = en_GB.UTF-8
LC_NUMERIC = en_GB.UTF-8
LC_TIME = en_GB.UTF-8
PATH = /opt/SUNWspro/bin:/usr/ccs/bin:/usr/local/bin:/usr/local/sbin:/usr/bin::/usr/sfw/bin:/usr/perl5/bin
PERL5LIB = :/export/home/cpan/pit/rel/perl5.6.2/.cpanplus/5.6.2/build/Proc-SafeExec-1.4/blib/lib:/export/home/cpan/pit/rel/perl5.6.2/.cpanplus/5.6.2/build/Proc-SafeExec-1.4/blib/arch:/export/home/cpan/pit/rel/perl5.6.2/.cpanplus/5.6.2/build/Proc-SafeExec-1.4/blib
PERL5_CPANPLUS_IS_EXECUTING =
PERL5_CPANPLUS_IS_RUNNING = 1986
PERL5_CPANPLUS_IS_VERSION = 0.84
PERL_MM_USE_DEFAULT = 1
SHELL = /usr/bin/bash
TERM = vt100
Perl special variables (and OS-specific diagnostics, for MSWin32):
Perl: $^X = /export/home/cpan/pit/rel/perl5.6.2/bin/perl
UID: $< = 100
EUID: $> = 100
GID: $( = 100 100
EGID: $) = 100 100
-------------------------------
--
Summary of my perl5 (revision 5.0 version 6 subversion 2) configuration:
Platform:
osname=solaris, osvers=2.10, archname=i86pc-solaris-thread-multi-64int
uname='sunos solarity 5.10 generic_118855-33 i86pc i386 i86pc '
config_args='-e -Dprefix=/export/home/cpan/pit/rel/perl5.6.2 -Dusethreads -Duse64bitint'
hint=recommended, useposix=true, d_sigaction=define
usethreads=define use5005threads=undef useithreads=define usemultiplicity=define
useperlio=undef d_sfio=undef uselargefiles=define usesocks=undef
use64bitint=define use64bitall=undef uselongdouble=undef
Compiler:
cc='/opt/SUNWspro/bin/cc', ccflags ='-D_REENTRANT -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64',
optimize='-O',
cppflags='-D_REENTRANT -I/usr/local/include'
ccversion='Sun C 5.8 2005/10/13', gccversion='', gccosandvers=''
intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=12345678
d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=12
ivtype='long long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8
alignbytes=4, usemymalloc=n, prototype=define
Linker and Libraries:
ld='/opt/SUNWspro/bin/cc', ldflags =' -L/usr/lib -L/usr/ccs/lib -L/opt/SUNWspro/prod/lib -L/lib -L/usr/local/lib '
libpth=/usr/lib /usr/ccs/lib /opt/SUNWspro/prod/lib /lib /usr/local/lib
libs=-lsocket -lnsl -ldl -lm -lpthread -lc
perllibs=-lsocket -lnsl -ldl -lm -lpthread -lc
libc=/lib/libc.so, so=so, useshrplib=false, libperl=libperl.a
Dynamic Linking:
dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags=' '
Thread Previous
|
Thread Next