develooper Front page | perl.cpan.testers | Postings from June 2008

FAIL LJ-Schedule-0.6 i686-linux-thread-multi-64int-ld 2.6.24-16-generic

From:
DAGOLDEN
Date:
June 20, 2008 16:43
Subject:
FAIL LJ-Schedule-0.6 i686-linux-thread-multi-64int-ld 2.6.24-16-generic
This distribution has been tested as part of the cpan-testers
effort to test as many new uploads to CPAN as possible.  See
http://testers.cpan.org/

Please cc any replies to cpan-testers@perl.org to keep other
test volunteers informed and to prevent any duplicate effort.

--
Dear Ben Evans,
    
This is a computer-generated report for LJ-Schedule-0.6
on perl 5.6.2, created by CPAN-Reporter-1.15. 

Thank you for uploading your work to CPAN.  However, there was a problem
testing your distribution.

If you think this report is invalid, please consult the CPAN Testers Wiki
for suggestions on how to avoid getting FAIL reports for missing library
or binary dependencies, unsupported operating systems, and so on:

http://cpantest.grango.org/wiki/CPANAuthorNotes

Sections of this report:

    * Tester comments
    * Program output
    * Prerequisites
    * Environment and other context

------------------------------
TESTER COMMENTS
------------------------------

Additional comments from tester: 

this report is from an automated smoke testing program
and was not reviewed by a human for accuracy

------------------------------
PROGRAM OUTPUT
------------------------------

Output from '/usr/bin/make test':

PERL_DL_NONLAZY=1 /home/david/bin/perl562t "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
t/00-load.t.........
#   Failed test 'use LJ::Schedule;'
#   at t/00-load.t line 6.
#     Tried to use 'LJ::Schedule'.
#     Error:  Can't locate Date/Parse.pm in @INC (@INC contains: /home/david/.cpan/build/LJ-Schedule-0.6-TMy4nf/blib/lib /home/david/.cpan/build/LJ-Schedule-0.6-TMy4nf/blib/arch /home/david/.cpan/build/LJ-Schedule-0.6-TMy4nf/blib/lib /home/david/.cpan/build/LJ-Schedule-0.6-TMy4nf/blib/arch /home/david/perl/5.6.2-threads/lib/5.6.2/i686-linux-thread-multi-64int-ld /home/david/perl/5.6.2-threads/lib/5.6.2 /home/david/perl/5.6.2-threads/lib/site_perl/5.6.2/i686-linux-thread-multi-64int-ld /home/david/perl/5.6.2-threads/lib/site_perl/5.6.2 /home/david/perl/5.6.2-threads/lib/site_perl) at /home/david/.cpan/build/LJ-Schedule-0.6-TMy4nf/blib/lib/LJ/Schedule/Vcal.pm line 6.
# BEGIN failed--compilation aborted at /home/david/.cpan/build/LJ-Schedule-0.6-TMy4nf/blib/lib/LJ/Schedule/Vcal.pm line 6.
# Compilation failed in require at /home/david/.cpan/build/LJ-Schedule-0.6-TMy4nf/blib/lib/LJ/Schedule.pm line 118.
# BEGIN failed--compilation aborted at /home/david/.cpan/build/LJ-Schedule-0.6-TMy4nf/blib/lib/LJ/Schedule.pm line 118.
# Compilation failed in require at (eval 2) line 2.
# BEGIN failed--compilation aborted at (eval 2) line 2.

#   Failed test 'use LJ::Schedule::Post;'
#   at t/00-load.t line 8.
#     Tried to use 'LJ::Schedule::Post'.
#     Error:  Can't locate LJ/Simple.pm in @INC (@INC contains: /home/david/.cpan/build/LJ-Schedule-0.6-TMy4nf/blib/lib /home/david/.cpan/build/LJ-Schedule-0.6-TMy4nf/blib/arch /home/david/.cpan/build/LJ-Schedule-0.6-TMy4nf/blib/lib /home/david/.cpan/build/LJ-Schedule-0.6-TMy4nf/blib/arch /home/david/perl/5.6.2-threads/lib/5.6.2/i686-linux-thread-multi-64int-ld /home/david/perl/5.6.2-threads/lib/5.6.2 /home/david/perl/5.6.2-threads/lib/site_perl/5.6.2/i686-linux-thread-multi-64int-ld /home/david/perl/5.6.2-threads/lib/site_perl/5.6.2 /home/david/perl/5.6.2-threads/lib/site_perl) at /home/david/.cpan/build/LJ-Schedule-0.6-TMy4nf/blib/lib/LJ/Schedule/Post/Simple.pm line 8.
# BEGIN failed--compilation aborted at /home/david/.cpan/build/LJ-Schedule-0.6-TMy4nf/blib/lib/LJ/Schedule/Post/Simple.pm line 8.
# Compilation failed in require at /home/david/.cpan/build/LJ-Schedule-0.6-TMy4nf/blib/lib/LJ/Schedule/Post.pm line 78.
# BEGIN failed--compilation aborted at /home/david/.cpan/build/LJ-Schedule-0.6-TMy4nf/blib/lib/LJ/Schedule/Post.pm line 78.
# Compilation failed in require at (eval 4) line 2.
# BEGIN failed--compilation aborted at (eval 4) line 2.
Use of uninitialized value in concatenation (.) or string at t/00-load.t line 12.
# Testing LJ::Schedule , Perl 5.006002, /home/david/bin/perl562t
# Looks like you failed 2 tests of 4.
 Dubious, test returned 2 (wstat 512, 0x200)
 Failed 2/4 subtests 
t/01schedule.t......
#   Failed test 'use LJ::Schedule;'
#   at t/01schedule.t line 6.
#     Tried to use 'LJ::Schedule'.
#     Error:  Can't locate Date/Parse.pm in @INC (@INC contains: /home/david/.cpan/build/LJ-Schedule-0.6-TMy4nf/blib/lib /home/david/.cpan/build/LJ-Schedule-0.6-TMy4nf/blib/arch /home/david/.cpan/build/LJ-Schedule-0.6-TMy4nf/blib/lib /home/david/.cpan/build/LJ-Schedule-0.6-TMy4nf/blib/arch /home/david/perl/5.6.2-threads/lib/5.6.2/i686-linux-thread-multi-64int-ld /home/david/perl/5.6.2-threads/lib/5.6.2 /home/david/perl/5.6.2-threads/lib/site_perl/5.6.2/i686-linux-thread-multi-64int-ld /home/david/perl/5.6.2-threads/lib/site_perl/5.6.2 /home/david/perl/5.6.2-threads/lib/site_perl) at /home/david/.cpan/build/LJ-Schedule-0.6-TMy4nf/blib/lib/LJ/Schedule/Vcal.pm line 6.
# BEGIN failed--compilation aborted at /home/david/.cpan/build/LJ-Schedule-0.6-TMy4nf/blib/lib/LJ/Schedule/Vcal.pm line 6.
# Compilation failed in require at /home/david/.cpan/build/LJ-Schedule-0.6-TMy4nf/blib/lib/LJ/Schedule.pm line 118.
# BEGIN failed--compilation aborted at /home/david/.cpan/build/LJ-Schedule-0.6-TMy4nf/blib/lib/LJ/Schedule.pm line 118.
# Compilation failed in require at (eval 2) line 2.
# BEGIN failed--compilation aborted at (eval 2) line 2.
Undefined subroutine &LJ::Schedule::get_config called at t/01schedule.t line 9.
# Looks like you planned 7 tests but only ran 1.
# Looks like you failed 1 test of 1 run.
# Looks like your test died just after 1.
 Dubious, test returned 255 (wstat 65280, 0xff00)
 Failed 7/7 subtests 
t/02vcal.t..........
#   Failed test 'use LJ::Schedule::Vcal;'
#   at t/02vcal.t line 8.
#     Tried to use 'LJ::Schedule::Vcal'.
#     Error:  Can't locate Date/Parse.pm in @INC (@INC contains: /home/david/.cpan/build/LJ-Schedule-0.6-TMy4nf/blib/lib /home/david/.cpan/build/LJ-Schedule-0.6-TMy4nf/blib/arch /home/david/.cpan/build/LJ-Schedule-0.6-TMy4nf/blib/lib /home/david/.cpan/build/LJ-Schedule-0.6-TMy4nf/blib/arch /home/david/perl/5.6.2-threads/lib/5.6.2/i686-linux-thread-multi-64int-ld /home/david/perl/5.6.2-threads/lib/5.6.2 /home/david/perl/5.6.2-threads/lib/site_perl/5.6.2/i686-linux-thread-multi-64int-ld /home/david/perl/5.6.2-threads/lib/site_perl/5.6.2 /home/david/perl/5.6.2-threads/lib/site_perl) at /home/david/.cpan/build/LJ-Schedule-0.6-TMy4nf/blib/lib/LJ/Schedule/Vcal.pm line 6.
# BEGIN failed--compilation aborted at /home/david/.cpan/build/LJ-Schedule-0.6-TMy4nf/blib/lib/LJ/Schedule/Vcal.pm line 6.
# Compilation failed in require at (eval 2) line 2.
# BEGIN failed--compilation aborted at (eval 2) line 2.
Can't locate object method "new" via package "LJ::Schedule::Vcal" (perhaps you forgot to load "LJ::Schedule::Vcal"?) at t/02vcal.t line 15.
# Looks like you planned 2 tests but only ran 1.
# Looks like you failed 1 test of 1 run.
# Looks like your test died just after 1.
 Dubious, test returned 255 (wstat 65280, 0xff00)
 Failed 2/2 subtests 
t/boilerplate.t.....ok
t/pod-coverage.t....skipped: Test::Pod::Coverage 1.04 required for testing POD coverage
t/pod.t.............skipped: Test::Pod 1.14 required for testing POD

Test Summary Report
-------------------
t/00-load.t     (Wstat: 512 Tests: 4 Failed: 2)
  Failed tests:  1, 3
  Non-zero exit status: 2
t/01schedule.t  (Wstat: 65280 Tests: 1 Failed: 1)
  Failed test:  1
  Non-zero exit status: 255
  Parse errors: Bad plan.  You planned 7 tests but ran 1.
t/02vcal.t      (Wstat: 65280 Tests: 1 Failed: 1)
  Failed test:  1
  Non-zero exit status: 255
  Parse errors: Bad plan.  You planned 2 tests but ran 1.
Files=6, Tests=12,  0 wallclock secs ( 0.02 usr  0.03 sys +  0.08 cusr  0.12 csys =  0.25 CPU)
Result: FAIL
Failed 3/6 test programs. 4/12 subtests failed.
make: *** [test_dynamic] Error 11

------------------------------
PREREQUISITES
------------------------------

Prerequisite modules loaded:

requires:

    Module     Need Have
    ---------- ---- ----
    Test::More 0    0.80

------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------

Environment variables:

    AUTOMATED_TESTING = 1
    LANG = en_US.UTF-8
    LD_LIBRARY_PATH = /home/david/opt/subversion/lib
    PATH = .:/home/david/bin:/home/david/git/utility-scripts:/home/david/perl/current/bin:.:/home/david/bin:/home/david/git/utility-scripts:/home/david/perl/current/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games
    PERL5LIB = 
    PERL5OPT = 
    PERL5_CPANPLUS_IS_RUNNING = 5985
    PERL5_CPAN_IS_RUNNING = 5985
    PERL5_CPAN_IS_RUNNING_IN_RECURSION = 4800,5985
    PERL_CR_SMOKER_CURRENT = LJ-Schedule-0.6
    PERL_MM_USE_DEFAULT = 1
    SHELL = /bin/bash
    TERM = screen

Perl special variables (and OS-specific diagnostics, for MSWin32):

    $^X = /home/david/bin/perl562t
    $UID/$EUID = 1000 / 1000
    $GID = 1000 1000 116 115 107 46 44 30 29 25 24 20 4
    $EGID = 1000 1000 116 115 107 46 44 30 29 25 24 20 4

Perl module toolchain versions installed:

    Module              Have   
    ------------------- -------
    CPAN                1.92_63
    Cwd                 3.2701 
    ExtUtils::CBuilder  0.23   
    ExtUtils::Command   1.13   
    ExtUtils::Install   1.45   
    ExtUtils::MakeMaker 6.44   
    ExtUtils::Manifest  1.51   
    ExtUtils::ParseXS   n/a    
    File::Spec          3.2701 
    Module::Build       0.2808 
    Module::Signature   n/a    
    Test::Harness       3.11   
    Test::More          0.80   
    YAML                n/a    
    YAML::Syck          1.05   
    version             n/a    


--

Summary of my perl5 (revision 5.0 version 6 subversion 2) configuration:
  Platform:
    osname=linux, osvers=2.6.24-16-generic, archname=i686-linux-thread-multi-64int-ld
    uname='linux griffon 2.6.24-16-generic #1 smp thu apr 10 13:23:42 utc 2008 i686 gnulinux '
    config_args='-de -Uversiononly -Dusedevel -Dusemorebits -Dprefix=/home/david/perl/5.6.2-threads -Dmydomain=.hyperbolic.net -Dcf_email=dagolden@cpan.org -Dperladmin=dagolden@cpan.org -Dcc=gcc -Dusethreads'
    hint=recommended, useposix=true, d_sigaction=define
    usethreads=define use5005threads=undef useithreads=define usemultiplicity=define
    useperlio=undef d_sfio=undef uselargefiles=define usesocks=undef
    use64bitint=define use64bitall=undef uselongdouble=define
  Compiler:
    cc='gcc', ccflags ='-D_REENTRANT -D_GNU_SOURCE -fno-strict-aliasing -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64',
    optimize='-O2',
    cppflags='-D_REENTRANT -D_GNU_SOURCE -fno-strict-aliasing -I/usr/local/include'
    ccversion='', gccversion='4.2.3 (Ubuntu 4.2.3-2ubuntu7)', gccosandvers=''
    intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=12345678
    d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=12
    ivtype='long long', ivsize=8, nvtype='long double', nvsize=12, Off_t='off_t', lseeksize=8
    alignbytes=4, usemymalloc=n, prototype=define
  Linker and Libraries:
    ld='gcc', ldflags =' -L/usr/local/lib'
    libpth=/usr/local/lib /lib /usr/lib
    libs=-lnsl -ldl -lm -lpthread -lc -lcrypt -lutil
    perllibs=-lnsl -ldl -lm -lpthread -lc -lcrypt -lutil
    libc=/lib/libc-2.7.so, so=so, useshrplib=false, libperl=libperl.a
  Dynamic Linking:
    dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-rdynamic'
    cccdlflags='-fpic', lddlflags='-shared -L/usr/local/lib'

Comments to Ask Bjørn Hansen at ask@perl.org | Group listing | About