Front page | perl.cpan.testers |
Postings from June 2008
FAIL Mail-Mbox-MessageParser-1.5000 i686-linux-thread-multi-64int-ld 2.6.24-16-generic
From:
DAGOLDEN
Date:
June 24, 2008 03:46
Subject:
FAIL Mail-Mbox-MessageParser-1.5000 i686-linux-thread-multi-64int-ld 2.6.24-16-generic
This distribution has been tested as part of the cpan-testers
effort to test as many new uploads to CPAN as possible. See
http://testers.cpan.org/
--
Dear David Coppit,
This is a computer-generated report for Mail-Mbox-MessageParser-1.5000
on perl 5.10.0 patch 34034, created by CPAN-Reporter-1.1556.
Thank you for uploading your work to CPAN. However, there was a problem
testing your distribution.
If you think this report is invalid, please consult the CPAN Testers Wiki
for suggestions on how to avoid getting FAIL reports for missing library
or binary dependencies, unsupported operating systems, and so on:
http://cpantest.grango.org/wiki/CPANAuthorNotes
Sections of this report:
* Tester comments
* Program output
* Prerequisites
* Environment and other context
------------------------------
TESTER COMMENTS
------------------------------
Additional comments from tester:
this report is from an automated smoke testing program
and was not reviewed by a human for accuracy
------------------------------
PROGRAM OUTPUT
------------------------------
Output from '/usr/bin/make test':
/home/david/perl/5.10.x-threads/bin/perl -Iinc Makefile.PL --config= --installdeps=FileHandle::Unget,0
------------------------------------------------------------------------------
Enter the full path, or "none" for none.
Where can I find your "bzip" executable? (bzip2 type) [/bin/bzip2] /bin/bzip2
Where can I find your "bzip2" executable? (bzip2 type) [/bin/bzip2] /bin/bzip2
Where can I find your "diff" executable? [/usr/bin/diff] /usr/bin/diff
Where can I find your "grep" executable? (GNU type) [/bin/grep] /bin/grep
Where can I find your "gzip" executable? [/bin/gzip] /bin/gzip
------------------------------------------------------------------------------
Skip blib/lib/Mail/Mbox/MessageParser/Perl.pm (unchanged)
Skip blib/lib/Mail/Mbox/MessageParser.pm (unchanged)
Skip blib/lib/Mail/Mbox/MessageParser/Grep.pm (unchanged)
Skip blib/lib/Mail/Mbox/MessageParser/MetaInfo.pm (unchanged)
Skip blib/lib/Mail/Mbox/MessageParser/Cache.pm (unchanged)
Skip blib/lib/Mail/Mbox/MessageParser/Config.pm (unchanged)
PERL_DL_NONLAZY=1 /home/david/perl/5.10.x-threads/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'inc', 'blib/lib', 'blib/arch')" t/appended_mailbox.t t/bzip2.t t/endline.t t/filehandle_compressed.t t/filehandle_noncompressed.t t/filename_compressed.t t/filename_noncompressed.t t/grep.t t/gzip.t t/length.t t/line_number.t t/number.t t/offset.t t/prologue.t t/reset.t t/separators.t t/stdin_compressed.t t/stdin_uncompressed.t t/undef_return_value.t
t/appended_mailbox............ok
t/bzip2.......................ok
t/endline.....................ok
t/filehandle_compressed.......ok
t/filehandle_noncompressed....Couldn't initialize cache at t/Test/Utils.pm line 100.
# Looks like you planned 44 tests but only ran 37.
# Looks like your test died just after 37.
Dubious, test returned 255 (wstat 65280, 0xff00)
Failed 7/44 subtests
t/filename_compressed.........ok
t/filename_noncompressed......ok
t/grep........................ok
t/gzip........................ok
t/length......................
# Failed test 'Computing differences between t/results/length_invalid-boundaries.stdout and t/temp/length_invalid-boundaries_0_1.stdout'
# at t/length.t line 97.
# Failed test 'Computing differences between t/results/length_mailarc-1-dos.stdout and t/temp/length_mailarc-1-dos_0_0.stdout'
# at t/length.t line 97.
# Failed test 'Computing differences between t/results/length_mailarc-1-dos.stdout and t/temp/length_mailarc-1-dos_1_0.stdout'
# at t/length.t line 97.
# Failed test 'Computing differences between t/results/length_mailarc-1-dos.stdout and t/temp/length_mailarc-1-dos_0_1.stdout'
# at t/length.t line 97.
# Failed test 'Computing differences between t/results/length_mailarc-1.stdout and t/temp/length_mailarc-1_0_0.stdout'
# at t/length.t line 97.
# Failed test 'Computing differences between t/results/length_mailarc-1.stdout and t/temp/length_mailarc-1_1_0.stdout'
# at t/length.t line 97.
# Failed test 'Computing differences between t/results/length_mailarc-1.stdout and t/temp/length_mailarc-1_0_1.stdout'
# at t/length.t line 97.
# Failed test 'Computing differences between t/results/length_mailarc-2.stdout and t/temp/length_mailarc-2_0_1.stdout'
# at t/length.t line 97.
# Failed test 'Computing differences between t/results/length_mailarc-3.stdout and t/temp/length_mailarc-3_0_0.stdout'
# at t/length.t line 97.
# Failed test 'Computing differences between t/results/length_mailarc-3.stdout and t/temp/length_mailarc-3_1_0.stdout'
# at t/length.t line 97.
# Failed test 'Computing differences between t/results/length_mailarc-3.stdout and t/temp/length_mailarc-3_0_1.stdout'
# at t/length.t line 97.
# Failed test 'Computing differences between t/results/length_mailbox with space.stdout and t/temp/length_mailbox with space_0_1.stdout'
# at t/length.t line 97.
# Failed test 'Computing differences between t/results/length_mailseparators.stdout and t/temp/length_mailseparators_0_1.stdout'
# at t/length.t line 97.
# Failed test 'Computing differences between t/results/length_newlines_at_beginning.stdout and t/temp/length_newlines_at_beginning_0_0.stdout'
# at t/length.t line 97.
Couldn't initialize cache at t/Test/Utils.pm line 100.
# Looks like you planned 30 tests but only ran 28.
# Looks like you failed 14 tests of 28 run.
# Looks like your test died just after 28.
Dubious, test returned 255 (wstat 65280, 0xff00)
Failed 16/30 subtests
t/line_number.................
# Failed test 'Computing differences between t/results/line_number_invalid-boundaries.stdout and t/temp/line_number_invalid-boundaries_0_1.stdout'
# at t/line_number.t line 97.
# Failed test 'Computing differences between t/results/line_number_mailarc-1-dos.stdout and t/temp/line_number_mailarc-1-dos_0_0.stdout'
# at t/line_number.t line 97.
# Failed test 'Computing differences between t/results/line_number_mailarc-1-dos.stdout and t/temp/line_number_mailarc-1-dos_1_0.stdout'
# at t/line_number.t line 97.
# Failed test 'Computing differences between t/results/line_number_mailarc-1-dos.stdout and t/temp/line_number_mailarc-1-dos_0_1.stdout'
# at t/line_number.t line 97.
# Failed test 'Computing differences between t/results/line_number_mailarc-1.stdout and t/temp/line_number_mailarc-1_0_0.stdout'
# at t/line_number.t line 97.
# Failed test 'Computing differences between t/results/line_number_mailarc-1.stdout and t/temp/line_number_mailarc-1_1_0.stdout'
# at t/line_number.t line 97.
# Failed test 'Computing differences between t/results/line_number_mailarc-1.stdout and t/temp/line_number_mailarc-1_0_1.stdout'
# at t/line_number.t line 97.
# Failed test 'Computing differences between t/results/line_number_mailarc-2.stdout and t/temp/line_number_mailarc-2_0_1.stdout'
# at t/line_number.t line 97.
# Failed test 'Computing differences between t/results/line_number_mailarc-3.stdout and t/temp/line_number_mailarc-3_0_0.stdout'
# at t/line_number.t line 97.
# Failed test 'Computing differences between t/results/line_number_mailarc-3.stdout and t/temp/line_number_mailarc-3_1_0.stdout'
# at t/line_number.t line 97.
# Failed test 'Computing differences between t/results/line_number_mailarc-3.stdout and t/temp/line_number_mailarc-3_0_1.stdout'
# at t/line_number.t line 97.
# Failed test 'Computing differences between t/results/line_number_mailbox with space.stdout and t/temp/line_number_mailbox with space_0_1.stdout'
# at t/line_number.t line 97.
# Failed test 'Computing differences between t/results/line_number_mailseparators.stdout and t/temp/line_number_mailseparators_0_1.stdout'
# at t/line_number.t line 97.
# Failed test 'Computing differences between t/results/line_number_newlines_at_beginning.stdout and t/temp/line_number_newlines_at_beginning_0_0.stdout'
# at t/line_number.t line 97.
Couldn't initialize cache at t/Test/Utils.pm line 100.
# Looks like you planned 30 tests but only ran 28.
# Looks like you failed 14 tests of 28 run.
# Looks like your test died just after 28.
Dubious, test returned 255 (wstat 65280, 0xff00)
Failed 16/30 subtests
t/number......................
# Failed test 'Computing differences between t/results/number_invalid-boundaries.stdout and t/temp/number_invalid-boundaries_0_1.stdout'
# at t/number.t line 97.
# Failed test 'Computing differences between t/results/number_mailarc-1-dos.stdout and t/temp/number_mailarc-1-dos_0_0.stdout'
# at t/number.t line 97.
# Failed test 'Computing differences between t/results/number_mailarc-1-dos.stdout and t/temp/number_mailarc-1-dos_1_0.stdout'
# at t/number.t line 97.
# Failed test 'Computing differences between t/results/number_mailarc-1-dos.stdout and t/temp/number_mailarc-1-dos_0_1.stdout'
# at t/number.t line 97.
# Failed test 'Computing differences between t/results/number_mailarc-1.stdout and t/temp/number_mailarc-1_0_0.stdout'
# at t/number.t line 97.
# Failed test 'Computing differences between t/results/number_mailarc-1.stdout and t/temp/number_mailarc-1_1_0.stdout'
# at t/number.t line 97.
# Failed test 'Computing differences between t/results/number_mailarc-1.stdout and t/temp/number_mailarc-1_0_1.stdout'
# at t/number.t line 97.
# Failed test 'Computing differences between t/results/number_mailarc-2.stdout and t/temp/number_mailarc-2_0_1.stdout'
# at t/number.t line 97.
# Failed test 'Computing differences between t/results/number_mailarc-3.stdout and t/temp/number_mailarc-3_0_0.stdout'
# at t/number.t line 97.
# Failed test 'Computing differences between t/results/number_mailarc-3.stdout and t/temp/number_mailarc-3_1_0.stdout'
# at t/number.t line 97.
# Failed test 'Computing differences between t/results/number_mailarc-3.stdout and t/temp/number_mailarc-3_0_1.stdout'
# at t/number.t line 97.
# Failed test 'Computing differences between t/results/number_mailbox with space.stdout and t/temp/number_mailbox with space_0_1.stdout'
# at t/number.t line 97.
# Failed test 'Computing differences between t/results/number_mailseparators.stdout and t/temp/number_mailseparators_0_1.stdout'
# at t/number.t line 97.
# Failed test 'Computing differences between t/results/number_newlines_at_beginning.stdout and t/temp/number_newlines_at_beginning_0_0.stdout'
# at t/number.t line 97.
Couldn't initialize cache at t/Test/Utils.pm line 100.
# Looks like you planned 30 tests but only ran 28.
# Looks like you failed 14 tests of 28 run.
# Looks like your test died just after 28.
Dubious, test returned 255 (wstat 65280, 0xff00)
Failed 16/30 subtests
t/offset......................
# Failed test 'Computing differences between t/results/offset_invalid-boundaries.stdout and t/temp/offset_invalid-boundaries_0_1.stdout'
# at t/offset.t line 97.
# Failed test 'Computing differences between t/results/offset_mailarc-1-dos.stdout and t/temp/offset_mailarc-1-dos_0_0.stdout'
# at t/offset.t line 97.
# Failed test 'Computing differences between t/results/offset_mailarc-1-dos.stdout and t/temp/offset_mailarc-1-dos_1_0.stdout'
# at t/offset.t line 97.
# Failed test 'Computing differences between t/results/offset_mailarc-1-dos.stdout and t/temp/offset_mailarc-1-dos_0_1.stdout'
# at t/offset.t line 97.
# Failed test 'Computing differences between t/results/offset_mailarc-1.stdout and t/temp/offset_mailarc-1_0_0.stdout'
# at t/offset.t line 97.
# Failed test 'Computing differences between t/results/offset_mailarc-1.stdout and t/temp/offset_mailarc-1_1_0.stdout'
# at t/offset.t line 97.
# Failed test 'Computing differences between t/results/offset_mailarc-1.stdout and t/temp/offset_mailarc-1_0_1.stdout'
# at t/offset.t line 97.
# Failed test 'Computing differences between t/results/offset_mailarc-2.stdout and t/temp/offset_mailarc-2_0_1.stdout'
# at t/offset.t line 97.
# Failed test 'Computing differences between t/results/offset_mailarc-3.stdout and t/temp/offset_mailarc-3_0_0.stdout'
# at t/offset.t line 97.
# Failed test 'Computing differences between t/results/offset_mailarc-3.stdout and t/temp/offset_mailarc-3_1_0.stdout'
# at t/offset.t line 97.
# Failed test 'Computing differences between t/results/offset_mailarc-3.stdout and t/temp/offset_mailarc-3_0_1.stdout'
# at t/offset.t line 97.
# Failed test 'Computing differences between t/results/offset_mailbox with space.stdout and t/temp/offset_mailbox with space_0_1.stdout'
# at t/offset.t line 97.
# Failed test 'Computing differences between t/results/offset_mailseparators.stdout and t/temp/offset_mailseparators_0_1.stdout'
# at t/offset.t line 97.
# Failed test 'Computing differences between t/results/offset_newlines_at_beginning.stdout and t/temp/offset_newlines_at_beginning_0_0.stdout'
# at t/offset.t line 97.
Couldn't initialize cache at t/Test/Utils.pm line 100.
# Looks like you planned 30 tests but only ran 28.
# Looks like you failed 14 tests of 28 run.
# Looks like your test died just after 28.
Dubious, test returned 255 (wstat 65280, 0xff00)
Failed 16/30 subtests
t/prologue....................
# Failed test at t/prologue.t line 84.
Couldn't initialize cache at t/Test/Utils.pm line 100.
# Looks like you planned 33 tests but only ran 28.
# Looks like you failed 1 test of 28 run.
# Looks like your test died just after 28.
Dubious, test returned 255 (wstat 65280, 0xff00)
Failed 6/33 subtests
t/reset.......................Use of uninitialized value $length_to_read in subtraction (-) at /home/david/.cpan/build/Mail-Mbox-MessageParser-1.5000-rZj4Nd/blib/lib/Mail/Mbox/MessageParser/Grep.pm line 413.
Use of uninitialized value $length_to_read in numeric ne (!=) at /home/david/.cpan/build/Mail-Mbox-MessageParser-1.5000-rZj4Nd/blib/lib/Mail/Mbox/MessageParser/Grep.pm line 412.
Use of uninitialized value in numeric gt (>) at /home/david/.cpan/build/Mail-Mbox-MessageParser-1.5000-rZj4Nd/blib/lib/Mail/Mbox/MessageParser/Grep.pm line 309.
Error: Cannot adjust cache data. Please email the author with your mailbox to
have him fix the problem. In the meantime, disable the grep implementation.
# Looks like you planned 60 tests but only ran 14.
# Looks like your test died just after 14.
Dubious, test returned 255 (wstat 65280, 0xff00)
Failed 46/60 subtests
t/separators..................
# Failed test 'Number of emails in t/mailboxes/separators2.sep'
# at t/separators.t line 97.
# got: '1'
# expected: '2'
# Failed test 'Number of emails in t/mailboxes/separators1.sep'
# at t/separators.t line 97.
# got: '1'
# expected: '4'
# Failed test 'Number of emails in t/mailboxes/separators1.sep'
# at t/separators.t line 97.
# got: '1'
# expected: '4'
# Failed test 'Number of emails in t/mailboxes/separators1.sep'
# at t/separators.t line 97.
# got: '1'
# expected: '4'
# Looks like you failed 4 tests of 6.
Dubious, test returned 4 (wstat 1024, 0x400)
Failed 4/6 subtests
t/stdin_compressed............ok
t/stdin_uncompressed..........ok
t/undef_return_value..........Couldn't initialize cache at t/Test/Utils.pm line 100.
# Looks like you planned 33 tests but only ran 28.
# Looks like your test died just after 28.
Dubious, test returned 255 (wstat 65280, 0xff00)
Failed 5/33 subtests
Test Summary Report
-------------------
t/filehandle_noncompressed (Wstat: 65280 Tests: 37 Failed: 0)
Non-zero exit status: 255
Parse errors: Bad plan. You planned 44 tests but ran 37.
t/length (Wstat: 65280 Tests: 28 Failed: 14)
Failed tests: 9-15, 18-21, 24, 27-28
Non-zero exit status: 255
Parse errors: Bad plan. You planned 30 tests but ran 28.
t/line_number (Wstat: 65280 Tests: 28 Failed: 14)
Failed tests: 9-15, 18-21, 24, 27-28
Non-zero exit status: 255
Parse errors: Bad plan. You planned 30 tests but ran 28.
t/number (Wstat: 65280 Tests: 28 Failed: 14)
Failed tests: 9-15, 18-21, 24, 27-28
Non-zero exit status: 255
Parse errors: Bad plan. You planned 30 tests but ran 28.
t/offset (Wstat: 65280 Tests: 28 Failed: 14)
Failed tests: 9-15, 18-21, 24, 27-28
Non-zero exit status: 255
Parse errors: Bad plan. You planned 30 tests but ran 28.
t/prologue (Wstat: 65280 Tests: 28 Failed: 1)
Failed test: 28
Non-zero exit status: 255
Parse errors: Bad plan. You planned 33 tests but ran 28.
t/reset (Wstat: 65280 Tests: 14 Failed: 0)
Non-zero exit status: 255
Parse errors: Bad plan. You planned 60 tests but ran 14.
t/separators (Wstat: 1024 Tests: 6 Failed: 4)
Failed tests: 3-6
Non-zero exit status: 4
t/undef_return_value (Wstat: 65280 Tests: 28 Failed: 0)
Non-zero exit status: 255
Parse errors: Bad plan. You planned 33 tests but ran 28.
Files=19, Tests=285, 8 wallclock secs ( 0.03 usr 0.23 sys + 3.69 cusr 3.21 csys = 7.16 CPU)
Result: FAIL
Failed 9/19 test programs. 61/285 subtests failed.
make: *** [test_dynamic] Error 255
------------------------------
PREREQUISITES
------------------------------
Prerequisite modules loaded:
requires:
Module Need Have
----------------- ---- ------
FileHandle::Unget 0 0.1621
Storable 0 2.18
Test::More 0 0.80
Text::Diff 0 0.35
------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------
Environment variables:
AUTOMATED_TESTING = 1
LANG = en_US.UTF-8
LD_LIBRARY_PATH = /home/david/opt/subversion/lib
PATH = .:/home/david/bin:/home/david/git/utility-scripts:/home/david/perl/current/bin:.:/home/david/bin:/home/david/git/utility-scripts:/home/david/perl/current/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games
PERL5LIB = /home/david/.cpan/build/FileHandle-Unget-0.1621-lxXGVY/blib/arch:/home/david/.cpan/build/FileHandle-Unget-0.1621-lxXGVY/blib/lib:/home/david/.cpan/build/Text-Diff-0.35-eKaOhz/blib/arch:/home/david/.cpan/build/Text-Diff-0.35-eKaOhz/blib/lib:/home/david/.cpan/build/Algorithm-Diff-1.1902-cBHAEu/blib/arch:/home/david/.cpan/build/Algorithm-Diff-1.1902-cBHAEu/blib/lib
PERL5OPT =
PERL5_CPANPLUS_IS_RUNNING = 11639
PERL5_CPAN_IS_RUNNING = 11639
PERL5_CPAN_IS_RUNNING_IN_RECURSION = 13520,11639
PERL_CR_SMOKER_CURRENT = Mail-Mbox-MessageParser-1.5000
PERL_MM_USE_DEFAULT = 1
SHELL = /bin/bash
TERM = screen
Perl special variables (and OS-specific diagnostics, for MSWin32):
$^X = /home/david/perl/5.10.x-threads/bin/perl
$UID/$EUID = 1000 / 1000
$GID = 1000 4 20 24 25 29 30 44 46 107 115 116 1000
$EGID = 1000 4 20 24 25 29 30 44 46 107 115 116 1000
Perl module toolchain versions installed:
Module Have
------------------- ---------
CPAN 1.92_63
Cwd 3.2701
ExtUtils::CBuilder 0.23
ExtUtils::Command 1.14
ExtUtils::Install 1.50_01
ExtUtils::MakeMaker 6.44
ExtUtils::Manifest 1.51_01
ExtUtils::ParseXS 2.19_01
File::Spec 3.2701
Module::Build 0.2808_02
Module::Signature n/a
Test::Harness 3.12
Test::More 0.80
YAML 0.66
YAML::Syck 1.05
version 0.74
--
Summary of my perl5 (revision 5 version 10 subversion 0 patch 34034) configuration:
Platform:
osname=linux, osvers=2.6.24-16-generic, archname=i686-linux-thread-multi-64int-ld
uname='linux griffon 2.6.24-16-generic #1 smp thu apr 10 13:23:42 utc 2008 i686 gnulinux '
config_args='-de -Uversiononly -Dusedevel -Dusemorebits -Dprefix=/home/david/perl/5.10.x-threads -Dmydomain=.hyperbolic.net -Dcf_email=dagolden@cpan.org -Dperladmin=dagolden@cpan.org -Dcc=gcc -Dusethreads'
hint=recommended, useposix=true, d_sigaction=define
useithreads=define, usemultiplicity=define
useperlio=define, d_sfio=undef, uselargefiles=define, usesocks=undef
use64bitint=define, use64bitall=undef, uselongdouble=define
usemymalloc=n, bincompat5005=undef
Compiler:
cc='gcc', ccflags ='-D_REENTRANT -D_GNU_SOURCE -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64',
optimize='-O2',
cppflags='-D_REENTRANT -D_GNU_SOURCE -fno-strict-aliasing -pipe -fstack-protector -I/usr/local/include'
ccversion='', gccversion='4.2.3 (Ubuntu 4.2.3-2ubuntu7)', gccosandvers=''
intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=12345678
d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=12
ivtype='long long', ivsize=8, nvtype='long double', nvsize=12, Off_t='off_t', lseeksize=8
alignbytes=4, prototype=define
Linker and Libraries:
ld='gcc', ldflags =' -fstack-protector -L/usr/local/lib'
libpth=/usr/local/lib /lib /usr/lib
libs=-lnsl -ldb -ldl -lm -lcrypt -lutil -lpthread -lc
perllibs=-lnsl -ldl -lm -lcrypt -lutil -lpthread -lc
libc=/lib/libc-2.7.so, so=so, useshrplib=false, libperl=libperl.a
gnulibc_version='2.7'
Dynamic Linking:
dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E'
cccdlflags='-fPIC', lddlflags='-shared -O2 -L/usr/local/lib -fstack-protector'
-
FAIL Mail-Mbox-MessageParser-1.5000 i686-linux-thread-multi-64int-ld 2.6.24-16-generic
by DAGOLDEN