Front page | perl.cpan.testers |
Postings from January 2005
FAIL Script-Toolbox-0.11 MSWin32-x86-multi-thread 4.0
Thread Previous
From:
rrwo
Date:
January 20, 2005 17:47
Subject:
FAIL Script-Toolbox-0.11 MSWin32-x86-multi-thread 4.0
This distribution has been tested as part of the cpan-testers
effort to test as many new uploads to CPAN as possible. See
http://testers.cpan.org/
Please cc any replies to cpan-testers@perl.org to keep other
test volunteers informed and to prevent any duplicate effort.
--
******************************** NOTE ********************************
The comments below are created mechanically, possibly without manual
checking by the sender. As there are many people performing automatic
tests on each upload to CPAN, it is likely that you will receive
identical messages about the same problem.
If you believe that the message is mistaken, please reply to the first
one with correction and/or additional information, and do not take
it personally. (We appreciate your patience. :)
**********************************************************************
Hello, ECKARDT! This is a computer-generated error report created
automatically by CPANPLUS, version 0.051.
Comments from the tester may appear at the end of this report, as well.
Thanks for uploading your works to CPAN. However, it appears that
CPANPLUS encountered problems while testing your distribution.
TEST RESULTS:
Below is the error stack from stage 'make test':
[MSG] [Fri Jan 21 01:46:48 2005] Trying to get 'ftp://cpan.etla.org/pub/CPAN/authors/id/E/EC/ECKARDT/Script-Toolbox-0.11.tar.gz'
[MSG] [Fri Jan 21 01:46:49 2005] Trying to get 'ftp://cpan.etla.org/pub/CPAN/authors/id/E/EC/ECKARDT/CHECKSUMS'
[MSG] [Fri Jan 21 01:46:50 2005] Checksum matches for 'Script-Toolbox-0.11.tar.gz'
[MSG] [Fri Jan 21 01:46:50 2005] Extracted 'Script-Toolbox-0.11/'
[MSG] [Fri Jan 21 01:46:50 2005] Extracted 'Script-Toolbox-0.11/t/'
[MSG] [Fri Jan 21 01:46:50 2005] Extracted 'Script-Toolbox-0.11/t/5_GetSet.t'
[MSG] [Fri Jan 21 01:46:50 2005] Extracted 'Script-Toolbox-0.11/t/7_File.t'
[MSG] [Fri Jan 21 01:46:51 2005] Extracted 'Script-Toolbox-0.11/t/4_Open.t'
[MSG] [Fri Jan 21 01:46:51 2005] Extracted 'Script-Toolbox-0.11/t/8_Dir.t'
[MSG] [Fri Jan 21 01:46:51 2005] Extracted 'Script-Toolbox-0.11/t/1_new.t'
[MSG] [Fri Jan 21 01:46:51 2005] Extracted 'Script-Toolbox-0.11/t/2_Log.t'
[MSG] [Fri Jan 21 01:46:51 2005] Extracted 'Script-Toolbox-0.11/t/3_Exit.t'
[MSG] [Fri Jan 21 01:46:51 2005] Extracted 'Script-Toolbox-0.11/t/6_Table.t'
[MSG] [Fri Jan 21 01:46:51 2005] Extracted 'Script-Toolbox-0.11/Util/'
[MSG] [Fri Jan 21 01:46:51 2005] Extracted 'Script-Toolbox-0.11/Util/Opt/'
[MSG] [Fri Jan 21 01:46:51 2005] Extracted 'Script-Toolbox-0.11/Util/Opt/Opt.pm'
[MSG] [Fri Jan 21 01:46:51 2005] Extracted 'Script-Toolbox-0.11/Util/Opt/Makefile.PL'
[MSG] [Fri Jan 21 01:46:51 2005] Extracted 'Script-Toolbox-0.11/Util/Util.pm'
[MSG] [Fri Jan 21 01:46:51 2005] Extracted 'Script-Toolbox-0.11/Util/Formatter/'
[MSG] [Fri Jan 21 01:46:51 2005] Extracted 'Script-Toolbox-0.11/Util/Formatter/Formatter.pm'
[MSG] [Fri Jan 21 01:46:51 2005] Extracted 'Script-Toolbox-0.11/Util/Formatter/Makefile.PL'
[MSG] [Fri Jan 21 01:46:51 2005] Extracted 'Script-Toolbox-0.11/Util/Makefile.PL'
[MSG] [Fri Jan 21 01:46:51 2005] Extracted 'Script-Toolbox-0.11/README'
[MSG] [Fri Jan 21 01:46:51 2005] Extracted 'Script-Toolbox-0.11/Makefile.PL'
[MSG] [Fri Jan 21 01:46:51 2005] Extracted 'Script-Toolbox-0.11/META.yml'
[MSG] [Fri Jan 21 01:46:51 2005] Extracted 'Script-Toolbox-0.11/MANIFEST'
[MSG] [Fri Jan 21 01:46:51 2005] Extracted 'Script-Toolbox-0.11/Toolbox.pm'
[MSG] [Fri Jan 21 01:46:51 2005] Extracted 'Script::Toolbox' to 'C:\Documents and Settings\Rob.MAGNETO-XP\Application Data\.cpanplus\5.8.6\build\Script-Toolbox-0.11'
[ERROR] [Fri Jan 21 01:47:25 2005] MAKE TEST failed: No such file or directory C:\Perl\bin\perl.exe "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib\lib', 'blib\arch')" t\1_new.t t\2_Log.t t\3_Exit.t t\4_Open.t t\5_GetSet.t t\6_Table.t t\7_File.t t\8_Dir.t
t\1_new.......dubious
Test returned status 7 (wstat 1792, 0x700)
DIED. FAILED tests 6-12
Failed 7/12 tests, 41.67% okay
t\2_Log.......dubious
Test returned status 9 (wstat 2304, 0x900)
DIED. FAILED tests 1, 4-5, 8-9, 13-15, 18
Failed 9/18 tests, 50.00% okay
t\3_Exit......dubious
Test returned status 2 (wstat 512, 0x200)
DIED. FAILED tests 1-2
Failed 2/2 tests, 0.00% okay
t\4_Open......ok
t\5_GetSet....ok
t\6_Table.....dubious
Test returned status 10 (wstat 2560, 0xa00)
DIED. FAILED tests 2-11
Failed 10/11 tests, 9.09% okay
t\7_File......dubious
Test returned status 22 (wstat 5632, 0x1600)
DIED. FAILED tests 2-23
Failed 22/23 tests, 4.35% okay
t\8_Dir.......dubious
Test returned status 10 (wstat 2560, 0xa00)
DIED. FAILED tests 2-11
Failed 10/11 tests, 9.09% okay
Failed Test Stat Wstat Total Fail Failed List of Failed
-------------------------------------------------------------------------------
t\1_new.t 7 1792 12 7 58.33% 6-12
t\2_Log.t 9 2304 18 9 50.00% 1 4-5 8-9 13-15 18
t\3_Exit.t 2 512 2 2 100.00% 1-2
t\6_Table.t 10 2560 11 20 181.82% 2-11
t\7_File.t 22 5632 23 44 191.30% 2-23
t\8_Dir.t 10 2560 11 20 181.82% 2-11
Microsoft (R) Program Maintenance Utility Version 1.50
Copyright (c) Microsoft Corp 1988-94. All rights reserved.
The system cannot find the path specified.
readline() on closed filehandle FH at t\1_new.t line 18.
# Failed test (t\1_new.t at line 47)
# undef
# doesn't match '(?-xism:.*Invalid .*invalid.)'
The system cannot find the path specified.
readline() on closed filehandle FH at t\1_new.t line 18.
# Failed test (t\1_new.t at line 51)
# undef
# doesn't match '(?-xism:.*Invalid .*invalid.)'
The system cannot find the path specified.
readline() on closed filehandle FH at t\1_new.t line 18.
# Failed test (t\1_new.t at line 55)
# undef
# doesn't match '(?-xism:.*Invalid .*invalid.)'
The system cannot find the path specified.
readline() on closed filehandle FH at t\1_new.t line 18.
# Failed test (t\1_new.t at line 60)
# undef
# doesn't match '(?-xism:.*Invalid .*invalid.)'
The system cannot find the path specified.
readline() on closed filehandle FH at t\1_new.t line 18.
# Failed test (t\1_new.t at line 69)
# undef
# doesn't match '(?-xism:meier)'
The system cannot find the path specified.
readline() on closed filehandle FH at t\1_new.t line 18.
# Failed test (t\1_new.t at line 78)
# undef
# doesn't match '(?-xism:Missing mandatory option 'file'.)'
The system cannot find the path specified.
readline() on closed filehandle FH at t\1_new.t line 18.
# Failed test (t\1_new.t at line 85)
# undef
# doesn't match '(?-xism:meier)'
# Looks like you failed 7 tests of 12.
'rm' is not recognized as an internal or external command,
operable program or batch file.
The system cannot find the path specified.
# Failed test (t\2_Log.t at line 85)
# got: '1'
# expected: '0'
# Failed test (t\2_Log.t at line 88)
# undef
# doesn't match '(?-xism:^_TST_: [A-z]{3} [A-z]{3} +\d{1,2} \d{2}:\d{2}:\d{2} \d{4}: logtest)'
'rm' is not recognized as an internal or external command,
operable program or batch file.
The system cannot find the path specified.
# Failed test (t\2_Log.t at line 99)
# got: '1'
# expected: '0'
# Failed test (t\2_Log.t at line 102)
# undef
# doesn't match '(?-xism:^_TST_: [A-z]{3} [A-z]{3} +\d{1,2} \d{2}:\d{2}:\d{2} \d{4}: logtest)'
'rm' is not recognized as an internal or external command,
operable program or batch file.
The system cannot find the path specified.
# Failed test (t\2_Log.t at line 111)
# got: '1'
# expected: '0'
# Failed test (t\2_Log.t at line 115)
readline() on closed filehandle FH at t\2_Log.t line 116.
# Failed test (t\2_Log.t at line 117)
# undef
# doesn't match '(?-xism:^_TST_: [A-z]{3} [A-z]{3} +\d{1,2} \d{2}:\d{2}:\d{2} \d{4}: logtest)'
'rm' is not recognized as an internal or external command,
operable program or batch file.
The system cannot find the path specified.
# Failed test (t\2_Log.t at line 131)
# got: '1'
# expected: '0'
# Failed test (t\2_Log.t at line 134)
# undef
# doesn't match '(?-xism:^_TST_: [A-z]{3} [A-z]{3} +\d{1,2} \d{2}:\d{2}:\d{2} \d{4}: logtest)'
# Looks like you failed 9 tests of 18.
The system cannot find the path specified.
readline() on closed filehandle FH at t\3_Exit.t line 18.
# Failed test (t\3_Exit.t at line 34)
# got: '1'
# expected: '2'
# Failed test (t\3_Exit.t at line 35)
# undef
# doesn't match '(?-xism:\d{4}:\s+test)'
# Looks like you failed 2 tests of 2.
The syntax of the command is incorrect.
t\6_Table.t: Fri Jan 21 01:47:23 2005: Can't Open(>> /tmp/t\6_Table.log), $! is "No such file or directory" at t\6_Table.t line 27
# Looks like you planned 11 tests but only ran 1.
The syntax of the command is incorrect.
t\7_File.t: Fri Jan 21 01:47:24 2005: Can't Open(>> /tmp/t\7_File.log), $! is "No such file or directory" at t\7_File.t line 15
# Looks like you planned 23 tests but only ran 1.
The syntax of the command is incorrect.
t\8_Dir.t: Fri Jan 21 01:47:24 2005: Can't Open(>> /tmp/t\8_Dir.log), $! is "No such file or directory" at t\8_Dir.t line 15
# Looks like you planned 11 tests but only ran 1.
Failed 6/8 test scripts, 25.00% okay. 60/89 subtests failed, 32.58% okay.
NMAKE : fatal error U1077: 'C:\WINDOWS\system32\cmd.exe' : return code '0x2'
Stop.
--
Summary of my perl5 (revision 5 version 8 subversion 6) configuration:
Platform:
osname=MSWin32, osvers=4.0, archname=MSWin32-x86-multi-thread
uname=''
config_args='undef'
hint=recommended, useposix=true, d_sigaction=undef
usethreads=define use5005threads=undef useithreads=define usemultiplicity=define
useperlio=define d_sfio=undef uselargefiles=define usesocks=undef
use64bitint=undef use64bitall=undef uselongdouble=undef
usemymalloc=n, bincompat5005=undef
Compiler:
cc='cl', ccflags ='-nologo -Gf -W3 -MD -Zi -DNDEBUG -O1 -DWIN32 -D_CONSOLE -DNO_STRICT -DHAVE_DES_FCRYPT -DNO_HASH_SEED -DPERL_IMPLICIT_CONTEXT -DPERL_IMPLICIT_SYS -DUSE_PERLIO -DPERL_MSVCRT_READFIX',
optimize='-MD -Zi -DNDEBUG -O1',
cppflags='-DWIN32'
ccversion='', gccversion='', gccosandvers=''
intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=1234
d_longlong=undef, longlongsize=8, d_longdbl=define, longdblsize=10
ivtype='long', ivsize=4, nvtype='double', nvsize=8, Off_t='__int64', lseeksize=8
alignbytes=8, prototype=define
Linker and Libraries:
ld='link', ldflags ='-nologo -nodefaultlib -debug -opt:ref,icf -libpath:"C:\Perl\lib\CORE" -machine:x86'
libpth=\lib
libs= oldnames.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib netapi32.lib uuid.lib ws2_32.lib mpr.lib winmm.lib version.lib odbc32.lib odbccp32.lib msvcrt.lib
perllibs= oldnames.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib netapi32.lib uuid.lib ws2_32.lib mpr.lib winmm.lib version.lib odbc32.lib odbccp32.lib msvcrt.lib
libc=msvcrt.lib, so=dll, useshrplib=yes, libperl=perl58.lib
gnulibc_version='undef'
Dynamic Linking:
dlsrc=dl_win32.xs, dlext=dll, d_dlsymun=undef, ccdlflags=' '
cccdlflags=' ', lddlflags='-dll -nologo -nodefaultlib -debug -opt:ref,icf -libpath:"C:\Perl\lib\CORE" -machine:x86'
Thread Previous