Front page | perl.cpan.testers |
Postings from June 2008
FAIL CAS-0.89 i386-freebsd-64int 7.0-release
From:
stro
Date:
June 26, 2008 15:39
Subject:
FAIL CAS-0.89 i386-freebsd-64int 7.0-release
This distribution has been tested as part of the cpan-testers
effort to test as many new uploads to CPAN as possible. See
http://testers.cpan.org/
Please cc any replies to cpan-testers@perl.org to keep other
test volunteers informed and to prevent any duplicate effort.
--
Dear Sean P. Quinlan,
This is a computer-generated report for CAS-0.89
on perl 5.8.8, created by CPAN-Reporter-1.1556.
Thank you for uploading your work to CPAN. However, there was a problem
testing your distribution.
If you think this report is invalid, please consult the CPAN Testers Wiki
for suggestions on how to avoid getting FAIL reports for missing library
or binary dependencies, unsupported operating systems, and so on:
http://cpantest.grango.org/wiki/CPANAuthorNotes
Sections of this report:
* Tester comments
* Program output
* Prerequisites
* Environment and other context
------------------------------
TESTER COMMENTS
------------------------------
Additional comments from tester:
none provided
------------------------------
PROGRAM OUTPUT
------------------------------
Output from '/usr/bin/make test':
PERL_DL_NONLAZY=1 /usr/local/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
t/00-load................ok
t/01-database............Problem connecting to database: install_driver(mysql) failed: Can't locate DBD/mysql.pm in @INC (@INC contains: /var/.cpan/build/CAS-0.89-mq6fJ7/blib/lib /var/.cpan/build/CAS-0.89-mq6fJ7/blib/arch /var/.cpan/build/CAS-0.89-mq6fJ7/blib/lib /var/.cpan/build/CAS-0.89-mq6fJ7/blib/arch /usr/local/lib/perl5/site_perl/5.8.8 -MDevel::Autoflush /usr/local/lib/perl5/5.8.8/BSDPAN /usr/local/lib/perl5/site_perl/5.8.8/mach /usr/local/lib/perl5/site_perl/5.8.8 /usr/local/lib/perl5/site_perl /usr/local/lib/perl5/5.8.8/mach /usr/local/lib/perl5/5.8.8) at (eval 35) line 3.
Perhaps the DBD::mysql perl module hasn't been fully installed,
or perhaps the capitalisation of 'mysql' isn't right.
Available drivers: DBM, ExampleP, File, Gofer, Proxy, SQLite, Sponge.
at /var/.cpan/build/CAS-0.89-mq6fJ7/blib/lib/CAS/DB.pm line 103
# Looks like your test died before it could output anything.
Dubious, test returned 255 (wstat 65280, 0xff00)
Failed 3/3 subtests
t/02-client..............Problem connecting to database: install_driver(mysql) failed: Can't locate DBD/mysql.pm in @INC (@INC contains: /var/.cpan/build/CAS-0.89-mq6fJ7/blib/lib /var/.cpan/build/CAS-0.89-mq6fJ7/blib/arch /var/.cpan/build/CAS-0.89-mq6fJ7/blib/lib /var/.cpan/build/CAS-0.89-mq6fJ7/blib/arch /usr/local/lib/perl5/site_perl/5.8.8 -MDevel::Autoflush /usr/local/lib/perl5/5.8.8/BSDPAN /usr/local/lib/perl5/site_perl/5.8.8/mach /usr/local/lib/perl5/site_perl/5.8.8 /usr/local/lib/perl5/site_perl /usr/local/lib/perl5/5.8.8/mach /usr/local/lib/perl5/5.8.8) at (eval 44) line 3.
Perhaps the DBD::mysql perl module hasn't been fully installed,
or perhaps the capitalisation of 'mysql' isn't right.
Available drivers: DBM, ExampleP, File, Gofer, Proxy, SQLite, Sponge.
at /var/.cpan/build/CAS-0.89-mq6fJ7/blib/lib/CAS/DB.pm line 103
# Looks like you planned 7 tests but only ran 3.
# Looks like your test died just after 3.
Dubious, test returned 255 (wstat 65280, 0xff00)
Failed 4/7 subtests
t/03-user................Problem connecting to database: install_driver(mysql) failed: Can't locate DBD/mysql.pm in @INC (@INC contains: /var/.cpan/build/CAS-0.89-mq6fJ7/blib/lib /var/.cpan/build/CAS-0.89-mq6fJ7/blib/arch /var/.cpan/build/CAS-0.89-mq6fJ7/blib/lib /var/.cpan/build/CAS-0.89-mq6fJ7/blib/arch /usr/local/lib/perl5/site_perl/5.8.8 -MDevel::Autoflush /usr/local/lib/perl5/5.8.8/BSDPAN /usr/local/lib/perl5/site_perl/5.8.8/mach /usr/local/lib/perl5/site_perl/5.8.8 /usr/local/lib/perl5/site_perl /usr/local/lib/perl5/5.8.8/mach /usr/local/lib/perl5/5.8.8) at (eval 37) line 3.
Perhaps the DBD::mysql perl module hasn't been fully installed,
or perhaps the capitalisation of 'mysql' isn't right.
Available drivers: DBM, ExampleP, File, Gofer, Proxy, SQLite, Sponge.
at /var/.cpan/build/CAS-0.89-mq6fJ7/blib/lib/CAS/DB.pm line 103
# Looks like your test died before it could output anything.
Dubious, test returned 255 (wstat 65280, 0xff00)
Failed 20/20 subtests
t/04-authentication......Problem connecting to database: install_driver(mysql) failed: Can't locate DBD/mysql.pm in @INC (@INC contains: /var/.cpan/build/CAS-0.89-mq6fJ7/blib/lib /var/.cpan/build/CAS-0.89-mq6fJ7/blib/arch /var/.cpan/build/CAS-0.89-mq6fJ7/blib/lib /var/.cpan/build/CAS-0.89-mq6fJ7/blib/arch /usr/local/lib/perl5/site_perl/5.8.8 -MDevel::Autoflush /usr/local/lib/perl5/5.8.8/BSDPAN /usr/local/lib/perl5/site_perl/5.8.8/mach /usr/local/lib/perl5/site_perl/5.8.8 /usr/local/lib/perl5/site_perl /usr/local/lib/perl5/5.8.8/mach /usr/local/lib/perl5/5.8.8) at (eval 37) line 3.
Perhaps the DBD::mysql perl module hasn't been fully installed,
or perhaps the capitalisation of 'mysql' isn't right.
Available drivers: DBM, ExampleP, File, Gofer, Proxy, SQLite, Sponge.
at /var/.cpan/build/CAS-0.89-mq6fJ7/blib/lib/CAS/DB.pm line 103
# Looks like your test died before it could output anything.
Dubious, test returned 255 (wstat 65280, 0xff00)
Failed 7/7 subtests
t/05-authorization.......Problem connecting to database: install_driver(mysql) failed: Can't locate DBD/mysql.pm in @INC (@INC contains: /var/.cpan/build/CAS-0.89-mq6fJ7/blib/lib /var/.cpan/build/CAS-0.89-mq6fJ7/blib/arch /var/.cpan/build/CAS-0.89-mq6fJ7/blib/lib /var/.cpan/build/CAS-0.89-mq6fJ7/blib/arch /usr/local/lib/perl5/site_perl/5.8.8 -MDevel::Autoflush /usr/local/lib/perl5/5.8.8/BSDPAN /usr/local/lib/perl5/site_perl/5.8.8/mach /usr/local/lib/perl5/site_perl/5.8.8 /usr/local/lib/perl5/site_perl /usr/local/lib/perl5/5.8.8/mach /usr/local/lib/perl5/5.8.8) at (eval 37) line 3.
Perhaps the DBD::mysql perl module hasn't been fully installed,
or perhaps the capitalisation of 'mysql' isn't right.
Available drivers: DBM, ExampleP, File, Gofer, Proxy, SQLite, Sponge.
at /var/.cpan/build/CAS-0.89-mq6fJ7/blib/lib/CAS/DB.pm line 103
# Looks like your test died before it could output anything.
Dubious, test returned 255 (wstat 65280, 0xff00)
Failed 28/28 subtests
t/06-administration......skipped: Admin methodology not settled yet
t/boilerplate............couldn't open Changes for reading: No such file or directory at t/boilerplate.t line 9.
# Looks like you planned 6 tests but only ran 1.
# Looks like your test died just after 1.
Dubious, test returned 255 (wstat 65280, 0xff00)
Failed 5/6 subtests
t/pod-coverage...........
# Failed test 'Pod coverage on CAS::DB'
# at /usr/local/lib/perl5/site_perl/5.8.8/Test/Pod/Coverage.pm line 126.
# Coverage for CAS::DB is 66.7%, with 2 naked subroutines:
# err
# errstr
# Failed test 'Pod coverage on CAS::User'
# at /usr/local/lib/perl5/site_perl/5.8.8/Test/Pod/Coverage.pm line 126.
# Coverage for CAS::User is 30.0%, with 14 naked subroutines:
# crypt_pass
# new_user_email
# validate_Address1
# validate_Address2
# validate_City
# validate_Country
# validate_Email
# validate_Firstname
# validate_Lastname
# validate_Password
# validate_Phone
# validate_State
# validate_Username
# validate_Zip
# Failed test 'Pod coverage on CAS::Messaging'
# at /usr/local/lib/perl5/site_perl/5.8.8/Test/Pod/Coverage.pm line 126.
# Coverage for CAS::Messaging is 57.1%, with 3 naked subroutines:
# code_value
# response_code
# response_is
# Failed test 'Pod coverage on CAS::Config'
# at /usr/local/lib/perl5/site_perl/5.8.8/Test/Pod/Coverage.pm line 126.
# Coverage for CAS::Config is 0.0%, with 2 naked subroutines:
# cas_db_connect
# load
# Looks like you failed 4 tests of 5.
Dubious, test returned 4 (wstat 1024, 0x400)
Failed 4/5 subtests
t/pod....................ok
Test Summary Report
-------------------
t/01-database.t (Wstat: 65280 Tests: 0 Failed: 0)
Non-zero exit status: 255
Parse errors: Bad plan. You planned 3 tests but ran 0.
t/02-client.t (Wstat: 65280 Tests: 3 Failed: 0)
Non-zero exit status: 255
Parse errors: Bad plan. You planned 7 tests but ran 3.
t/03-user.t (Wstat: 65280 Tests: 0 Failed: 0)
Non-zero exit status: 255
Parse errors: Bad plan. You planned 20 tests but ran 0.
t/04-authentication.t (Wstat: 65280 Tests: 0 Failed: 0)
Non-zero exit status: 255
Parse errors: Bad plan. You planned 7 tests but ran 0.
t/05-authorization.t (Wstat: 65280 Tests: 0 Failed: 0)
Non-zero exit status: 255
Parse errors: Bad plan. You planned 28 tests but ran 0.
t/boilerplate.t (Wstat: 65280 Tests: 1 Failed: 0)
Non-zero exit status: 255
Parse errors: Bad plan. You planned 6 tests but ran 1.
t/pod-coverage.t (Wstat: 1024 Tests: 5 Failed: 4)
Failed tests: 2-5
Non-zero exit status: 4
Files=10, Tests=19, 12 wallclock secs ( 0.24 usr 0.55 sys + 4.25 cusr 4.83 csys = 9.87 CPU)
Result: FAIL
Failed 7/10 test programs. 4/19 subtests failed.
*** Error code 255
Stop in /var/.cpan/build/CAS-0.89-mq6fJ7.
------------------------------
PREREQUISITES
------------------------------
Prerequisite modules loaded:
requires:
Module Need Have
-------------- ---- --------
Data::Dumper 0 2.121_08
DBI 0 1.604
Digest::MD5 0 2.36
Mail::Sendmail 0.7 0.79
Test::More 0 0.80
YAML 0.35 0.66
------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------
Environment variables:
PATH = /sbin:/bin:/usr/sbin:/usr/bin:/usr/games:/usr/local/sbin:/usr/local/bin:/root/bin
PERL5LIB =
PERL5OPT =
PERL5_CPANPLUS_IS_RUNNING = 63925
PERL5_CPAN_IS_RUNNING = 63925
SHELL = /bin/csh
TERM = cons25
Perl special variables (and OS-specific diagnostics, for MSWin32):
$^X = /usr/local/bin/perl
$UID/$EUID = 0 / 0
$GID = 0 5 0 0
$EGID = 0 5 0 0
Perl module toolchain versions installed:
Module Have
------------------- -------
CPAN 1.92_62
Cwd 3.2701
ExtUtils::CBuilder 0.23
ExtUtils::Command 1.13
ExtUtils::Install 1.45
ExtUtils::MakeMaker 6.44
ExtUtils::Manifest 1.51
ExtUtils::ParseXS n/a
File::Spec 3.2701
Module::Build 0.2808
Module::Signature n/a
Test::Harness 3.10
Test::More 0.80
YAML 0.66
YAML::Syck 1.04
version 0.74
--
Summary of my perl5 (revision 5 version 8 subversion 8) configuration:
Platform:
osname=freebsd, osvers=7.0-release, archname=i386-freebsd-64int
uname='freebsd freebsd.org 7.0-release freebsd 7.0-release #0: fri dec 7 15:51:05 pst 2007 kris@freebsd.org:usrsrcsysmagickernelpath i386 '
config_args='-sde -Dprefix=/usr/local -Darchlib=/usr/local/lib/perl5/5.8.8/mach -Dprivlib=/usr/local/lib/perl5/5.8.8 -Dman3dir=/usr/local/lib/perl5/5.8.8/perl/man/man3 -Dman1dir=/usr/local/man/man1 -Dsitearch=/usr/local/lib/perl5/site_perl/5.8.8/mach -Dsitelib=/usr/local/lib/perl5/site_perl/5.8.8 -Dscriptdir=/usr/local/bin -Dsiteman3dir=/usr/local/lib/perl5/5.8.8/man/man3 -Dsiteman1dir=/usr/local/man/man1 -Ui_malloc -Ui_iconv -Uinstallusrbinperl -Dcc=cc -Duseshrplib -Dccflags=-DAPPLLIB_EXP="/usr/local/lib/perl5/5.8.8/BSDPAN" -Doptimize=-O2 -fno-strict-aliasing -pipe -Ud_dosuid -Ui_gdbm -Dusethreads=n -Dusemymalloc=y -Duse64bitint'
hint=recommended, useposix=true, d_sigaction=define
usethreads=undef use5005threads=undef useithreads=undef usemultiplicity=undef
useperlio=define d_sfio=undef uselargefiles=define usesocks=undef
use64bitint=define use64bitall=undef uselongdouble=undef
usemymalloc=y, bincompat5005=undef
Compiler:
cc='cc', ccflags ='-DAPPLLIB_EXP="/usr/local/lib/perl5/5.8.8/BSDPAN" -DHAS_FPSETMASK -DHAS_FLOATINGPOINT_H -fno-strict-aliasing -pipe -Wdeclaration-after-statement -I/usr/local/include',
optimize='-O2 -fno-strict-aliasing -pipe ',
cppflags='-DAPPLLIB_EXP="/usr/local/lib/perl5/5.8.8/BSDPAN" -DHAS_FPSETMASK -DHAS_FLOATINGPOINT_H -fno-strict-aliasing -pipe -Wdeclaration-after-statement -I/usr/local/include'
ccversion='', gccversion='4.2.1 20070719 [FreeBSD]', gccosandvers=''
intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=12345678
d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=12
ivtype='long long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8
alignbytes=4, prototype=define
Linker and Libraries:
ld='cc', ldflags =' -Wl,-E -L/usr/local/lib'
libpth=/usr/lib /usr/local/lib
libs=-lm -lcrypt -lutil
perllibs=-lm -lcrypt -lutil
libc=, so=so, useshrplib=true, libperl=libperl.so
gnulibc_version=''
Dynamic Linking:
dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags=' -Wl,-R/usr/local/lib/perl5/5.8.8/mach/CORE'
cccdlflags='-DPIC -fPIC', lddlflags='-shared -L/usr/local/lib'
-
FAIL CAS-0.89 i386-freebsd-64int 7.0-release
by stro