Front page | perl.cpan.testers |
Postings from June 2008
FAIL Parse-BBCode-0.06 x86_64-linux-thread-multi-ld 2.6.22.10
Thread Next
From:
imacat
Date:
June 30, 2008 10:58
Subject:
FAIL Parse-BBCode-0.06 x86_64-linux-thread-multi-ld 2.6.22.10
This distribution has been tested as part of the cpan-testers
effort to test as many new uploads to CPAN as possible. See
http://testers.cpan.org/
--
Dear TINITA,
This is a computer-generated error report created automatically by
CPANPLUS, version 0.84. Testers personal comments may appear
at the end of this report.
Thank you for uploading your work to CPAN. However, it appears that
there were some problems testing your distribution.
TEST RESULTS:
Below is the error stack from stage 'make test':
[MSG] [Tue Jul 1 01:56:48 2008] Trying to get 'http://www.cpan.org/authors/id/T/TI/TINITA/CHECKSUMS'
[MSG] [Tue Jul 1 01:56:50 2008] Checksum matches for 'Parse-BBCode-0.06.tar.gz'
[MSG] [Tue Jul 1 01:56:50 2008] Extracted 'Parse-BBCode-0.06/'
[MSG] [Tue Jul 1 01:56:50 2008] Extracted 'Parse-BBCode-0.06/META.yml'
[MSG] [Tue Jul 1 01:56:50 2008] Extracted 'Parse-BBCode-0.06/Makefile.PL'
[MSG] [Tue Jul 1 01:56:50 2008] Extracted 'Parse-BBCode-0.06/lib/'
[MSG] [Tue Jul 1 01:56:50 2008] Extracted 'Parse-BBCode-0.06/lib/Parse/'
[MSG] [Tue Jul 1 01:56:50 2008] Extracted 'Parse-BBCode-0.06/lib/Parse/BBCode.pm'
[MSG] [Tue Jul 1 01:56:50 2008] Extracted 'Parse-BBCode-0.06/lib/Parse/BBCode/'
[MSG] [Tue Jul 1 01:56:50 2008] Extracted 'Parse-BBCode-0.06/lib/Parse/BBCode/XHTML.pm'
[MSG] [Tue Jul 1 01:56:50 2008] Extracted 'Parse-BBCode-0.06/lib/Parse/BBCode/Tag.pm'
[MSG] [Tue Jul 1 01:56:50 2008] Extracted 'Parse-BBCode-0.06/lib/Parse/BBCode/HTML.pm'
[MSG] [Tue Jul 1 01:56:50 2008] Extracted 'Parse-BBCode-0.06/lib/Parse/BBCode/Markdown.pm'
[MSG] [Tue Jul 1 01:56:50 2008] Extracted 'Parse-BBCode-0.06/t/'
[MSG] [Tue Jul 1 01:56:50 2008] Extracted 'Parse-BBCode-0.06/t/08_various_tags.t'
[MSG] [Tue Jul 1 01:56:50 2008] Extracted 'Parse-BBCode-0.06/t/05_balanced.t'
[MSG] [Tue Jul 1 01:56:50 2008] Extracted 'Parse-BBCode-0.06/t/03_pod_cover.t'
[MSG] [Tue Jul 1 01:56:50 2008] Extracted 'Parse-BBCode-0.06/t/04_parse.t'
[MSG] [Tue Jul 1 01:56:50 2008] Extracted 'Parse-BBCode-0.06/t/07_invalid.t'
[MSG] [Tue Jul 1 01:56:50 2008] Extracted 'Parse-BBCode-0.06/t/11_markdown.t'
[MSG] [Tue Jul 1 01:56:50 2008] Extracted 'Parse-BBCode-0.06/t/01_load.t'
[MSG] [Tue Jul 1 01:56:50 2008] Extracted 'Parse-BBCode-0.06/t/09_close_tags.t'
[MSG] [Tue Jul 1 01:56:50 2008] Extracted 'Parse-BBCode-0.06/t/02_pod.t'
[MSG] [Tue Jul 1 01:56:50 2008] Extracted 'Parse-BBCode-0.06/t/10_xhtml.t'
[MSG] [Tue Jul 1 01:56:50 2008] Extracted 'Parse-BBCode-0.06/t/06_unbalanced.t'
[MSG] [Tue Jul 1 01:56:50 2008] Extracted 'Parse-BBCode-0.06/MANIFEST'
[MSG] [Tue Jul 1 01:56:50 2008] Extracted 'Parse-BBCode-0.06/examples/'
[MSG] [Tue Jul 1 01:56:50 2008] Extracted 'Parse-BBCode-0.06/examples/compare.html'
[MSG] [Tue Jul 1 01:56:50 2008] Extracted 'Parse-BBCode-0.06/examples/bench.pl'
[MSG] [Tue Jul 1 01:56:50 2008] Extracted 'Parse-BBCode-0.06/examples/example.pl'
[MSG] [Tue Jul 1 01:56:50 2008] Extracted 'Parse-BBCode-0.06/Build.PL'
[MSG] [Tue Jul 1 01:56:50 2008] Extracted 'Parse-BBCode-0.06/Changes'
[MSG] [Tue Jul 1 01:56:50 2008] Extracted 'Parse-BBCode-0.06/README'
[MSG] [Tue Jul 1 01:56:50 2008] Extracted 'Parse-BBCode-0.06/SIGNATURE'
[MSG] [Tue Jul 1 01:56:50 2008] Extracted 'Parse::BBCode' to '/opt/perl/testers/5.8.8/.cpanplus/5.8.8/build/Parse-BBCode-0.06'
[ERROR] [Tue Jul 1 01:56:50 2008] This module requires 'Module::Build' and 'CPANPLUS::Dist::Build' to be installed, but you don't have it! Will fall back to 'CPANPLUS::Dist::MM', but might not be able to install!
[MSG] [Tue Jul 1 01:56:50 2008] Checking if your kit is complete...
Looks good
Warning: prerequisite Class::Accessor::Fast 0 not found.
Warning: prerequisite Test::NoWarnings 0 not found.
Writing Makefile for Parse::BBCode
[MSG] [Tue Jul 1 01:56:50 2008] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value'
[MSG] [Tue Jul 1 01:56:50 2008] Module 'Parse::BBCode' requires 'Class::Accessor::Fast' version '0' to be installed
[MSG] [Tue Jul 1 01:56:50 2008] Module 'Parse::BBCode' requires 'Test::NoWarnings' version '0' to be installed
[MSG] [Tue Jul 1 01:56:50 2008] Trying to get 'http://www.cpan.org/authors/id/K/KA/KASEI/CHECKSUMS'
[MSG] [Tue Jul 1 01:56:51 2008] Checksum matches for 'Class-Accessor-0.31.tar.gz'
[MSG] [Tue Jul 1 01:56:51 2008] Extracted 'Class-Accessor-0.31/'
[MSG] [Tue Jul 1 01:56:51 2008] Extracted 'Class-Accessor-0.31/t/'
[MSG] [Tue Jul 1 01:56:51 2008] Extracted 'Class-Accessor-0.31/t/croak.t'
[MSG] [Tue Jul 1 01:56:51 2008] Extracted 'Class-Accessor-0.31/t/bestpractice.t'
[MSG] [Tue Jul 1 01:56:51 2008] Extracted 'Class-Accessor-0.31/t/getset.t'
[MSG] [Tue Jul 1 01:56:51 2008] Extracted 'Class-Accessor-0.31/t/aliases.t'
[MSG] [Tue Jul 1 01:56:51 2008] Extracted 'Class-Accessor-0.31/t/accessors.t'
[MSG] [Tue Jul 1 01:56:51 2008] Extracted 'Class-Accessor-0.31/lib/'
[MSG] [Tue Jul 1 01:56:51 2008] Extracted 'Class-Accessor-0.31/lib/Class/'
[MSG] [Tue Jul 1 01:56:51 2008] Extracted 'Class-Accessor-0.31/lib/Class/Accessor/'
[MSG] [Tue Jul 1 01:56:51 2008] Extracted 'Class-Accessor-0.31/lib/Class/Accessor/Faster.pm'
[MSG] [Tue Jul 1 01:56:51 2008] Extracted 'Class-Accessor-0.31/lib/Class/Accessor/Fast.pm'
[MSG] [Tue Jul 1 01:56:52 2008] Extracted 'Class-Accessor-0.31/lib/Class/Accessor.pm'
[MSG] [Tue Jul 1 01:56:52 2008] Extracted 'Class-Accessor-0.31/README'
[MSG] [Tue Jul 1 01:56:52 2008] Extracted 'Class-Accessor-0.31/Changes'
[MSG] [Tue Jul 1 01:56:52 2008] Extracted 'Class-Accessor-0.31/Makefile.PL'
[MSG] [Tue Jul 1 01:56:52 2008] Extracted 'Class-Accessor-0.31/META.yml'
[MSG] [Tue Jul 1 01:56:52 2008] Extracted 'Class-Accessor-0.31/INSTALL'
[MSG] [Tue Jul 1 01:56:52 2008] Extracted 'Class-Accessor-0.31/examples/'
[MSG] [Tue Jul 1 01:56:52 2008] Extracted 'Class-Accessor-0.31/examples/benchmark'
[MSG] [Tue Jul 1 01:56:52 2008] Extracted 'Class-Accessor-0.31/MANIFEST'
[MSG] [Tue Jul 1 01:56:52 2008] Extracted 'Class::Accessor::Fast' to '/opt/perl/testers/5.8.8/.cpanplus/5.8.8/build/Class-Accessor-0.31'
[MSG] [Tue Jul 1 01:56:52 2008] Checking if your kit is complete...
Looks good
Writing Makefile for Class::Accessor
[MSG] [Tue Jul 1 01:56:52 2008] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value'
[MSG] [Tue Jul 1 01:56:52 2008] cp lib/Class/Accessor/Fast.pm blib/lib/Class/Accessor/Fast.pm
cp lib/Class/Accessor/Faster.pm blib/lib/Class/Accessor/Faster.pm
cp lib/Class/Accessor.pm blib/lib/Class/Accessor.pm
Manifying blib/man3/Class::Accessor::Faster.3
Manifying blib/man3/Class::Accessor::Fast.3
Manifying blib/man3/Class::Accessor.3
[MSG] [Tue Jul 1 01:56:53 2008] MAKE TEST passed: t/accessors.......ok
t/aliases.........ok
t/bestpractice....ok
t/croak...........ok
t/getset..........ok
All tests successful.
Files=5, Tests=119, 1 wallclock secs ( 0.05 usr 0.00 sys + 0.21 cusr 0.01 csys = 0.27 CPU)
Result: PASS
[MSG] [Tue Jul 1 01:56:53 2008] Sending test report for 'Class-Accessor-0.31'
[MSG] [Tue Jul 1 01:56:53 2008] Ok, not sending test report
[MSG] [Tue Jul 1 01:56:53 2008] Trying to get 'http://www.cpan.org/authors/id/F/FD/FDALY/CHECKSUMS'
[MSG] [Tue Jul 1 01:56:55 2008] Checksum matches for 'Test-NoWarnings-0.084.tar.gz'
[MSG] [Tue Jul 1 01:56:55 2008] Extracted 'Test-NoWarnings-0.084/'
[MSG] [Tue Jul 1 01:56:55 2008] Extracted 'Test-NoWarnings-0.084/Makefile.PL'
[MSG] [Tue Jul 1 01:56:55 2008] Extracted 'Test-NoWarnings-0.084/README'
[MSG] [Tue Jul 1 01:56:55 2008] Extracted 'Test-NoWarnings-0.084/MANIFEST'
[MSG] [Tue Jul 1 01:56:55 2008] Extracted 'Test-NoWarnings-0.084/CHANGES'
[MSG] [Tue Jul 1 01:56:55 2008] Extracted 'Test-NoWarnings-0.084/lib/'
[MSG] [Tue Jul 1 01:56:55 2008] Extracted 'Test-NoWarnings-0.084/lib/Test/'
[MSG] [Tue Jul 1 01:56:55 2008] Extracted 'Test-NoWarnings-0.084/lib/Test/NoWarnings.pm'
[MSG] [Tue Jul 1 01:56:55 2008] Extracted 'Test-NoWarnings-0.084/lib/Test/NoWarnings/'
[MSG] [Tue Jul 1 01:56:55 2008] Extracted 'Test-NoWarnings-0.084/lib/Test/NoWarnings/Warning.pm'
[MSG] [Tue Jul 1 01:56:55 2008] Extracted 'Test-NoWarnings-0.084/LGPL'
[MSG] [Tue Jul 1 01:56:55 2008] Extracted 'Test-NoWarnings-0.084/META.yml'
[MSG] [Tue Jul 1 01:56:55 2008] Extracted 'Test-NoWarnings-0.084/t/'
[MSG] [Tue Jul 1 01:56:55 2008] Extracted 'Test-NoWarnings-0.084/t/none.t'
[MSG] [Tue Jul 1 01:56:55 2008] Extracted 'Test-NoWarnings-0.084/t/no_end.t'
[MSG] [Tue Jul 1 01:56:55 2008] Extracted 'Test-NoWarnings-0.084/t/end.t'
[MSG] [Tue Jul 1 01:56:55 2008] Extracted 'Test-NoWarnings-0.084/t/fork.t'
[MSG] [Tue Jul 1 01:56:55 2008] Extracted 'Test-NoWarnings-0.084/t/no_tests.t'
[MSG] [Tue Jul 1 01:56:55 2008] Extracted 'Test::NoWarnings' to '/opt/perl/testers/5.8.8/.cpanplus/5.8.8/build/Test-NoWarnings-0.084'
[MSG] [Tue Jul 1 01:56:55 2008] Checking if your kit is complete...
Looks good
Warning: prerequisite Test::Tester 0.103 not found.
Writing Makefile for Test::NoWarnings
[MSG] [Tue Jul 1 01:56:55 2008] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value'
[MSG] [Tue Jul 1 01:56:55 2008] Module 'Test::NoWarnings' requires 'Test::Tester' version '0.103' to be installed
[MSG] [Tue Jul 1 01:56:55 2008] Trying to get 'http://www.cpan.org/authors/id/F/FD/FDALY/CHECKSUMS'
[MSG] [Tue Jul 1 01:56:57 2008] Checksum matches for 'Test-Tester-0.107.tar.gz'
[MSG] [Tue Jul 1 01:56:57 2008] Extracted 'Test-Tester-0.107/'
[MSG] [Tue Jul 1 01:56:57 2008] Extracted 'Test-Tester-0.107/ARTISTIC'
[MSG] [Tue Jul 1 01:56:57 2008] Extracted 'Test-Tester-0.107/Makefile.PL'
[MSG] [Tue Jul 1 01:56:57 2008] Extracted 'Test-Tester-0.107/README'
[MSG] [Tue Jul 1 01:56:57 2008] Extracted 'Test-Tester-0.107/MANIFEST'
[MSG] [Tue Jul 1 01:56:57 2008] Extracted 'Test-Tester-0.107/CHANGES'
[MSG] [Tue Jul 1 01:56:57 2008] Extracted 'Test-Tester-0.107/TODO'
[MSG] [Tue Jul 1 01:56:57 2008] Extracted 'Test-Tester-0.107/lib/'
[MSG] [Tue Jul 1 01:56:57 2008] Extracted 'Test-Tester-0.107/lib/Test/'
[MSG] [Tue Jul 1 01:56:57 2008] Extracted 'Test-Tester-0.107/lib/Test/Tester.pm'
[MSG] [Tue Jul 1 01:56:57 2008] Extracted 'Test-Tester-0.107/lib/Test/Tester/'
[MSG] [Tue Jul 1 01:56:57 2008] Extracted 'Test-Tester-0.107/lib/Test/Tester/Delegate.pm'
[MSG] [Tue Jul 1 01:56:57 2008] Extracted 'Test-Tester-0.107/lib/Test/Tester/CaptureRunner.pm'
[MSG] [Tue Jul 1 01:56:57 2008] Extracted 'Test-Tester-0.107/lib/Test/Tester/Capture.pm'
[MSG] [Tue Jul 1 01:56:57 2008] Extracted 'Test-Tester-0.107/META.yml'
[MSG] [Tue Jul 1 01:56:57 2008] Extracted 'Test-Tester-0.107/t/'
[MSG] [Tue Jul 1 01:56:57 2008] Extracted 'Test-Tester-0.107/t/MyTest.pm'
[MSG] [Tue Jul 1 01:56:57 2008] Extracted 'Test-Tester-0.107/t/run_test.t'
[MSG] [Tue Jul 1 01:56:57 2008] Extracted 'Test-Tester-0.107/t/SmallTest.pm'
[MSG] [Tue Jul 1 01:56:57 2008] Extracted 'Test-Tester-0.107/t/capture.t'
[MSG] [Tue Jul 1 01:56:57 2008] Extracted 'Test-Tester-0.107/t/auto.t'
[MSG] [Tue Jul 1 01:56:57 2008] Extracted 'Test-Tester-0.107/t/check_tests.t'
[MSG] [Tue Jul 1 01:56:57 2008] Extracted 'Test-Tester-0.107/t/fail/'
[MSG] [Tue Jul 1 01:56:57 2008] Extracted 'Test-Tester-0.107/t/fail/fail.t'
[MSG] [Tue Jul 1 01:56:57 2008] Extracted 'Test-Tester-0.107/t/depth.t'
[MSG] [Tue Jul 1 01:56:57 2008] Extracted 'Test::Tester' to '/opt/perl/testers/5.8.8/.cpanplus/5.8.8/build/Test-Tester-0.107'
[MSG] [Tue Jul 1 01:56:57 2008] Checking if your kit is complete...
Looks good
Writing Makefile for Test::Tester
[MSG] [Tue Jul 1 01:56:57 2008] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value'
[MSG] [Tue Jul 1 01:56:58 2008] cp lib/Test/Tester.pm blib/lib/Test/Tester.pm
cp lib/Test/Tester/Capture.pm blib/lib/Test/Tester/Capture.pm
cp lib/Test/Tester/CaptureRunner.pm blib/lib/Test/Tester/CaptureRunner.pm
cp lib/Test/Tester/Delegate.pm blib/lib/Test/Tester/Delegate.pm
Manifying blib/man3/Test::Tester::Capture.3
Manifying blib/man3/Test::Tester.3
Manifying blib/man3/Test::Tester::CaptureRunner.3
[MSG] [Tue Jul 1 01:56:58 2008] MAKE TEST passed: t/auto...........ok
t/capture........ok
t/check_tests....ok
t/depth..........ok
t/run_test.......ok
All tests successful.
Files=5, Tests=169, 0 wallclock secs ( 0.07 usr 0.00 sys + 0.25 cusr 0.04 csys = 0.36 CPU)
Result: PASS
[MSG] [Tue Jul 1 01:56:58 2008] Sending test report for 'Test-Tester-0.107'
[MSG] [Tue Jul 1 01:56:58 2008] Ok, not sending test report
[MSG] [Tue Jul 1 01:56:59 2008] cp lib/Test/NoWarnings.pm blib/lib/Test/NoWarnings.pm
cp lib/Test/NoWarnings/Warning.pm blib/lib/Test/NoWarnings/Warning.pm
Manifying blib/man3/Test::NoWarnings.3
[MSG] [Tue Jul 1 01:56:59 2008] MAKE TEST passed: t/end.........ok
t/fork........ok
t/no_end......ok
t/no_tests....ok
t/none........ok
All tests successful.
Files=5, Tests=42, 0 wallclock secs ( 0.04 usr 0.00 sys + 0.19 cusr 0.04 csys = 0.27 CPU)
Result: PASS
[MSG] [Tue Jul 1 01:56:59 2008] Sending test report for 'Test-NoWarnings-0.084'
[MSG] [Tue Jul 1 01:56:59 2008] Ok, not sending test report
[MSG] [Tue Jul 1 01:57:00 2008] cp lib/Parse/BBCode/XHTML.pm blib/lib/Parse/BBCode/XHTML.pm
cp lib/Parse/BBCode/Markdown.pm blib/lib/Parse/BBCode/Markdown.pm
cp lib/Parse/BBCode/HTML.pm blib/lib/Parse/BBCode/HTML.pm
cp lib/Parse/BBCode.pm blib/lib/Parse/BBCode.pm
cp lib/Parse/BBCode/Tag.pm blib/lib/Parse/BBCode/Tag.pm
Manifying blib/man3/Parse::BBCode::Markdown.3
Manifying blib/man3/Parse::BBCode::XHTML.3
Manifying blib/man3/Parse::BBCode::HTML.3
Manifying blib/man3/Parse::BBCode::Tag.3
Manifying blib/man3/Parse::BBCode.3
[ERROR] [Tue Jul 1 01:57:01 2008] MAKE TEST failed: ¤£§Æ±æªº¸Ë¸m¿é¥X¤J±±¨î (ioctl) t/01_load............ok
t/02_pod.............ok
t/03_pod_cover.......You tried to run a test without a plan at /opt/perl/testers/5.8.8/.cpanplus/5.8.8/build/Test-NoWarnings-0.084/blib/lib/Test/NoWarnings.pm line 45.
END failed--call queue aborted.
skipped: Test::Pod::Coverage required for testing pod coverage
t/04_parse...........ok
t/05_balanced........ok
t/06_unbalanced......ok
t/07_invalid.........ok
t/08_various_tags....ok
t/09_close_tags......ok
t/10_xhtml...........ok
t/11_markdown........ok
Test Summary Report
-------------------
t/03_pod_cover (Wstat: 512 Tests: 0 Failed: 0)
Non-zero exit status: 2
Files=11, Tests=129, 1 wallclock secs ( 0.07 usr 0.00 sys + 0.68 cusr 0.12 csys = 0.87 CPU)
Result: FAIL
Failed 1/11 test programs. 0/129 subtests failed.
make: *** [test_dynamic] Error 255
[MSG] [Tue Jul 1 01:57:01 2008] DEFAULT 'proceed_on_test_failure' HANDLER RETURNING 'sub return value'
PREREQUISITES:
Here is a list of prerequisites you specified and versions we
managed to load:
Module Name Have Want
Carp 1.04 0
Class::Accessor::Fast 0.31 0
Data::Dumper 2.121_08 0
Test::More 0.80 0
Test::NoWarnings 0.084 0
URI::Escape 3.29 0
strict 1.03 0
warnings 1.05 0
******************************** NOTE ********************************
The comments above are created mechanically, possibly without manual
checking by the sender. As there are many people performing automatic
tests on each upload to CPAN, it is likely that you will receive
identical messages about the same problem.
If you believe that the message is mistaken, please reply to the first
one with correction and/or additional informations, and do not take
it personally. We appreciate your patience. :)
**********************************************************************
Additional comments:
This report was machine-generated by CPAN::YACSmoke 0.0307.
--
Summary of my perl5 (revision 5 version 8 subversion 8) configuration:
Platform:
osname=linux, osvers=2.6.22.10, archname=x86_64-linux-thread-multi-ld
uname='linux rinse 2.6.22.10 #1 smp tue nov 20 02:36:22 cst 2007 x86_64 gnulinux '
config_args='-d -Dprefix=/opt/perl/testers/5.8.8 -Dusethreads -Dcc=gcc -Duselongdouble -Doptimize=-g -O3 -Dd_dosuid -Dinc_version_list=none -Acccdlflags=-fPIC -Duseshrplib=true -Dcf_email=imacat@mail.imacat.idv.tw'
hint=recommended, useposix=true, d_sigaction=define
usethreads=define use5005threads=undef useithreads=define usemultiplicity=define
useperlio=define d_sfio=undef uselargefiles=define usesocks=undef
use64bitint=define use64bitall=define uselongdouble=define
usemymalloc=n, bincompat5005=undef
Compiler:
cc='gcc', ccflags ='-D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS -DDEBUGGING -fno-strict-aliasing -pipe -Wdeclaration-after-statement -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64',
optimize='-g -O3',
cppflags='-D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS -DDEBUGGING -fno-strict-aliasing -pipe -Wdeclaration-after-statement -I/usr/local/include'
ccversion='', gccversion='4.1.2 20061115 (prerelease) (Debian 4.1.1-21)', gccosandvers=''
intsize=4, longsize=8, ptrsize=8, doublesize=8, byteorder=12345678
d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=16
ivtype='long', ivsize=8, nvtype='long double', nvsize=16, Off_t='off_t', lseeksize=8
alignbytes=16, prototype=define
Linker and Libraries:
ld='gcc', ldflags =' -L/usr/local/lib'
libpth=/usr/local/lib /lib /usr/lib
libs=-lnsl -lgdbm -ldb -ldl -lm -lcrypt -lutil -lpthread -lc
perllibs=-lnsl -ldl -lm -lcrypt -lutil -lpthread -lc
libc=/lib/libc-2.3.6.so, so=so, useshrplib=true, libperl=libperl.so
gnulibc_version='2.3.6'
Dynamic Linking:
dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E -Wl,-rpath,/opt/perl/testers/5.8.8/lib/5.8.8/x86_64-linux-thread-multi-ld/CORE'
cccdlflags=' -fPIC', lddlflags='-shared -L/usr/local/lib'
Thread Next