FAIL TAP-Harness-Archive-0.10 i686-linux-thread-multi-64int 2.6.14

This distribution has been tested as part of the cpan-testers
effort to test as many new uploads to CPAN as possible.  See
http://testers.cpan.org/


--
Dear Michael Peters,
    
This is a computer-generated report for TAP-Harness-Archive-0.10
on perl 5.8.7, created by CPAN-Reporter-1.16. 

Thank you for uploading your work to CPAN.  However, there was a problem
testing your distribution.

If you think this report is invalid, please consult the CPAN Testers Wiki
for suggestions on how to avoid getting FAIL reports for missing library
or binary dependencies, unsupported operating systems, and so on:

http://cpantest.grango.org/wiki/CPANAuthorNotes

Sections of this report:

    * Tester comments
    * Program output
    * Prerequisites
    * Environment and other context

------------------------------
TESTER COMMENTS
------------------------------

Additional comments from tester: 

this report is from an automated smoke testing program
and was not reviewed by a human for accuracy

------------------------------
PROGRAM OUTPUT
------------------------------

Output from '/usr/bin/make test':

PERL_DL_NONLAZY=1 /home/src/perl/repoperls/installed-perls/maint-5.8/pbyWflA/perl-5.8.0@26727/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
t/archive.............cannot remove path when cwd is /tmp/MtADvBDL3Y for /tmp/MtADvBDL3Y:  at /home/src/perl/repoperls/installed-perls/maint-5.8/pbyWflA/perl-5.8.0@26727/lib/site_perl/5.8.7/TAP/Harness/Archive.pm line 147
Use of uninitialized value in -e at t/archive.t line 42.

#   Failed test 'full path file exists'
#   at t/archive.t line 42.
Use of uninitialized value in pattern match (m//) at /home/src/perl/repoperls/installed-perls/maint-5.8/pbyWflA/perl-5.8.0@26727/lib/5.8.7/i686-linux-thread-multi-64int/File/Spec/Unix.pm line 207.

#   Failed test 'full path is absolute'
#   at t/archive.t line 43.
Use of uninitialized value in -e at t/archive.t line 42.

#   Failed test 'full path file exists'
#   at t/archive.t line 42.
Use of uninitialized value in pattern match (m//) at /home/src/perl/repoperls/installed-perls/maint-5.8/pbyWflA/perl-5.8.0@26727/lib/5.8.7/i686-linux-thread-multi-64int/File/Spec/Unix.pm line 207.

#   Failed test 'full path is absolute'
#   at t/archive.t line 43.
cannot remove path when cwd is /tmp/i1_m5LGiFa for /tmp/i1_m5LGiFa:  at /home/src/perl/repoperls/installed-perls/maint-5.8/pbyWflA/perl-5.8.0@26727/lib/site_perl/5.8.7/TAP/Harness/Archive.pm line 272
cannot remove path when cwd is /tmp/7A2_PmlPGf for /tmp/7A2_PmlPGf:  at /home/src/perl/repoperls/installed-perls/maint-5.8/pbyWflA/perl-5.8.0@26727/lib/site_perl/5.8.7/TAP/Harness/Archive.pm line 147
Use of uninitialized value in -e at t/archive.t line 42.

#   Failed test 'full path file exists'
#   at t/archive.t line 42.
Use of uninitialized value in pattern match (m//) at /home/src/perl/repoperls/installed-perls/maint-5.8/pbyWflA/perl-5.8.0@26727/lib/5.8.7/i686-linux-thread-multi-64int/File/Spec/Unix.pm line 207.

#   Failed test 'full path is absolute'
#   at t/archive.t line 43.
Use of uninitialized value in -e at t/archive.t line 42.

#   Failed test 'full path file exists'
#   at t/archive.t line 42.
Use of uninitialized value in pattern match (m//) at /home/src/perl/repoperls/installed-perls/maint-5.8/pbyWflA/perl-5.8.0@26727/lib/5.8.7/i686-linux-thread-multi-64int/File/Spec/Unix.pm line 207.

#   Failed test 'full path is absolute'
#   at t/archive.t line 43.
cannot remove path when cwd is /tmp/I2HSabuJ4A for /tmp/I2HSabuJ4A:  at /home/src/perl/repoperls/installed-perls/maint-5.8/pbyWflA/perl-5.8.0@26727/lib/site_perl/5.8.7/TAP/Harness/Archive.pm line 272
# Looks like you failed 8 tests of 42.
 Dubious, test returned 8 (wstat 2048, 0x800)
 Failed 8/42 subtests 
t/bar.................ok
t/extra_files.........Unknown arguments to TAP::Harness::new (extra_files) at t/extra_files.t line 20
# Looks like your test died before it could output anything.
 Dubious, test returned 255 (wstat 65280, 0xff00)
 Failed 10/10 subtests 
t/extra_properties....Unknown arguments to TAP::Harness::new (extra_properties) at t/extra_properties.t line 23
# Looks like your test died before it could output anything.
 Dubious, test returned 255 (wstat 65280, 0xff00)
 Failed 5/5 subtests 
t/foo.................ok
t/pod-coverage........ok
t/pod.................ok

Test Summary Report
-------------------
t/archive         (Wstat: 2048 Tests: 42 Failed: 8)
  Failed tests:  8-9, 11-12, 28-29, 31-32
  Non-zero exit status: 8
t/extra_files     (Wstat: 65280 Tests: 0 Failed: 0)
  Non-zero exit status: 255
  Parse errors: Bad plan.  You planned 10 tests but ran 0.
t/extra_properties (Wstat: 65280 Tests: 0 Failed: 0)
  Non-zero exit status: 255
  Parse errors: Bad plan.  You planned 5 tests but ran 0.
Files=7, Tests=49,  5 wallclock secs ( 0.07 usr  0.01 sys +  2.00 cusr  0.28 csys =  2.36 CPU)
Result: FAIL
Failed 3/7 test programs. 8/49 subtests failed.
make: *** [test_dynamic] Fehler 255

------------------------------
PREREQUISITES
------------------------------

Prerequisite modules loaded:

requires:

    Module         Need Have   
    -------------- ---- -------
    Archive::Tar   0    1.38   
    Cwd            0    3.2701 
    File::Basename 0    2.74   
    File::Find     0    1.10   
    File::Path     0    2.06_04
    File::Spec     0    3.2701 
    File::Temp     0    0.20   
    TAP::Harness   3.05 3.12   
    Test::More     0    0.80   
    YAML::Tiny     0    1.32   

------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------

Environment variables:

    AUTOMATED_TESTING = 1
    LANG = de_DE.UTF-8
    PATH = /usr/lib/ccache:/home/sand/bin:/usr/local/bin:/usr/bin:/bin:/usr/bin/X11:/usr/games:/usr/local/perl/bin:/usr/X11/bin:/sbin:/usr/sbin
    PERL5LIB = 
    PERL5OPT = 
    PERL5_CPANPLUS_IS_RUNNING = 309
    PERL5_CPAN_IS_RUNNING = 309
    PERL_MM_USE_DEFAULT = 1
    SHELL = /usr/bin/zsh
    TERM = screen

Perl special variables (and OS-specific diagnostics, for MSWin32):

    $^X = /home/src/perl/repoperls/installed-perls/maint-5.8/pbyWflA/perl-5.8.0@26727/bin/perl
    $UID/$EUID = 1005 / 1005
    $GID = 1005 1005
    $EGID = 1005 1005

Perl module toolchain versions installed:

    Module              Have   
    ------------------- -------
    CPAN                1.92_63
    Cwd                 3.2701 
    ExtUtils::CBuilder  0.23   
    ExtUtils::Command   1.14   
    ExtUtils::Install   1.50   
    ExtUtils::MakeMaker 6.44   
    ExtUtils::Manifest  1.54   
    ExtUtils::ParseXS   2.19   
    File::Spec          3.2701 
    Module::Build       0.2808 
    Module::Signature   0.55   
    Test::Harness       3.12   
    Test::More          0.80   
    YAML                0.66   
    YAML::Syck          1.05   
    version             0.7501 


--

Summary of my perl5 (revision 5 version 8 subversion 7) configuration:
  Platform:
    osname=linux, osvers=2.6.14, archname=i686-linux-thread-multi-64int
    uname='linux k75 2.6.14 #1 fri jan 27 16:22:47 cet 2006 i686 gnulinux '
    config_args='-Dprefix=/home/src/perl/repoperls/installed-perls/maint-5.8/pbyWflA/perl-5.8.0@26727 -Dinstallusrbinperl=n -Uversiononly -des -Duse64bitint -Dusedevel -Dusethreads'
    hint=recommended, useposix=true, d_sigaction=define
    usethreads=define use5005threads=undef useithreads=define usemultiplicity=define
    useperlio=define d_sfio=undef uselargefiles=define usesocks=undef
    use64bitint=define use64bitall=undef uselongdouble=undef
    usemymalloc=n, bincompat5005=undef
  Compiler:
    cc='cc', ccflags ='-D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS -fno-strict-aliasing -pipe -Wdeclaration-after-statement -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64',
    optimize='-O2',
    cppflags='-D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS -fno-strict-aliasing -pipe -Wdeclaration-after-statement -I/usr/local/include'
    ccversion='', gccversion='4.0.3 20060115 (prerelease) (Debian 4.0.2-7)', gccosandvers=''
    intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=12345678
    d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=12
    ivtype='long long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8
    alignbytes=4, prototype=define
  Linker and Libraries:
    ld='cc', ldflags =' -L/usr/local/lib'
    libpth=/usr/local/lib /lib /usr/lib
    libs=-lnsl -lgdbm -ldb -ldl -lm -lcrypt -lutil -lpthread -lc
    perllibs=-lnsl -ldl -lm -lcrypt -lutil -lpthread -lc
    libc=/lib/libc-2.3.5.so, so=so, useshrplib=false, libperl=libperl.a
    gnulibc_version='2.3.5'
  Dynamic Linking:
    dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E'
    cccdlflags='-fpic', lddlflags='-shared -L/usr/local/lib'

• FAIL TAP-Harness-Archive-0.10 i686-linux-thread-multi-64int 2.6.14 by andreas.koenig.gmwojprw