develooper Front page | perl.cpan.testers | Postings from July 2008

FAIL IPC-Cmd-0.41_02 darwin-thread-multi-64int 8.10.0

From:
chris
Date:
July 5, 2008 17:19
Subject:
FAIL IPC-Cmd-0.41_02 darwin-thread-multi-64int 8.10.0
This distribution has been tested as part of the cpan-testers
effort to test as many new uploads to CPAN as possible.  See
http://testers.cpan.org/


--

Dear KANE,
    
This is a computer-generated error report created automatically by
CPANPLUS, version 0.84. Testers personal comments may appear 
at the end of this report.


Thank you for uploading your work to CPAN.  However, it appears that
there were some problems testing your distribution.

TEST RESULTS:

Below is the error stack from stage 'make test':

[MSG] [Sun Jul  6 01:18:35 2008] Extracted 'IPC-Cmd-0.41_02/'
[MSG] [Sun Jul  6 01:18:35 2008] Extracted 'IPC-Cmd-0.41_02/CHANGES'
[MSG] [Sun Jul  6 01:18:35 2008] Extracted 'IPC-Cmd-0.41_02/lib/'
[MSG] [Sun Jul  6 01:18:35 2008] Extracted 'IPC-Cmd-0.41_02/lib/IPC/'
[MSG] [Sun Jul  6 01:18:35 2008] Extracted 'IPC-Cmd-0.41_02/lib/IPC/Cmd.pm'
[MSG] [Sun Jul  6 01:18:35 2008] Extracted 'IPC-Cmd-0.41_02/Makefile.PL'
[MSG] [Sun Jul  6 01:18:35 2008] Extracted 'IPC-Cmd-0.41_02/MANIFEST'
[MSG] [Sun Jul  6 01:18:35 2008] Extracted 'IPC-Cmd-0.41_02/META.yml'
[MSG] [Sun Jul  6 01:18:35 2008] Extracted 'IPC-Cmd-0.41_02/README'
[MSG] [Sun Jul  6 01:18:35 2008] Extracted 'IPC-Cmd-0.41_02/t/'
[MSG] [Sun Jul  6 01:18:35 2008] Extracted 'IPC-Cmd-0.41_02/t/01_IPC-Cmd.t'
[MSG] [Sun Jul  6 01:18:35 2008] Extracted 'IPC-Cmd-0.41_02/t/02_Interactive.t'
[MSG] [Sun Jul  6 01:18:35 2008] Extracted 'IPC-Cmd-0.41_02/t/src/'
[MSG] [Sun Jul  6 01:18:35 2008] Extracted 'IPC-Cmd-0.41_02/t/src/child.pl'
[MSG] [Sun Jul  6 01:18:35 2008] Extracted 'IPC::Cmd' to '/Volumes/Media/smoke/perl562/.cpanplus/5.6.2/build/IPC-Cmd-0.41_02'
[MSG] [Sun Jul  6 01:18:36 2008] Checking if your kit is complete...
Looks good
Writing Makefile for IPC::Cmd

[MSG] [Sun Jul  6 01:18:36 2008] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value'
[MSG] [Sun Jul  6 01:18:38 2008] cp lib/IPC/Cmd.pm blib/lib/IPC/Cmd.pm
Manifying blib/man3/IPC::Cmd.3

[ERROR] [Sun Jul  6 01:18:45 2008] MAKE TEST failed:  PERL_DL_NONLAZY=1 /Volumes/Media/smoke/perl562/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
t/01_IPC-Cmd........Use of uninitialized value in concatenation (.) or string at ../lib/IPC/Cmd.pm line 641.
Could not dup 'STDIN': Invalid argument at t/01_IPC-Cmd.t line 143
Use of uninitialized value in numeric ne (!=) at /Volumes/Media/smoke/perl562/lib/5.6.2/IPC/Open3.pm line 203.
Use of uninitialized value in numeric ne (!=) at /Volumes/Media/smoke/perl562/lib/5.6.2/IPC/Open3.pm line 203.

#   Failed test '   Error object isa IPC::Cmd::TimeOut'
#   at t/01_IPC-Cmd.t line 146.
#        Error object isn't a reference

#   Failed test '   Error object isa IPC::Cmd::TimeOut'
#   at t/01_IPC-Cmd.t line 146.
#        Error object isn't a reference
# Looks like you failed 1 test of 287.
 Dubious, test returned 1 (wstat 256, 0x100)
 Failed -1/287 subtests 
	(less 56 skipped subtests: 232 okay)
t/02_Interactive....skipped: No interactive tests from harness

Test Summary Report
-------------------
t/01_IPC-Cmd    (Wstat: 256 Tests: 293 Failed: 5)
  Failed tests:  284, 284-287
  Non-zero exit status: 1
  Parse errors: Tests out of sequence.  Found (282) but expected (285)
                Tests out of sequence.  Found (283) but expected (286)
                Tests out of sequence.  Found (284) but expected (287)
                Tests out of sequence.  Found (285) but expected (288)
                Tests out of sequence.  Found (286) but expected (289)
Displayed the first 5 of 11 TAP syntax errors.
Re-run prove with the -p option to see them all.
Files=2, Tests=293,  6 wallclock secs ( 0.35 usr  0.06 sys +  1.53 cusr  1.49 csys =  3.43 CPU)
Result: FAIL
Failed 1/2 test programs. 5/293 subtests failed.
make: *** [test_dynamic] Error 35

[MSG] [Sun Jul  6 01:18:45 2008] DEFAULT 'proceed_on_test_failure' HANDLER RETURNING 'sub return value'

PREREQUISITES:

Here is a list of prerequisites you specified and versions we 
managed to load:
                                
	  Module Name                        Have     Want
	  Locale::Maketext::Simple           0.18        0
	  Module::Load::Conditional          0.26        0
	  Params::Check                      0.26     0.20
	  Test::More                         0.80        0

******************************** NOTE ********************************
The comments above are created mechanically, possibly without manual
checking by the sender.  As there are many people performing automatic
tests on each upload to CPAN, it is likely that you will receive 
identical messages about the same problem.

If you believe that the message is mistaken, please reply to the first
one with correction and/or additional informations, and do not take
it personally.  We appreciate your patience. :)
**********************************************************************

Additional comments:
 

This report was machine-generated by CPAN::YACSmoke 3.07e-02. Powered by POE::Component::CPAN::YACSmoke.

------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------

Environment variables:

    AUTOMATED_TESTING = 1
    PATH = /bin:/sbin:/usr/bin:/usr/sbin:/usr/local/bin:/usr/local/sbin
    PERL5LIB = :/Volumes/Media/smoke/perl562/.cpanplus/5.6.2/build/IPC-Cmd-0.41_02/blib/lib:/Volumes/Media/smoke/perl562/.cpanplus/5.6.2/build/IPC-Cmd-0.41_02/blib/arch:/Volumes/Media/smoke/perl562/.cpanplus/5.6.2/build/IPC-Cmd-0.41_02/blib
    PERL5_CPANPLUS_IS_EXECUTING = 
    PERL5_CPANPLUS_IS_RUNNING = 6973
    PERL5_CPANPLUS_IS_VERSION = 0.84
    PERL_MM_USE_DEFAULT = 1
    SHELL = /bin/bash
    TERM = screen

Perl special variables (and OS-specific diagnostics, for MSWin32):

    Perl: $^X = /Volumes/Media/smoke/perl562/bin/perl
    UID:  $<  = 502
    EUID: $>  = 502
    GID:  $(  = 502 502
    EGID: $)  = 502 502


-------------------------------


--

Summary of my perl5 (revision 5.0 version 6 subversion 2) configuration:
  Platform:
    osname=darwin, osvers=8.10.0, archname=darwin-thread-multi-64int
    uname='darwin afalglas.bingosnet.co.uk 8.10.0 darwin kernel version 8.10.0: wed may 23 16:50:59 pdt 2007; root:xnu-792.21.3~1release_ppc power macintosh powerpc '
    config_args='-e -Dprefix=/Volumes/Media/smoke/perl562 -Duse64bitint'
    hint=recommended, useposix=true, d_sigaction=define
    usethreads=define use5005threads=undef useithreads=define usemultiplicity=define
    useperlio=undef d_sfio=undef uselargefiles=define usesocks=undef
    use64bitint=define use64bitall=undef uselongdouble=undef
  Compiler:
    cc='cc', ccflags ='-pipe -fno-common -DPERL_DARWIN -no-cpp-precomp -fno-strict-aliasing -I/usr/local/include',
    optimize='-O3',
    cppflags='-pipe -fno-common -DPERL_DARWIN -no-cpp-precomp -fno-strict-aliasing -I/usr/local/include'
    ccversion='', gccversion='4.0.1 (Apple Computer, Inc. build 5367)', gccosandvers=''
    intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=87654321
    d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=16
    ivtype='long long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8
    alignbytes=8, usemymalloc=n, prototype=define
  Linker and Libraries:
    ld='env MACOSX_DEPLOYMENT_TARGET=10.3 cc', ldflags =' -L/usr/local/lib'
    libpth=/usr/local/lib /usr/lib
    libs=-ldbm -ldl -lm -lc
    perllibs=-ldl -lm -lc
    libc=/usr/lib/libc.dylib, so=dylib, useshrplib=false, libperl=libperl.a
  Dynamic Linking:
    dlsrc=dl_dyld.xs, dlext=bundle, d_dlsymun=undef, ccdlflags=' '
    cccdlflags=' ', lddlflags=' -bundle -undefined dynamic_lookup -L/usr/local/lib'



Comments to Ask Bjørn Hansen at ask@perl.org | Group listing | About