Front page | perl.cpan.testers |
Postings from July 2008
FAIL List-MoreUtils-0.22 OpenBSD.i386-openbsd-thread-multi-64int 4.3
Thread Next
From:
chris
Date:
July 31, 2008 07:39
Subject:
FAIL List-MoreUtils-0.22 OpenBSD.i386-openbsd-thread-multi-64int 4.3
This distribution has been tested as part of the cpan-testers
effort to test as many new uploads to CPAN as possible. See
http://testers.cpan.org/
--
Dear Tassilo von Parseval,
This is a computer-generated error report created automatically by
CPANPLUS, version 0.84. Testers personal comments may appear
at the end of this report.
Thank you for uploading your work to CPAN. However, it appears that
there were some problems testing your distribution.
TEST RESULTS:
Below is the error stack from stage 'make test':
[MSG] [Thu Jul 31 15:09:11 2008] Found config 'CPANPLUS::Config::User'
[MSG] [Thu Jul 31 15:09:11 2008] Loading config 'CPANPLUS::Config::User'
[MSG] [Thu Jul 31 15:09:11 2008] Loaded 'CPANPLUS::Config::User' (/home/cpan/pit/rel/perl5.10.0/.cpanplus/lib/CPANPLUS/Config/User.pm)
[MSG] [Thu Jul 31 15:09:11 2008] Checking if source files are up to date
[MSG] [Thu Jul 31 15:09:11 2008] Retrieving /home/cpan/pit/rel/perl5.10.0/.cpanplus/sourcefiles.2.18.stored
[MSG] [Thu Jul 31 15:09:15 2008] No '/home/cpan/pit/rel/perl5.10.0/.cpanplus/custom-sources' dir, skipping custom sources
[MSG] [Thu Jul 31 15:09:18 2008] Trying to get 'ftp://ftp.funet.fi/pub/languages/perl/CPAN/authors/id/V/VP/VPARSEVAL/CHECKSUMS'
[MSG] [Thu Jul 31 15:09:21 2008] Checksum matches for 'List-MoreUtils-0.22.tar.gz'
[MSG] [Thu Jul 31 15:09:22 2008] Extracted 'List-MoreUtils-0.22/'
[MSG] [Thu Jul 31 15:09:22 2008] Extracted 'List-MoreUtils-0.22/Changes'
[MSG] [Thu Jul 31 15:09:22 2008] Extracted 'List-MoreUtils-0.22/dhash.h'
[MSG] [Thu Jul 31 15:09:22 2008] Extracted 'List-MoreUtils-0.22/lib/'
[MSG] [Thu Jul 31 15:09:22 2008] Extracted 'List-MoreUtils-0.22/lib/List/'
[MSG] [Thu Jul 31 15:09:22 2008] Extracted 'List-MoreUtils-0.22/lib/List/MoreUtils.pm'
[MSG] [Thu Jul 31 15:09:22 2008] Extracted 'List-MoreUtils-0.22/Makefile.PL'
[MSG] [Thu Jul 31 15:09:22 2008] Extracted 'List-MoreUtils-0.22/MANIFEST'
[MSG] [Thu Jul 31 15:09:22 2008] Extracted 'List-MoreUtils-0.22/META.yml'
[MSG] [Thu Jul 31 15:09:23 2008] Extracted 'List-MoreUtils-0.22/MoreUtils.xs'
[MSG] [Thu Jul 31 15:09:23 2008] Extracted 'List-MoreUtils-0.22/multicall.h'
[MSG] [Thu Jul 31 15:09:23 2008] Extracted 'List-MoreUtils-0.22/README'
[MSG] [Thu Jul 31 15:09:23 2008] Extracted 'List-MoreUtils-0.22/t/'
[MSG] [Thu Jul 31 15:09:23 2008] Extracted 'List-MoreUtils-0.22/t/0_pod.t'
[MSG] [Thu Jul 31 15:09:23 2008] Extracted 'List-MoreUtils-0.22/t/0_pod_coverage.t'
[MSG] [Thu Jul 31 15:09:23 2008] Extracted 'List-MoreUtils-0.22/t/List-MoreUtils-pp.t'
[MSG] [Thu Jul 31 15:09:23 2008] Extracted 'List-MoreUtils-0.22/t/List-MoreUtils.t'
[MSG] [Thu Jul 31 15:09:23 2008] Extracted 'List::MoreUtils' to '/home/cpan/pit/rel/perl5.10.0/.cpanplus/5.10.0/build/List-MoreUtils-0.22'
[MSG] [Thu Jul 31 15:09:27 2008] Checking if your kit is complete...
Looks good
Writing Makefile for List::MoreUtils
Testing if you have a C compiler
cc -c -pthread -fno-strict-aliasing -pipe -I/usr/local/include -O2 -DVERSION=\"0.22\" -DXS_VERSION=\"0.22\" -DPIC -fPIC "-I/home/cpan/pit/rel/perl5.10.0/lib/5.10.0/OpenBSD.i386-openbsd-thread-multi-64int/CORE" -DPERL_EXT test.c
[MSG] [Thu Jul 31 15:09:27 2008] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value'
[MSG] [Thu Jul 31 15:09:52 2008] cp lib/List/MoreUtils.pm blib/lib/List/MoreUtils.pm
/home/cpan/pit/rel/perl5.10.0/bin/perl /home/cpan/pit/rel/perl5.10.0/lib/5.10.0/ExtUtils/xsubpp -typemap /home/cpan/pit/rel/perl5.10.0/lib/5.10.0/ExtUtils/typemap MoreUtils.xs > MoreUtils.xsc && mv MoreUtils.xsc MoreUtils.c
cc -c -pthread -fno-strict-aliasing -pipe -I/usr/local/include -O2 -DVERSION=\"0.22\" -DXS_VERSION=\"0.22\" -DPIC -fPIC "-I/home/cpan/pit/rel/perl5.10.0/lib/5.10.0/OpenBSD.i386-openbsd-thread-multi-64int/CORE" -DPERL_EXT MoreUtils.c
Running Mkbootstrap for List::MoreUtils ()
chmod 644 MoreUtils.bs
rm -f blib/arch/auto/List/MoreUtils/MoreUtils.so
cc -shared -fPIC -L/usr/local/lib MoreUtils.o -o blib/arch/auto/List/MoreUtils/MoreUtils.so
chmod 755 blib/arch/auto/List/MoreUtils/MoreUtils.so
cp MoreUtils.bs blib/arch/auto/List/MoreUtils/MoreUtils.bs
chmod 644 blib/arch/auto/List/MoreUtils/MoreUtils.bs
Manifying blib/man3/List::MoreUtils.3
[ERROR] [Thu Jul 31 15:10:25 2008] MAKE TEST failed: Illegal seek PERL_DL_NONLAZY=1 /home/cpan/pit/rel/perl5.10.0/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
t/0_pod................skipped
all skipped: Test::Pod not installed
t/0_pod_coverage.......skipped
all skipped: Test::Pod::Coverage not installed
t/List-MoreUtils-pp....Out of memory!
dubious
Test returned status 1 (wstat 256, 0x100)
DIED. FAILED tests 120-123
Failed 4/123 tests, 96.75% okay
t/List-MoreUtils.......ok
Failed Test Stat Wstat Total Fail List of Failed
-------------------------------------------------------------------------------
t/List-MoreUtils-pp.t 1 256 123 8 120-123
2 tests skipped.
Failed 1/4 test scripts. 4/262 subtests failed.
Files=4, Tests=262, 31 wallclock secs ( 2.09 cusr + 14.99 csys = 17.08 CPU)
Failed 1/4 test programs. 4/262 subtests failed.
*** Error code 255
Stop in /home/cpan/pit/rel/perl5.10.0/.cpanplus/5.10.0/build/List-MoreUtils-0.22 (line 917 of Makefile).
[MSG] [Thu Jul 31 15:10:25 2008] DEFAULT 'proceed_on_test_failure' HANDLER RETURNING 'sub return value'
******************************** NOTE ********************************
The comments above are created mechanically, possibly without manual
checking by the sender. As there are many people performing automatic
tests on each upload to CPAN, it is likely that you will receive
identical messages about the same problem.
If you believe that the message is mistaken, please reply to the first
one with correction and/or additional informations, and do not take
it personally. We appreciate your patience. :)
**********************************************************************
Additional comments:
--
Summary of my perl5 (revision 5 version 10 subversion 0) configuration:
Platform:
osname=openbsd, osvers=4.3, archname=OpenBSD.i386-openbsd-thread-multi-64int
uname='openbsd diafol-agored.bingosnet.co.uk 4.3 generic#698 i386 '
config_args='-e -Dprefix=/home/cpan/pit/rel/perl5.10.0 -Dusethreads -Duse64bitint'
hint=recommended, useposix=true, d_sigaction=define
useithreads=define, usemultiplicity=define
useperlio=define, d_sfio=undef, uselargefiles=define, usesocks=undef
use64bitint=define, use64bitall=undef, uselongdouble=undef
usemymalloc=n, bincompat5005=undef
Compiler:
cc='cc', ccflags ='-pthread -fno-strict-aliasing -pipe -I/usr/local/include',
optimize='-O2',
cppflags='-pthread -fno-strict-aliasing -pipe -I/usr/local/include'
ccversion='', gccversion='3.3.5 (propolice)', gccosandvers='openbsd4.3'
intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=12345678
d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=12
ivtype='long long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8
alignbytes=4, prototype=define
Linker and Libraries:
ld='cc', ldflags ='-pthread -Wl,-E -L/usr/local/lib'
libpth=/usr/local/lib /usr/lib
libs=-lm -lutil -lc
perllibs=-lm -lutil -lc
libc=/usr/lib/libc.so.43.0, so=so, useshrplib=false, libperl=libperl.a
gnulibc_version=''
Dynamic Linking:
Thread Next