Front page | perl.cpan.testers |
Postings from September 2008
FAIL URI-ParseSearchString-2.6 i686-linux-thread-multi-64int-ld2.6.16.38
Thread Previous
From:
chris
Date:
September 27, 2008 05:01
Subject:
FAIL URI-ParseSearchString-2.6 i686-linux-thread-multi-64int-ld2.6.16.38
This distribution has been tested as part of the cpan-testers
effort to test as many new uploads to CPAN as possible. See
http://testers.cpan.org/
--
Dear SDEN,
This is a computer-generated error report created automatically by
CPANPLUS, version 0.84. Testers personal comments may appear
at the end of this report.
Thank you for uploading your work to CPAN. However, it appears that
there were some problems testing your distribution.
TEST RESULTS:
Below is the error stack from stage 'make test':
[MSG] [Sat Sep 27 13:01:27 2008] Manifying blib/man3/Test::Tester::Capture.3
Manifying blib/man3/Test::Tester.3
Manifying blib/man3/Test::Tester::CaptureRunner.3
[MSG] [Sat Sep 27 13:01:27 2008] Sending test report for 'Test-Tester-0.107'
[MSG] [Sat Sep 27 13:01:27 2008] Ok, not sending test report
[MSG] [Sat Sep 27 13:01:29 2008] Manifying blib/man3/Test::NoWarnings.3
[MSG] [Sat Sep 27 13:01:29 2008] Sending test report for 'Test-NoWarnings-0.084'
[MSG] [Sat Sep 27 13:01:29 2008] Ok, not sending test report
[MSG] [Sat Sep 27 13:01:32 2008] cp lib/URI/ParseSearchString.pm blib/lib/URI/ParseSearchString.pm
Manifying blib/man3/URI::ParseSearchString.3
[ERROR] [Sat Sep 27 13:01:33 2008] MAKE TEST failed: Illegal seek PERL_DL_NONLAZY=1 /home/cpan/perl5.10.0/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
t/00-load...........
# Failed test 'use URI::ParseSearchString;'
# at t/00-load.t line 6.
# Tried to use 'URI::ParseSearchString'.
# Error: Can't locate URI/Split.pm in @INC (@INC contains: /home/cpan/perl5.10.0/.cpanplus/5.10.0/build/URI-ParseSearchString-2.6/blib/lib /home/cpan/perl5.10.0/.cpanplus/5.10.0/build/URI-ParseSearchString-2.6/blib/arch /home/cpan/perl5.10.0/.cpanplus/5.10.0/build/URI-ParseSearchString-2.6/blib/lib /home/cpan/perl5.10.0/.cpanplus/5.10.0/build/URI-ParseSearchString-2.6/blib/arch /home/cpan/perl5.10.0/.cpanplus/5.10.0/build/Test-Tester-0.107/blib/lib /home/cpan/perl5.10.0/.cpanplus/5.10.0/build/Test-Tester-0.107/blib/arch /home/cpan/perl5.10.0/.cpanplus/5.10.0/build/Test-Tester-0.107/blib /home/cpan/perl5.10.0/.cpanplus/5.10.0/build/Test-Tester-0.107/blib/lib /home/cpan/perl5.10.0/.cpanplus/5.10.0/build/Test-Tester-0.107/blib/arch /home/cpan/perl5.10.0/.cpanplus/5.10.0/build/Test-Tester-0.107/blib /home/cpan/perl5.10.0/.cpanplus/5.10.0/build/Test-NoWarnings-0.084/blib/lib /home/cpan/perl5.10.0/.cpanplus/5.10.0/build/Test-NoWarnings-0.084/blib/arch /home/cpan/perl5.10.0/.cpanplus/5.10.0/build/Test-NoWarnings-0.084/blib /home/cpan/perl5.10.0/.cpanplus/5.10.0/build/Test-NoWarnings-0.084/blib/lib /home/cpan/perl5.10.0/.cpanplus/5.10.0/build/Test-NoWarnings-0.084/blib/arch /home/cpan/perl5.10.0/.cpanplus/5.10.0/build/Test-NoWarnings-0.084/blib /home/cpan/perl5.10.0/.cpanplus/5.10.0/build/URI-ParseSearchString-2.6/blib/lib /home/cpan/perl5.10.0/.cpanplus/5.10.0/build/URI-ParseSearchString-2.6/blib/arch /home/cpan/perl5.10.0/.cpanplus/5.10.0/build/URI-ParseSearchString-2.6/blib /home/cpan/perl5.10.0/lib/5.10.0/i686-linux-thread-multi-64int-ld /home/cpan/perl5.10.0/lib/5.10.0 /home/cpan/perl5.10.0/lib/site_perl/5.10.0/i686-linux-thread-multi-64int-ld /home/cpan/perl5.10.0/lib/site_perl/5.10.0) at /home/cpan/perl5.10.0/.cpanplus/5.10.0/build/URI-ParseSearchString-2.6/blib/lib/URI/ParseSearchString.pm line 10.
# BEGIN failed--compilation aborted at t/00-load.t line 6.
# Compilation failed in require at (eval 3) line 2.
# BEGIN failed--compilation aborted at (eval 3) line 2.
Use of uninitialized value $URI::ParseSearchString::VERSION in concatenation (.) or string at t/00-load.t line 9.
# Testing URI::ParseSearchString , Perl 5.010000, /home/cpan/perl5.10.0/bin/perl
# Looks like you failed 1 test of 1.
Dubious, test returned 1 (wstat 256, 0x100)
Failed 1/1 subtests
t/kwalitee..........skipped: Test::Kwalitee not installed; skipping
t/parse.............Can't locate URI/Split.pm in @INC (@INC contains: /home/cpan/perl5.10.0/.cpanplus/5.10.0/build/URI-ParseSearchString-2.6/blib/lib /home/cpan/perl5.10.0/.cpanplus/5.10.0/build/URI-ParseSearchString-2.6/blib/arch /home/cpan/perl5.10.0/.cpanplus/5.10.0/build/Test-Tester-0.107/blib/lib /home/cpan/perl5.10.0/.cpanplus/5.10.0/build/Test-Tester-0.107/blib/arch /home/cpan/perl5.10.0/.cpanplus/5.10.0/build/Test-Tester-0.107/blib /home/cpan/perl5.10.0/.cpanplus/5.10.0/build/Test-Tester-0.107/blib/lib /home/cpan/perl5.10.0/.cpanplus/5.10.0/build/Test-Tester-0.107/blib/arch /home/cpan/perl5.10.0/.cpanplus/5.10.0/build/Test-Tester-0.107/blib /home/cpan/perl5.10.0/.cpanplus/5.10.0/build/Test-NoWarnings-0.084/blib/lib /home/cpan/perl5.10.0/.cpanplus/5.10.0/build/Test-NoWarnings-0.084/blib/arch /home/cpan/perl5.10.0/.cpanplus/5.10.0/build/Test-NoWarnings-0.084/blib /home/cpan/perl5.10.0/.cpanplus/5.10.0/build/Test-NoWarnings-0.084/blib/lib /home/cpan/perl5.10.0/.cpanplus/5.10.0/build/Test-NoWarnings-0.084/blib/arch /home/cpan/perl5.10.0/.cpanplus/5.10.0/build/Test-NoWarnings-0.084/blib /home/cpan/perl5.10.0/.cpanplus/5.10.0/build/URI-ParseSearchString-2.6/blib/lib /home/cpan/perl5.10.0/.cpanplus/5.10.0/build/URI-ParseSearchString-2.6/blib/arch /home/cpan/perl5.10.0/.cpanplus/5.10.0/build/URI-ParseSearchString-2.6/blib /home/cpan/perl5.10.0/lib/5.10.0/i686-linux-thread-multi-64int-ld /home/cpan/perl5.10.0/lib/5.10.0 /home/cpan/perl5.10.0/lib/site_perl/5.10.0/i686-linux-thread-multi-64int-ld /home/cpan/perl5.10.0/lib/site_perl/5.10.0 .) at /home/cpan/perl5.10.0/.cpanplus/5.10.0/build/URI-ParseSearchString-2.6/blib/lib/URI/ParseSearchString.pm line 10.
BEGIN failed--compilation aborted at /home/cpan/perl5.10.0/.cpanplus/5.10.0/build/URI-ParseSearchString-2.6/blib/lib/URI/ParseSearchString.pm line 10.
Compilation failed in require at t/parse.t line 10.
BEGIN failed--compilation aborted at t/parse.t line 10.
# Looks like your test died just after 1.
Dubious, test returned 255 (wstat 65280, 0xff00)
All 1 subtests passed
t/pod-coverage......skipped: Test::Pod::Coverage required for testing pod coverage
t/pod...............skipped: Test::Pod 1.00 required for testing POD
Test Summary Report
-------------------
t/00-load.t (Wstat: 256 Tests: 1 Failed: 1)
Failed test: 1
Non-zero exit status: 1
t/parse.t (Wstat: 65280 Tests: 1 Failed: 0)
Non-zero exit status: 255
Files=5, Tests=2, 1 wallclock secs ( 0.07 usr 0.02 sys + 0.41 cusr 0.15 csys = 0.65 CPU)
Result: FAIL
Failed 2/5 test programs. 1/2 subtests failed.
make: *** [test_dynamic] Error 255
[MSG] [Sat Sep 27 13:01:33 2008] DEFAULT 'proceed_on_test_failure' HANDLER RETURNING 'sub return value'
MISSING PREREQUISITES:
It was observed that the test suite seem to fail without these modules:
URI::Split
As such, adding the prerequisite module(s) to 'PREREQ_PM' in your
Makefile.PL should solve this problem. For example:
WriteMakefile(
AUTHOR => 'SDEN (cpanplus-info@lists.sf.net)',
... # other information
PREREQ_PM => {
'URI::Split' => '0', # or a minimum working version
}
);
If you are interested in making a more flexible Makefile.PL that can
probe for missing dependencies and install them, ExtUtils::AutoInstall
at <http://search.cpan.org/dist/ExtUtils-AutoInstall/> may be
worth a look.
Thanks! :-)
PREREQUISITES:
Here is a list of prerequisites you specified and versions we
managed to load:
Module Name Have Want
Test::More 0.72 0
Test::NoWarnings 0.084 0
******************************** NOTE ********************************
The comments above are created mechanically, possibly without manual
checking by the sender. As there are many people performing automatic
tests on each upload to CPAN, it is likely that you will receive
identical messages about the same problem.
If you believe that the message is mistaken, please reply to the first
one with correction and/or additional informations, and do not take
it personally. We appreciate your patience. :)
**********************************************************************
Additional comments:
This report was machine-generated by CPANPLUS::Dist::YACSmoke 0.12.
------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------
Environment variables:
AUTOMATED_TESTING = 1
LANG = en_GB.UTF-8
PATH = /usr/local/bin:/bin:/usr/bin:/usr/X11/bin
PERL5LIB = :/home/cpan/perl5.10.0/.cpanplus/5.10.0/build/Test-Tester-0.107/blib/lib:/home/cpan/perl5.10.0/.cpanplus/5.10.0/build/Test-Tester-0.107/blib/arch:/home/cpan/perl5.10.0/.cpanplus/5.10.0/build/Test-Tester-0.107/blib:/home/cpan/perl5.10.0/.cpanplus/5.10.0/build/Test-Tester-0.107/blib/lib:/home/cpan/perl5.10.0/.cpanplus/5.10.0/build/Test-Tester-0.107/blib/arch:/home/cpan/perl5.10.0/.cpanplus/5.10.0/build/Test-Tester-0.107/blib:/home/cpan/perl5.10.0/.cpanplus/5.10.0/build/Test-NoWarnings-0.084/blib/lib:/home/cpan/perl5.10.0/.cpanplus/5.10.0/build/Test-NoWarnings-0.084/blib/arch:/home/cpan/perl5.10.0/.cpanplus/5.10.0/build/Test-NoWarnings-0.084/blib:/home/cpan/perl5.10.0/.cpanplus/5.10.0/build/Test-NoWarnings-0.084/blib/lib:/home/cpan/perl5.10.0/.cpanplus/5.10.0/build/Test-NoWarnings-0.084/blib/arch:/home/cpan/perl5.10.0/.cpanplus/5.10.0/build/Test-NoWarnings-0.084/blib:/home/cpan/perl5.10.0/.cpanplus/5.10.0/build/URI-ParseSearchString-2.6/blib/lib:/home/cpan/perl5.10.0/.cpanplus/5.10.0/build/URI-ParseSearchString-2.6/blib/arch:/home/cpan/perl5.10.0/.cpanplus/5.10.0/build/URI-ParseSearchString-2.6/blib
PERL5_CPANPLUS_IS_RUNNING = 10556
PERL5_CPANPLUS_IS_VERSION = 0.84
PERL5_CPANPLUS_VERBOSE = 1
PERL_MM_USE_DEFAULT = 1
SHELL = /bin/bash
TERM = screen.linux
Perl special variables (and OS-specific diagnostics, for MSWin32):
Perl: $^X = /home/cpan/perl5.10.0/bin/perl
UID: $< = 1000
EUID: $> = 1000
GID: $( = 100 100
EGID: $) = 100 100
-------------------------------
--
Summary of my perl5 (revision 5 version 10 subversion 0) configuration:
Platform:
osname=linux, osvers=2.6.16.38, archname=i686-linux-thread-multi-64int-ld
uname='linux scratch 2.6.16.38 #1 preempt thu feb 22 16:04:10 gmt 2007 i686 athlon-4 i386 gnulinux '
config_args='-e -Dprefix=/home/cpan/perl5.10.0 -Dusethreads -Duse64bitint -Dusemymalloc=n'
hint=recommended, useposix=true, d_sigaction=define
useithreads=define, usemultiplicity=define
useperlio=define, d_sfio=undef, uselargefiles=define, usesocks=undef
use64bitint=define, use64bitall=undef, uselongdouble=define
usemymalloc=n, bincompat5005=undef
Compiler:
cc='cc', ccflags ='-D_REENTRANT -D_GNU_SOURCE -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64',
optimize='-O2',
cppflags='-D_REENTRANT -D_GNU_SOURCE -fno-strict-aliasing -pipe -I/usr/local/include'
ccversion='', gccversion='4.0.3', gccosandvers=''
intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=12345678
d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=12
ivtype='long long', ivsize=8, nvtype='long double', nvsize=12, Off_t='off_t', lseeksize=8
alignbytes=4, prototype=define
Linker and Libraries:
ld='cc', ldflags =' -L/usr/local/lib'
libpth=/usr/local/lib /lib /usr/lib
libs=-lnsl -lgdbm -ldb -ldl -lm -lcrypt -lutil -lpthread -lc
perllibs=-lnsl -ldl -lm -lcrypt -lutil -lpthread -lc
libc=/lib/libc-2.3.6.so, so=so, useshrplib=false, libperl=libperl.a
gnulibc_version='2.3.6'
Dynamic Linking:
dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E'
Thread Previous