Front page | perl.cpan.testers |
Postings from September 2005
FAIL File-BOM-0.10 i386-freebsd 5.4-stable
Thread Previous
From:
david
Date:
September 27, 2005 02:29
Subject:
FAIL File-BOM-0.10 i386-freebsd 5.4-stable
This distribution has been tested as part of the cpan-testers
effort to test as many new uploads to CPAN as possible. See
http://testers.cpan.org/
Please cc any replies to cpan-testers@perl.org to keep other
test volunteers informed and to prevent any duplicate effort.
--
Dear Matthew Lawrence,
This is a computer-generated error report created automatically by
CPANPLUS, version 0.0562. Testers personal comments may appear
at the end of this report.
Thank you for uploading your work to CPAN. However, it appears that
there were some problems testing your distribution.
TEST RESULTS:
Below is the error stack from stage 'make test':
[CP_MSG] [Tue Sep 27 11:43:55 2005] Trying to get 'ftp://ftp.oleane.net/pub/CPAN/authors/id/M/MA/MATTLAW/CHECKSUMS'
[CP_MSG] [Tue Sep 27 11:44:03 2005] Checksum matches for 'File-BOM-0.10.tar.gz'
[CP_MSG] [Tue Sep 27 11:44:06 2005] Extracted 'File-BOM-0.10/'
[CP_MSG] [Tue Sep 27 11:44:06 2005] Extracted 'File-BOM-0.10/t/'
[CP_MSG] [Tue Sep 27 11:44:06 2005] Extracted 'File-BOM-0.10/t/99..shutdown.t'
[CP_MSG] [Tue Sep 27 11:44:06 2005] Extracted 'File-BOM-0.10/t/03..exceptions.t'
[CP_MSG] [Tue Sep 27 11:44:06 2005] Extracted 'File-BOM-0.10/t/data/'
[CP_MSG] [Tue Sep 27 11:44:06 2005] Extracted 'File-BOM-0.10/t/data/broken_bom.txt'
[CP_MSG] [Tue Sep 27 11:44:06 2005] Extracted 'File-BOM-0.10/t/lib/'
[CP_MSG] [Tue Sep 27 11:44:06 2005] Extracted 'File-BOM-0.10/t/lib/Test/'
[CP_MSG] [Tue Sep 27 11:44:06 2005] Extracted 'File-BOM-0.10/t/lib/Test/Framework.pm'
[CP_MSG] [Tue Sep 27 11:44:06 2005] Extracted 'File-BOM-0.10/t/02..perlio-via.t'
[CP_MSG] [Tue Sep 27 11:44:06 2005] Extracted 'File-BOM-0.10/t/00..setup.t'
[CP_MSG] [Tue Sep 27 11:44:06 2005] Extracted 'File-BOM-0.10/t/01..bom.t'
[CP_MSG] [Tue Sep 27 11:44:06 2005] Extracted 'File-BOM-0.10/META.yml'
[CP_MSG] [Tue Sep 27 11:44:06 2005] Extracted 'File-BOM-0.10/lib/'
[CP_MSG] [Tue Sep 27 11:44:06 2005] Extracted 'File-BOM-0.10/lib/File/'
[CP_MSG] [Tue Sep 27 11:44:06 2005] Extracted 'File-BOM-0.10/lib/File/BOM.pm'
[CP_MSG] [Tue Sep 27 11:44:06 2005] Extracted 'File-BOM-0.10/Changes'
[CP_MSG] [Tue Sep 27 11:44:06 2005] Extracted 'File-BOM-0.10/MANIFEST'
[CP_MSG] [Tue Sep 27 11:44:06 2005] Extracted 'File-BOM-0.10/TODO'
[CP_MSG] [Tue Sep 27 11:44:06 2005] Extracted 'File-BOM-0.10/Build.PL'
[CP_MSG] [Tue Sep 27 11:44:06 2005] Extracted 'File-BOM-0.10/Makefile.PL'
[CP_MSG] [Tue Sep 27 11:44:06 2005] Extracted 'File-BOM-0.10/README'
[CP_MSG] [Tue Sep 27 11:44:06 2005] Extracted 'File::BOM' to '/home/cpan/plus/5.8.4/build/File-BOM-0.10'
[CP_MSG] [Tue Sep 27 11:44:07 2005] # running Build.PL
/usr/local/bin/p584 -I_build/lib Build.PL
* ERROR: Prerequisite Readonly isn't installed
* ERROR: Prerequisite Test::Exception isn't installed
ERRORS/WARNINGS FOUND IN PREREQUISITES. You may wish to install the versions
of the modules indicated above before proceeding with this installation.
Checking whether your kit is complete...
Looks good
Creating new 'Build' script for 'File-BOM' version '0.10'
[CP_MSG] [Tue Sep 27 11:44:07 2005] Module 'File::BOM' requires 'Readonly' version '0.06' to be installed
[CP_MSG] [Tue Sep 27 11:44:07 2005] Module 'File::BOM' requires 'Test::Exception' version '0.20' to be installed
[CP_MSG] [Tue Sep 27 11:44:08 2005] /usr/local/bin/p584 Build --makefile_env_macros 1
lib/File/BOM.pm -> blib/lib/File/BOM.pm
Manifying blib/lib/File/BOM.pm -> blib/libdoc/File::BOM.3
[CP_ERROR] [Tue Sep 27 11:44:11 2005] MAKE TEST failed: No such file or directory /usr/local/bin/p584 Build --makefile_env_macros 1 test
t/00..setup.........ok
t/01..bom...........
# Failed test (t/01..bom.t at line 134)
Wide character in print at /home/perl/p584/lib/5.8.4/Test/Builder.pm line 1095.
# got: ''
# expected: 'Testing â
°, â
±, â
²
# '
# Failed test (t/01..bom.t at line 147)
Wide character in print at /home/perl/p584/lib/5.8.4/Test/Builder.pm line 1095.
# got: ''
# expected: 'Testing â
°, â
±, â
²
# '
# Hex dump:
# Got:
# Expected: 54 65 73 74 69 6e 67 20 e2 85 b0 2c 20 e2 85 b1 2c 20 e2 85 b2 0a
# Spillage:
# Failed test (t/01..bom.t at line 134)
Wide character in print at /home/perl/p584/lib/5.8.4/Test/Builder.pm line 1095.
# got: ''
# expected: 'Testing â
°, â
±, â
²
# '
# Failed test (t/01..bom.t at line 147)
Wide character in print at /home/perl/p584/lib/5.8.4/Test/Builder.pm line 1095.
# got: ''
# expected: 'Testing â
°, â
±, â
²
# '
# Hex dump:
# Got:
# Expected: 54 65 73 74 69 6e 67 20 e2 85 b0 2c 20 e2 85 b1 2c 20 e2 85 b2 0a
# Spillage:
# Failed test (t/01..bom.t at line 134)
Wide character in print at /home/perl/p584/lib/5.8.4/Test/Builder.pm line 1095.
# got: ''
# expected: 'Testing â
°, â
±, â
²
# '
# Failed test (t/01..bom.t at line 147)
Wide character in print at /home/perl/p584/lib/5.8.4/Test/Builder.pm line 1095.
# got: ''
# expected: 'Testing â
°, â
±, â
²
# '
# Hex dump:
# Got:
# Expected: 54 65 73 74 69 6e 67 20 e2 85 b0 2c 20 e2 85 b1 2c 20 e2 85 b2 0a
# Spillage:
# Failed test (t/01..bom.t at line 134)
Wide character in print at /home/perl/p584/lib/5.8.4/Test/Builder.pm line 1095.
# got: ''
# expected: 'Testing â
°, â
±, â
²
# '
# Failed test (t/01..bom.t at line 147)
Wide character in print at /home/perl/p584/lib/5.8.4/Test/Builder.pm line 1095.
# got: ''
# expected: 'Testing â
°, â
±, â
²
# '
# Hex dump:
# Got:
# Expected: 54 65 73 74 69 6e 67 20 e2 85 b0 2c 20 e2 85 b1 2c 20 e2 85 b2 0a
# Spillage:
# Failed test (t/01..bom.t at line 134)
Wide character in print at /home/perl/p584/lib/5.8.4/Test/Builder.pm line 1095.
# got: ''
# expected: 'Testing â
°, â
±, â
²
# '
# Failed test (t/01..bom.t at line 147)
Wide character in print at /home/perl/p584/lib/5.8.4/Test/Builder.pm line 1095.
# got: ''
# expected: 'Testing â
°, â
±, â
²
# '
# Hex dump:
# Got:
# Expected: 54 65 73 74 69 6e 67 20 e2 85 b0 2c 20 e2 85 b1 2c 20 e2 85 b2 0a
# Spillage:
# Failed test (t/01..bom.t at line 176)
# Failed test (t/01..bom.t at line 177)
# got: ''
# expected: 'ÿÿThis file has a broken BOM'
# Looks like you failed 12 tests of 115.
dubious
Test returned status 12 (wstat 3072, 0xc00)
DIED. FAILED tests 87, 89, 91, 93, 95, 97, 99, 101, 103, 105, 109-110
Failed 12/115 tests, 89.57% okay
t/02..perlio-via....ok
t/03..exceptions....Can't locate Sub/Uplevel.pm in @INC (@INC contains: t/lib /home/cpan/plus/5.8.4/build/File-BOM-0.10/blib/lib /home/cpan/plus/5.8.4/build/File-BOM-0.10/blib/arch /home/cpan/plus/5.8.4/build/File-BOM-0.10/lib /home/cpan/plus/5.8.4/build/File-BOM-0.10/_build/lib /home/cpan/plus/5.8.2/build/Readonly-1.03/blib/lib /home/cpan/plus/5.8.2/build/Readonly-1.03/blib/arch /home/cpan/plus/5.8.1/build/Test-Exception-0.21/blib/lib /home/cpan/plus/5.8.1/build/Test-Exception-0.21/blib/arch /home/perl/p584/lib/5.8.4/i386-freebsd /home/perl/p584/lib/5.8.4 /home/perl/p584/lib/site_perl/5.8.4/i386-freebsd /home/perl/p584/lib/site_perl/5.8.4 /home/perl/p584/lib/site_perl .) at /home/cpan/plus/5.8.1/build/Test-Exception-0.21/blib/lib/Test/Exception.pm line 7.
BEGIN failed--compilation aborted at /home/cpan/plus/5.8.1/build/Test-Exception-0.21/blib/lib/Test/Exception.pm line 7.
Compilation failed in require at t/03..exceptions.t line 17.
BEGIN failed--compilation aborted at t/03..exceptions.t line 17.
# Looks like your test died before it could output anything.
dubious
Test returned status 255 (wstat 65280, 0xff00)
t/99..shutdown......ok
Failed 2/5 test scripts, 60.00% okay. 12/184 subtests failed, 93.48% okay.
Failed Test Stat Wstat Total Fail Failed List of Failed
-------------------------------------------------------------------------------
t/01..bom.t 12 3072 115 12 10.43% 87 89 91 93 95 97 99 101 103
105 109-110
t/03..exceptions.t 255 65280 ?? ?? % ??
*** Error code 25
Stop in /home/cpan/plus/5.8.4/build/File-BOM-0.10.
MISSING PREREQUISITES:
It was observed that the test suite seem to fail without these modules:
Sub::Uplevel
As such, adding the prerequisite module(s) to 'PREREQ_PM' in your
Makefile.PL should solve this problem. For example:
WriteMakefile(
AUTHOR => 'Matthew Lawrence (matt.lawrence@virgin.net)',
... # other information
PREREQ_PM => {
'Sub::Uplevel' => '0', # or a minimum working version
}
);
If you are interested in making a more flexible Makefile.PL that can
probe for missing dependencies and install them, ExtUtils::AutoInstall
at <http://search.cpan.org/dist/ExtUtils-AutoInstall/> may be
worth a look.
Thanks! :-)
PREREQUISITES:
Here is a list of prerequisites you specified and versions we
managed to load:
Module::Build 0.2611
Readonly 0
Test::Exception 0
Test::More 0.60
******************************** NOTE ********************************
The comments above are created mechanically, possibly without manual
checking by the sender. As there are many people performing automatic
tests on each upload to CPAN, it is likely that you will receive
identical messages about the same problem.
If you believe that the message is mistaken, please reply to the first
one with correction and/or additional informations, and do not take
it personally. We appreciate your patience. :)
**********************************************************************
Additional comments:
This report was machine-generated by CPAN::YACSmoke 0.03.
--
Summary of my perl5 (revision 5 version 8 subversion 4) configuration:
Platform:
osname=freebsd, osvers=5.4-stable, archname=i386-freebsd
uname='freebsd profane.mongueurs.net 5.4-stable freebsd 5.4-stable #2: thu aug 25 18:39:45 cest 2005 root@profane.mongueurs.net:usrobjusrsrcsysprofane i386 '
config_args='-des -Dusemymalloc -Dprefix=/home/perl/p584'
hint=recommended, useposix=true, d_sigaction=define
usethreads=undef use5005threads=undef useithreads=undef usemultiplicity=undef
useperlio=define d_sfio=undef uselargefiles=define usesocks=undef
use64bitint=undef use64bitall=undef uselongdouble=undef
usemymalloc=y, bincompat5005=undef
Compiler:
cc='cc', ccflags ='-DHAS_FPSETMASK -DHAS_FLOATINGPOINT_H -fno-strict-aliasing -I/usr/local/include',
optimize='-O',
cppflags='-DHAS_FPSETMASK -DHAS_FLOATINGPOINT_H -fno-strict-aliasing -I/usr/local/include'
ccversion='', gccversion='3.4.2 [FreeBSD] 20040728', gccosandvers=''
intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=1234
d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=12
ivtype='long', ivsize=4, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8
alignbytes=4, prototype=define
Linker and Libraries:
ld='cc', ldflags ='-Wl,-E -L/usr/local/lib'
libpth=/usr/lib /usr/local/lib
libs=-lm -lcrypt -lutil -lc
perllibs=-lm -lcrypt -lutil -lc
libc=, so=so, useshrplib=false, libperl=libperl.a
gnulibc_version=''
Dynamic Linking:
dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags=' '
cccdlflags='-DPIC -fPIC', lddlflags='-shared -L/usr/local/lib'
Thread Previous