develooper Front page | perl.cpan.testers | Postings from December 2005

FAIL Mail-CheckUser-1.21 i386-linux-thread-multi 2.6.9-22.18.bz155725.elsmp

From:
njh
Date:
December 29, 2005 01:21
Subject:
FAIL Mail-CheckUser-1.21 i386-linux-thread-multi 2.6.9-22.18.bz155725.elsmp
This distribution has been tested as part of the cpan-testers
effort to test as many new uploads to CPAN as possible.  See
http://testers.cpan.org/

Please cc any replies to cpan-testers@perl.org to keep other
test volunteers informed and to prevent any duplicate effort.
	
--

Dear Ilya Martynov,
    
This is a computer-generated error report created automatically by
CPANPLUS, version 0.0562. Testers personal comments may appear 
at the end of this report.


Thank you for uploading your work to CPAN.  However, it appears that
there were some problems testing your distribution.

TEST RESULTS:

Below is the error stack from stage 'make test':

[CP_MSG] [Thu Dec 29 09:20:27 2005] Checking if source files are up to date
[CP_MSG] [Thu Dec 29 09:20:27 2005] Updating source file '01mailrc.txt.gz'
[CP_MSG] [Thu Dec 29 09:20:27 2005] Trying to get 'ftp://ftp.mirror.ac.uk/sites/ftp.funet.fi/pub/languages/perl/CPAN/authors/01mailrc.txt.gz'
[CP_MSG] [Thu Dec 29 09:20:30 2005] Updating source file '03modlist.data.gz'
[CP_MSG] [Thu Dec 29 09:20:30 2005] Trying to get 'ftp://ftp.mirror.ac.uk/sites/ftp.funet.fi/pub/languages/perl/CPAN/modules/03modlist.data.gz'
[CP_MSG] [Thu Dec 29 09:20:31 2005] Updating source file '02packages.details.txt.gz'
[CP_MSG] [Thu Dec 29 09:20:31 2005] Trying to get 'ftp://ftp.mirror.ac.uk/sites/ftp.funet.fi/pub/languages/perl/CPAN/modules/02packages.details.txt.gz'
[CP_MSG] [Thu Dec 29 09:20:33 2005] Rebuilding author tree, this might take a while
[CP_MSG] [Thu Dec 29 09:20:34 2005] Rebuilding module tree, this might take a while
[CP_MSG] [Thu Dec 29 09:20:55 2005] Trying to get 'ftp://ftp.mirror.ac.uk/sites/ftp.funet.fi/pub/languages/perl/CPAN/authors/id/I/IL/ILYAM/CHECKSUMS'
[CP_MSG] [Thu Dec 29 09:20:55 2005] Checksum matches for 'Mail-CheckUser-1.21.tar.gz'
[CP_MSG] [Thu Dec 29 09:20:56 2005] Extracted 'Mail-CheckUser-1.21/'
[CP_MSG] [Thu Dec 29 09:20:56 2005] Extracted 'Mail-CheckUser-1.21/README'
[CP_MSG] [Thu Dec 29 09:20:56 2005] Extracted 'Mail-CheckUser-1.21/CheckUser.pm'
[CP_MSG] [Thu Dec 29 09:20:56 2005] Extracted 'Mail-CheckUser-1.21/MANIFEST'
[CP_MSG] [Thu Dec 29 09:20:56 2005] Extracted 'Mail-CheckUser-1.21/t/'
[CP_MSG] [Thu Dec 29 09:20:56 2005] Extracted 'Mail-CheckUser-1.21/t/timeout.t'
[CP_MSG] [Thu Dec 29 09:20:56 2005] Extracted 'Mail-CheckUser-1.21/t/smtp.t'
[CP_MSG] [Thu Dec 29 09:20:56 2005] Extracted 'Mail-CheckUser-1.21/t/wildcard.t'
[CP_MSG] [Thu Dec 29 09:20:56 2005] Extracted 'Mail-CheckUser-1.21/t/syntax.t'
[CP_MSG] [Thu Dec 29 09:20:56 2005] Extracted 'Mail-CheckUser-1.21/t/smtp-taint.t'
[CP_MSG] [Thu Dec 29 09:20:56 2005] Extracted 'Mail-CheckUser-1.21/t/check.pl'
[CP_MSG] [Thu Dec 29 09:20:56 2005] Extracted 'Mail-CheckUser-1.21/t/dns.t'
[CP_MSG] [Thu Dec 29 09:20:56 2005] Extracted 'Mail-CheckUser-1.21/Changes'
[CP_MSG] [Thu Dec 29 09:20:56 2005] Extracted 'Mail-CheckUser-1.21/Makefile.PL'
[CP_MSG] [Thu Dec 29 09:20:56 2005] Extracted 'Mail-CheckUser-1.21/TODO'
[CP_MSG] [Thu Dec 29 09:20:56 2005] Extracted 'Mail-CheckUser-1.21/procmail/'
[CP_MSG] [Thu Dec 29 09:20:56 2005] Extracted 'Mail-CheckUser-1.21/procmail/cufilter'
[CP_MSG] [Thu Dec 29 09:20:56 2005] Extracted 'Mail-CheckUser-1.21/procmail/.procmailrc'
[CP_MSG] [Thu Dec 29 09:20:56 2005] Extracted 'Mail::CheckUser' to '/root/.cpanplus/5.8.6/build/Mail-CheckUser-1.21'
[CP_MSG] [Thu Dec 29 09:20:57 2005] Writing Makefile for Mail::CheckUser

[CP_MSG] [Thu Dec 29 09:20:58 2005] cp procmail/cufilter blib/script/cufilter
/usr/bin/perl "-MExtUtils::MY" -e "MY->fixin(shift)" blib/script/cufilter
Manifying blib/man1/cufilter.1
Manifying blib/man3/Mail::CheckUser.3pm

[CP_ERROR] [Thu Dec 29 09:21:13 2005] MAKE TEST failed: Bad file descriptor PERL_DL_NONLAZY=1 /usr/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
t/dns...........ok
t/smtp-taint....FAILED before any test output arrived
t/smtp..........ok
t/syntax........ok
t/timeout.......ok
t/wildcard......# Failed test 5 in t/check.pl at line 20 fail #5
#  t/check.pl line 20 is:     ok($ok);
# Failed test 6 in t/check.pl at line 20 fail #6
# Failed test 8 in t/check.pl at line 20 fail #8
# Failed test 11 in t/check.pl at line 20 fail #11
# Failed test 12 in t/check.pl at line 20 fail #12
FAILED tests 5-6, 8, 11-12
	Failed 5/13 tests, 61.54% okay
Failed Test    Stat Wstat Total Fail  Failed  List of Failed
-------------------------------------------------------------------------------
t/smtp-taint.t               ??   ??       %  ??
t/wildcard.t                 13    5  38.46%  5-6 8 11-12
Failed 2/6 test scripts, 66.67% okay. 5/59 subtests failed, 91.53% okay.
make: *** [test_dynamic] Error 255


PREREQUISITES:

Here is a list of prerequisites you specified and versions we 
managed to load:
                                
	IO::Handle                         1.24
	Net::DNS                           0.55
	Net::Ping                          2.31
	Net::SMTP                          2.29

******************************** NOTE ********************************
The comments above are created mechanically, possibly without manual
checking by the sender.  As there are many people performing automatic
tests on each upload to CPAN, it is likely that you will receive 
identical messages about the same problem.

If you believe that the message is mistaken, please reply to the first
one with correction and/or additional informations, and do not take
it personally.  We appreciate your patience. :)
**********************************************************************

Additional comments:
 

--

Summary of my perl5 (revision 5 version 8 subversion 6) configuration:
  Platform:
    osname=linux, osvers=2.6.9-22.18.bz155725.elsmp, archname=i386-linux-thread-multi
    uname='linux hs20-bc1-5.build.redhat.com 2.6.9-22.18.bz155725.elsmp #1 smp thu nov 17 15:34:08 est 2005 i686 i686 i386 gnulinux '
    config_args='-des -Doptimize=-O2 -g -pipe -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -m32 -march=i386 -mtune=pentium4 -fasynchronous-unwind-tables -Dversion=5.8.6 -Dmyhostname=localhost -Dperladmin=root@localhost -Dcc=gcc -Dcf_by=Red Hat, Inc. -Dinstallprefix=/usr -Dprefix=/usr -Darchname=i386-linux -Dvendorprefix=/usr -Dsiteprefix=/usr -Duseshrplib -Dusethreads -Duseithreads -Duselargefiles -Dd_dosuid -Dd_semctl_semun -Di_db -Ui_ndbm -Di_gdbm -Di_shadow -Di_syslog -Dman3ext=3pm -Duseperlio -Dinstallusrbinperl=n -Ubincompat5005 -Uversiononly -Dpager=/usr/bin/less -isr -Dd_gethostent_r_proto -Ud_endhostent_r_proto -Ud_endprotoent_r_proto -Ud_endservent_r_proto -Ud_sethostent_r_proto -Ud_setprotoent_r_proto -Ud_setservent_r_proto -Dinc_version_list=5.8.5 5.8.4 5.8.3'
    hint=recommended, useposix=true, d_sigaction=define
    usethreads=define use5005threads=undef useithreads=define usemultiplicity=define
    useperlio=define d_sfio=undef uselargefiles=define usesocks=undef
    use64bitint=undef use64bitall=undef uselongdouble=undef
    usemymalloc=n, bincompat5005=undef
  Compiler:
    cc='gcc', ccflags ='-D_REENTRANT -D_GNU_SOURCE -DDEBUGGING -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -I/usr/include/gdbm',
    optimize='-O2 -g -pipe -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -m32 -march=i386 -mtune=pentium4 -fasynchronous-unwind-tables',
    cppflags='-D_REENTRANT -D_GNU_SOURCE -DDEBUGGING -fno-strict-aliasing -pipe -I/usr/local/include -I/usr/include/gdbm'
    ccversion='', gccversion='4.0.2 20051125 (Red Hat 4.0.2-8)', gccosandvers=''
    intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=1234
    d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=12
    ivtype='long', ivsize=4, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8
    alignbytes=4, prototype=define
  Linker and Libraries:
    ld='gcc', ldflags =' -L/usr/local/lib'
    libpth=/usr/local/lib /lib /usr/lib
    libs=-lresolv -lnsl -lgdbm -ldb -ldl -lm -lcrypt -lutil -lpthread -lc
    perllibs=-lresolv -lnsl -ldl -lm -lcrypt -lutil -lpthread -lc
    libc=/lib/libc-2.3.5.so, so=so, useshrplib=true, libperl=libperl.so
    gnulibc_version='2.3.5'
  Dynamic Linking:
    dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E -Wl,-rpath,/usr/lib/perl5/5.8.6/i386-linux-thread-multi/CORE'
    cccdlflags='-fPIC', lddlflags='-shared -L/usr/local/lib'



Comments to Ask Bjørn Hansen at ask@perl.org | Group listing | About