FAIL Object-AutoAccessor-0.02 x86_64-linux-thread-multi-ld 2.6.16.14

This distribution has been tested as part of the cpan-testers
effort to test as many new uploads to CPAN as possible.  See
http://testers.cpan.org/

Please cc any replies to cpan-testers@perl.org to keep other
test volunteers informed and to prevent any duplicate effort.
	
--

Dear PIA,
    
This is a computer-generated error report created automatically by
CPANPLUS, version 0.061. Testers personal comments may appear 
at the end of this report.


Thank you for uploading your work to CPAN.  However, it appears that
there were some problems testing your distribution.

TEST RESULTS:

Below is the error stack from stage 'make test':

[MSG] [Sat Jul 22 16:57:41 2006] Trying to get 'http://www.cpan.org/authors/id/P/PI/PIA/Object-AutoAccessor-0.02.tar.gz'
[MSG] [Sat Jul 22 16:57:42 2006] Trying to get 'http://www.cpan.org/authors/id/P/PI/PIA/CHECKSUMS'
[MSG] [Sat Jul 22 16:57:43 2006] Checksum matches for 'Object-AutoAccessor-0.02.tar.gz'
[MSG] [Sat Jul 22 16:57:43 2006] Extracted 'Object-AutoAccessor-0.02/'
[MSG] [Sat Jul 22 16:57:43 2006] Extracted 'Object-AutoAccessor-0.02/README'
[MSG] [Sat Jul 22 16:57:43 2006] Extracted 'Object-AutoAccessor-0.02/lib/'
[MSG] [Sat Jul 22 16:57:43 2006] Extracted 'Object-AutoAccessor-0.02/lib/Object/'
[MSG] [Sat Jul 22 16:57:43 2006] Extracted 'Object-AutoAccessor-0.02/lib/Object/AutoAccessor.pm'
[MSG] [Sat Jul 22 16:57:43 2006] Extracted 'Object-AutoAccessor-0.02/Makefile.PL'
[MSG] [Sat Jul 22 16:57:44 2006] Extracted 'Object-AutoAccessor-0.02/t/'
[MSG] [Sat Jul 22 16:57:44 2006] Extracted 'Object-AutoAccessor-0.02/t/lib/'
[MSG] [Sat Jul 22 16:57:44 2006] Extracted 'Object-AutoAccessor-0.02/t/lib/Foo.pm'
[MSG] [Sat Jul 22 16:57:44 2006] Extracted 'Object-AutoAccessor-0.02/t/02_inherit.t'
[MSG] [Sat Jul 22 16:57:44 2006] Extracted 'Object-AutoAccessor-0.02/t/00_compile.t'
[MSG] [Sat Jul 22 16:57:44 2006] Extracted 'Object-AutoAccessor-0.02/t/03_html_template.t'
[MSG] [Sat Jul 22 16:57:44 2006] Extracted 'Object-AutoAccessor-0.02/t/01_base.t'
[MSG] [Sat Jul 22 16:57:44 2006] Extracted 'Object-AutoAccessor-0.02/MANIFEST'
[MSG] [Sat Jul 22 16:57:44 2006] Extracted 'Object-AutoAccessor-0.02/Changes'
[MSG] [Sat Jul 22 16:57:45 2006] Extracted 'Object-AutoAccessor-0.02/META.yml'
[MSG] [Sat Jul 22 16:57:45 2006] Extracted 'Object::AutoAccessor' to '/opt/perl/testers/.cpanplus/5.8.8/build/Object-AutoAccessor-0.02'
[MSG] [Sat Jul 22 16:57:46 2006] Checking if your kit is complete...
Looks good
Writing Makefile for Object::AutoAccessor

[MSG] [Sat Jul 22 16:57:46 2006] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value'
[MSG] [Sat Jul 22 16:57:50 2006] cp lib/Object/AutoAccessor.pm blib/lib/Object/AutoAccessor.pm
Manifying blib/man3/Object::AutoAccessor.3

[ERROR] [Sat Jul 22 16:57:50 2006] MAKE TEST failed: ¨S¦³¦¹¤@ÀɮשΥؿý make: execvp: /bin/sh: ¤Þ¼Æ¦C¶µ¥Ø¹Lªø
make: *** [test_dynamic] Error 127


PREREQUISITES:

Here is a list of prerequisites you specified and versions we 
managed to load:
                                
	Test::More                         0.62

******************************** NOTE ********************************
The comments above are created mechanically, possibly without manual
checking by the sender.  As there are many people performing automatic
tests on each upload to CPAN, it is likely that you will receive 
identical messages about the same problem.

If you believe that the message is mistaken, please reply to the first
one with correction and/or additional informations, and do not take
it personally.  We appreciate your patience. :)
**********************************************************************

Additional comments:
 

This report was machine-generated by CPAN::YACSmoke 0.03.

--

Summary of my perl5 (revision 5 version 8 subversion 8) configuration:
  Platform:
    osname=linux, osvers=2.6.16.14, archname=x86_64-linux-thread-multi-ld
    uname='linux rinse 2.6.16.14 #1 smp mon may 8 23:44:32 cst 2006 x86_64 gnulinux '
    config_args='-s -d -Dusethreads -Dcc=gcc -Duselongdouble -Doptimize=-g -O3 -Duse64bitint -Duse64bitall -Dprefix=/opt/perl/testers -Dd_dosuid -Dinc_version_list=none -Acccdlflags=-fPIC -Duseshrplib=true -Dcf_email=imacat@mail.imacat.idv.tw'
    hint=recommended, useposix=true, d_sigaction=define
    usethreads=define use5005threads=undef useithreads=define usemultiplicity=define
    useperlio=define d_sfio=undef uselargefiles=define usesocks=undef
    use64bitint=define use64bitall=define uselongdouble=define
    usemymalloc=n, bincompat5005=undef
  Compiler:
    cc='gcc', ccflags ='-D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS -DDEBUGGING -fno-strict-aliasing -pipe -Wdeclaration-after-statement -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64',
    optimize='-g -O3',
    cppflags='-D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS -DDEBUGGING -fno-strict-aliasing -pipe -Wdeclaration-after-statement -I/usr/local/include'
    ccversion='', gccversion='3.4.4 20050314 (prerelease) (Debian 3.4.3-13)', gccosandvers=''
    intsize=4, longsize=8, ptrsize=8, doublesize=8, byteorder=12345678
    d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=16
    ivtype='long', ivsize=8, nvtype='long double', nvsize=16, Off_t='off_t', lseeksize=8
    alignbytes=16, prototype=define
  Linker and Libraries:
    ld='gcc', ldflags =' -L/usr/local/lib'
    libpth=/usr/local/lib /lib /usr/lib
    libs=-lnsl -lgdbm -ldb -ldl -lm -lcrypt -lutil -lpthread -lc
    perllibs=-lnsl -ldl -lm -lcrypt -lutil -lpthread -lc
    libc=/lib/libc-2.3.2.so, so=so, useshrplib=true, libperl=libperl.so
    gnulibc_version='2.3.2'
  Dynamic Linking:
    dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E -Wl,-rpath,/opt/perl/testers/lib/5.8.8/x86_64-linux-thread-multi-ld/CORE'
    cccdlflags=' -fPIC', lddlflags='-shared -L/usr/local/lib'

• FAIL Object-AutoAccessor-0.02 x86_64-linux-thread-multi-ld 2.6.16.14 by imacat