Front page | perl.cpan.testers |
Postings from September 2006
FAIL TAPx-Parser-0.31 i386-netbsd-thread-multi-64int 3.0
From:
chris
Date:
September 27, 2006 09:59
Subject:
FAIL TAPx-Parser-0.31 i386-netbsd-thread-multi-64int 3.0
This distribution has been tested as part of the cpan-testers
effort to test as many new uploads to CPAN as possible. See
http://testers.cpan.org/
Please cc any replies to cpan-testers@perl.org to keep other
test volunteers informed and to prevent any duplicate effort.
--
Dear Curtis 'Ovid' Poe,
This is a computer-generated error report created automatically by
CPANPLUS, version 0.072. Testers personal comments may appear
at the end of this report.
Thank you for uploading your work to CPAN. However, it appears that
there were some problems testing your distribution.
TEST RESULTS:
Below is the error stack from stage 'make test':
[MSG] [Wed Sep 27 17:58:45 2006] Trying to get 'http://www.cpan.org/authors/id/O/OV/OVID/TAPx-Parser-0.31.tar.gz'
[MSG] [Wed Sep 27 17:58:46 2006] Trying to get 'http://www.cpan.org/authors/id/O/OV/OVID/CHECKSUMS'
[MSG] [Wed Sep 27 17:58:47 2006] Checksum matches for 'TAPx-Parser-0.31.tar.gz'
[MSG] [Wed Sep 27 17:58:48 2006] Extracted 'TAPx-Parser-0.31/'
[MSG] [Wed Sep 27 17:58:48 2006] Extracted 'TAPx-Parser-0.31/Build.PL'
[MSG] [Wed Sep 27 17:58:48 2006] Extracted 'TAPx-Parser-0.31/Changes'
[MSG] [Wed Sep 27 17:58:48 2006] Extracted 'TAPx-Parser-0.31/examples/'
[MSG] [Wed Sep 27 17:58:48 2006] Extracted 'TAPx-Parser-0.31/examples/README'
[MSG] [Wed Sep 27 17:58:48 2006] Extracted 'TAPx-Parser-0.31/examples/t/'
[MSG] [Wed Sep 27 17:58:48 2006] Extracted 'TAPx-Parser-0.31/examples/t/10-stuff.t'
[MSG] [Wed Sep 27 17:58:48 2006] Extracted 'TAPx-Parser-0.31/examples/tprove'
[MSG] [Wed Sep 27 17:58:48 2006] Extracted 'TAPx-Parser-0.31/examples/tprove_color'
[MSG] [Wed Sep 27 17:58:48 2006] Extracted 'TAPx-Parser-0.31/examples/tprove_gtk'
[MSG] [Wed Sep 27 17:58:48 2006] Extracted 'TAPx-Parser-0.31/lib/'
[MSG] [Wed Sep 27 17:58:48 2006] Extracted 'TAPx-Parser-0.31/lib/TAPx/'
[MSG] [Wed Sep 27 17:58:48 2006] Extracted 'TAPx-Parser-0.31/lib/TAPx/Parser/'
[MSG] [Wed Sep 27 17:58:48 2006] Extracted 'TAPx-Parser-0.31/lib/TAPx/Parser/Aggregator.pm'
[MSG] [Wed Sep 27 17:58:48 2006] Extracted 'TAPx-Parser-0.31/lib/TAPx/Parser/Builder.pm'
[MSG] [Wed Sep 27 17:58:48 2006] Extracted 'TAPx-Parser-0.31/lib/TAPx/Parser/Grammar.pm'
[MSG] [Wed Sep 27 17:58:48 2006] Extracted 'TAPx-Parser-0.31/lib/TAPx/Parser/Iterator.pm'
[MSG] [Wed Sep 27 17:58:48 2006] Extracted 'TAPx-Parser-0.31/lib/TAPx/Parser/Results/'
[MSG] [Wed Sep 27 17:58:48 2006] Extracted 'TAPx-Parser-0.31/lib/TAPx/Parser/Results/Bailout.pm'
[MSG] [Wed Sep 27 17:58:48 2006] Extracted 'TAPx-Parser-0.31/lib/TAPx/Parser/Results/Comment.pm'
[MSG] [Wed Sep 27 17:58:48 2006] Extracted 'TAPx-Parser-0.31/lib/TAPx/Parser/Results/Plan.pm'
[MSG] [Wed Sep 27 17:58:48 2006] Extracted 'TAPx-Parser-0.31/lib/TAPx/Parser/Results/Test.pm'
[MSG] [Wed Sep 27 17:58:48 2006] Extracted 'TAPx-Parser-0.31/lib/TAPx/Parser/Results/Unknown.pm'
[MSG] [Wed Sep 27 17:58:48 2006] Extracted 'TAPx-Parser-0.31/lib/TAPx/Parser/Results.pm'
[MSG] [Wed Sep 27 17:58:48 2006] Extracted 'TAPx-Parser-0.31/lib/TAPx/Parser/Source/'
[MSG] [Wed Sep 27 17:58:48 2006] Extracted 'TAPx-Parser-0.31/lib/TAPx/Parser/Source/Perl.pm'
[MSG] [Wed Sep 27 17:58:48 2006] Extracted 'TAPx-Parser-0.31/lib/TAPx/Parser/Streamed.pm'
[MSG] [Wed Sep 27 17:58:48 2006] Extracted 'TAPx-Parser-0.31/lib/TAPx/Parser.pm'
[MSG] [Wed Sep 27 17:58:48 2006] Extracted 'TAPx-Parser-0.31/Makefile.PL'
[MSG] [Wed Sep 27 17:58:48 2006] Extracted 'TAPx-Parser-0.31/MANIFEST'
[MSG] [Wed Sep 27 17:58:48 2006] Extracted 'TAPx-Parser-0.31/META.yml'
[MSG] [Wed Sep 27 17:58:48 2006] Extracted 'TAPx-Parser-0.31/README'
[MSG] [Wed Sep 27 17:58:48 2006] Extracted 'TAPx-Parser-0.31/t/'
[MSG] [Wed Sep 27 17:58:48 2006] Extracted 'TAPx-Parser-0.31/t/00-load.t'
[MSG] [Wed Sep 27 17:58:48 2006] Extracted 'TAPx-Parser-0.31/t/10-regression.t'
[MSG] [Wed Sep 27 17:58:48 2006] Extracted 'TAPx-Parser-0.31/t/20-parse.t'
[MSG] [Wed Sep 27 17:58:48 2006] Extracted 'TAPx-Parser-0.31/t/30-bailout.t'
[MSG] [Wed Sep 27 17:58:48 2006] Extracted 'TAPx-Parser-0.31/t/40-errors.t'
[MSG] [Wed Sep 27 17:58:48 2006] Extracted 'TAPx-Parser-0.31/t/50-streams.t'
[MSG] [Wed Sep 27 17:58:48 2006] Extracted 'TAPx-Parser-0.31/t/60-aggregator.t'
[MSG] [Wed Sep 27 17:58:48 2006] Extracted 'TAPx-Parser-0.31/t/70-callbacks.t'
[MSG] [Wed Sep 27 17:58:48 2006] Extracted 'TAPx-Parser-0.31/t/80-premature-bailout.t'
[MSG] [Wed Sep 27 17:58:48 2006] Extracted 'TAPx-Parser-0.31/t/90-iterators.t'
[MSG] [Wed Sep 27 17:58:48 2006] Extracted 'TAPx-Parser-0.31/t/pod-coverage.t'
[MSG] [Wed Sep 27 17:58:48 2006] Extracted 'TAPx-Parser-0.31/t/pod.t'
[MSG] [Wed Sep 27 17:58:48 2006] Extracted 'TAPx-Parser-0.31/t/sample-tests/'
[MSG] [Wed Sep 27 17:58:48 2006] Extracted 'TAPx-Parser-0.31/t/sample-tests/bailout'
[MSG] [Wed Sep 27 17:58:48 2006] Extracted 'TAPx-Parser-0.31/t/sample-tests/bignum'
[MSG] [Wed Sep 27 17:58:48 2006] Extracted 'TAPx-Parser-0.31/t/sample-tests/bignum_many'
[MSG] [Wed Sep 27 17:58:48 2006] Extracted 'TAPx-Parser-0.31/t/sample-tests/combined'
[MSG] [Wed Sep 27 17:58:48 2006] Extracted 'TAPx-Parser-0.31/t/sample-tests/descriptive'
[MSG] [Wed Sep 27 17:58:48 2006] Extracted 'TAPx-Parser-0.31/t/sample-tests/die'
[MSG] [Wed Sep 27 17:58:48 2006] Extracted 'TAPx-Parser-0.31/t/sample-tests/die_head_end'
[MSG] [Wed Sep 27 17:58:48 2006] Extracted 'TAPx-Parser-0.31/t/sample-tests/die_last_minute'
[MSG] [Wed Sep 27 17:58:48 2006] Extracted 'TAPx-Parser-0.31/t/sample-tests/duplicates'
[MSG] [Wed Sep 27 17:58:48 2006] Extracted 'TAPx-Parser-0.31/t/sample-tests/head_end'
[MSG] [Wed Sep 27 17:58:48 2006] Extracted 'TAPx-Parser-0.31/t/sample-tests/head_fail'
[MSG] [Wed Sep 27 17:58:48 2006] Extracted 'TAPx-Parser-0.31/t/sample-tests/inc_taint'
[MSG] [Wed Sep 27 17:58:48 2006] Extracted 'TAPx-Parser-0.31/t/sample-tests/no_nums'
[MSG] [Wed Sep 27 17:58:48 2006] Extracted 'TAPx-Parser-0.31/t/sample-tests/no_output'
[MSG] [Wed Sep 27 17:58:48 2006] Extracted 'TAPx-Parser-0.31/t/sample-tests/out_of_order'
[MSG] [Wed Sep 27 17:58:48 2006] Extracted 'TAPx-Parser-0.31/t/sample-tests/segfault'
[MSG] [Wed Sep 27 17:58:48 2006] Extracted 'TAPx-Parser-0.31/t/sample-tests/sequence_misparse'
[MSG] [Wed Sep 27 17:58:48 2006] Extracted 'TAPx-Parser-0.31/t/sample-tests/shbang_misparse'
[MSG] [Wed Sep 27 17:58:48 2006] Extracted 'TAPx-Parser-0.31/t/sample-tests/simple'
[MSG] [Wed Sep 27 17:58:48 2006] Extracted 'TAPx-Parser-0.31/t/sample-tests/simple_fail'
[MSG] [Wed Sep 27 17:58:48 2006] Extracted 'TAPx-Parser-0.31/t/sample-tests/skip'
[MSG] [Wed Sep 27 17:58:48 2006] Extracted 'TAPx-Parser-0.31/t/sample-tests/skip_nomsg'
[MSG] [Wed Sep 27 17:58:48 2006] Extracted 'TAPx-Parser-0.31/t/sample-tests/skipall'
[MSG] [Wed Sep 27 17:58:48 2006] Extracted 'TAPx-Parser-0.31/t/sample-tests/skipall_nomsg'
[MSG] [Wed Sep 27 17:58:48 2006] Extracted 'TAPx-Parser-0.31/t/sample-tests/stdout_stderr'
[MSG] [Wed Sep 27 17:58:48 2006] Extracted 'TAPx-Parser-0.31/t/sample-tests/switches'
[MSG] [Wed Sep 27 17:58:48 2006] Extracted 'TAPx-Parser-0.31/t/sample-tests/taint'
[MSG] [Wed Sep 27 17:58:48 2006] Extracted 'TAPx-Parser-0.31/t/sample-tests/todo_inline'
[MSG] [Wed Sep 27 17:58:48 2006] Extracted 'TAPx-Parser-0.31/t/sample-tests/todo_misparse'
[MSG] [Wed Sep 27 17:58:48 2006] Extracted 'TAPx-Parser-0.31/t/sample-tests/too_many'
[MSG] [Wed Sep 27 17:58:48 2006] Extracted 'TAPx-Parser-0.31/t/sample-tests/vms_nit'
[MSG] [Wed Sep 27 17:58:48 2006] Extracted 'TAPx-Parser-0.31/TODO'
[MSG] [Wed Sep 27 17:58:48 2006] Extracted 'TAPx::Parser' to '/home/chris/.cpanplus/5.8.8/build/TAPx-Parser-0.31'
[MSG] [Wed Sep 27 17:58:49 2006] Checking if your kit is complete...
Looks good
Writing Makefile for TAPx::Parser
[MSG] [Wed Sep 27 17:58:49 2006] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value'
[MSG] [Wed Sep 27 17:58:52 2006] cp lib/TAPx/Parser/Results/Plan.pm blib/lib/TAPx/Parser/Results/Plan.pm
cp lib/TAPx/Parser/Results/Test.pm blib/lib/TAPx/Parser/Results/Test.pm
cp lib/TAPx/Parser/Results.pm blib/lib/TAPx/Parser/Results.pm
cp lib/TAPx/Parser/Builder.pm blib/lib/TAPx/Parser/Builder.pm
cp lib/TAPx/Parser/Results/Bailout.pm blib/lib/TAPx/Parser/Results/Bailout.pm
cp lib/TAPx/Parser/Aggregator.pm blib/lib/TAPx/Parser/Aggregator.pm
cp lib/TAPx/Parser/Grammar.pm blib/lib/TAPx/Parser/Grammar.pm
cp lib/TAPx/Parser.pm blib/lib/TAPx/Parser.pm
cp lib/TAPx/Parser/Source/Perl.pm blib/lib/TAPx/Parser/Source/Perl.pm
cp lib/TAPx/Parser/Results/Comment.pm blib/lib/TAPx/Parser/Results/Comment.pm
cp lib/TAPx/Parser/Streamed.pm blib/lib/TAPx/Parser/Streamed.pm
cp lib/TAPx/Parser/Iterator.pm blib/lib/TAPx/Parser/Iterator.pm
cp lib/TAPx/Parser/Results/Unknown.pm blib/lib/TAPx/Parser/Results/Unknown.pm
Manifying blib/man3/TAPx::Parser::Results::Test.3
Manifying blib/man3/TAPx::Parser::Results::Plan.3
Manifying blib/man3/TAPx::Parser::Results.3
Manifying blib/man3/TAPx::Parser::Builder.3
Manifying blib/man3/TAPx::Parser::Results::Bailout.3
Manifying blib/man3/TAPx::Parser::Grammar.3
Manifying blib/man3/TAPx::Parser::Aggregator.3
Manifying blib/man3/TAPx::Parser.3
Manifying blib/man3/TAPx::Parser::Source::Perl.3
Manifying blib/man3/TAPx::Parser::Results::Comment.3
Manifying blib/man3/TAPx::Parser::Iterator.3
Manifying blib/man3/TAPx::Parser::Streamed.3
Manifying blib/man3/TAPx::Parser::Results::Unknown.3
[ERROR] [Wed Sep 27 17:59:03 2006] MAKE TEST failed: No such file or directory PERL_DL_NONLAZY=1 /usr/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
t/00-load.................# Testing TAPx::Parser 0.31, Perl 5.008008, /usr/bin/perl
ok
t/10-regression...........Can't locate TAPX/Parser/Builder.pm in @INC (@INC contains: lib /home/chris/.cpanplus/5.8.8/build/TAPx-Parser-0.31/blib/lib /home/chris/.cpanplus/5.8.8/build/TAPx-Parser-0.31/blib/arch /home/chris/.cpanplus/5.8.8/build/TAPx-Parser-0.31/blib /usr/lib/perl5/5.8.8/i386-netbsd-thread-multi-64int /usr/lib/perl5/5.8.8/i386-netbsd-thread-multi-64int /usr/lib/perl5/5.8.8 /usr/lib/perl5/site_perl/5.8.8/i386-netbsd-thread-multi-64int /usr/lib/perl5/site_perl/5.8.8/i386-netbsd-thread-multi-64int /usr/lib/perl5/site_perl/5.8.8 /usr/lib/perl5/site_perl/5.8.8/i386-netbsd-thread-multi-64int /usr/lib/perl5/site_perl/5.8.8 /usr/lib/perl5/site_perl . /usr/lib/perl5/5.8.8/i386-netbsd-thread-multi-64int /usr/lib/perl5/5.8.8 /usr/lib/perl5/site_perl/5.8.8/i386-netbsd-thread-multi-64int /usr/lib/perl5/site_perl/5.8.8 /usr/lib/perl5/site_perl .).
BEGIN failed--compilation aborted.
# Looks like your test died before it could output anything.
# Failed test '... and we should have the correct number of results'
# in t/10-regression.t at line 2297.
# Failed test '... and good_plan should return a reasonable value'
# in t/10-regression.t at line 2253.
# Failed test '... and parse_errors should be the correct amount'
# in t/10-regression.t at line 2263.
# got: '1'
# expected: '0'
# Failed test '...... and the correct values'
# in t/10-regression.t at line 2265.
# Structures begin differing at:
# $got->[0] = 'No plan found in TAP output'
# $expected->[0] = Does not exist
# @got = (
# 'No plan found in TAP output'
# );
# @expected = ();
# Failed test '... and tests_run should equal 5'
# in t/10-regression.t at line 2259.
# got: '0'
# expected: '5'
# Failed test '... and actual_passed should be the correct amount'
# in t/10-regression.t at line 2263.
# got: '0'
# expected: '5'
# Failed test '...... and the correct values'
# in t/10-regression.t at line 2265.
# Structures begin differing at:
# $got->[0] = Does not exist
# $expected->[0] = '1'
# @got = ();
# @expected = (
# 1,
# 2,
# 3,
# 4,
# 5
# );
# Failed test '... and exit should equal 0'
# in t/10-regression.t at line 2259.
# got: '255'
# expected: '0'
# Failed test '... and passed should be the correct amount'
# in t/10-regression.t at line 2263.
# got: '0'
# expected: '5'
# Failed test '...... and the correct values'
# in t/10-regression.t at line 2265.
# Structures begin differing at:
# $got->[0] = Does not exist
# $expected->[0] = '1'
# @got = ();
# @expected = (
# 1,
# 2,
# 3,
# 4,
# 5
# );
# Failed test '... and is_good_plan should return a reasonable value'
# in t/10-regression.t at line 2253.
# Failed test '... and wait should equal 0'
# in t/10-regression.t at line 2259.
# got: '65280'
# expected: '0'
# Failed test '... and plan should equal 1..5'
# in t/10-regression.t at line 2259.
# got: ''
# expected: '1..5'
# Failed test '... and tests_planned should equal 5'
# in t/10-regression.t at line 2259.
# got: undef
# expected: '5'
Can't locate TAPX/Parser/Builder.pm in @INC (@INC contains: lib /home/chris/.cpanplus/5.8.8/build/TAPx-Parser-0.31/blib/lib /home/chris/.cpanplus/5.8.8/build/TAPx-Parser-0.31/blib/arch /home/chris/.cpanplus/5.8.8/build/TAPx-Parser-0.31/blib /usr/lib/perl5/5.8.8/i386-netbsd-thread-multi-64int /usr/lib/perl5/5.8.8/i386-netbsd-thread-multi-64int /usr/lib/perl5/5.8.8 /usr/lib/perl5/site_perl/5.8.8/i386-netbsd-thread-multi-64int /usr/lib/perl5/site_perl/5.8.8/i386-netbsd-thread-multi-64int /usr/lib/perl5/site_perl/5.8.8 /usr/lib/perl5/site_perl/5.8.8/i386-netbsd-thread-multi-64int /usr/lib/perl5/site_perl/5.8.8 /usr/lib/perl5/site_perl . /usr/lib/perl5/5.8.8/i386-netbsd-thread-multi-64int /usr/lib/perl5/5.8.8 /usr/lib/perl5/site_perl/5.8.8/i386-netbsd-thread-multi-64int /usr/lib/perl5/site_perl/5.8.8 /usr/lib/perl5/site_perl .).
BEGIN failed--compilation aborted.
# Looks like your test died before it could output anything.
# Failed test '... and we should have the correct number of results'
# in t/10-regression.t at line 2297.
# Failed test '... and parse_errors should be the correct amount'
# in t/10-regression.t at line 2263.
# got: '1'
# expected: '3'
# Failed test '...... and the correct values'
# in t/10-regression.t at line 2265.
# Structures begin differing at:
# $got->[0] = 'No plan found in TAP output'
# $expected->[0] = 'Tests out of sequence. Found (136211425) but expected (3)'
# @got = (
# 'No plan found in TAP output'
# );
# @expected = (
# 'Tests out of sequence. Found (136211425) but expected (3)',
# 'Tests out of sequence. Found (136211426) but expected (4)',
# 'Bad plan. You planned 2 tests but ran 4.'
# );
# Failed test '... and tests_run should equal 4'
# in t/10-regression.t at line 2259.
# got: '0'
# expected: '4'
# Failed test '... and actual_passed should be the correct amount'
# in t/10-regression.t at line 2263.
# got: '0'
# expected: '4'
# Failed test '...... and the correct values'
# in t/10-regression.t at line 2265.
# Structures begin differing at:
# $got->[0] = Does not exist
# $expected->[0] = '1'
# @got = ();
# @expected = (
# 1,
# 2,
# 136211425,
# 136211426
# );
# Failed test '... and exit should equal 0'
# in t/10-regression.t at line 2259.
# got: '255'
# expected: '0'
# Failed test '... and passed should be the correct amount'
# in t/10-regression.t at line 2263.
# got: '0'
# expected: '4'
# Failed test '...... and the correct values'
# in t/10-regression.t at line 2265.
# Structures begin differing at:
# $got->[0] = Does not exist
# $expected->[0] = '1'
# @got = ();
# @expected = (
# 1,
# 2,
# 136211425,
# 136211426
# );
# Failed test '... and wait should equal 0'
# in t/10-regression.t at line 2259.
# got: '65280'
# expected: '0'
# Failed test '... and plan should equal 1..2'
# in t/10-regression.t at line 2259.
# got: ''
# expected: '1..2'
# Failed test '... and tests_planned should equal 2'
# in t/10-regression.t at line 2259.
# got: undef
# expected: '2'
Can't locate TAPX/Parser/Builder.pm in @INC (@INC contains: lib /home/chris/.cpanplus/5.8.8/build/TAPx-Parser-0.31/blib/lib /home/chris/.cpanplus/5.8.8/build/TAPx-Parser-0.31/blib/arch /home/chris/.cpanplus/5.8.8/build/TAPx-Parser-0.31/blib /usr/lib/perl5/5.8.8/i386-netbsd-thread-multi-64int /usr/lib/perl5/5.8.8/i386-netbsd-thread-multi-64int /usr/lib/perl5/5.8.8 /usr/lib/perl5/site_perl/5.8.8/i386-netbsd-thread-multi-64int /usr/lib/perl5/site_perl/5.8.8/i386-netbsd-thread-multi-64int /usr/lib/perl5/site_perl/5.8.8 /usr/lib/perl5/site_perl/5.8.8/i386-netbsd-thread-multi-64int /usr/lib/perl5/site_perl/5.8.8 /usr/lib/perl5/site_perl . /usr/lib/perl5/5.8.8/i386-netbsd-thread-multi-64int /usr/lib/perl5/5.8.8 /usr/lib/perl5/site_perl/5.8.8/i386-netbsd-thread-multi-64int /usr/lib/perl5/site_perl/5.8.8 /usr/lib/perl5/site_perl .).
BEGIN failed--compilation aborted.
# Looks like your test died before it could output anything.
# Failed test '... and we should have the correct number of results'
# in t/10-regression.t at line 2297.
# Failed test '... and parse_errors should be the correct amount'
# in t/10-regression.t at line 2263.
# got: '1'
# expected: '10'
# Failed test '...... and the correct values'
# in t/10-regression.t at line 2265.
# Structures begin differing at:
# $got->[0] = 'No plan found in TAP output'
# $expected->[0] = 'Tests out of sequence. Found (99997) but expected (3)'
# @got = (
# 'No plan found in TAP output'
# );
# @expected = (
# 'Tests out of sequence. Found (99997) but expected (3)',
# 'Tests out of sequence. Found (99998) but expected (4)',
# 'Tests out of sequence. Found (99999) but expected (5)',
# 'Tests out of sequence. Found (100000) but expected (6)',
# 'Tests out of sequence. Found (100001) but expected (7)',
# 'Tests out of sequence. Found (100002) but expected (8)',
# 'Tests out of sequence. Found (100003) but expected (9)',
# 'Tests out of sequence. Found (100004) but expected (10)',
# 'Tests out of sequence. Found (100005) but expected (11)',
# 'Bad plan. You planned 2 tests but ran 11.'
# );
# Failed test '... and tests_run should equal 11'
# in t/10-regression.t at line 2259.
# got: '0'
# expected: '11'
# Failed test '... and actual_passed should be the correct amount'
# in t/10-regression.t at line 2263.
# got: '0'
# expected: '11'
# Failed test '...... and the correct values'
# in t/10-regression.t at line 2265.
# Structures begin differing at:
# $got->[0] = Does not exist
# $expected->[0] = '1'
# @got = ();
# @expected = (
# 1,
# 2,
# 99997,
# 99998,
# 99999,
# 100000,
# 100001,
# 100002,
# 100003,
# 100004,
# 100005
# );
# Failed test '... and exit should equal 0'
# in t/10-regression.t at line 2259.
# got: '255'
# expected: '0'
# Failed test '... and passed should be the correct amount'
# in t/10-regression.t at line 2263.
# got: '0'
# expected: '11'
# Failed test '...... and the correct values'
# in t/10-regression.t at line 2265.
# Structures begin differing at:
# $got->[0] = Does not exist
# $expected->[0] = '1'
# @got = ();
# @expected = (
# 1,
# 2,
# 99997,
# 99998,
# 99999,
# 100000,
# 100001,
# 100002,
# 100003,
# 100004,
# 100005
# );
# Failed test '... and wait should equal 0'
# in t/10-regression.t at line 2259.
# got: '65280'
# expected: '0'
# Failed test '... and plan should equal 1..2'
# in t/10-regression.t at line 2259.
# got: ''
# expected: '1..2'
# Failed test '... and tests_planned should equal 2'
# in t/10-regression.t at line 2259.
# got: undef
# expected: '2'
Can't locate TAPX/Parser/Builder.pm in @INC (@INC contains: lib /home/chris/.cpanplus/5.8.8/build/TAPx-Parser-0.31/blib/lib /home/chris/.cpanplus/5.8.8/build/TAPx-Parser-0.31/blib/arch /home/chris/.cpanplus/5.8.8/build/TAPx-Parser-0.31/blib /usr/lib/perl5/5.8.8/i386-netbsd-thread-multi-64int /usr/lib/perl5/5.8.8/i386-netbsd-thread-multi-64int /usr/lib/perl5/5.8.8 /usr/lib/perl5/site_perl/5.8.8/i386-netbsd-thread-multi-64int /usr/lib/perl5/site_perl/5.8.8/i386-netbsd-thread-multi-64int /usr/lib/perl5/site_perl/5.8.8 /usr/lib/perl5/site_perl/5.8.8/i386-netbsd-thread-multi-64int /usr/lib/perl5/site_perl/5.8.8 /usr/lib/perl5/site_perl . /usr/lib/perl5/5.8.8/i386-netbsd-thread-multi-64int /usr/lib/perl5/5.8.8 /usr/lib/perl5/site_perl/5.8.8/i386-netbsd-thread-multi-64int /usr/lib/perl5/site_perl/5.8.8 /usr/lib/perl5/site_perl .).
BEGIN failed--compilation aborted.
# Looks like your test died before it could output anything.
# Failed test '... and we should have the correct number of results'
# in t/10-regression.t at line 2297.
# Failed test '... and good_plan should return a reasonable value'
# in t/10-regression.t at line 2253.
# Failed test '... and parse_errors should be the correct amount'
# in t/10-regression.t at line 2263.
# got: '1'
# expected: '0'
# Failed test '...... and the correct values'
# in t/10-regression.t at line 2265.
# Structures begin differing at:
# $got->[0] = 'No plan found in TAP output'
# $expected->[0] = Does not exist
# @got = (
# 'No plan found in TAP output'
# );
# @expected = ();
# Failed test '... and tests_run should equal 10'
# in t/10-regression.t at line 2259.
# got: '0'
# expected: '10'
# Failed test '... and actual_passed should be the correct amount'
# in t/10-regression.t at line 2263.
# got: '0'
# expected: '7'
# Failed test '...... and the correct values'
# in t/10-regression.t at line 2265.
# Structures begin differing at:
# $got->[0] = Does not exist
# $expected->[0] = '1'
# @got = ();
# @expected = (
# 1,
# 2,
# 5,
# 6,
# 7,
# 8,
# 9
# );
# Failed test '... and exit should equal 0'
# in t/10-regression.t at line 2259.
# got: '255'
# expected: '0'
# Failed test '... and passed should be the correct amount'
# in t/10-regression.t at line 2263.
# got: '0'
# expected: '8'
# Failed test '...... and the correct values'
# in t/10-regression.t at line 2265.
# Structures begin differing at:
# $got->[0] = Does not exist
# $expected->[0] = '1'
# @got = ();
# @expected = (
# 1,
# 2,
# 4,
# 5,
# 6,
# 7,
# 8,
# 9
# );
# Failed test '... and failed should be the correct amount'
# in t/10-regression.t at line 2263.
# got: '0'
# expected: '2'
# Failed test '...... and the correct values'
# in t/10-regression.t at line 2265.
# Structures begin differing at:
# $got->[0] = Does not exist
# $expected->[0] = '3'
# @got = ();
# @expected = (
# 3,
# 10
# );
# Failed test '... and skipped should be the correct amount'
# in t/10-regression.t at line 2263.
# got: '0'
# expected: '1'
# Failed test '...... and the correct values'
# in t/10-regression.t at line 2265.
# Structures begin differing at:
# $got->[0] = Does not exist
# $expected->[0] = '7'
# @got = ();
# @expected = (
# 7
# );
# Failed test '... and is_good_plan should return a reasonable value'
# in t/10-regression.t at line 2253.
# Failed test '... and actual_failed should be the correct amount'
# in t/10-regression.t at line 2263.
# got: '0'
# expected: '3'
# Failed test '...... and the correct values'
# in t/10-regression.t at line 2265.
# Structures begin differing at:
# $got->[0] = Does not exist
# $expected->[0] = '3'
# @got = ();
# @expected = (
# 3,
# 4,
# 10
# );
# Failed test '... and todo_failed should be the correct amount'
# in t/10-regression.t at line 2263.
# got: '0'
# expected: '1'
# Failed test '...... and the correct values'
# in t/10-regression.t at line 2265.
# Structures begin differing at:
# $got->[0] = Does not exist
# $expected->[0] = '9'
# @got = ();
# @expected = (
# 9
# );
# Failed test '... and wait should equal 0'
# in t/10-regression.t at line 2259.
# got: '65280'
# expected: '0'
# Failed test '... and plan should equal 1..10'
# in t/10-regression.t at line 2259.
# got: ''
# expected: '1..10'
# Failed test '... and tests_planned should equal 10'
# in t/10-regression.t at line 2259.
# got: undef
# expected: '10'
# Failed test '... and todo should be the correct amount'
# in t/10-regression.t at line 2263.
# got: '0'
# expected: '2'
# Failed test '...... and the correct values'
# in t/10-regression.t at line 2265.
# Structures begin differing at:
# $got->[0] = Does not exist
# $expected->[0] = '4'
# @got = ();
# @expected = (
# 4,
# 9
# );
Can't locate TAPX/Parser/Builder.pm in @INC (@INC contains: lib /home/chris/.cpanplus/5.8.8/build/TAPx-Parser-0.31/blib/lib /home/chris/.cpanplus/5.8.8/build/TAPx-Parser-0.31/blib/arch /home/chris/.cpanplus/5.8.8/build/TAPx-Parser-0.31/blib /usr/lib/perl5/5.8.8/i386-netbsd-thread-multi-64int /usr/lib/perl5/5.8.8/i386-netbsd-thread-multi-64int /usr/lib/perl5/5.8.8 /usr/lib/perl5/site_perl/5.8.8/i386-netbsd-thread-multi-64int /usr/lib/perl5/site_perl/5.8.8/i386-netbsd-thread-multi-64int /usr/lib/perl5/site_perl/5.8.8 /usr/lib/perl5/site_perl/5.8.8/i386-netbsd-thread-multi-64int /usr/lib/perl5/site_perl/5.8.8 /usr/lib/perl5/site_perl . /usr/lib/perl5/5.8.8/i386-netbsd-thread-multi-64int /usr/lib/perl5/5.8.8 /usr/lib/perl5/site_perl/5.8.8/i386-netbsd-thread-multi-64int /usr/lib/perl5/site_perl/5.8.8 /usr/lib/perl5/site_perl .).
BEGIN failed--compilation aborted.
# Looks like your test died before it could output anything.
# Failed test '... and we should have the correct number of results'
# in t/10-regression.t at line 2297.
# Failed test '... and good_plan should return a reasonable value'
# in t/10-regression.t at line 2253.
# Failed test '... and parse_errors should be the correct amount'
# in t/10-regression.t at line 2263.
# got: '1'
# expected: '0'
# Failed test '...... and the correct values'
# in t/10-regression.t at line 2265.
# Structures begin differing at:
# $got->[0] = 'No plan found in TAP output'
# $expected->[0] = Does not exist
# @got = (
# 'No plan found in TAP output'
# );
# @expected = ();
# Failed test '... and tests_run should equal 5'
# in t/10-regression.t at line 2259.
# got: '0'
# expected: '5'
# Failed test '... and actual_passed should be the correct amount'
# in t/10-regression.t at line 2263.
# got: '0'
# expected: '5'
# Failed test '...... and the correct values'
# in t/10-regression.t at line 2265.
# Structures begin differing at:
# $got->[0] = Does not exist
# $expected->[0] = '1'
# @got = ();
# @expected = (
# 1,
# 2,
# 3,
# 4,
# 5
# );
# Failed test '... and exit should equal 0'
# in t/10-regression.t at line 2259.
# got: '255'
# expected: '0'
# Failed test '... and passed should be the correct amount'
# in t/10-regression.t at line 2263.
# got: '0'
# expected: '5'
# Failed test '...... and the correct values'
# in t/10-regression.t at line 2265.
# Structures begin differing at:
# $got->[0] = Does not exist
# $expected->[0] = '1'
# @got = ();
# @expected = (
# 1,
# 2,
# 3,
# 4,
# 5
# );
# Failed test '... and is_good_plan should return a reasonable value'
# in t/10-regression.t at line 2253.
# Failed test '... and wait should equal 0'
# in t/10-regression.t at line 2259.
# got: '65280'
# expected: '0'
# Failed test '... and plan should equal 1..5'
# in t/10-regression.t at line 2259.
# got: ''
# expected: '1..5'
# Failed test '... and tests_planned should equal 5'
# in t/10-regression.t at line 2259.
# got: undef
# expected: '5'
Can't locate TAPX/Parser/Builder.pm in @INC (@INC contains: lib /home/chris/.cpanplus/5.8.8/build/TAPx-Parser-0.31/blib/lib /home/chris/.cpanplus/5.8.8/build/TAPx-Parser-0.31/blib/arch /home/chris/.cpanplus/5.8.8/build/TAPx-Parser-0.31/blib /usr/lib/perl5/5.8.8/i386-netbsd-thread-multi-64int /usr/lib/perl5/5.8.8/i386-netbsd-thread-multi-64int /usr/lib/perl5/5.8.8 /usr/lib/perl5/site_perl/5.8.8/i386-netbsd-thread-multi-64int /usr/lib/perl5/site_perl/5.8.8/i386-netbsd-thread-multi-64int /usr/lib/perl5/site_perl/5.8.8 /usr/lib/perl5/site_perl/5.8.8/i386-netbsd-thread-multi-64int /usr/lib/perl5/site_perl/5.8.8 /usr/lib/perl5/site_perl . /usr/lib/perl5/5.8.8/i386-netbsd-thread-multi-64int /usr/lib/perl5/5.8.8 /usr/lib/perl5/site_perl/5.8.8/i386-netbsd-thread-multi-64int /usr/lib/perl5/site_perl/5.8.8 /usr/lib/perl5/site_perl .).
BEGIN failed--compilation aborted.
# Looks like your test died before it could output anything.
# Failed test '... and exit should equal 1'
# in t/10-regression.t at line 2259.
# got: '255'
# expected: '1'
Can't locate TAPX/Parser/Builder.pm in @INC (@INC contains: lib /home/chris/.cpanplus/5.8.8/build/TAPx-Parser-0.31/blib/lib /home/chris/.cpanplus/5.8.8/build/TAPx-Parser-0.31/blib/arch /home/chris/.cpanplus/5.8.8/build/TAPx-Parser-0.31/blib /usr/lib/perl5/5.8.8/i386-netbsd-thread-multi-64int /usr/lib/perl5/5.8.8/i386-netbsd-thread-multi-64int /usr/lib/perl5/5.8.8 /usr/lib/perl5/site_perl/5.8.8/i386-netbsd-thread-multi-64int /usr/lib/perl5/site_perl/5.8.8/i386-netbsd-thread-multi-64int /usr/lib/perl5/site_perl/5.8.8 /usr/lib/perl5/site_perl/5.8.8/i386-netbsd-thread-multi-64int /usr/lib/perl5/site_perl/5.8.8 /usr/lib/perl5/site_perl . /usr/lib/perl5/5.8.8/i386-netbsd-thread-multi-64int /usr/lib/perl5/5.8.8 /usr/lib/perl5/site_perl/5.8.8/i386-netbsd-thread-multi-64int /usr/lib/perl5/site_perl/5.8.8 /usr/lib/perl5/site_perl .).
BEGIN failed--compilation aborted.
# Looks like your test died before it could output anything.
# Failed test '... and we should have the correct number of results'
# in t/10-regression.t at line 2297.
# Failed test '... and tests_run should equal 4'
# in t/10-regression.t at line 2259.
# got: '0'
# expected: '4'
# Failed test '... and actual_passed should be the correct amount'
# in t/10-regression.t at line 2263.
# got: '0'
# expected: '4'
# Failed test '...... and the correct values'
# in t/10-regression.t at line 2265.
# Structures begin differing at:
# $got->[0] = Does not exist
# $expected->[0] = '1'
# @got = ();
# @expected = (
# 1,
# 2,
# 3,
# 4
# );
# Failed test '... and exit should equal 1'
# in t/10-regression.t at line 2259.
# got: '255'
# expected: '1'
# Failed test '... and passed should be the correct amount'
# in t/10-regression.t at line 2263.
# got: '0'
# expected: '4'
# Failed test '...... and the correct values'
# in t/10-regression.t at line 2265.
# Structures begin differing at:
# $got->[0] = Does not exist
# $expected->[0] = '1'
# @got = ();
# @expected = (
# 1,
# 2,
# 3,
# 4
# );
Can't locate TAPX/Parser/Builder.pm in @INC (@INC contains: lib /home/chris/.cpanplus/5.8.8/build/TAPx-Parser-0.31/blib/lib /home/chris/.cpanplus/5.8.8/build/TAPx-Parser-0.31/blib/arch /home/chris/.cpanplus/5.8.8/build/TAPx-Parser-0.31/blib /usr/lib/perl5/5.8.8/i386-netbsd-thread-multi-64int /usr/lib/perl5/5.8.8/i386-netbsd-thread-multi-64int /usr/lib/perl5/5.8.8 /usr/lib/perl5/site_perl/5.8.8/i386-netbsd-thread-multi-64int /usr/lib/perl5/site_perl/5.8.8/i386-netbsd-thread-multi-64int /usr/lib/perl5/site_perl/5.8.8 /usr/lib/perl5/site_perl/5.8.8/i386-netbsd-thread-multi-64int /usr/lib/perl5/site_perl/5.8.8 /usr/lib/perl5/site_perl . /usr/lib/perl5/5.8.8/i386-netbsd-thread-multi-64int /usr/lib/perl5/5.8.8 /usr/lib/perl5/site_perl/5.8.8/i386-netbsd-thread-multi-64int /usr/lib/perl5/site_perl/5.8.8 /usr/lib/perl5/site_perl .).
BEGIN failed--compilation aborted.
# Looks like your test died before it could output anything.
# Failed test '... and we should have the correct number of results'
# in t/10-regression.t at line 2297.
# Failed test '... and good_plan should return a reasonable value'
# in t/10-regression.t at line 2253.
# Failed test '... and parse_errors should be the correct amount'
# in t/10-regression.t at line 2263.
# got: '1'
# expected: '0'
# Failed test '...... and the correct values'
# in t/10-regression.t at line 2265.
# Structures begin differing at:
# $got->[0] = 'No plan found in TAP output'
# $expected->[0] = Does not exist
# @got = (
# 'No plan found in TAP output'
# );
# @expected = ();
# Failed test '... and tests_run should equal 4'
# in t/10-regression.t at line 2259.
# got: '0'
# expected: '4'
# Failed test '... and actual_passed should be the correct amount'
# in t/10-regression.t at line 2263.
# got: '0'
# expected: '4'
# Failed test '...... and the correct values'
# in t/10-regression.t at line 2265.
# Structures begin differing at:
# $got->[0] = Does not exist
# $expected->[0] = '1'
# @got = ();
# @expected = (
# 1,
# 2,
# 3,
# 4
# );
# Failed test '... and exit should equal 1'
# in t/10-regression.t at line 2259.
# got: '255'
# expected: '1'
# Failed test '... and passed should be the correct amount'
# in t/10-regression.t at line 2263.
# got: '0'
# expected: '4'
# Failed test '...... and the correct values'
# in t/10-regression.t at line 2265.
# Structures begin differing at:
# $got->[0] = Does not exist
# $expected->[0] = '1'
# @got = ();
# @expected = (
# 1,
# 2,
# 3,
# 4
# );
# Failed test '... and is_good_plan should return a reasonable value'
# in t/10-regression.t at line 2253.
# Failed test '... and plan should equal 1..4'
# in t/10-regression.t at line 2259.
# got: ''
# expected: '1..4'
# Failed test '... and tests_planned should equal 4'
# in t/10-regression.t at line 2259.
# got: undef
# expected: '4'
Can't locate TAPX/Parser/Builder.pm in @INC (@INC contains: lib /home/chris/.cpanplus/5.8.8/build/TAPx-Parser-0.31/blib/lib /home/chris/.cpanplus/5.8.8/build/TAPx-Parser-0.31/blib/arch /home/chris/.cpanplus/5.8.8/build/TAPx-Parser-0.31/blib /usr/lib/perl5/5.8.8/i386-netbsd-thread-multi-64int /usr/lib/perl5/5.8.8/i386-netbsd-thread-multi-64int /usr/lib/perl5/5.8.8 /usr/lib/perl5/site_perl/5.8.8/i386-netbsd-thread-multi-64int /usr/lib/perl5/site_perl/5.8.8/i386-netbsd-thread-multi-64int /usr/lib/perl5/site_perl/5.8.8 /usr/lib/perl5/site_perl/5.8.8/i386-netbsd-thread-multi-64int /usr/lib/perl5/site_perl/5.8.8 /usr/lib/perl5/site_perl . /usr/lib/perl5/5.8.8/i386-netbsd-thread-multi-64int /usr/lib/perl5/5.8.8 /usr/lib/perl5/site_perl/5.8.8/i386-netbsd-thread-multi-64int /usr/lib/perl5/site_perl/5.8.8 /usr/lib/perl5/site_perl .).
BEGIN failed--compilation aborted.
# Looks like your test died before it could output anything.
# Failed test '... and we should have the correct number of results'
# in t/10-regression.t at line 2297.
# Failed test '... and parse_errors should be the correct amount'
# in t/10-regression.t at line 2263.
# got: '1'
# expected: '8'
# Failed test '...... and the correct values'
# in t/10-regression.t at line 2265.
# Structures begin differing at:
# $got->[0] = 'No plan found in TAP output'
# $expected->[0] = 'Tests out of sequence. Found (4) but expected (5)'
# @got = (
# 'No plan found in TAP output'
# );
# @expected = (
# 'Tests out of sequence. Found (4) but expected (5)',
# 'Tests out of sequence. Found (5) but expected (6)',
# 'Tests out of sequence. Found (6) but expected (7)',
# 'Tests out of sequence. Found (7) but expected (8)',
# 'Tests out of sequence. Found (8) but expected (9)',
# 'Tests out of sequence. Found (9) but expected (10)',
# 'Tests out of sequence. Found (10) but expected (11)',
# 'Bad plan. You planned 10 tests but ran 11.'
# );
# Failed test '... and tests_run should equal 11'
# in t/10-regression.t at line 2259.
# got: '0'
# expected: '11'
# Failed test '... and actual_passed should be the correct amount'
# in t/10-regression.t at line 2263.
# got: '0'
# expected: '11'
# Failed test '...... and the correct values'
# in t/10-regression.t at line 2265.
# Structures begin differing at:
# $got->[0] = Does not exist
# $expected->[0] = '1'
# @got = ();
# @expected = (
# 1,
# 2,
# 3,
# 4,
# 4,
# 5,
# 6,
# 7,
# 8,
# 9,
# 10
# );
# Failed test '... and exit should equal 0'
# in t/10-regression.t at line 2259.
# got: '255'
# expected: '0'
# Failed test '... and passed should be the correct amount'
# in t/10-regression.t at line 2263.
# got: '0'
# expected: '11'
# Failed test '...... and the correct values'
# in t/10-regression.t at line 2265.
# Structures begin differing at:
# $got->[0] = Does not exist
# $expected->[0] = '1'
# @got = ();
# @expected = (
# 1,
# 2,
# 3,
# 4,
# 4,
# 5,
# 6,
# 7,
# 8,
# 9,
# 10
# );
# Failed test '... and wait should equal 0'
# in t/10-regression.t at line 2259.
# got: '65280'
# expected: '0'
# Failed test '... and plan should equal 1..10'
# in t/10-regression.t at line 2259.
# got: ''
# expected: '1..10'
# Failed test '... and tests_planned should equal 10'
# in t/10-regression.t at line 2259.
# got: undef
# expected: '10'
Can't locate TAPX/Parser/Builder.pm in @INC (@INC contains: lib /home/chris/.cpanplus/5.8.8/build/TAPx-Parser-0.31/blib/lib /home/chris/.cpanplus/5.8.8/build/TAPx-Parser-0.31/blib/arch /home/chris/.cpanplus/5.8.8/build/TAPx-Parser-0.31/blib /usr/lib/perl5/5.8.8/i386-netbsd-thread-multi-64int /usr/lib/perl5/5.8.8/i386-netbsd-thread-multi-64int /usr/lib/perl5/5.8.8 /usr/lib/perl5/site_perl/5.8.8/i386-netbsd-thread-multi-64int /usr/lib/perl5/site_perl/5.8.8/i386-netbsd-thread-multi-64int /usr/lib/perl5/site_perl/5.8.8 /usr/lib/perl5/site_perl/5.8.8/i386-netbsd-thread-multi-64int /usr/lib/perl5/site_perl/5.8.8 /usr/lib/perl5/site_perl . /usr/lib/perl5/5.8.8/i386-netbsd-thread-multi-64int /usr/lib/perl5/5.8.8 /usr/lib/perl5/site_perl/5.8.8/i386-netbsd-thread-multi-64int /usr/lib/perl5/site_perl/5.8.8 /usr/lib/perl5/site_perl .).
BEGIN failed--compilation aborted.
# Looks like your test died before it could output anything.
# Failed test '... and we should have the correct number of results'
# in t/10-regression.t at line 2297.
# Failed test '... and good_plan should return a reasonable value'
# in t/10-regression.t at line 2253.
# Failed test '... and parse_errors should be the correct amount'
# in t/10-regression.t at line 2263.
# got: '1'
# expected: '0'
# Failed test '...... and the correct values'
# in t/10-regression.t at line 2265.
# Structures begin differing at:
# $got->[0] = 'No plan found in TAP output'
# $expected->[0] = Does not exist
# @got = (
# 'No plan found in TAP output'
# );
# @expected = ();
# Failed test '... and tests_run should equal 4'
# in t/10-regression.t at line 2259.
# got: '0'
# expected: '4'
# Failed test '... and actual_passed should be the correct amount'
# in t/10-regression.t at line 2263.
# got: '0'
# expected: '4'
# Failed test '...... and the correct values'
# in t/10-regression.t at line 2265.
# Structures begin differing at:
# $got->[0] = Does not exist
# $expected->[0] = '1'
# @got = ();
# @expected = (
# 1,
# 2,
# 3,
# 4
# );
# Failed test '... and exit should equal 0'
# in t/10-regression.t at line 2259.
# got: '255'
# expected: '0'
# Failed test '... and passed should be the correct amount'
# in t/10-regression.t at line 2263.
# got: '0'
# expected: '4'
# Failed test '...... and the correct values'
# in t/10-regression.t at line 2265.
# Structures begin differing at:
# $got->[0] = Does not exist
# $expected->[0] = '1'
# @got = ();
# @expected = (
# 1,
# 2,
# 3,
# 4
# );
# Failed test '... and is_good_plan should return a reasonable value'
# in t/10-regression.t at line 2253.
# Failed test '... and wait should equal 0'
# in t/10-regression.t at line 2259.
# got: '65280'
# expected: '0'
# Failed test '... and plan should equal 1..4'
# in t/10-regression.t at line 2259.
# got: ''
# expected: '1..4'
# Failed test '... and tests_planned should equal 4'
# in t/10-regression.t at line 2259.
# got: undef
# expected: '4'
Can't locate TAPX/Parser/Builder.pm in @INC (@INC contains: lib /home/chris/.cpanplus/5.8.8/build/TAPx-Parser-0.31/blib/lib /home/chris/.cpanplus/5.8.8/build/TAPx-Parser-0.31/blib/arch /home/chris/.cpanplus/5.8.8/build/TAPx-Parser-0.31/blib /usr/lib/perl5/5.8.8/i386-netbsd-thread-multi-64int /usr/lib/perl5/5.8.8/i386-netbsd-thread-multi-64int /usr/lib/perl5/5.8.8 /usr/lib/perl5/site_perl/5.8.8/i386-netbsd-thread-multi-64int /usr/lib/perl5/site_perl/5.8.8/i386-netbsd-thread-multi-64int /usr/lib/perl5/site_perl/5.8.8 /usr/lib/perl5/site_perl/5.8.8/i386-netbsd-thread-multi-64int /usr/lib/perl5/site_perl/5.8.8 /usr/lib/perl5/site_perl . /usr/lib/perl5/5.8.8/i386-netbsd-thread-multi-64int /usr/lib/perl5/5.8.8 /usr/lib/perl5/site_perl/5.8.8/i386-netbsd-thread-multi-64int /usr/lib/perl5/site_perl/5.8.8 /usr/lib/perl5/site_perl .).
BEGIN failed--compilation aborted.
# Looks like your test died before it could output anything.
# Failed test '... and we should have the correct number of results'
# in t/10-regression.t at line 2297.
# Failed test '... and good_plan should return a reasonable value'
# in t/10-regression.t at line 2253.
# Failed test '... and parse_errors should be the correct amount'
# in t/10-regression.t at line 2263.
# got: '1'
# expected: '0'
# Failed test '...... and the correct values'
# in t/10-regression.t at line 2265.
# Structures begin differing at:
# $got->[0] = 'No plan found in TAP output'
# $expected->[0] = Does not exist
# @got = (
# 'No plan found in TAP output'
# );
# @expected = ();
# Failed test '... and tests_run should equal 4'
# in t/10-regression.t at line 2259.
# got: '0'
# expected: '4'
# Failed test '... and actual_passed should be the correct amount'
# in t/10-regression.t at line 2263.
# got: '0'
# expected: '3'
# Failed test '...... and the correct values'
# in t/10-regression.t at line 2265.
# Structures begin differing at:
# $got->[0] = Does not exist
# $expected->[0] = '1'
# @got = ();
# @expected = (
# 1,
# 3,
# 4
# );
# Failed test '... and exit should equal 0'
# in t/10-regression.t at line 2259.
# got: '255'
# expected: '0'
# Failed test '... and passed should be the correct amount'
# in t/10-regression.t at line 2263.
# got: '0'
# expected: '3'
# Failed test '...... and the correct values'
# in t/10-regression.t at line 2265.
# Structures begin differing at:
# $got->[0] = Does not exist
# $expected->[0] = '1'
# @got = ();
# @expected = (
# 1,
# 3,
# 4
# );
# Failed test '... and failed should be the correct amount'
# in t/10-regression.t at line 2263.
# got: '0'
# expected: '1'
# Failed test '...... and the correct values'
# in t/10-regression.t at line 2265.
# Structures begin differing at:
# $got->[0] = Does not exist
# $expected->[0] = '2'
# @got = ();
# @expected = (
# 2
# );
# Failed test '... and is_good_plan should return a reasonable value'
# in t/10-regression.t at line 2253.
# Failed test '... and actual_failed should be the correct amount'
# in t/10-regression.t at line 2263.
# got: '0'
# expected: '1'
# Failed test '...... and the correct values'
# in t/10-regression.t at line 2265.
# Structures begin differing at:
# $got->[0] = Does not exist
# $expected->[0] = '2'
# @got = ();
# @expected = (
# 2
# );
# Failed test '... and wait should equal 0'
# in t/10-regression.t at line 2259.
# got: '65280'
# expected: '0'
# Failed test '... and plan should equal 1..4'
# in t/10-regression.t at line 2259.
# got: ''
# expected: '1..4'
# Failed test '... and tests_planned should equal 4'
# in t/10-regression.t at line 2259.
# got: undef
# expected: '4'
Can't locate TAPX/Parser/Builder.pm in @INC (@INC contains: lib we_added_this_lib t/lib /home/chris/.cpanplus/5.8.8/build/TAPx-Parser-0.31/blib/lib /home/chris/.cpanplus/5.8.8/build/TAPx-Parser-0.31/blib/arch /home/chris/.cpanplus/5.8.8/build/TAPx-Parser-0.31/blib /usr/lib/perl5/5.8.8/i386-netbsd-thread-multi-64int /usr/lib/perl5/5.8.8 /usr/lib/perl5/site_perl/5.8.8/i386-netbsd-thread-multi-64int /usr/lib/perl5/site_perl/5.8.8 /usr/lib/perl5/site_perl).
BEGIN failed--compilation aborted.
# Looks like your test died before it could output anything.
# Failed test '... and we should have the correct number of results'
# in t/10-regression.t at line 2297.
# Failed test '... and good_plan should return a reasonable value'
# in t/10-regression.t at line 2253.
# Failed test '... and parse_errors should be the correct amount'
# in t/10-regression.t at line 2263.
# got: '1'
# expected: '0'
# Failed test '...... and the correct values'
# in t/10-regression.t at line 2265.
# Structures begin differing at:
# $got->[0] = 'No plan found in TAP output'
# $expected->[0] = Does not exist
# @got = (
# 'No plan found in TAP output'
# );
# @expected = ();
# Failed test '... and tests_run should return a reasonable value'
# in t/10-regression.t at line 2253.
# Failed test '... and actual_passed should be the correct amount'
# in t/10-regression.t at line 2263.
# got: '0'
# expected: '1'
# Failed test '...... and the correct values'
# in t/10-regression.t at line 2265.
# Structures begin differing at:
# $got->[0] = Does not exist
# $expected->[0] = '1'
# @got = ();
# @expected = (
# 1
# );
# Failed test '... and exit should equal 0'
# in t/10-regression.t at line 2259.
# got: '255'
# expected: '0'
# Failed test '... and passed should be the correct amount'
# in t/10-regression.t at line 2263.
# got: '0'
# expected: '1'
# Failed test '...... and the correct values'
# in t/10-regression.t at line 2265.
# Structures begin differing at:
# $got->[0] = Does not exist
# $expected->[0] = '1'
# @got = ();
# @expected = (
# 1
# );
# Failed test '... and is_good_plan should return a reasonable value'
# in t/10-regression.t at line 2253.
# Failed test '... and wait should equal 0'
# in t/10-regression.t at line 2259.
# got: '65280'
# expected: '0'
# Failed test '... and plan should equal 1..1'
# in t/10-regression.t at line 2259.
# got: ''
# expected: '1..1'
# Failed test '... and tests_planned should equal 1'
# in t/10-regression.t at line 2259.
# got: undef
# expected: '1'
Can't locate TAPX/Parser/Builder.pm in @INC (@INC contains: lib /home/chris/.cpanplus/5.8.8/build/TAPx-Parser-0.31/blib/lib /home/chris/.cpanplus/5.8.8/build/TAPx-Parser-0.31/blib/arch /home/chris/.cpanplus/5.8.8/build/TAPx-Parser-0.31/blib /usr/lib/perl5/5.8.8/i386-netbsd-thread-multi-64int /usr/lib/perl5/5.8.8/i386-netbsd-thread-multi-64int /usr/lib/perl5/5.8.8 /usr/lib/perl5/site_perl/5.8.8/i386-netbsd-thread-multi-64int /usr/lib/perl5/site_perl/5.8.8/i386-netbsd-thread-multi-64int /usr/lib/perl5/site_perl/5.8.8 /usr/lib/perl5/site_perl/5.8.8/i386-netbsd-thread-multi-64int /usr/lib/perl5/site_perl/5.8.8 /usr/lib/perl5/site_perl . /usr/lib/perl5/5.8.8/i386-netbsd-thread-multi-64int /usr/lib/perl5/5.8.8 /usr/lib/perl5/site_perl/5.8.8/i386-netbsd-thread-multi-64int /usr/lib/perl5/site_perl/5.8.8 /usr/lib/perl5/site_perl .).
BEGIN failed--compilation aborted.
# Looks like your test died before it could output anything.
# Failed test '... and we should have the correct number of results'
# in t/10-regression.t at line 2297.
# Failed test '... and good_plan should return a reasonable value'
# in t/10-regression.t at line 2253.
# Failed test '... and parse_errors should be the correct amount'
# in t/10-regression.t at line 2263.
# got: '1'
# expected: '0'
# Failed test '...... and the correct values'
# in t/10-regression.t at line 2265.
# Structures begin differing at:
# $got->[0] = 'No plan found in TAP output'
# $expected->[0] = Does not exist
# @got = (
# 'No plan found in TAP output'
# );
# @expected = ();
# Failed test '... and tests_run should equal 5'
# in t/10-regression.t at line 2259.
# got: '0'
# expected: '5'
# Failed test '... and actual_passed should be the correct amount'
# in t/10-regression.t at line 2263.
# got: '0'
# expected: '4'
# Failed test '...... and the correct values'
# in t/10-regression.t at line 2265.
# Structures begin differing at:
# $got->[0] = Does not exist
# $expected->[0] = '1'
# @got = ();
# @expected = (
# 1,
# 2,
# 4,
# 5
# );
# Failed test '... and exit should equal 0'
# in t/10-regression.t at line 2259.
# got: '255'
# expected: '0'
# Failed test '... and passed should be the correct amount'
# in t/10-regression.t at line 2263.
# got: '0'
# expected: '4'
# Failed test '...... and the correct values'
# in t/10-regression.t at line 2265.
# Structures begin differing at:
# $got->[0] = Does not exist
# $expected->[0] = '1'
# @got = ();
# @expected = (
# 1,
# 2,
# 4,
# 5
# );
# Failed test '... and failed should be the correct amount'
# in t/10-regression.t at line 2263.
# got: '0'
# expected: '1'
# Failed test '...... and the correct values'
# in t/10-regression.t at line 2265.
# Structures begin differing at:
# $got->[0] = Does not exist
# $expected->[0] = '3'
# @got = ();
# @expected = (
# 3
# );
# Failed test '... and is_good_plan should return a reasonable value'
# in t/10-regression.t at line 2253.
# Failed test '... and actual_failed should be the correct amount'
# in t/10-regression.t at line 2263.
# got: '0'
# expected: '1'
# Failed test '...... and the correct values'
# in t/10-regression.t at line 2265.
# Structures begin differing at:
# $got->[0] = Does not exist
# $expected->[0] = '3'
# @got = ();
# @expected = (
# 3
# );
# Failed test '... and wait should equal 0'
# in t/10-regression.t at line 2259.
# got: '65280'
# expected: '0'
# Failed test '... and plan should equal 1..5'
# in t/10-regression.t at line 2259.
# got: ''
# expected: '1..5'
# Failed test '... and tests_planned should equal 5'
# in t/10-regression.t at line 2259.
# got: undef
# expected: '5'
Can't locate TAPX/Parser/Builder.pm in @INC (@INC contains: lib /home/chris/.cpanplus/5.8.8/build/TAPx-Parser-0.31/blib/lib /home/chris/.cpanplus/5.8.8/build/TAPx-Parser-0.31/blib/arch /home/chris/.cpanplus/5.8.8/build/TAPx-Parser-0.31/blib /usr/lib/perl5/5.8.8/i386-netbsd-thread-multi-64int /usr/lib/perl5/5.8.8/i386-netbsd-thread-multi-64int /usr/lib/perl5/5.8.8 /usr/lib/perl5/site_perl/5.8.8/i386-netbsd-thread-multi-64int /usr/lib/perl5/site_perl/5.8.8/i386-netbsd-thread-multi-64int /usr/lib/perl5/site_perl/5.8.8 /usr/lib/perl5/site_perl/5.8.8/i386-netbsd-thread-multi-64int /usr/lib/perl5/site_perl/5.8.8 /usr/lib/perl5/site_perl . /usr/lib/perl5/5.8.8/i386-netbsd-thread-multi-64int /usr/lib/perl5/5.8.8 /usr/lib/perl5/site_perl/5.8.8/i386-netbsd-thread-multi-64int /usr/lib/perl5/site_perl/5.8.8 /usr/lib/perl5/site_perl .).
BEGIN failed--compilation aborted.
# Looks like your test died before it could output anything.
# Failed test '... and exit should equal 0'
# in t/10-regression.t at line 2259.
# got: '255'
# expected: '0'
# Failed test '... and wait should equal 0'
# in t/10-regression.t at line 2259.
# got: '65280'
# expected: '0'
Can't locate TAPX/Parser/Builder.pm in @INC (@INC contains: lib /home/chris/.cpanplus/5.8.8/build/TAPx-Parser-0.31/blib/lib /home/chris/.cpanplus/5.8.8/build/TAPx-Parser-0.31/blib/arch /home/chris/.cpanplus/5.8.8/build/TAPx-Parser-0.31/blib /usr/lib/perl5/5.8.8/i386-netbsd-thread-multi-64int /usr/lib/perl5/5.8.8/i386-netbsd-thread-multi-64int /usr/lib/perl5/5.8.8 /usr/lib/perl5/site_perl/5.8.8/i386-netbsd-thread-multi-64int /usr/lib/perl5/site_perl/5.8.8/i386-netbsd-thread-multi-64int /usr/lib/perl5/site_perl/5.8.8 /usr/lib/perl5/site_perl/5.8.8/i386-netbsd-thread-multi-64int /usr/lib/perl5/site_perl/5.8.8 /usr/lib/perl5/site_perl . /usr/lib/perl5/5.8.8/i386-netbsd-thread-multi-64int /usr/lib/perl5/5.8.8 /usr/lib/perl5/site_perl/5.8.8/i386-netbsd-thread-multi-64int /usr/lib/perl5/site_perl/5.8.8 /usr/lib/perl5/site_perl .).
BEGIN failed--compilation aborted.
# Looks like your test died before it could output anything.
# Failed test '... and we should have the correct number of results'
# in t/10-regression.t at line 2297.
# Failed test '... and parse_errors should be the correct amount'
# in t/10-regression.t at line 2263.
# got: '1'
# expected: '14'
# Failed test '...... and the correct values'
# in t/10-regression.t at line 2265.
# Structures begin differing at:
# $got->[0] = 'No plan found in TAP output'
# $expected->[0] = 'Tests out of sequence. Found (2) but expected (1)'
# @got = (
# 'No plan found in TAP output'
# );
# @expected = (
# 'Tests out of sequence. Found (2) but expected (1)',
# 'Tests out of sequence. Found (3) but expected (2)',
# 'Tests out of sequence. Found (4) but expected (3)',
# 'Tests out of sequence. Found (6) but expected (4)',
# 'Tests out of sequence. Found (8) but expected (5)',
# 'Tests out of sequence. Found (9) but expected (6)',
# 'Tests out of sequence. Found (10) but expected (7)',
# 'Tests out of sequence. Found (11) but expected (8)',
# 'Tests out of sequence. Found (12) but expected (9)',
# 'Tests out of sequence. Found (13) but expected (10)',
# 'Plan (1..15) must be at the beginning or end of the TAP output',
# 'Tests out of sequence. Found (1) but expected (11)',
# 'Tests out of sequence. Found (5) but expected (12)',
# 'Tests out of sequence. Found (7) but expected (13)'
# );
# Failed test '... and tests_run should equal 15'
# in t/10-regression.t at line 2259.
# got: '0'
# expected: '15'
# Failed test '... and actual_passed should be the correct amount'
# in t/10-regression.t at line 2263.
# got: '0'
# expected: '15'
# Failed test '...... and the correct values'
# in t/10-regression.t at line 2265.
# Structures begin differing at:
# $got->[0] = Does not exist
# $expected->[0] = '2'
# @got = ();
# @expected = (
# 2,
# 3,
# 4,
# 6,
# 8,
# 9,
# 10,
# 11,
# 12,
# 13,
# 1,
# 5,
# 7,
# 14,
# 15
# );
# Failed test '... and exit should equal 0'
# in t/10-regression.t at line 2259.
# got: '255'
# expected: '0'
# Failed test '... and passed should be the correct amount'
# in t/10-regression.t at line 2263.
# got: '0'
# expected: '15'
# Failed test '...... and the correct values'
# in t/10-regression.t at line 2265.
# Structures begin differing at:
# $got->[0] = Does not exist
# $expected->[0] = '2'
# @got = ();
# @expected = (
# 2,
# 3,
# 4,
# 6,
# 8,
# 9,
# 10,
# 11,
# 12,
# 13,
# 1,
# 5,
# 7,
# 14,
# 15
# );
# Failed test '... and wait should equal 0'
# in t/10-regression.t at line 2259.
# got: '65280'
# expected: '0'
# Failed test '... and plan should equal 1..15'
# in t/10-regression.t at line 2259.
# got: ''
# expected: '1..15'
# Failed test '... and tests_planned should equal 15'
# in t/10-regression.t at line 2259.
# got: undef
# expected: '15'
Can't locate TAPX/Parser/Builder.pm in @INC (@INC contains: lib /home/chris/.cpanplus/5.8.8/build/TAPx-Parser-0.31/blib/lib /home/chris/.cpanplus/5.8.8/build/TAPx-Parser-0.31/blib/arch /home/chris/.cpanplus/5.8.8/build/TAPx-Parser-0.31/blib /usr/lib/perl5/5.8.8/i386-netbsd-thread-multi-64int /usr/lib/perl5/5.8.8/i386-netbsd-thread-multi-64int /usr/lib/perl5/5.8.8 /usr/lib/perl5/site_perl/5.8.8/i386-netbsd-thread-multi-64int /usr/lib/perl5/site_perl/5.8.8/i386-netbsd-thread-multi-64int /usr/lib/perl5/site_perl/5.8.8 /usr/lib/perl5/site_perl/5.8.8/i386-netbsd-thread-multi-64int /usr/lib/perl5/site_perl/5.8.8 /usr/lib/perl5/site_perl . /usr/lib/perl5/5.8.8/i386-netbsd-thread-multi-64int /usr/lib/perl5/5.8.8 /usr/lib/perl5/site_perl/5.8.8/i386-netbsd-thread-multi-64int /usr/lib/perl5/site_perl/5.8.8 /usr/lib/perl5/site_perl .).
BEGIN failed--compilation aborted.
# Looks like your test died before it could output anything.
# Failed test '... and we should have the correct number of results'
# in t/10-regression.t at line 2297.
# Failed test '... and good_plan should return a reasonable value'
# in t/10-regression.t at line 2253.
# Failed test '... and parse_errors should be the correct amount'
# in t/10-regression.t at line 2263.
# got: '1'
# expected: '0'
# Failed test '...... and the correct values'
# in t/10-regression.t at line 2265.
# Structures begin differing at:
# $got->[0] = 'No plan found in TAP output'
# $expected->[0] = Does not exist
# @got = (
# 'No plan found in TAP output'
# );
# @expected = ();
# Failed test '... and tests_run should equal 1'
# in t/10-regression.t at line 2259.
# got: '0'
# expected: '1'
# Failed test '... and actual_passed should be the correct amount'
# in t/10-regression.t at line 2263.
# got: '0'
# expected: '1'
# Failed test '...... and the correct values'
# in t/10-regression.t at line 2265.
# Structures begin differing at:
# $got->[0] = Does not exist
# $expected->[0] = '1'
# @got = ();
# @expected = (
# 1
# );
# Failed test '... and exit should equal 0'
# in t/10-regression.t at line 2259.
# got: '255'
# expected: '0'
# Failed test '... and passed should be the correct amount'
# in t/10-regression.t at line 2263.
# got: '0'
# expected: '1'
# Failed test '...... and the correct values'
# in t/10-regression.t at line 2265.
# Structures begin differing at:
# $got->[0] = Does not exist
# $expected->[0] = '1'
# @got = ();
# @expected = (
# 1
# );
# Failed test '... and plan should equal 1..1'
# in t/10-regression.t at line 2259.
# got: ''
# expected: '1..1'
# Failed test '... and tests_planned should equal 1'
# in t/10-regression.t at line 2259.
# got: undef
# expected: '1'
Can't locate TAPX/Parser/Builder.pm in @INC (@INC contains: lib /home/chris/.cpanplus/5.8.8/build/TAPx-Parser-0.31/blib/lib /home/chris/.cpanplus/5.8.8/build/TAPx-Parser-0.31/blib/arch /home/chris/.cpanplus/5.8.8/build/TAPx-Parser-0.31/blib /usr/lib/perl5/5.8.8/i386-netbsd-thread-multi-64int /usr/lib/perl5/5.8.8/i386-netbsd-thread-multi-64int /usr/lib/perl5/5.8.8 /usr/lib/perl5/site_perl/5.8.8/i386-netbsd-thread-multi-64int /usr/lib/perl5/site_perl/5.8.8/i386-netbsd-thread-multi-64int /usr/lib/perl5/site_perl/5.8.8 /usr/lib/perl5/site_perl/5.8.8/i386-netbsd-thread-multi-64int /usr/lib/perl5/site_perl/5.8.8 /usr/lib/perl5/site_perl . /usr/lib/perl5/5.8.8/i386-netbsd-thread-multi-64int /usr/lib/perl5/5.8.8 /usr/lib/perl5/site_perl/5.8.8/i386-netbsd-thread-multi-64int /usr/lib/perl5/site_perl/5.8.8 /usr/lib/perl5/site_perl .).
BEGIN failed--compilation aborted.
# Looks like your test died before it could output anything.
# Failed test '... and we should have the correct number of results'
# in t/10-regression.t at line 2297.
# Failed test '... and good_plan should return a reasonable value'
# in t/10-regression.t at line 2253.
# Failed test '... and parse_errors should be the correct amount'
# in t/10-regression.t at line 2263.
# got: '1'
# expected: '0'
# Failed test '...... and the correct values'
# in t/10-regression.t at line 2265.
# Structures begin differing at:
# $got->[0] = 'No plan found in TAP output'
# $expected->[0] = Does not exist
# @got = (
# 'No plan found in TAP output'
# );
# @expected = ();
# Failed test '... and tests_run should equal 5'
# in t/10-regression.t at line 2259.
# got: '0'
# expected: '5'
# Failed test '... and actual_passed should be the correct amount'
# in t/10-regression.t at line 2263.
# got: '0'
# expected: '5'
# Failed test '...... and the correct values'
# in t/10-regression.t at line 2265.
# Structures begin differing at:
# $got->[0] = Does not exist
# $expected->[0] = '1'
# @got = ();
# @expected = (
# 1,
# 2,
# 3,
# 4,
# 5
# );
# Failed test '... and exit should equal 0'
# in t/10-regression.t at line 2259.
# got: '255'
# expected: '0'
# Failed test '... and passed should be the correct amount'
# in t/10-regression.t at line 2263.
# got: '0'
# expected: '5'
# Failed test '...... and the correct values'
# in t/10-regression.t at line 2265.
# Structures begin differing at:
# $got->[0] = Does not exist
# $expected->[0] = '1'
# @got = ();
# @expected = (
# 1,
# 2,
# 3,
# 4,
# 5
# );
# Failed test '... and is_good_plan should return a reasonable value'
# in t/10-regression.t at line 2253.
# Failed test '... and wait should equal 0'
# in t/10-regression.t at line 2259.
# got: '65280'
# expected: '0'
# Failed test '... and plan should equal 1..5'
# in t/10-regression.t at line 2259.
# got: ''
# expected: '1..5'
# Failed test '... and tests_planned should equal 5'
# in t/10-regression.t at line 2259.
# got: undef
# expected: '5'
Can't locate TAPX/Parser/Builder.pm in @INC (@INC contains: lib /home/chris/.cpanplus/5.8.8/build/TAPx-Parser-0.31/blib/lib /home/chris/.cpanplus/5.8.8/build/TAPx-Parser-0.31/blib/arch /home/chris/.cpanplus/5.8.8/build/TAPx-Parser-0.31/blib /usr/lib/perl5/5.8.8/i386-netbsd-thread-multi-64int /usr/lib/perl5/5.8.8/i386-netbsd-thread-multi-64int /usr/lib/perl5/5.8.8 /usr/lib/perl5/site_perl/5.8.8/i386-netbsd-thread-multi-64int /usr/lib/perl5/site_perl/5.8.8/i386-netbsd-thread-multi-64int /usr/lib/perl5/site_perl/5.8.8 /usr/lib/perl5/site_perl/5.8.8/i386-netbsd-thread-multi-64int /usr/lib/perl5/site_perl/5.8.8 /usr/lib/perl5/site_perl . /usr/lib/perl5/5.8.8/i386-netbsd-thread-multi-64int /usr/lib/perl5/5.8.8 /usr/lib/perl5/site_perl/5.8.8/i386-netbsd-thread-multi-64int /usr/lib/perl5/site_perl/5.8.8 /usr/lib/perl5/site_perl .).
BEGIN failed--compilation aborted.
# Looks like your test died before it could output anything.
# Failed test '... and we should have the correct number of results'
# in t/10-regression.t at line 2297.
# Failed test '... and good_plan should return a reasonable value'
# in t/10-regression.t at line 2253.
# Failed test '... and parse_errors should be the correct amount'
# in t/10-regression.t at line 2263.
# got: '1'
# expected: '0'
# Failed test '...... and the correct values'
# in t/10-regression.t at line 2265.
# Structures begin differing at:
# $got->[0] = 'No plan found in TAP output'
# $expected->[0] = Does not exist
# @got = (
# 'No plan found in TAP output'
# );
# @expected = ();
# Failed test '... and tests_run should equal 2'
# in t/10-regression.t at line 2259.
# got: '0'
# expected: '2'
# Failed test '... and actual_passed should be the correct amount'
# in t/10-regression.t at line 2263.
# got: '0'
# expected: '2'
# Failed test '...... and the correct values'
# in t/10-regression.t at line 2265.
# Structures begin differing at:
# $got->[0] = Does not exist
# $expected->[0] = '1'
# @got = ();
# @expected = (
# 1,
# 2
# );
# Failed test '... and exit should equal 0'
# in t/10-regression.t at line 2259.
# got: '255'
# expected: '0'
# Failed test '... and passed should be the correct amount'
# in t/10-regression.t at line 2263.
# got: '0'
# expected: '2'
# Failed test '...... and the correct values'
# in t/10-regression.t at line 2265.
# Structures begin differing at:
# $got->[0] = Does not exist
# $expected->[0] = '1'
# @got = ();
# @expected = (
# 1,
# 2
# );
# Failed test '... and is_good_plan should return a reasonable value'
# in t/10-regression.t at line 2253.
# Failed test '... and wait should equal 0'
# in t/10-regression.t at line 2259.
# got: '65280'
# expected: '0'
# Failed test '... and plan should equal 1..2'
# in t/10-regression.t at line 2259.
# got: ''
# expected: '1..2'
# Failed test '... and tests_planned should equal 2'
# in t/10-regression.t at line 2259.
# got: undef
# expected: '2'
Can't locate TAPX/Parser/Builder.pm in @INC (@INC contains: lib /home/chris/.cpanplus/5.8.8/build/TAPx-Parser-0.31/blib/lib /home/chris/.cpanplus/5.8.8/build/TAPx-Parser-0.31/blib/arch /home/chris/.cpanplus/5.8.8/build/TAPx-Parser-0.31/blib /usr/lib/perl5/5.8.8/i386-netbsd-thread-multi-64int /usr/lib/perl5/5.8.8/i386-netbsd-thread-multi-64int /usr/lib/perl5/5.8.8 /usr/lib/perl5/site_perl/5.8.8/i386-netbsd-thread-multi-64int /usr/lib/perl5/site_perl/5.8.8/i386-netbsd-thread-multi-64int /usr/lib/perl5/site_perl/5.8.8 /usr/lib/perl5/site_perl/5.8.8/i386-netbsd-thread-multi-64int /usr/lib/perl5/site_perl/5.8.8 /usr/lib/perl5/site_perl . /usr/lib/perl5/5.8.8/i386-netbsd-thread-multi-64int /usr/lib/perl5/5.8.8 /usr/lib/perl5/site_perl/5.8.8/i386-netbsd-thread-multi-64int /usr/lib/perl5/site_perl/5.8.8 /usr/lib/perl5/site_perl .).
BEGIN failed--compilation aborted.
# Looks like your test died before it could output anything.
# Failed test '... and we should have the correct number of results'
# in t/10-regression.t at line 2297.
# Failed test '... and good_plan should return a reasonable value'
# in t/10-regression.t at line 2253.
# Failed test '... and parse_errors should be the correct amount'
# in t/10-regression.t at line 2263.
# got: '1'
# expected: '0'
# Failed test '...... and the correct values'
# in t/10-regression.t at line 2265.
# Structures begin differing at:
# $got->[0] = 'No plan found in TAP output'
# $expected->[0] = Does not exist
# @got = (
# 'No plan found in TAP output'
# );
# @expected = ();
# Failed test '... and tests_run should equal 5'
# in t/10-regression.t at line 2259.
# got: '0'
# expected: '5'
# Failed test '... and actual_passed should be the correct amount'
# in t/10-regression.t at line 2263.
# got: '0'
# expected: '5'
# Failed test '...... and the correct values'
# in t/10-regression.t at line 2265.
# Structures begin differing at:
# $got->[0] = Does not exist
# $expected->[0] = '1'
# @got = ();
# @expected = (
# 1,
# 2,
# 3,
# 4,
# 5
# );
# Failed test '... and exit should equal 0'
# in t/10-regression.t at line 2259.
# got: '255'
# expected: '0'
# Failed test '... and passed should be the correct amount'
# in t/10-regression.t at line 2263.
# got: '0'
# expected: '5'
# Failed test '...... and the correct values'
# in t/10-regression.t at line 2265.
# Structures begin differing at:
# $got->[0] = Does not exist
# $expected->[0] = '1'
# @got = ();
# @expected = (
# 1,
# 2,
# 3,
# 4,
# 5
# );
# Failed test '... and is_good_plan should return a reasonable value'
# in t/10-regression.t at line 2253.
# Failed test '... and wait should equal 0'
# in t/10-regression.t at line 2259.
# got: '65280'
# expected: '0'
# Failed test '... and plan should equal 1..5'
# in t/10-regression.t at line 2259.
# got: ''
# expected: '1..5'
# Failed test '... and tests_planned should equal 5'
# in t/10-regression.t at line 2259.
# got: undef
# expected: '5'
Can't locate TAPX/Parser/Builder.pm in @INC (@INC contains: lib /home/chris/.cpanplus/5.8.8/build/TAPx-Parser-0.31/blib/lib /home/chris/.cpanplus/5.8.8/build/TAPx-Parser-0.31/blib/arch /home/chris/.cpanplus/5.8.8/build/TAPx-Parser-0.31/blib /usr/lib/perl5/5.8.8/i386-netbsd-thread-multi-64int /usr/lib/perl5/5.8.8/i386-netbsd-thread-multi-64int /usr/lib/perl5/5.8.8 /usr/lib/perl5/site_perl/5.8.8/i386-netbsd-thread-multi-64int /usr/lib/perl5/site_perl/5.8.8/i386-netbsd-thread-multi-64int /usr/lib/perl5/site_perl/5.8.8 /usr/lib/perl5/site_perl/5.8.8/i386-netbsd-thread-multi-64int /usr/lib/perl5/site_perl/5.8.8 /usr/lib/perl5/site_perl . /usr/lib/perl5/5.8.8/i386-netbsd-thread-multi-64int /usr/lib/perl5/5.8.8 /usr/lib/perl5/site_perl/5.8.8/i386-netbsd-thread-multi-64int /usr/lib/perl5/site_perl/5.8.8 /usr/lib/perl5/site_perl .).
BEGIN failed--compilation aborted.
# Looks like your test died before it could output anything.
# Failed test '... and we should have the correct number of results'
# in t/10-regression.t at line 2297.
# Failed test '... and good_plan should return a reasonable value'
# in t/10-regression.t at line 2253.
# Failed test '... and parse_errors should be the correct amount'
# in t/10-regression.t at line 2263.
# got: '1'
# expected: '0'
# Failed test '...... and the correct values'
# in t/10-regression.t at line 2265.
# Structures begin differing at:
# $got->[0] = 'No plan found in TAP output'
# $expected->[0] = Does not exist
# @got = (
# 'No plan found in TAP output'
# );
# @expected = ();
# Failed test '... and tests_run should equal 5'
# in t/10-regression.t at line 2259.
# got: '0'
# expected: '5'
# Failed test '... and actual_passed should be the correct amount'
# in t/10-regression.t at line 2263.
# got: '0'
# expected: '3'
# Failed test '...... and the correct values'
# in t/10-regression.t at line 2265.
# Structures begin differing at:
# $got->[0] = Does not exist
# $expected->[0] = '1'
# @got = ();
# @expected = (
# 1,
# 3,
# 4
# );
# Failed test '... and exit should equal 0'
# in t/10-regression.t at line 2259.
# got: '255'
# expected: '0'
# Failed test '... and passed should be the correct amount'
# in t/10-regression.t at line 2263.
# got: '0'
# expected: '3'
# Failed test '...... and the correct values'
# in t/10-regression.t at line 2265.
# Structures begin differing at:
# $got->[0] = Does not exist
# $expected->[0] = '1'
# @got = ();
# @expected = (
# 1,
# 3,
# 4
# );
# Failed test '... and failed should be the correct amount'
# in t/10-regression.t at line 2263.
# got: '0'
# expected: '2'
# Failed test '...... and the correct values'
# in t/10-regression.t at line 2265.
# Structures begin differing at:
# $got->[0] = Does not exist
# $expected->[0] = '2'
# @got = ();
# @expected = (
# 2,
# 5
# );
# Failed test '... and is_good_plan should return a reasonable value'
# in t/10-regression.t at line 2253.
# Failed test '... and actual_failed should be the correct amount'
# in t/10-regression.t at line 2263.
# got: '0'
# expected: '2'
# Failed test '...... and the correct values'
# in t/10-regression.t at line 2265.
# Structures begin differing at:
# $got->[0] = Does not exist
# $expected->[0] = '2'
# @got = ();
# @expected = (
# 2,
# 5
# );
# Failed test '... and wait should equal 0'
# in t/10-regression.t at line 2259.
# got: '65280'
# expected: '0'
# Failed test '... and plan should equal 1..5'
# in t/10-regression.t at line 2259.
# got: ''
# expected: '1..5'
# Failed test '... and tests_planned should equal 5'
# in t/10-regression.t at line 2259.
# got: undef
# expected: '5'
Can't locate TAPX/Parser/Builder.pm in @INC (@INC contains: lib /home/chris/.cpanplus/5.8.8/build/TAPx-Parser-0.31/blib/lib /home/chris/.cpanplus/5.8.8/build/TAPx-Parser-0.31/blib/arch /home/chris/.cpanplus/5.8.8/build/TAPx-Parser-0.31/blib /usr/lib/perl5/5.8.8/i386-netbsd-thread-multi-64int /usr/lib/perl5/5.8.8/i386-netbsd-thread-multi-64int /usr/lib/perl5/5.8.8 /usr/lib/perl5/site_perl/5.8.8/i386-netbsd-thread-multi-64int /usr/lib/perl5/site_perl/5.8.8/i386-netbsd-thread-multi-64int /usr/lib/perl5/site_perl/5.8.8 /usr/lib/perl5/site_perl/5.8.8/i386-netbsd-thread-multi-64int /usr/lib/perl5/site_perl/5.8.8 /usr/lib/perl5/site_perl . /usr/lib/perl5/5.8.8/i386-netbsd-thread-multi-64int /usr/lib/perl5/5.8.8 /usr/lib/perl5/site_perl/5.8.8/i386-netbsd-thread-multi-64int /usr/lib/perl5/site_perl/5.8.8 /usr/lib/perl5/site_perl .).
BEGIN failed--compilation aborted.
# Looks like your test died before it could output anything.
# Failed test '... and we should have the correct number of results'
# in t/10-regression.t at line 2297.
# Failed test '... and good_plan should return a reasonable value'
# in t/10-regression.t at line 2253.
# Failed test '... and parse_errors should be the correct amount'
# in t/10-regression.t at line 2263.
# got: '1'
# expected: '0'
# Failed test '...... and the correct values'
# in t/10-regression.t at line 2265.
# Structures begin differing at:
# $got->[0] = 'No plan found in TAP output'
# $expected->[0] = Does not exist
# @got = (
# 'No plan found in TAP output'
# );
# @expected = ();
# Failed test '... and tests_run should equal 5'
# in t/10-regression.t at line 2259.
# got: '0'
# expected: '5'
# Failed test '... and actual_passed should be the correct amount'
# in t/10-regression.t at line 2263.
# got: '0'
# expected: '5'
# Failed test '...... and the correct values'
# in t/10-regression.t at line 2265.
# Structures begin differing at:
# $got->[0] = Does not exist
# $expected->[0] = '1'
# @got = ();
# @expected = (
# 1,
# 2,
# 3,
# 4,
# 5
# );
# Failed test '... and exit should equal 0'
# in t/10-regression.t at line 2259.
# got: '255'
# expected: '0'
# Failed test '... and passed should be the correct amount'
# in t/10-regression.t at line 2263.
# got: '0'
# expected: '5'
# Failed test '...... and the correct values'
# in t/10-regression.t at line 2265.
# Structures begin differing at:
# $got->[0] = Does not exist
# $expected->[0] = '1'
# @got = ();
# @expected = (
# 1,
# 2,
# 3,
# 4,
# 5
# );
# Failed test '... and skipped should be the correct amount'
# in t/10-regression.t at line 2263.
# got: '0'
# expected: '1'
# Failed test '...... and the correct values'
# in t/10-regression.t at line 2265.
# Structures begin differing at:
# $got->[0] = Does not exist
# $expected->[0] = '2'
# @got = ();
# @expected = (
# 2
# );
# Failed test '... and is_good_plan should return a reasonable value'
# in t/10-regression.t at line 2253.
# Failed test '... and wait should equal 0'
# in t/10-regression.t at line 2259.
# got: '65280'
# expected: '0'
# Failed test '... and plan should equal 1..5'
# in t/10-regression.t at line 2259.
# got: ''
# expected: '1..5'
# Failed test '... and tests_planned should equal 5'
# in t/10-regression.t at line 2259.
# got: undef
# expected: '5'
Can't locate TAPX/Parser/Builder.pm in @INC (@INC contains: lib /home/chris/.cpanplus/5.8.8/build/TAPx-Parser-0.31/blib/lib /home/chris/.cpanplus/5.8.8/build/TAPx-Parser-0.31/blib/arch /home/chris/.cpanplus/5.8.8/build/TAPx-Parser-0.31/blib /usr/lib/perl5/5.8.8/i386-netbsd-thread-multi-64int /usr/lib/perl5/5.8.8/i386-netbsd-thread-multi-64int /usr/lib/perl5/5.8.8 /usr/lib/perl5/site_perl/5.8.8/i386-netbsd-thread-multi-64int /usr/lib/perl5/site_perl/5.8.8/i386-netbsd-thread-multi-64int /usr/lib/perl5/site_perl/5.8.8 /usr/lib/perl5/site_perl/5.8.8/i386-netbsd-thread-multi-64int /usr/lib/perl5/site_perl/5.8.8 /usr/lib/perl5/site_perl . /usr/lib/perl5/5.8.8/i386-netbsd-thread-multi-64int /usr/lib/perl5/5.8.8 /usr/lib/perl5/site_perl/5.8.8/i386-netbsd-thread-multi-64int /usr/lib/perl5/site_perl/5.8.8 /usr/lib/perl5/site_perl .).
BEGIN failed--compilation aborted.
# Looks like your test died before it could output anything.
# Failed test '... and we should have the correct number of results'
# in t/10-regression.t at line 2297.
# Failed test '... and good_plan should return a reasonable value'
# in t/10-regression.t at line 2253.
# Failed test '... and parse_errors should be the correct amount'
# in t/10-regression.t at line 2263.
# got: '1'
# expected: '0'
# Failed test '...... and the correct values'
# in t/10-regression.t at line 2265.
# Structures begin differing at:
# $got->[0] = 'No plan found in TAP output'
# $expected->[0] = Does not exist
# @got = (
# 'No plan found in TAP output'
# );
# @expected = ();
# Failed test '... and tests_run should return a reasonable value'
# in t/10-regression.t at line 2253.
# Failed test '... and actual_passed should be the correct amount'
# in t/10-regression.t at line 2263.
# got: '0'
# expected: '1'
# Failed test '...... and the correct values'
# in t/10-regression.t at line 2265.
# Structures begin differing at:
# $got->[0] = Does not exist
# $expected->[0] = '1'
# @got = ();
# @expected = (
# 1
# );
# Failed test '... and exit should equal 0'
# in t/10-regression.t at line 2259.
# got: '255'
# expected: '0'
# Failed test '... and passed should be the correct amount'
# in t/10-regression.t at line 2263.
# got: '0'
# expected: '1'
# Failed test '...... and the correct values'
# in t/10-regression.t at line 2265.
# Structures begin differing at:
# $got->[0] = Does not exist
# $expected->[0] = '1'
# @got = ();
# @expected = (
# 1
# );
# Failed test '... and skipped should be the correct amount'
# in t/10-regression.t at line 2263.
# got: '0'
# expected: '1'
# Failed test '...... and the correct values'
# in t/10-regression.t at line 2265.
# Structures begin differing at:
# $got->[0] = Does not exist
# $expected->[0] = '1'
# @got = ();
# @expected = (
# 1
# );
# Failed test '... and is_good_plan should return a reasonable value'
# in t/10-regression.t at line 2253.
# Failed test '... and wait should equal 0'
# in t/10-regression.t at line 2259.
# got: '65280'
# expected: '0'
# Failed test '... and plan should equal 1..1'
# in t/10-regression.t at line 2259.
# got: ''
# expected: '1..1'
# Failed test '... and tests_planned should equal 1'
# in t/10-regression.t at line 2259.
# got: undef
# expected: '1'
Can't locate TAPX/Parser/Builder.pm in @INC (@INC contains: lib /home/chris/.cpanplus/5.8.8/build/TAPx-Parser-0.31/blib/lib /home/chris/.cpanplus/5.8.8/build/TAPx-Parser-0.31/blib/arch /home/chris/.cpanplus/5.8.8/build/TAPx-Parser-0.31/blib /usr/lib/perl5/5.8.8/i386-netbsd-thread-multi-64int /usr/lib/perl5/5.8.8/i386-netbsd-thread-multi-64int /usr/lib/perl5/5.8.8 /usr/lib/perl5/site_perl/5.8.8/i386-netbsd-thread-multi-64int /usr/lib/perl5/site_perl/5.8.8/i386-netbsd-thread-multi-64int /usr/lib/perl5/site_perl/5.8.8 /usr/lib/perl5/site_perl/5.8.8/i386-netbsd-thread-multi-64int /usr/lib/perl5/site_perl/5.8.8 /usr/lib/perl5/site_perl . /usr/lib/perl5/5.8.8/i386-netbsd-thread-multi-64int /usr/lib/perl5/5.8.8 /usr/lib/perl5/site_perl/5.8.8/i386-netbsd-thread-multi-64int /usr/lib/perl5/site_perl/5.8.8 /usr/lib/perl5/site_perl .).
BEGIN failed--compilation aborted.
# Looks like your test died before it could output anything.
# Failed test '... and we should have the correct number of results'
# in t/10-regression.t at line 2297.
# Failed test '... and good_plan should return a reasonable value'
# in t/10-regression.t at line 2253.
# Failed test '... and parse_errors should be the correct amount'
# in t/10-regression.t at line 2263.
# got: '1'
# expected: '0'
# Failed test '...... and the correct values'
# in t/10-regression.t at line 2265.
# Structures begin differing at:
# $got->[0] = 'No plan found in TAP output'
# $expected->[0] = Does not exist
# @got = (
# 'No plan found in TAP output'
# );
# @expected = ();
# Failed test '... and exit should equal 0'
# in t/10-regression.t at line 2259.
# got: '255'
# expected: '0'
# Failed test '... and is_good_plan should return a reasonable value'
# in t/10-regression.t at line 2253.
# Failed test '... and wait should equal 0'
# in t/10-regression.t at line 2259.
# got: '65280'
# expected: '0'
# Failed test '... and plan should equal 1..0'
# in t/10-regression.t at line 2259.
# got: ''
# expected: '1..0'
# Failed test '... and tests_planned should equal 0'
# in t/10-regression.t at line 2259.
# got: undef
# expected: '0'
Can't locate TAPX/Parser/Builder.pm in @INC (@INC contains: lib /home/chris/.cpanplus/5.8.8/build/TAPx-Parser-0.31/blib/lib /home/chris/.cpanplus/5.8.8/build/TAPx-Parser-0.31/blib/arch /home/chris/.cpanplus/5.8.8/build/TAPx-Parser-0.31/blib /usr/lib/perl5/5.8.8/i386-netbsd-thread-multi-64int /usr/lib/perl5/5.8.8/i386-netbsd-thread-multi-64int /usr/lib/perl5/5.8.8 /usr/lib/perl5/site_perl/5.8.8/i386-netbsd-thread-multi-64int /usr/lib/perl5/site_perl/5.8.8/i386-netbsd-thread-multi-64int /usr/lib/perl5/site_perl/5.8.8 /usr/lib/perl5/site_perl/5.8.8/i386-netbsd-thread-multi-64int /usr/lib/perl5/site_perl/5.8.8 /usr/lib/perl5/site_perl . /usr/lib/perl5/5.8.8/i386-netbsd-thread-multi-64int /usr/lib/perl5/5.8.8 /usr/lib/perl5/site_perl/5.8.8/i386-netbsd-thread-multi-64int /usr/lib/perl5/site_perl/5.8.8 /usr/lib/perl5/site_perl .).
BEGIN failed--compilation aborted.
# Looks like your test died before it could output anything.
# Failed test '... and we should have the correct number of results'
# in t/10-regression.t at line 2297.
# Failed test '... and good_plan should return a reasonable value'
# in t/10-regression.t at line 2253.
# Failed test '... and parse_errors should be the correct amount'
# in t/10-regression.t at line 2263.
# got: '1'
# expected: '0'
# Failed test '...... and the correct values'
# in t/10-regression.t at line 2265.
# Structures begin differing at:
# $got->[0] = 'No plan found in TAP output'
# $expected->[0] = Does not exist
# @got = (
# 'No plan found in TAP output'
# );
# @expected = ();
# Failed test '... and exit should equal 0'
# in t/10-regression.t at line 2259.
# got: '255'
# expected: '0'
# Failed test '... and is_good_plan should return a reasonable value'
# in t/10-regression.t at line 2253.
# Failed test '... and wait should equal 0'
# in t/10-regression.t at line 2259.
# got: '65280'
# expected: '0'
# Failed test '... and plan should equal 1..0'
# in t/10-regression.t at line 2259.
# got: ''
# expected: '1..0'
# Failed test '... and tests_planned should equal 0'
# in t/10-regression.t at line 2259.
# got: undef
# expected: '0'
Can't locate TAPX/Parser/Builder.pm in @INC (@INC contains: lib /home/chris/.cpanplus/5.8.8/build/TAPx-Parser-0.31/blib/lib /home/chris/.cpanplus/5.8.8/build/TAPx-Parser-0.31/blib/arch /home/chris/.cpanplus/5.8.8/build/TAPx-Parser-0.31/blib /usr/lib/perl5/5.8.8/i386-netbsd-thread-multi-64int /usr/lib/perl5/5.8.8/i386-netbsd-thread-multi-64int /usr/lib/perl5/5.8.8 /usr/lib/perl5/site_perl/5.8.8/i386-netbsd-thread-multi-64int /usr/lib/perl5/site_perl/5.8.8/i386-netbsd-thread-multi-64int /usr/lib/perl5/site_perl/5.8.8 /usr/lib/perl5/site_perl/5.8.8/i386-netbsd-thread-multi-64int /usr/lib/perl5/site_perl/5.8.8 /usr/lib/perl5/site_perl . /usr/lib/perl5/5.8.8/i386-netbsd-thread-multi-64int /usr/lib/perl5/5.8.8 /usr/lib/perl5/site_perl/5.8.8/i386-netbsd-thread-multi-64int /usr/lib/perl5/site_perl/5.8.8 /usr/lib/perl5/site_perl .).
BEGIN failed--compilation aborted.
# Looks like your test died before it could output anything.
# Failed test '... and we should have the correct number of results'
# in t/10-regression.t at line 2297.
# Failed test '... and good_plan should return a reasonable value'
# in t/10-regression.t at line 2253.
# Failed test '... and parse_errors should be the correct amount'
# in t/10-regression.t at line 2263.
# got: '1'
# expected: '0'
# Failed test '...... and the correct values'
# in t/10-regression.t at line 2265.
# Structures begin differing at:
# $got->[0] = 'No plan found in TAP output'
# $expected->[0] = Does not exist
# @got = (
# 'No plan found in TAP output'
# );
# @expected = ();
# Failed test '... and tests_run should equal 4'
# in t/10-regression.t at line 2259.
# got: '0'
# expected: '4'
# Failed test '... and actual_passed should be the correct amount'
# in t/10-regression.t at line 2263.
# got: '0'
# expected: '4'
# Failed test '...... and the correct values'
# in t/10-regression.t at line 2265.
# Structures begin differing at:
# $got->[0] = Does not exist
# $expected->[0] = '1'
# @got = ();
# @expected = (
# 1,
# 2,
# 3,
# 4
# );
# Failed test '... and exit should equal 0'
# in t/10-regression.t at line 2259.
# got: '255'
# expected: '0'
# Failed test '... and passed should be the correct amount'
# in t/10-regression.t at line 2263.
# got: '0'
# expected: '4'
# Failed test '...... and the correct values'
# in t/10-regression.t at line 2265.
# Structures begin differing at:
# $got->[0] = Does not exist
# $expected->[0] = '1'
# @got = ();
# @expected = (
# 1,
# 2,
# 3,
# 4
# );
# Failed test '... and is_good_plan should return a reasonable value'
# in t/10-regression.t at line 2253.
# Failed test '... and wait should equal 0'
# in t/10-regression.t at line 2259.
# got: '65280'
# expected: '0'
# Failed test '... and plan should equal 1..4'
# in t/10-regression.t at line 2259.
# got: ''
# expected: '1..4'
# Failed test '... and tests_planned should equal 4'
# in t/10-regression.t at line 2259.
# got: undef
# expected: '4'
Can't locate TAPX/Parser/Builder.pm in @INC (@INC contains: lib /home/chris/.cpanplus/5.8.8/build/TAPx-Parser-0.31/blib/lib /home/chris/.cpanplus/5.8.8/build/TAPx-Parser-0.31/blib/arch /home/chris/.cpanplus/5.8.8/build/TAPx-Parser-0.31/blib /usr/lib/perl5/5.8.8/i386-netbsd-thread-multi-64int /usr/lib/perl5/5.8.8/i386-netbsd-thread-multi-64int /usr/lib/perl5/5.8.8 /usr/lib/perl5/site_perl/5.8.8/i386-netbsd-thread-multi-64int /usr/lib/perl5/site_perl/5.8.8/i386-netbsd-thread-multi-64int /usr/lib/perl5/site_perl/5.8.8 /usr/lib/perl5/site_perl/5.8.8/i386-netbsd-thread-multi-64int /usr/lib/perl5/site_perl/5.8.8 /usr/lib/perl5/site_perl . /usr/lib/perl5/5.8.8/i386-netbsd-thread-multi-64int /usr/lib/perl5/5.8.8 /usr/lib/perl5/site_perl/5.8.8/i386-netbsd-thread-multi-64int /usr/lib/perl5/site_perl/5.8.8 /usr/lib/perl5/site_perl .).
BEGIN failed--compilation aborted.
# Looks like your test died before it could output anything.
# Failed test '... and we should have the correct number of results'
# in t/10-regression.t at line 2297.
# Failed test '... and good_plan should return a reasonable value'
# in t/10-regression.t at line 2253.
# Failed test '... and parse_errors should be the correct amount'
# in t/10-regression.t at line 2263.
# got: '1'
# expected: '0'
# Failed test '...... and the correct values'
# in t/10-regression.t at line 2265.
# Structures begin differing at:
# $got->[0] = 'No plan found in TAP output'
# $expected->[0] = Does not exist
# @got = (
# 'No plan found in TAP output'
# );
# @expected = ();
# Failed test '... and tests_run should return a reasonable value'
# in t/10-regression.t at line 2253.
# Failed test '... and actual_passed should be the correct amount'
# in t/10-regression.t at line 2263.
# got: '0'
# expected: '1'
# Failed test '...... and the correct values'
# in t/10-regression.t at line 2265.
# Structures begin differing at:
# $got->[0] = Does not exist
# $expected->[0] = '1'
# @got = ();
# @expected = (
# 1
# );
# Failed test '... and exit should equal 0'
# in t/10-regression.t at line 2259.
# got: '255'
# expected: '0'
# Failed test '... and passed should be the correct amount'
# in t/10-regression.t at line 2263.
# got: '0'
# expected: '1'
# Failed test '...... and the correct values'
# in t/10-regression.t at line 2265.
# Structures begin differing at:
# $got->[0] = Does not exist
# $expected->[0] = '1'
# @got = ();
# @expected = (
# 1
# );
# Failed test '... and is_good_plan should return a reasonable value'
# in t/10-regression.t at line 2253.
# Failed test '... and wait should equal 0'
# in t/10-regression.t at line 2259.
# got: '65280'
# expected: '0'
# Failed test '... and plan should equal 1..1'
# in t/10-regression.t at line 2259.
# got: ''
# expected: '1..1'
# Failed test '... and tests_planned should equal 1'
# in t/10-regression.t at line 2259.
# got: undef
# expected: '1'
Can't locate TAPX/Parser/Builder.pm in @INC (@INC contains: lib t/lib /home/chris/.cpanplus/5.8.8/build/TAPx-Parser-0.31/blib/lib /home/chris/.cpanplus/5.8.8/build/TAPx-Parser-0.31/blib/arch /home/chris/.cpanplus/5.8.8/build/TAPx-Parser-0.31/blib /usr/lib/perl5/5.8.8/i386-netbsd-thread-multi-64int /usr/lib/perl5/5.8.8 /usr/lib/perl5/site_perl/5.8.8/i386-netbsd-thread-multi-64int /usr/lib/perl5/site_perl/5.8.8 /usr/lib/perl5/site_perl).
BEGIN failed--compilation aborted.
# Looks like your test died before it could output anything.
# Failed test '... and we should have the correct number of results'
# in t/10-regression.t at line 2297.
# Failed test '... and good_plan should return a reasonable value'
# in t/10-regression.t at line 2253.
# Failed test '... and parse_errors should be the correct amount'
# in t/10-regression.t at line 2263.
# got: '1'
# expected: '0'
# Failed test '...... and the correct values'
# in t/10-regression.t at line 2265.
# Structures begin differing at:
# $got->[0] = 'No plan found in TAP output'
# $expected->[0] = Does not exist
# @got = (
# 'No plan found in TAP output'
# );
# @expected = ();
# Failed test '... and tests_run should return a reasonable value'
# in t/10-regression.t at line 2253.
# Failed test '... and actual_passed should be the correct amount'
# in t/10-regression.t at line 2263.
# got: '0'
# expected: '1'
# Failed test '...... and the correct values'
# in t/10-regression.t at line 2265.
# Structures begin differing at:
# $got->[0] = Does not exist
# $expected->[0] = '1'
# @got = ();
# @expected = (
# 1
# );
# Failed test '... and exit should equal 0'
# in t/10-regression.t at line 2259.
# got: '255'
# expected: '0'
# Failed test '... and passed should be the correct amount'
# in t/10-regression.t at line 2263.
# got: '0'
# expected: '1'
# Failed test '...... and the correct values'
# in t/10-regression.t at line 2265.
# Structures begin differing at:
# $got->[0] = Does not exist
# $expected->[0] = '1'
# @got = ();
# @expected = (
# 1
# );
# Failed test '... and is_good_plan should return a reasonable value'
# in t/10-regression.t at line 2253.
# Failed test '... and wait should equal 0'
# in t/10-regression.t at line 2259.
# got: '65280'
# expected: '0'
# Failed test '... and plan should equal 1..1'
# in t/10-regression.t at line 2259.
# got: ''
# expected: '1..1'
# Failed test '... and tests_planned should return a reasonable value'
# in t/10-regression.t at line 2253.
Can't locate TAPX/Parser/Builder.pm in @INC (@INC contains: lib /home/chris/.cpanplus/5.8.8/build/TAPx-Parser-0.31/blib/lib /home/chris/.cpanplus/5.8.8/build/TAPx-Parser-0.31/blib/arch /home/chris/.cpanplus/5.8.8/build/TAPx-Parser-0.31/blib /usr/lib/perl5/5.8.8/i386-netbsd-thread-multi-64int /usr/lib/perl5/5.8.8/i386-netbsd-thread-multi-64int /usr/lib/perl5/5.8.8 /usr/lib/perl5/site_perl/5.8.8/i386-netbsd-thread-multi-64int /usr/lib/perl5/site_perl/5.8.8/i386-netbsd-thread-multi-64int /usr/lib/perl5/site_perl/5.8.8 /usr/lib/perl5/site_perl/5.8.8/i386-netbsd-thread-multi-64int /usr/lib/perl5/site_perl/5.8.8 /usr/lib/perl5/site_perl . /usr/lib/perl5/5.8.8/i386-netbsd-thread-multi-64int /usr/lib/perl5/5.8.8 /usr/lib/perl5/site_perl/5.8.8/i386-netbsd-thread-multi-64int /usr/lib/perl5/site_perl/5.8.8 /usr/lib/perl5/site_perl .).
BEGIN failed--compilation aborted.
# Looks like your test died before it could output anything.
# Failed test '... and we should have the correct number of results'
# in t/10-regression.t at line 2297.
# Failed test '... and good_plan should return a reasonable value'
# in t/10-regression.t at line 2253.
# Failed test '... and parse_errors should be the correct amount'
# in t/10-regression.t at line 2263.
# got: '1'
# expected: '0'
# Failed test '...... and the correct values'
# in t/10-regression.t at line 2265.
# Structures begin differing at:
# $got->[0] = 'No plan found in TAP output'
# $expected->[0] = Does not exist
# @got = (
# 'No plan found in TAP output'
# );
# @expected = ();
# Failed test '... and tests_run should equal 3'
# in t/10-regression.t at line 2259.
# got: '0'
# expected: '3'
# Failed test '... and actual_passed should be the correct amount'
# in t/10-regression.t at line 2263.
# got: '0'
# expected: '2'
# Failed test '...... and the correct values'
# in t/10-regression.t at line 2265.
# Structures begin differing at:
# $got->[0] = Does not exist
# $expected->[0] = '2'
# @got = ();
# @expected = (
# 2,
# 3
# );
# Failed test '... and exit should equal 0'
# in t/10-regression.t at line 2259.
# got: '255'
# expected: '0'
# Failed test '... and passed should be the correct amount'
# in t/10-regression.t at line 2263.
# got: '0'
# expected: '3'
# Failed test '...... and the correct values'
# in t/10-regression.t at line 2265.
# Structures begin differing at:
# $got->[0] = Does not exist
# $expected->[0] = '1'
# @got = ();
# @expected = (
# 1,
# 2,
# 3
# );
# Failed test '... and is_good_plan should return a reasonable value'
# in t/10-regression.t at line 2253.
# Failed test '... and actual_failed should be the correct amount'
# in t/10-regression.t at line 2263.
# got: '0'
# expected: '1'
# Failed test '...... and the correct values'
# in t/10-regression.t at line 2265.
# Structures begin differing at:
# $got->[0] = Does not exist
# $expected->[0] = '1'
# @got = ();
# @expected = (
# 1
# );
# Failed test '... and todo_failed should be the correct amount'
# in t/10-regression.t at line 2263.
# got: '0'
# expected: '1'
# Failed test '...... and the correct values'
# in t/10-regression.t at line 2265.
# Structures begin differing at:
# $got->[0] = Does not exist
# $expected->[0] = '2'
# @got = ();
# @expected = (
# 2
# );
# Failed test '... and wait should equal 0'
# in t/10-regression.t at line 2259.
# got: '65280'
# expected: '0'
# Failed test '... and plan should equal 1..3'
# in t/10-regression.t at line 2259.
# got: ''
# expected: '1..3'
# Failed test '... and tests_planned should equal 3'
# in t/10-regression.t at line 2259.
# got: undef
# expected: '3'
# Failed test '... and todo should be the correct amount'
# in t/10-regression.t at line 2263.
# got: '0'
# expected: '2'
# Failed test '...... and the correct values'
# in t/10-regression.t at line 2265.
# Structures begin differing at:
# $got->[0] = Does not exist
# $expected->[0] = '1'
# @got = ();
# @expected = (
# 1,
# 2
# );
Can't locate TAPX/Parser/Builder.pm in @INC (@INC contains: lib /home/chris/.cpanplus/5.8.8/build/TAPx-Parser-0.31/blib/lib /home/chris/.cpanplus/5.8.8/build/TAPx-Parser-0.31/blib/arch /home/chris/.cpanplus/5.8.8/build/TAPx-Parser-0.31/blib /usr/lib/perl5/5.8.8/i386-netbsd-thread-multi-64int /usr/lib/perl5/5.8.8/i386-netbsd-thread-multi-64int /usr/lib/perl5/5.8.8 /usr/lib/perl5/site_perl/5.8.8/i386-netbsd-thread-multi-64int /usr/lib/perl5/site_perl/5.8.8/i386-netbsd-thread-multi-64int /usr/lib/perl5/site_perl/5.8.8 /usr/lib/perl5/site_perl/5.8.8/i386-netbsd-thread-multi-64int /usr/lib/perl5/site_perl/5.8.8 /usr/lib/perl5/site_perl . /usr/lib/perl5/5.8.8/i386-netbsd-thread-multi-64int /usr/lib/perl5/5.8.8 /usr/lib/perl5/site_perl/5.8.8/i386-netbsd-thread-multi-64int /usr/lib/perl5/site_perl/5.8.8 /usr/lib/perl5/site_perl .).
BEGIN failed--compilation aborted.
# Looks like your test died before it could output anything.
# Failed test '... and we should have the correct number of results'
# in t/10-regression.t at line 2297.
# Failed test '... and good_plan should return a reasonable value'
# in t/10-regression.t at line 2253.
# Failed test '... and parse_errors should be the correct amount'
# in t/10-regression.t at line 2263.
# got: '1'
# expected: '0'
# Failed test '...... and the correct values'
# in t/10-regression.t at line 2265.
# Structures begin differing at:
# $got->[0] = 'No plan found in TAP output'
# $expected->[0] = Does not exist
# @got = (
# 'No plan found in TAP output'
# );
# @expected = ();
# Failed test '... and tests_run should equal 1'
# in t/10-regression.t at line 2259.
# got: '0'
# expected: '1'
# Failed test '... and exit should equal 0'
# in t/10-regression.t at line 2259.
# got: '255'
# expected: '0'
# Failed test '... and failed should be the correct amount'
# in t/10-regression.t at line 2263.
# got: '0'
# expected: '1'
# Failed test '...... and the correct values'
# in t/10-regression.t at line 2265.
# Structures begin differing at:
# $got->[0] = Does not exist
# $expected->[0] = '1'
# @got = ();
# @expected = (
# 1
# );
# Failed test '... and is_good_plan should return a reasonable value'
# in t/10-regression.t at line 2253.
# Failed test '... and actual_failed should be the correct amount'
# in t/10-regression.t at line 2263.
# got: '0'
# expected: '1'
# Failed test '...... and the correct values'
# in t/10-regression.t at line 2265.
# Structures begin differing at:
# $got->[0] = Does not exist
# $expected->[0] = '1'
# @got = ();
# @expected = (
# 1
# );
# Failed test '... and wait should equal 0'
# in t/10-regression.t at line 2259.
# got: '65280'
# expected: '0'
# Failed test '... and plan should equal 1..1'
# in t/10-regression.t at line 2259.
# got: ''
# expected: '1..1'
# Failed test '... and tests_planned should return a reasonable value'
# in t/10-regression.t at line 2253.
Can't locate TAPX/Parser/Builder.pm in @INC (@INC contains: lib /home/chris/.cpanplus/5.8.8/build/TAPx-Parser-0.31/blib/lib /home/chris/.cpanplus/5.8.8/build/TAPx-Parser-0.31/blib/arch /home/chris/.cpanplus/5.8.8/build/TAPx-Parser-0.31/blib /usr/lib/perl5/5.8.8/i386-netbsd-thread-multi-64int /usr/lib/perl5/5.8.8/i386-netbsd-thread-multi-64int /usr/lib/perl5/5.8.8 /usr/lib/perl5/site_perl/5.8.8/i386-netbsd-thread-multi-64int /usr/lib/perl5/site_perl/5.8.8/i386-netbsd-thread-multi-64int /usr/lib/perl5/site_perl/5.8.8 /usr/lib/perl5/site_perl/5.8.8/i386-netbsd-thread-multi-64int /usr/lib/perl5/site_perl/5.8.8 /usr/lib/perl5/site_perl . /usr/lib/perl5/5.8.8/i386-netbsd-thread-multi-64int /usr/lib/perl5/5.8.8 /usr/lib/perl5/site_perl/5.8.8/i386-netbsd-thread-multi-64int /usr/lib/perl5/site_perl/5.8.8 /usr/lib/perl5/site_perl .).
BEGIN failed--compilation aborted.
# Looks like your test died before it could output anything.
# Failed test '... and we should have the correct number of results'
# in t/10-regression.t at line 2297.
# Failed test '...... and the correct values'
# in t/10-regression.t at line 2265.
# Structures begin differing at:
# $got->[0] = 'No plan found in TAP output'
# $expected->[0] = 'Bad plan. You planned 3 tests but ran 7.'
# @got = (
# 'No plan found in TAP output'
# );
# @expected = (
# 'Bad plan. You planned 3 tests but ran 7.'
# );
# Failed test '... and tests_run should equal 7'
# in t/10-regression.t at line 2259.
# got: '0'
# expected: '7'
# Failed test '... and actual_passed should be the correct amount'
# in t/10-regression.t at line 2263.
# got: '0'
# expected: '7'
# Failed test '...... and the correct values'
# in t/10-regression.t at line 2265.
# Structures begin differing at:
# $got->[0] = Does not exist
# $expected->[0] = '1'
# @got = ();
# @expected = (
# 1,
# 2,
# 3,
# 4,
# 5,
# 6,
# 7
# );
# Failed test '... and exit should equal 4'
# in t/10-regression.t at line 2259.
# got: '255'
# expected: '4'
# Failed test '... and passed should be the correct amount'
# in t/10-regression.t at line 2263.
# got: '0'
# expected: '7'
# Failed test '...... and the correct values'
# in t/10-regression.t at line 2265.
# Structures begin differing at:
# $got->[0] = Does not exist
# $expected->[0] = '1'
# @got = ();
# @expected = (
# 1,
# 2,
# 3,
# 4,
# 5,
# 6,
# 7
# );
# Failed test '... and plan should equal 1..3'
# in t/10-regression.t at line 2259.
# got: ''
# expected: '1..3'
# Failed test '... and tests_planned should equal 3'
# in t/10-regression.t at line 2259.
# got: undef
# expected: '3'
# Looks like you planned 2613 tests but only ran 771.
# Looks like you failed 395 tests of 771 run.
dubious
Test returned status 254 (wstat 65024, 0xfe00)
DIED. FAILED tests 1, 4-12, 17, 22-24, 27, 31-38, 47-49, 52, 56-63, 72-74, 77, 80-103, 106-114, 119, 124-126, 138, 154, 160-165, 179, 182-190, 195, 201-202, 205, 209-216, 225-227, 230, 233-241, 246, 251-253, 256, 259-269, 272-274, 277-279, 282, 285-293, 298, 303-305, 308, 311-321, 324-326, 329-331, 343, 354, 359, 363-370, 379-381, 384, 387-395, 405-406, 409, 412-420, 425, 430-432, 435, 438-446, 451, 456-458, 461, 464-472, 477, 482-484, 487, 490-500, 503-505, 508-510, 513, 516-524, 527-529, 534-536, 539, 542-550, 553-555, 560-562, 565, 568-570, 574, 581, 586-588, 591, 594-596, 600, 607, 612-614, 617, 620-628, 633, 638-640, 643, 646-654, 659, 664-666, 669, 672-680, 685, 690-692, 695, 698-706, 711-721, 724-727, 730, 733-734, 737-739, 742-744, 747, 752-758, 768-769, 772-2613
Failed 2237/2613 tests, 14.39% okay
t/20-parse................ok
t/30-bailout..............ok
t/40-errors...............ok
t/50-streams..............ok
t/60-aggregator...........ok
t/70-callbacks............ok
t/80-premature-bailout....ok
t/90-iterators............ok
t/pod-coverage............ok
t/pod.....................ok
Failed Test Stat Wstat Total Fail List of Failed
-------------------------------------------------------------------------------
t/10-regression.t 254 65024 2613 4079 1 4-12 17 22-24 27 31-38 47-49 52 56-
63 72-74 77 80-103 106-114 119 124-126
138 154 160-165 179 182-190 195 201-
202 205 209-216 225-227 230 233-241
246 251-253 256 259-269 272-274 277-
279 282 285-293 298 303-305 308 311-
321 324-326 329-331 343 354 359 363-
370 379-381 384 387-395 405-406 409
412-420 425 430-432 435 438-446 451
456-458 461 464-472 477 482-484 487
490-500 503-505 508-510 513 516-524
527-529 534-536 539 542-550 553-555
560-562 565 568-570 574 581 586-588
591 594-596 600 607 612-614 617 620-
628 633 638-640 643 646-654 659 664-
666 669 672-680 685 690-692 695 698-
706 711-721 724-727 730 733-734 737-
739 742-744 747 752-758 768-769 772-
2613
Failed 1/12 test scripts. 2237/3070 subtests failed.
Files=12, Tests=3070, 11 wallclock secs ( 5.74 cusr + 0.95 csys = 6.69 CPU)
Failed 1/12 test programs. 2237/3070 subtests failed.
gmake: *** [test_dynamic] Error 25
MISSING PREREQUISITES:
It was observed that the test suite seem to fail without these modules:
TAPX::Parser::Builder
As such, adding the prerequisite module(s) to 'PREREQ_PM' in your
Makefile.PL should solve this problem. For example:
WriteMakefile(
AUTHOR => 'Curtis 'Ovid' Poe (ovid@cpan.org)',
... # other information
PREREQ_PM => {
'TAPX::Parser::Builder' => '0', # or a minimum working version
}
);
If you are interested in making a more flexible Makefile.PL that can
probe for missing dependencies and install them, ExtUtils::AutoInstall
at <http://search.cpan.org/dist/ExtUtils-AutoInstall/> may be
worth a look.
Thanks! :-)
PREREQUISITES:
Here is a list of prerequisites you specified and versions we
managed to load:
Test::More 0.64
******************************** NOTE ********************************
The comments above are created mechanically, possibly without manual
checking by the sender. As there are many people performing automatic
tests on each upload to CPAN, it is likely that you will receive
identical messages about the same problem.
If you believe that the message is mistaken, please reply to the first
one with correction and/or additional informations, and do not take
it personally. We appreciate your patience. :)
**********************************************************************
Additional comments:
This report was machine-generated by CPAN::YACSmoke 0.0307.
--
Summary of my perl5 (revision 5 version 8 subversion 8) configuration:
Platform:
osname=netbsd, osvers=3.0, archname=i386-netbsd-thread-multi-64int
uname='netbsd canker.bingosnet.co.uk 3.0 netbsd 3.0 (generic_laptop) #0: mon dec 19 01:08:52 utc 2005 builds@works.netbsd.org:homebuildsabnetbsd-3-0-releasei386200512182024z-objhomebuildsabnetbsd-3-0-releasesrcsysarchi386compilegeneric_laptop i386 '
config_args=''
hint=recommended, useposix=true, d_sigaction=define
usethreads=define use5005threads=undef useithreads=define usemultiplicity=define
useperlio=define d_sfio=undef uselargefiles=define usesocks=undef
use64bitint=define use64bitall=undef uselongdouble=undef
usemymalloc=n, bincompat5005=undef
Compiler:
cc='cc', ccflags ='-fno-strict-aliasing -pipe -I/usr/pkg/include',
optimize='-O',
cppflags='-fno-strict-aliasing -pipe -I/usr/pkg/include'
ccversion='', gccversion='3.3.3 (NetBSD nb3 20040520)', gccosandvers=''
intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=12345678
d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=12
ivtype='long long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8
alignbytes=4, prototype=define
Linker and Libraries:
ld='cc', ldflags =' -Wl,-rpath,/usr/pkg/lib -Wl,-rpath,/usr/local/lib -L/usr/pkg/lib'
libpth=/usr/pkg/lib /lib /usr/lib
libs=-lm -lcrypt -lutil -lc -lposix -lpthread
perllibs=-lm -lcrypt -lutil -lc -lposix -lpthread
libc=/lib/libc.so, so=so, useshrplib=false, libperl=libperl.a
gnulibc_version=''
Dynamic Linking:
dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E '
cccdlflags='-DPIC -fPIC ', lddlflags='--whole-archive -shared -L/usr/pkg/lib'
-
FAIL TAPx-Parser-0.31 i386-netbsd-thread-multi-64int 3.0
by chris