Front page | perl.cpan.testers |
Postings from November 2006
FAIL Querylet-0.321 x86_64-linux-thread-multi-ld 2.6.16.14
From:
imacat
Date:
November 16, 2006 05:44
Subject:
FAIL Querylet-0.321 x86_64-linux-thread-multi-ld 2.6.16.14
This distribution has been tested as part of the cpan-testers
effort to test as many new uploads to CPAN as possible. See
http://testers.cpan.org/
Please cc any replies to cpan-testers@perl.org to keep other
test volunteers informed and to prevent any duplicate effort.
--
Dear RJBS,
This is a computer-generated error report created automatically by
CPANPLUS, version 0.074. Testers personal comments may appear
at the end of this report.
Thank you for uploading your work to CPAN. However, it appears that
there were some problems testing your distribution.
TEST RESULTS:
Below is the error stack from stage 'make test':
[MSG] [Thu Nov 16 21:42:24 2006] Trying to get 'http://www.cpan.org/authors/id/R/RJ/RJBS/Querylet-0.321.tar.gz'
[MSG] [Thu Nov 16 21:42:34 2006] Trying to get 'http://www.cpan.org/authors/id/R/RJ/RJBS/CHECKSUMS'
[MSG] [Thu Nov 16 21:42:47 2006] Checksum matches for 'Querylet-0.321.tar.gz'
[MSG] [Thu Nov 16 21:42:47 2006] Extracted 'Querylet-0.321/'
[MSG] [Thu Nov 16 21:42:47 2006] Extracted 'Querylet-0.321/Changes'
[MSG] [Thu Nov 16 21:42:47 2006] Extracted 'Querylet-0.321/LICENSE'
[MSG] [Thu Nov 16 21:42:47 2006] Extracted 'Querylet-0.321/MANIFEST'
[MSG] [Thu Nov 16 21:42:47 2006] Extracted 'Querylet-0.321/META.yml'
[MSG] [Thu Nov 16 21:42:47 2006] Extracted 'Querylet-0.321/Makefile.PL'
[MSG] [Thu Nov 16 21:42:47 2006] Extracted 'Querylet-0.321/README'
[MSG] [Thu Nov 16 21:42:47 2006] Extracted 'Querylet-0.321/lib/'
[MSG] [Thu Nov 16 21:42:47 2006] Extracted 'Querylet-0.321/lib/Querylet/'
[MSG] [Thu Nov 16 21:42:47 2006] Extracted 'Querylet-0.321/lib/Querylet/Input.pm'
[MSG] [Thu Nov 16 21:42:47 2006] Extracted 'Querylet-0.321/lib/Querylet/Output.pm'
[MSG] [Thu Nov 16 21:42:47 2006] Extracted 'Querylet-0.321/lib/Querylet/Query.pm'
[MSG] [Thu Nov 16 21:42:47 2006] Extracted 'Querylet-0.321/lib/Querylet.pm'
[MSG] [Thu Nov 16 21:42:47 2006] Extracted 'Querylet-0.321/t/'
[MSG] [Thu Nov 16 21:42:47 2006] Extracted 'Querylet-0.321/t/00-load.t'
[MSG] [Thu Nov 16 21:42:47 2006] Extracted 'Querylet-0.321/t/01-makedb.t'
[MSG] [Thu Nov 16 21:42:47 2006] Extracted 'Querylet-0.321/t/as_bogus.t'
[MSG] [Thu Nov 16 21:42:47 2006] Extracted 'Querylet-0.321/t/as_code.t'
[MSG] [Thu Nov 16 21:42:48 2006] Extracted 'Querylet-0.321/t/as_csv.t'
[MSG] [Thu Nov 16 21:42:48 2006] Extracted 'Querylet-0.321/t/as_html.t'
[MSG] [Thu Nov 16 21:42:48 2006] Extracted 'Querylet-0.321/t/as_null.t'
[MSG] [Thu Nov 16 21:42:48 2006] Extracted 'Querylet-0.321/t/eg_wafer_01.t'
[MSG] [Thu Nov 16 21:42:48 2006] Extracted 'Querylet-0.321/t/eg_wafer_02.t'
[MSG] [Thu Nov 16 21:42:48 2006] Extracted 'Querylet-0.321/t/eg_wafer_03.t'
[MSG] [Thu Nov 16 21:42:48 2006] Extracted 'Querylet-0.321/t/from_3.t'
[MSG] [Thu Nov 16 21:42:48 2006] Extracted 'Querylet-0.321/t/option.t'
[MSG] [Thu Nov 16 21:42:48 2006] Extracted 'Querylet-0.321/t/output.t'
[MSG] [Thu Nov 16 21:42:48 2006] Extracted 'Querylet-0.321/t/pod-coverage.t'
[MSG] [Thu Nov 16 21:42:48 2006] Extracted 'Querylet-0.321/t/pod.t'
[MSG] [Thu Nov 16 21:42:48 2006] Extracted 'Querylet-0.321/t/query.t'
[MSG] [Thu Nov 16 21:42:48 2006] Extracted 'Querylet-0.321/t/to_dot.t'
[MSG] [Thu Nov 16 21:42:48 2006] Extracted 'Querylet-0.321/t/to_file.t'
[MSG] [Thu Nov 16 21:42:48 2006] Extracted 'Querylet-0.321/t/to_stdout.t'
[MSG] [Thu Nov 16 21:42:48 2006] Extracted 'Querylet' to '/opt/perl/testers/.cpanplus/5.8.8/build/Querylet-0.321'
[MSG] [Thu Nov 16 21:42:48 2006] Checking if your kit is complete...
Looks good
Writing Makefile for Querylet
[MSG] [Thu Nov 16 21:42:48 2006] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value'
[MSG] [Thu Nov 16 21:42:48 2006] Module 'Querylet' requires 'DBI' version '1' to be installed
[MSG] [Thu Nov 16 21:42:58 2006]
*** You are using a perl configured with threading enabled.
*** You should be aware that using multiple threads is
*** not recommended for production environments.
*** Note:
The optional PlRPC-modules (RPC::PlServer etc) are not installed.
If you want to use the DBD::Proxy driver and DBI::ProxyServer
modules, then you'll need to install the RPC::PlServer, RPC::PlClient,
Storable and Net::Daemon modules. The CPAN Bundle::DBI may help you.
You can install them any time after installing the DBI.
You do *not* need these modules for typical DBI usage.
Optional modules are available from any CPAN mirror, in particular
http://search.cpan.org/
http://www.perl.com/CPAN/modules/by-module
http://www.perl.org/CPAN/modules/by-module
ftp://ftp.funet.fi/pub/languages/perl/CPAN/modules/by-module
Your perl was compiled with gcc (version 3.4.4 20050314 (prerelease) (Debian 3.4.3-13)), okay.
Creating DBI::PurePerl test variant: t/zvpp_01basics.t
Creating DBI::PurePerl test variant: t/zvpp_02dbidrv.t
Creating DBI::PurePerl test variant: t/zvpp_03handle.t
Creating DBI::PurePerl test variant: t/zvpp_04mods.t
Creating DBI::PurePerl test variant: t/zvpp_05thrclone.t (use threads)
Creating DBI::PurePerl test variant: t/zvpp_06attrs.t
Creating DBI::PurePerl test variant: t/zvpp_07kids.t
Creating DBI::PurePerl test variant: t/zvpp_08keeperr.t
Creating DBI::PurePerl test variant: t/zvpp_09trace.t
Creating DBI::PurePerl test variant: t/zvpp_10examp.t
Creating DBI::PurePerl test variant: t/zvpp_11fetch.t
Creating DBI::PurePerl test variant: t/zvpp_14utf8.t
Creating DBI::PurePerl test variant: t/zvpp_15array.t
Creating DBI::PurePerl test variant: t/zvpp_20meta.t
Creating DBI::PurePerl test variant: t/zvpp_30subclass.t
Creating DBI::PurePerl test variant: t/zvpp_40profile.t
Creating DBI::PurePerl test variant: t/zvpp_41prof_dump.t
Creating DBI::PurePerl test variant: t/zvpp_42prof_data.t
Creating DBI::PurePerl test variant: t/zvpp_43prof_env.t
Creating DBI::PurePerl test variant: t/zvpp_50dbm.t
Creating DBI::PurePerl test variant: t/zvpp_60preparse.t
Creating DBI::PurePerl test variant: t/zvpp_70callbacks.t
Creating DBI::PurePerl test variant: t/zvpp_72childhandles.t
Creating DBI::PurePerl test variant: t/zvpp_80proxy.t
I see you're using perl 5.008008 on x86_64-linux-thread-multi-ld, okay.
Remember to actually *read* the README file!
Use 'make' to build the software (dmake or nmake on Windows).
Then 'make test' to execute self tests.
Then 'make install' to install the DBI and then delete this working
directory before unpacking and building any DBD::* drivers.
Writing Makefile for DBI
[MSG] [Thu Nov 16 21:43:04 2006] Running Mkbootstrap for DBI ()
Manifying blib/man1/dbiprof.1
Manifying blib/man1/dbiproxy.1
Manifying blib/man3/DBI::FAQ.3
Manifying blib/man3/DBI::SQL::Nano.3
Manifying blib/man3/DBD::Proxy.3
Manifying blib/man3/DBI::Const::GetInfo::ANSI.3
Manifying blib/man3/DBD::DBM.3
Manifying blib/man3/DBI::Const::GetInfoReturn.3
Manifying blib/man3/DBI.3
Manifying blib/man3/DBD::Sponge.3
Manifying blib/man3/DBI::Const::GetInfoType.3
Manifying blib/man3/Roadmap.3
Manifying blib/man3/DBI::DBD::Metadata.3
Manifying blib/man3/DBI::W32ODBC.3
Manifying blib/man3/DBI::Const::GetInfo::ODBC.3
Manifying blib/man3/DBI::ProfileDumper::Apache.3
Manifying blib/man3/Bundle::DBI.3
Manifying blib/man3/TASKS.3
Manifying blib/man3/DBI::Profile.3
Manifying blib/man3/DBD::File.3
Manifying blib/man3/DBI::ProfileDumper.3
Manifying blib/man3/DBI::ProxyServer.3
Manifying blib/man3/DBI::ProfileSubs.3
Manifying blib/man3/DBI::DBD.3
Manifying blib/man3/Win32::DBIODBC.3
Manifying blib/man3/DBI::PurePerl.3
Manifying blib/man3/DBI::ProfileData.3
[MSG] [Thu Nov 16 21:43:15 2006] MAKE TEST passed: t/01basics...............ok
4/131 skipped: developer tests
t/02dbidrv...............ok
t/03handle...............ok
t/04mods.................ok
t/05thrclone.............ok
t/06attrs................ok
t/07kids.................ok
t/08keeperr..............ok
t/09trace................ok
t/10examp................ok
t/11fetch................ok
t/14utf8.................ok
t/15array................ok
t/20meta.................ok
t/30subclass.............ok
t/40profile..............ok
t/41prof_dump............ok
t/42prof_data............ok
t/43prof_env.............ok
t/50dbm..................ok
t/60preparse.............ok
t/70callbacks............ok
t/72childhandles.........ok
t/80proxy................skipped
all skipped: modules required for proxy are probably not installed (e.g., RPC/PlClient.pm)
t/pod....................ok
t/zvpp_01basics..........ok
4/131 skipped: developer tests
t/zvpp_02dbidrv..........ok
10/51 skipped: various reasons
t/zvpp_03handle..........ok
76/137 skipped: various reasons
t/zvpp_04mods............ok
t/zvpp_05thrclone........ok
t/zvpp_06attrs...........ok
7/137 skipped: various reasons
t/zvpp_07kids............skipped
all skipped: $h->{Kids} attribute not supported for DBI::PurePerl
t/zvpp_08keeperr.........ok
t/zvpp_09trace...........ok
t/zvpp_10examp...........ok
39/263 skipped: various reasons
t/zvpp_11fetch...........ok
t/zvpp_14utf8............ok
t/zvpp_15array...........ok
t/zvpp_20meta............ok
t/zvpp_30subclass........ok
t/zvpp_40profile.........skipped
all skipped: profiling not supported for DBI::PurePerl
t/zvpp_41prof_dump.......skipped
all skipped: profiling not supported for DBI::PurePerl
t/zvpp_42prof_data.......skipped
all skipped: profiling not supported for DBI::PurePerl
t/zvpp_43prof_env........skipped
all skipped: profiling not supported for DBI::PurePerl
t/zvpp_50dbm.............ok
t/zvpp_60preparse........skipped
all skipped: preparse not supported for DBI::PurePerl
t/zvpp_70callbacks.......skipped
all skipped: $h->{Callbacks} attribute not supported for DBI::PurePerl
t/zvpp_72childhandles....ok
t/zvpp_80proxy...........skipped
all skipped: modules required for proxy are probably not installed (e.g., RPC/PlClient.pm)
All tests successful, 9 tests and 140 subtests skipped.
Files=49, Tests=2370, 9 wallclock secs ( 7.28 cusr + 1.91 csys = 9.19 CPU)
test.pl
DBI test application $Revision: 11.7 $
Switch: DBI 1.53 by Tim Bunce, 1.53
Available Drivers: DBM, ExampleP, File, Proxy, Sponge
dbi:ExampleP:: testing 5 sets of 20 connections:
Connecting... 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20
Disconnecting...
Connecting... 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20
Disconnecting...
Connecting... 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20
Disconnecting...
Connecting... 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20
Disconnecting...
Connecting... 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20
Disconnecting...
Made 100 connections in 0 wallclock secs ( 0.00 usr + 0.00 sys = 0.00 CPU)
Testing handle creation speed...
20833 NullP sth/s perl 5.008008 x86_64-linux-thread-multi-ld (gcc 3.4.4 -g -O3)
test.pl done
[MSG] [Thu Nov 16 21:43:15 2006] Ok, not sending test report
[MSG] [Thu Nov 16 21:43:16 2006] cp lib/Querylet.pm blib/lib/Querylet.pm
cp lib/Querylet/Query.pm blib/lib/Querylet/Query.pm
cp lib/Querylet/Input.pm blib/lib/Querylet/Input.pm
cp lib/Querylet/Output.pm blib/lib/Querylet/Output.pm
Manifying blib/man3/Querylet.3
Manifying blib/man3/Querylet::Query.3
Manifying blib/man3/Querylet::Input.3
Manifying blib/man3/Querylet::Output.3
[ERROR] [Thu Nov 16 21:43:18 2006] MAKE TEST failed: ¨S¦³¦¹¤@ÀɮשΥؿý t/00-load.........# Testing 0.321
ok
t/01-makedb.......Undefined subroutine &main::BAIL_OUT called at t/01-makedb.t line 2092.
# Looks like your test died before it could output anything.
dubious
Test returned status 255 (wstat 65280, 0xff00)
DIED. FAILED test 1
Failed 1/1 tests, 0.00% okay
t/as_bogus........skipped
all skipped: DBD::SQLite required to run test querylet
t/as_code.........skipped
all skipped: DBD::SQLite required to run test querylet
t/as_csv..........skipped
all skipped: DBD::SQLite required to run test querylet
t/as_html.........skipped
all skipped: DBD::SQLite required to run this test
t/as_null.........skipped
all skipped: DBD::SQLite required to run test querylet
t/eg_wafer_01.....skipped
all skipped: DBD::SQLite required to run test querylet
t/eg_wafer_02.....skipped
all skipped: DBD::SQLite required to run this test
t/eg_wafer_03.....skipped
all skipped: DBD::SQLite required to run test querylet
t/from_3..........skipped
all skipped: DBD::SQLite required to run test querylet
t/option..........ok
t/output..........ok
t/pod-coverage....ok
t/pod.............ok
t/query...........ok
t/to_dot..........skipped
all skipped: DBD::SQLite required to run test querylet
t/to_file.........skipped
all skipped: DBD::SQLite required to run test querylet
t/to_stdout.......skipped
all skipped: DBD::SQLite required to run test querylet
Failed Test Stat Wstat Total Fail List of Failed
-------------------------------------------------------------------------------
t/01-makedb.t 255 65280 1 2 1
12 tests skipped.
Failed 1/19 test scripts. 1/41 subtests failed.
Files=19, Tests=41, 2 wallclock secs ( 1.30 cusr + 0.64 csys = 1.94 CPU)
Failed 1/19 test programs. 1/41 subtests failed.
make: *** [test_dynamic] Error 255
PREREQUISITES:
Here is a list of prerequisites you specified and versions we
managed to load:
DBI 1.53
Filter::Simple 0.82
Test::More 0.64
******************************** NOTE ********************************
The comments above are created mechanically, possibly without manual
checking by the sender. As there are many people performing automatic
tests on each upload to CPAN, it is likely that you will receive
identical messages about the same problem.
If you believe that the message is mistaken, please reply to the first
one with correction and/or additional informations, and do not take
it personally. We appreciate your patience. :)
**********************************************************************
Additional comments:
This report was machine-generated by CPAN::YACSmoke 0.03.
--
Summary of my perl5 (revision 5 version 8 subversion 8) configuration:
Platform:
osname=linux, osvers=2.6.16.14, archname=x86_64-linux-thread-multi-ld
uname='linux rinse 2.6.16.14 #1 smp mon may 8 23:44:32 cst 2006 x86_64 gnulinux '
config_args='-d -Dusethreads -Dcc=gcc -Duselongdouble -Doptimize=-g -O3 -Duse64bitint -Duse64bitall -Dprefix=/opt/perl/testers -Dd_dosuid -Dinc_version_list=none -Acccdlflags=-fPIC -Duseshrplib=true -Dcf_email=imacat@mail.imacat.idv.tw'
hint=recommended, useposix=true, d_sigaction=define
usethreads=define use5005threads=undef useithreads=define usemultiplicity=define
useperlio=define d_sfio=undef uselargefiles=define usesocks=undef
use64bitint=define use64bitall=define uselongdouble=define
usemymalloc=n, bincompat5005=undef
Compiler:
cc='gcc', ccflags ='-D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS -DDEBUGGING -fno-strict-aliasing -pipe -Wdeclaration-after-statement -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64',
optimize='-g -O3',
cppflags='-D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS -DDEBUGGING -fno-strict-aliasing -pipe -Wdeclaration-after-statement -I/usr/local/include'
ccversion='', gccversion='3.4.4 20050314 (prerelease) (Debian 3.4.3-13)', gccosandvers=''
intsize=4, longsize=8, ptrsize=8, doublesize=8, byteorder=12345678
d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=16
ivtype='long', ivsize=8, nvtype='long double', nvsize=16, Off_t='off_t', lseeksize=8
alignbytes=16, prototype=define
Linker and Libraries:
ld='gcc', ldflags =' -L/usr/local/lib'
libpth=/usr/local/lib /lib /usr/lib
libs=-lnsl -lgdbm -ldb -ldl -lm -lcrypt -lutil -lpthread -lc
perllibs=-lnsl -ldl -lm -lcrypt -lutil -lpthread -lc
libc=/lib/libc-2.3.2.so, so=so, useshrplib=true, libperl=libperl.so
gnulibc_version='2.3.2'
Dynamic Linking:
dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E -Wl,-rpath,/opt/perl/testers/lib/5.8.8/x86_64-linux-thread-multi-ld/CORE'
cccdlflags=' -fPIC', lddlflags='-shared -L/usr/local/lib'
-
FAIL Querylet-0.321 x86_64-linux-thread-multi-ld 2.6.16.14
by imacat