FAIL Data-Domain-0.04 i386-netbsd-thread-multi-64int 3.1

This distribution has been tested as part of the cpan-testers
effort to test as many new uploads to CPAN as possible.  See
http://testers.cpan.org/

Please cc any replies to cpan-testers@perl.org to keep other
test volunteers informed and to prevent any duplicate effort.
	
--

Dear Laurent Dami,
    
This is a computer-generated error report created automatically by
CPANPLUS, version 0.076. Testers personal comments may appear 
at the end of this report.


Thank you for uploading your work to CPAN.  However, it appears that
there were some problems testing your distribution.

TEST RESULTS:

Below is the error stack from stage 'make test':

[MSG] [Thu Mar  8 03:21:20 2007] Trying to get 'http://www.cpan.org/authors/id/D/DA/DAMI/Data-Domain-0.04.tar.gz'
[MSG] [Thu Mar  8 03:21:21 2007] Trying to get 'http://www.cpan.org/authors/id/D/DA/DAMI/CHECKSUMS'
[MSG] [Thu Mar  8 03:21:21 2007] Checksum matches for 'Data-Domain-0.04.tar.gz'
[MSG] [Thu Mar  8 03:21:21 2007] Extracted 'Data-Domain-0.04'
[MSG] [Thu Mar  8 03:21:21 2007] Extracted 'Data-Domain-0.04/Build.pl'
[MSG] [Thu Mar  8 03:21:21 2007] Extracted 'Data-Domain-0.04/Changes'
[MSG] [Thu Mar  8 03:21:21 2007] Extracted 'Data-Domain-0.04/lib'
[MSG] [Thu Mar  8 03:21:21 2007] Extracted 'Data-Domain-0.04/lib/Data'
[MSG] [Thu Mar  8 03:21:21 2007] Extracted 'Data-Domain-0.04/lib/Data/Domain.pm'
[MSG] [Thu Mar  8 03:21:21 2007] Extracted 'Data-Domain-0.04/MANIFEST'
[MSG] [Thu Mar  8 03:21:21 2007] Extracted 'Data-Domain-0.04/META.yml'
[MSG] [Thu Mar  8 03:21:21 2007] Extracted 'Data-Domain-0.04/README'
[MSG] [Thu Mar  8 03:21:21 2007] Extracted 'Data-Domain-0.04/t'
[MSG] [Thu Mar  8 03:21:22 2007] Extracted 'Data-Domain-0.04/t/data-domain.t'
[MSG] [Thu Mar  8 03:21:22 2007] Extracted 'Data-Domain-0.04/t/pod-coverage.t'
[MSG] [Thu Mar  8 03:21:22 2007] Extracted 'Data-Domain-0.04/t/pod.t'
[MSG] [Thu Mar  8 03:21:22 2007] Extracted 'Data::Domain' to '/home/cpan/.cpanplus/5.8.8/build/Data-Domain-0.04'
[ERROR] [Thu Mar  8 03:21:22 2007] Unable to find 'Build.PL' or 'Makefile.PL' for 'Data::Domain'; Will default to 'CPANPLUS::Dist::MM' but might be unable to install!
[MSG] [Thu Mar  8 03:21:22 2007] No 'Makefile.PL' found - attempting to generate one
[MSG] [Thu Mar  8 03:21:23 2007] Checking if your kit is complete...
Looks good
Writing Makefile for Data::Domain

[MSG] [Thu Mar  8 03:21:23 2007] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value'
[MSG] [Thu Mar  8 03:21:26 2007] cp lib/Data/Domain.pm blib/lib/Data/Domain.pm
cp Build.pl blib/lib/Data/Build.pl
Manifying blib/man3/Data::Domain.3

[ERROR] [Thu Mar  8 03:21:27 2007] MAKE TEST failed:  PERL_DL_NONLAZY=1 /home/cpan/perl588/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
t/data-domain.....# Testing Data::Domain 0.04, Perl 5.008008, /home/cpan/perl588/bin/perl
Can't locate Date/Calc.pm in @INC (@INC contains: /home/cpan/.cpanplus/5.8.8/build/Data-Domain-0.04/blib/lib /home/cpan/.cpanplus/5.8.8/build/Data-Domain-0.04/blib/arch /home/cpan/.cpanplus/5.8.8/build/Data-Domain-0.04/blib /home/cpan/perl588/lib/5.8.8/i386-netbsd-thread-multi-64int /home/cpan/perl588/lib/5.8.8/i386-netbsd-thread-multi-64int /home/cpan/perl588/lib/5.8.8 /home/cpan/perl588/lib/site_perl/5.8.8/i386-netbsd-thread-multi-64int /home/cpan/perl588/lib/site_perl/5.8.8/i386-netbsd-thread-multi-64int /home/cpan/perl588/lib/site_perl/5.8.8 /home/cpan/perl588/lib/site_perl/5.8.8/i386-netbsd-thread-multi-64int /home/cpan/perl588/lib/site_perl/5.8.8 /home/cpan/perl588/lib/site_perl . /home/cpan/perl588/lib/5.8.8/i386-netbsd-thread-multi-64int /home/cpan/perl588/lib/5.8.8 /home/cpan/perl588/lib/site_perl/5.8.8/i386-netbsd-thread-multi-64int /home/cpan/perl588/lib/site_perl/5.8.8 /home/cpan/perl588/lib/site_perl .) at /home/cpan/perl588/lib/5.8.8/autouse.pm line 53.
# Looks like you planned 130 tests but only ran 41.
# Looks like your test died just after 41.
dubious
	Test returned status 255 (wstat 65280, 0xff00)
DIED. FAILED tests 42-130
	Failed 89/130 tests, 31.54% okay
t/pod-coverage....skipped
        all skipped: Test::Pod::Coverage 1.04 required for testing POD coverage
t/pod.............skipped
        all skipped: Test::Pod 1.14 required for testing POD
Failed Test     Stat Wstat Total Fail  List of Failed
-------------------------------------------------------------------------------
t/data-domain.t  255 65280   130  178  42-130
2 tests skipped.
Failed 1/3 test scripts. 89/130 subtests failed.
Files=3, Tests=130,  1 wallclock secs ( 0.46 cusr +  0.06 csys =  0.52 CPU)
Failed 1/3 test programs. 89/130 subtests failed.
gmake: *** [test_dynamic] Error 25



MISSING PREREQUISITES:

It was observed that the test suite seem to fail without these modules:

Date::Calc

As such, adding the prerequisite module(s) to 'PREREQ_PM' in your
Makefile.PL should solve this problem.  For example:

WriteMakefile(
    AUTHOR      => 'Laurent Dami (laurent dami *AT* free fr)',
    ... # other information
    PREREQ_PM   => {
	'Date::Calc'	=> '0', # or a minimum working version
    }
);

If you are interested in making a more flexible Makefile.PL that can
probe for missing dependencies and install them, ExtUtils::AutoInstall
at <http://search.cpan.org/dist/ExtUtils-AutoInstall/> may be
worth a look.

Thanks! :-)


******************************** NOTE ********************************
The comments above are created mechanically, possibly without manual
checking by the sender.  As there are many people performing automatic
tests on each upload to CPAN, it is likely that you will receive 
identical messages about the same problem.

If you believe that the message is mistaken, please reply to the first
one with correction and/or additional informations, and do not take
it personally.  We appreciate your patience. :)
**********************************************************************

Additional comments:
 

This report was machine-generated by CPAN::YACSmoke 0.0307.

------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------

Environment variables:

    AUTOMATED_TESTING = 1
    PATH = /home/cpan/bin:/bin:/sbin:/usr/bin:/usr/sbin:/usr/X11R6/bin:/usr/pkg/bin:/usr/pkg/sbin:/usr/games:/usr/local/bin:/usr/local/sbin
    PERL5LIB = :/home/cpan/.cpanplus/5.8.8/build/Data-Domain-0.04/blib/lib:/home/cpan/.cpanplus/5.8.8/build/Data-Domain-0.04/blib/arch:/home/cpan/.cpanplus/5.8.8/build/Data-Domain-0.04/blib
    PERL5_CPANPLUS_IS_RUNNING = 24465
    PERL_MM_USE_DEFAULT = 1
    SHELL = /usr/pkg/bin/bash
    TERM = screen

Perl special variables (and OS-specific diagnostics, for MSWin32):

    Perl: $^X = /home/cpan/perl588/bin/perl
    UID:  $<  = 1002
    EUID: $>  = 1002
    GID:  $(  = 100 100
    EGID: $)  = 100 100


-------------------------------


--

Summary of my perl5 (revision 5 version 8 subversion 8) configuration:
  Platform:
    osname=netbsd, osvers=3.1, archname=i386-netbsd-thread-multi-64int
    uname='netbsd canker.bingosnet.co.uk 3.1 netbsd 3.1 (generic_laptop) #0: tue oct 31 04:32:05 utc 2006 builds@b0.netbsd.org:homebuildsabnetbsd-3-1-releasei386200610302053z-objhomebuildsabnetbsd-3-1-releasesrcsysarchi386compilegeneric_laptop i386 '
    config_args=''
    hint=recommended, useposix=true, d_sigaction=define
    usethreads=define use5005threads=undef useithreads=define usemultiplicity=define
    useperlio=define d_sfio=undef uselargefiles=define usesocks=undef
    use64bitint=define use64bitall=undef uselongdouble=undef
    usemymalloc=n, bincompat5005=undef
  Compiler:
    cc='cc', ccflags ='-fno-strict-aliasing -pipe -I/usr/pkg/include',
    optimize='-O',
    cppflags='-fno-strict-aliasing -pipe -I/usr/pkg/include'
    ccversion='', gccversion='3.3.3 (NetBSD nb3 20040520)', gccosandvers=''
    intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=12345678
    d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=12
    ivtype='long long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8
    alignbytes=4, prototype=define
  Linker and Libraries:
    ld='cc', ldflags =' -Wl,-rpath,/usr/pkg/lib -Wl,-rpath,/usr/local/lib -L/usr/pkg/lib'
    libpth=/usr/pkg/lib /lib /usr/lib
    libs=-lm -lcrypt -lutil -lc -lposix -lpthread
    perllibs=-lm -lcrypt -lutil -lc -lposix -lpthread
    libc=/lib/libc.so, so=so, useshrplib=true, libperl=libperl.so
    gnulibc_version=''
  Dynamic Linking:
    dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E  -Wl,-R/home/cpan/perl588/lib/5.8.8/i386-netbsd-thread-multi-64int/CORE'
    cccdlflags='-DPIC -fPIC ', lddlflags='--whole-archive -shared  -L/usr/pkg/lib'

• FAIL Data-Domain-0.04 i386-netbsd-thread-multi-64int 3.1 by chris