FAIL Data-Domain-0.04 i686-linux-thread-multi-64int-ld 2.6.16.38

This distribution has been tested as part of the cpan-testers
effort to test as many new uploads to CPAN as possible.  See
http://testers.cpan.org/

Please cc any replies to cpan-testers@perl.org to keep other
test volunteers informed and to prevent any duplicate effort.
	
--

Dear DAMI,
    
This is a computer-generated error report created automatically by
CPANPLUS, version 0.076. Testers personal comments may appear 
at the end of this report.


Thank you for uploading your work to CPAN.  However, it appears that
there were some problems testing your distribution.

TEST RESULTS:

Below is the error stack from stage 'make test':

[MSG] [Mon Mar 12 20:34:39 2007] Trying to get 'http://www.cpan.org/authors/id/D/DA/DAMI/Data-Domain-0.04.tar.gz'
[MSG] [Mon Mar 12 20:34:42 2007] Trying to get 'http://www.cpan.org/authors/id/D/DA/DAMI/CHECKSUMS'
[MSG] [Mon Mar 12 20:34:43 2007] Checksum matches for 'Data-Domain-0.04.tar.gz'
[MSG] [Mon Mar 12 20:34:43 2007] Extracted 'Data-Domain-0.04/'
[MSG] [Mon Mar 12 20:34:43 2007] Extracted 'Data-Domain-0.04/Build.pl'
[MSG] [Mon Mar 12 20:34:43 2007] Extracted 'Data-Domain-0.04/Changes'
[MSG] [Mon Mar 12 20:34:43 2007] Extracted 'Data-Domain-0.04/lib/'
[MSG] [Mon Mar 12 20:34:43 2007] Extracted 'Data-Domain-0.04/lib/Data/'
[MSG] [Mon Mar 12 20:34:43 2007] Extracted 'Data-Domain-0.04/lib/Data/Domain.pm'
[MSG] [Mon Mar 12 20:34:43 2007] Extracted 'Data-Domain-0.04/MANIFEST'
[MSG] [Mon Mar 12 20:34:43 2007] Extracted 'Data-Domain-0.04/META.yml'
[MSG] [Mon Mar 12 20:34:43 2007] Extracted 'Data-Domain-0.04/README'
[MSG] [Mon Mar 12 20:34:43 2007] Extracted 'Data-Domain-0.04/t/'
[MSG] [Mon Mar 12 20:34:43 2007] Extracted 'Data-Domain-0.04/t/data-domain.t'
[MSG] [Mon Mar 12 20:34:43 2007] Extracted 'Data-Domain-0.04/t/pod-coverage.t'
[MSG] [Mon Mar 12 20:34:43 2007] Extracted 'Data-Domain-0.04/t/pod.t'
[MSG] [Mon Mar 12 20:34:43 2007] Extracted 'Data::Domain' to '/home/cpan/.cpanplus/5.8.8/build/Data-Domain-0.04'
[ERROR] [Mon Mar 12 20:34:43 2007] Unable to find 'Build.PL' or 'Makefile.PL' for 'Data::Domain'; Will default to 'CPANPLUS::Dist::MM' but might be unable to install!
[MSG] [Mon Mar 12 20:34:43 2007] No 'Makefile.PL' found - attempting to generate one
[MSG] [Mon Mar 12 20:34:43 2007] Checking if your kit is complete...
Looks good
Writing Makefile for Data::Domain

[MSG] [Mon Mar 12 20:34:43 2007] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value'
[MSG] [Mon Mar 12 20:34:44 2007] cp lib/Data/Domain.pm blib/lib/Data/Domain.pm
cp Build.pl blib/lib/Data/Build.pl
Manifying blib/man3/Data::Domain.3

[ERROR] [Mon Mar 12 20:34:45 2007] MAKE TEST failed: Illegal seek PERL_DL_NONLAZY=1 /home/cpan/perl588/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
t/data-domain.....# Testing Data::Domain 0.04, Perl 5.008008, /home/cpan/perl588/bin/perl
Can't locate Date/Calc.pm in @INC (@INC contains: /home/cpan/.cpanplus/5.8.8/build/Data-Domain-0.04/blib/lib /home/cpan/.cpanplus/5.8.8/build/Data-Domain-0.04/blib/arch /home/cpan/.cpanplus/5.8.8/build/Data-Domain-0.04/blib /home/cpan/perl588/lib/5.8.8/i686-linux-thread-multi-64int-ld /home/cpan/perl588/lib/5.8.8/i686-linux-thread-multi-64int-ld /home/cpan/perl588/lib/5.8.8 /home/cpan/perl588/lib/site_perl/5.8.8/i686-linux-thread-multi-64int-ld /home/cpan/perl588/lib/site_perl/5.8.8/i686-linux-thread-multi-64int-ld /home/cpan/perl588/lib/site_perl/5.8.8 /home/cpan/perl588/lib/site_perl/5.8.8/i686-linux-thread-multi-64int-ld /home/cpan/perl588/lib/site_perl/5.8.8 /home/cpan/perl588/lib/site_perl . /home/cpan/perl588/lib/5.8.8/i686-linux-thread-multi-64int-ld /home/cpan/perl588/lib/5.8.8 /home/cpan/perl588/lib/site_perl/5.8.8/i686-linux-thread-multi-64int-ld /home/cpan/perl588/lib/site_perl/5.8.8 /home/cpan/perl588/lib/site_perl .) at /home/cpan/perl588/lib/5.8.8/autouse.pm line 53.
# Looks like you planned 130 tests but only ran 41.
# Looks like your test died just after 41.
dubious
	Test returned status 255 (wstat 65280, 0xff00)
DIED. FAILED tests 42-130
	Failed 89/130 tests, 31.54% okay
t/pod-coverage....skipped
        all skipped: Test::Pod::Coverage 1.04 required for testing POD coverage
t/pod.............skipped
        all skipped: Test::Pod 1.14 required for testing POD
Failed Test     Stat Wstat Total Fail  List of Failed
-------------------------------------------------------------------------------
t/data-domain.t  255 65280   130  178  42-130
2 tests skipped.
Failed 1/3 test scripts. 89/130 subtests failed.
Files=3, Tests=130,  0 wallclock secs ( 0.24 cusr +  0.09 csys =  0.33 CPU)
Failed 1/3 test programs. 89/130 subtests failed.
make: *** [test_dynamic] Error 255



MISSING PREREQUISITES:

It was observed that the test suite seem to fail without these modules:

Date::Calc

As such, adding the prerequisite module(s) to 'PREREQ_PM' in your
Makefile.PL should solve this problem.  For example:

WriteMakefile(
    AUTHOR      => 'DAMI (cpanplus-info@lists.sf.net)',
    ... # other information
    PREREQ_PM   => {
	'Date::Calc'	=> '0', # or a minimum working version
    }
);

If you are interested in making a more flexible Makefile.PL that can
probe for missing dependencies and install them, ExtUtils::AutoInstall
at <http://search.cpan.org/dist/ExtUtils-AutoInstall/> may be
worth a look.

Thanks! :-)


******************************** NOTE ********************************
The comments above are created mechanically, possibly without manual
checking by the sender.  As there are many people performing automatic
tests on each upload to CPAN, it is likely that you will receive 
identical messages about the same problem.

If you believe that the message is mistaken, please reply to the first
one with correction and/or additional informations, and do not take
it personally.  We appreciate your patience. :)
**********************************************************************

Additional comments:
 

This report was machine-generated by CPAN::YACSmoke 0.0307.

------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------

Environment variables:

    AUTOMATED_TESTING = 1
    LANG = en_GB.UTF-8
    PATH = /usr/local/bin:/bin:/usr/bin:/usr/X11/bin
    PERL5LIB = :/home/cpan/.cpanplus/5.8.8/build/Data-Domain-0.04/blib/lib:/home/cpan/.cpanplus/5.8.8/build/Data-Domain-0.04/blib/arch:/home/cpan/.cpanplus/5.8.8/build/Data-Domain-0.04/blib
    PERL5_CPANPLUS_IS_RUNNING = 18821
    PERL_MM_USE_DEFAULT = 1
    SHELL = /bin/bash
    TERM = linux

Perl special variables (and OS-specific diagnostics, for MSWin32):

    Perl: $^X = /home/cpan/perl588/bin/perl
    UID:  $<  = 1000
    EUID: $>  = 1000
    GID:  $(  = 100 100
    EGID: $)  = 100 100


-------------------------------


--

Summary of my perl5 (revision 5 version 8 subversion 8) configuration:
  Platform:
    osname=linux, osvers=2.6.16.38, archname=i686-linux-thread-multi-64int-ld
    uname='linux scratch 2.6.16.38 #1 preempt thu feb 22 16:04:10 gmt 2007 i686 athlon-4 i386 gnulinux '
    config_args=''
    hint=recommended, useposix=true, d_sigaction=define
    usethreads=define use5005threads=undef useithreads=define usemultiplicity=define
    useperlio=define d_sfio=undef uselargefiles=define usesocks=undef
    use64bitint=define use64bitall=undef uselongdouble=define
    usemymalloc=n, bincompat5005=undef
  Compiler:
    cc='cc', ccflags ='-D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS -fno-strict-aliasing -pipe -Wdeclaration-after-statement -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64',
    optimize='-O2',
    cppflags='-D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS -fno-strict-aliasing -pipe -Wdeclaration-after-statement'
    ccversion='', gccversion='4.0.3', gccosandvers=''
    intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=12345678
    d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=12
    ivtype='long long', ivsize=8, nvtype='long double', nvsize=12, Off_t='off_t', lseeksize=8
    alignbytes=4, prototype=define
  Linker and Libraries:
    ld='cc', ldflags =''
    libpth=/lib /usr/lib /usr/local/lib
    libs=-lnsl -lgdbm -ldb -ldl -lm -lcrypt -lutil -lpthread -lc
    perllibs=-lnsl -ldl -lm -lcrypt -lutil -lpthread -lc
    libc=/lib/libc-2.3.6.so, so=so, useshrplib=true, libperl=libperl.so
    gnulibc_version='2.3.6'
  Dynamic Linking:
    dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E -Wl,-rpath,/home/cpan/perl588/lib/5.8.8/i686-linux-thread-multi-64int-ld/CORE'
    cccdlflags='-fpic', lddlflags='-shared'

• FAIL Data-Domain-0.04 i686-linux-thread-multi-64int-ld 2.6.16.38 by chris