FAIL Acme-Dahut-Call-0.01 i686-linux-thread-multi-64int-ld 2.6.16.38

This distribution has been tested as part of the cpan-testers
effort to test as many new uploads to CPAN as possible.  See
http://testers.cpan.org/

Please cc any replies to cpan-testers@perl.org to keep other
test volunteers informed and to prevent any duplicate effort.
	
--

Dear PERIGRIN,
    
This is a computer-generated error report created automatically by
CPANPLUS, version 0.78. Testers personal comments may appear 
at the end of this report.


Thank you for uploading your work to CPAN.  However, it appears that
there were some problems testing your distribution.

TEST RESULTS:

Below is the error stack from stage 'make test':

[MSG] [Thu May 17 16:14:05 2007] Trying to get 'http://www.cpan.org/authors/id/P/PE/PERIGRIN/Acme-Dahut-Call-0.01.tar.gz'
[MSG] [Thu May 17 16:14:06 2007] Trying to get 'http://www.cpan.org/authors/id/P/PE/PERIGRIN/CHECKSUMS'
[MSG] [Thu May 17 16:14:06 2007] Checksum matches for 'Acme-Dahut-Call-0.01.tar.gz'
[MSG] [Thu May 17 16:14:07 2007] Extracted 'Acme-Dahut-Call-0.01/'
[MSG] [Thu May 17 16:14:07 2007] Extracted 'Acme-Dahut-Call-0.01/.cvsignore'
[MSG] [Thu May 17 16:14:07 2007] Extracted 'Acme-Dahut-Call-0.01/Build.PL'
[MSG] [Thu May 17 16:14:07 2007] Extracted 'Acme-Dahut-Call-0.01/Changes'
[MSG] [Thu May 17 16:14:07 2007] Extracted 'Acme-Dahut-Call-0.01/inc/'
[MSG] [Thu May 17 16:14:07 2007] Extracted 'Acme-Dahut-Call-0.01/inc/Module/'
[MSG] [Thu May 17 16:14:07 2007] Extracted 'Acme-Dahut-Call-0.01/inc/Module/Install/'
[MSG] [Thu May 17 16:14:07 2007] Extracted 'Acme-Dahut-Call-0.01/inc/Module/Install/Base.pm'
[MSG] [Thu May 17 16:14:07 2007] Extracted 'Acme-Dahut-Call-0.01/inc/Module/Install/Makefile.pm'
[MSG] [Thu May 17 16:14:07 2007] Extracted 'Acme-Dahut-Call-0.01/inc/Module/Install/MakeMaker.pm'
[MSG] [Thu May 17 16:14:07 2007] Extracted 'Acme-Dahut-Call-0.01/inc/Module/Install/Metadata.pm'
[MSG] [Thu May 17 16:14:07 2007] Extracted 'Acme-Dahut-Call-0.01/inc/Module/Install.pm'
[MSG] [Thu May 17 16:14:07 2007] Extracted 'Acme-Dahut-Call-0.01/lib/'
[MSG] [Thu May 17 16:14:07 2007] Extracted 'Acme-Dahut-Call-0.01/lib/Acme/'
[MSG] [Thu May 17 16:14:07 2007] Extracted 'Acme-Dahut-Call-0.01/lib/Acme/Dahut/'
[MSG] [Thu May 17 16:14:07 2007] Extracted 'Acme-Dahut-Call-0.01/lib/Acme/Dahut/Call/'
[MSG] [Thu May 17 16:14:07 2007] Extracted 'Acme-Dahut-Call-0.01/lib/Acme/Dahut/Call/Identifier.pm'
[MSG] [Thu May 17 16:14:07 2007] Extracted 'Acme-Dahut-Call-0.01/lib/Acme/Dahut/Call.pm'
[MSG] [Thu May 17 16:14:07 2007] Extracted 'Acme-Dahut-Call-0.01/Makefile.PL'
[MSG] [Thu May 17 16:14:07 2007] Extracted 'Acme-Dahut-Call-0.01/MANIFEST'
[MSG] [Thu May 17 16:14:07 2007] Extracted 'Acme-Dahut-Call-0.01/META.yml'
[MSG] [Thu May 17 16:14:07 2007] Extracted 'Acme-Dahut-Call-0.01/README'
[MSG] [Thu May 17 16:14:07 2007] Extracted 'Acme-Dahut-Call-0.01/t/'
[MSG] [Thu May 17 16:14:07 2007] Extracted 'Acme-Dahut-Call-0.01/t/00.load.t'
[MSG] [Thu May 17 16:14:07 2007] Extracted 'Acme-Dahut-Call-0.01/t/kwalitee.t'
[MSG] [Thu May 17 16:14:07 2007] Extracted 'Acme-Dahut-Call-0.01/t/perlcritic.t'
[MSG] [Thu May 17 16:14:07 2007] Extracted 'Acme-Dahut-Call-0.01/t/pod-coverage.t'
[MSG] [Thu May 17 16:14:07 2007] Extracted 'Acme-Dahut-Call-0.01/t/pod.t'
[MSG] [Thu May 17 16:14:07 2007] Extracted 'Acme::Dahut::Call' to '/home/cpan/.cpanplus/5.8.8/build/Acme-Dahut-Call-0.01'
[MSG] [Thu May 17 16:14:08 2007] Checking if your kit is complete...
Looks good
Writing Makefile for Acme::Dahut::Call

[MSG] [Thu May 17 16:14:08 2007] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value'
[MSG] [Thu May 17 16:14:10 2007] cp lib/Acme/Dahut/Call/Identifier.pm blib/lib/Acme/Dahut/Call/Identifier.pm
cp lib/Acme/Dahut/Call.pm blib/lib/Acme/Dahut/Call.pm
Manifying blib/man3/Acme::Dahut::Call::Identifier.3
Manifying blib/man3/Acme::Dahut::Call.3

[ERROR] [Thu May 17 16:14:11 2007] MAKE TEST failed: Illegal seek PERL_DL_NONLAZY=1 /home/cpan/perl588/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'inc', 'blib/lib', 'blib/arch')" t/*.t
t/00.load.........
#   Failed test 'use Acme::Dahut::Call;'
#   at t/00.load.t line 4.
#     Tried to use 'Acme::Dahut::Call'.
#     Error:  Can't locate Moose.pm in @INC (@INC contains: /home/cpan/.cpanplus/5.8.8/build/Acme-Dahut-Call-0.01/inc /home/cpan/.cpanplus/5.8.8/build/Acme-Dahut-Call-0.01/blib/lib /home/cpan/.cpanplus/5.8.8/build/Acme-Dahut-Call-0.01/blib/arch /home/cpan/.cpanplus/5.8.8/build/Acme-Dahut-Call-0.01/blib /home/cpan/perl588/lib/5.8.8/i686-linux-thread-multi-64int-ld /home/cpan/perl588/lib/5.8.8/i686-linux-thread-multi-64int-ld /home/cpan/perl588/lib/5.8.8 /home/cpan/perl588/lib/site_perl/5.8.8/i686-linux-thread-multi-64int-ld /home/cpan/perl588/lib/site_perl/5.8.8/i686-linux-thread-multi-64int-ld /home/cpan/perl588/lib/site_perl/5.8.8 /home/cpan/perl588/lib/site_perl/5.8.8/i686-linux-thread-multi-64int-ld /home/cpan/perl588/lib/site_perl/5.8.8 /home/cpan/perl588/lib/site_perl . /home/cpan/perl588/lib/5.8.8/i686-linux-thread-multi-64int-ld /home/cpan/perl588/lib/5.8.8 /home/cpan/perl588/lib/site_perl/5.8.8/i686-linux-thread-multi-64int-ld /home/cpan/perl588/lib/site_perl/5.8.8 /home/cpan/perl588/lib/site_perl .) at /home/cpan/.cpanplus/5.8.8/build/Acme-Dahut-Call-0.01/blib/lib/Acme/Dahut/Call.pm line 3.
# BEGIN failed--compilation aborted at t/00.load.t line 4.
# Compilation failed in require at (eval 3) line 2.
# BEGIN failed--compilation aborted at (eval 3) line 2.
Use of uninitialized value in concatenation (.) or string at t/00.load.t line 7.
# Testing Acme::Dahut::Call 
# Looks like you failed 1 test of 1.
dubious
	Test returned status 1 (wstat 256, 0x100)
DIED. FAILED test 1
	Failed 1/1 tests, 0.00% okay
t/kwalitee........skipped
        all skipped: Test::Kwalitee not installed; skipping
t/perlcritic......Can't locate Test/Perl/Critic.pm in @INC (@INC contains: /home/cpan/.cpanplus/5.8.8/build/Acme-Dahut-Call-0.01/inc /home/cpan/.cpanplus/5.8.8/build/Acme-Dahut-Call-0.01/blib/lib /home/cpan/.cpanplus/5.8.8/build/Acme-Dahut-Call-0.01/blib/arch /home/cpan/.cpanplus/5.8.8/build/Acme-Dahut-Call-0.01/blib /home/cpan/perl588/lib/5.8.8/i686-linux-thread-multi-64int-ld /home/cpan/perl588/lib/5.8.8/i686-linux-thread-multi-64int-ld /home/cpan/perl588/lib/5.8.8 /home/cpan/perl588/lib/site_perl/5.8.8/i686-linux-thread-multi-64int-ld /home/cpan/perl588/lib/site_perl/5.8.8/i686-linux-thread-multi-64int-ld /home/cpan/perl588/lib/site_perl/5.8.8 /home/cpan/perl588/lib/site_perl/5.8.8/i686-linux-thread-multi-64int-ld /home/cpan/perl588/lib/site_perl/5.8.8 /home/cpan/perl588/lib/site_perl . /home/cpan/perl588/lib/5.8.8/i686-linux-thread-multi-64int-ld /home/cpan/perl588/lib/5.8.8 /home/cpan/perl588/lib/site_perl/5.8.8/i686-linux-thread-multi-64int-ld /home/cpan/perl588/lib/site_perl/5.8.8 /home/cpan/perl588/lib/site_perl .) at t/perlcritic.t line 3.
dubious
	Test returned status 2 (wstat 512, 0x200)
t/pod-coverage....skipped
        all skipped: Test::Pod::Coverage 1.04 required for testing POD coverage
t/pod.............skipped
        all skipped: Test::Pod 1.14 required for testing POD
Failed Test    Stat Wstat Total Fail  List of Failed
-------------------------------------------------------------------------------
t/00.load.t       1   256     1    1  1
t/perlcritic.t    2   512    ??   ??  ??
3 tests skipped.
Failed 2/5 test scripts. 1/1 subtests failed.
Files=5, Tests=1,  1 wallclock secs ( 0.35 cusr +  0.16 csys =  0.51 CPU)
Failed 2/5 test programs. 1/1 subtests failed.
make: *** [test_dynamic] Error 255



MISSING PREREQUISITES:

It was observed that the test suite seem to fail without these modules:

Moose
Test::Perl::Critic

As such, adding the prerequisite module(s) to 'PREREQ_PM' in your
Makefile.PL should solve this problem.  For example:

WriteMakefile(
    AUTHOR      => 'PERIGRIN (cpanplus-info@lists.sf.net)',
    ... # other information
    PREREQ_PM   => {
	'Moose'	=> '0', # or a minimum working version
	'Test::Perl::Critic'	=> '0', # or a minimum working version
    }
);

If you are interested in making a more flexible Makefile.PL that can
probe for missing dependencies and install them, ExtUtils::AutoInstall
at <http://search.cpan.org/dist/ExtUtils-AutoInstall/> may be
worth a look.

Thanks! :-)

PREREQUISITES:

Here is a list of prerequisites you specified and versions we 
managed to load:
                                
	  Test::More                         0.70        0
	  version                          0.7203        0

******************************** NOTE ********************************
The comments above are created mechanically, possibly without manual
checking by the sender.  As there are many people performing automatic
tests on each upload to CPAN, it is likely that you will receive 
identical messages about the same problem.

If you believe that the message is mistaken, please reply to the first
one with correction and/or additional informations, and do not take
it personally.  We appreciate your patience. :)
**********************************************************************

Additional comments:
 

This report was machine-generated by CPAN::YACSmoke 0.0307.

------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------

Environment variables:

    AUTOMATED_TESTING = 1
    LANG = en_GB.UTF-8
    PATH = /usr/local/bin:/bin:/usr/bin:/usr/X11/bin
    PERL5LIB = :/home/cpan/.cpanplus/5.8.8/build/Acme-Dahut-Call-0.01/blib/lib:/home/cpan/.cpanplus/5.8.8/build/Acme-Dahut-Call-0.01/blib/arch:/home/cpan/.cpanplus/5.8.8/build/Acme-Dahut-Call-0.01/blib
    PERL5_CPANPLUS_IS_RUNNING = 854
    PERL5_CPANPLUS_IS_VERSION = 0.78
    PERL_MM_USE_DEFAULT = 1
    SHELL = /bin/bash
    TERM = screen.linux

Perl special variables (and OS-specific diagnostics, for MSWin32):

    Perl: $^X = /home/cpan/perl588/bin/perl
    UID:  $<  = 1000
    EUID: $>  = 1000
    GID:  $(  = 100 100
    EGID: $)  = 100 100


-------------------------------


--

Summary of my perl5 (revision 5 version 8 subversion 8) configuration:
  Platform:
    osname=linux, osvers=2.6.16.38, archname=i686-linux-thread-multi-64int-ld
    uname='linux scratch 2.6.16.38 #1 preempt thu feb 22 16:04:10 gmt 2007 i686 athlon-4 i386 gnulinux '
    config_args=''
    hint=recommended, useposix=true, d_sigaction=define
    usethreads=define use5005threads=undef useithreads=define usemultiplicity=define
    useperlio=define d_sfio=undef uselargefiles=define usesocks=undef
    use64bitint=define use64bitall=undef uselongdouble=define
    usemymalloc=n, bincompat5005=undef
  Compiler:
    cc='cc', ccflags ='-D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS -fno-strict-aliasing -pipe -Wdeclaration-after-statement -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64',
    optimize='-O2',
    cppflags='-D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS -fno-strict-aliasing -pipe -Wdeclaration-after-statement'
    ccversion='', gccversion='4.0.3', gccosandvers=''
    intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=12345678
    d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=12
    ivtype='long long', ivsize=8, nvtype='long double', nvsize=12, Off_t='off_t', lseeksize=8
    alignbytes=4, prototype=define
  Linker and Libraries:
    ld='cc', ldflags =''
    libpth=/lib /usr/lib /usr/local/lib
    libs=-lnsl -lgdbm -ldb -ldl -lm -lcrypt -lutil -lpthread -lc
    perllibs=-lnsl -ldl -lm -lcrypt -lutil -lpthread -lc
    libc=/lib/libc-2.3.6.so, so=so, useshrplib=true, libperl=libperl.so
    gnulibc_version='2.3.6'
  Dynamic Linking:
    dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E -Wl,-rpath,/home/cpan/perl588/lib/5.8.8/i686-linux-thread-multi-64int-ld/CORE'
    cccdlflags='-fpic', lddlflags='-shared'

• FAIL Acme-Dahut-Call-0.01 i686-linux-thread-multi-64int-ld 2.6.16.38 by chris