Front page | perl.cpan.testers |
Postings from June 2007
FAIL SOAP-WSDL-1.22 i686-linux-thread-multi-64int-ld 2.6.16.38
From:
chris
Date:
June 6, 2007 14:28
Subject:
FAIL SOAP-WSDL-1.22 i686-linux-thread-multi-64int-ld 2.6.16.38
This distribution has been tested as part of the cpan-testers
effort to test as many new uploads to CPAN as possible. See
http://testers.cpan.org/
Please cc any replies to cpan-testers@perl.org to keep other
test volunteers informed and to prevent any duplicate effort.
--
Dear MKUTTER,
This is a computer-generated error report created automatically by
CPANPLUS, version 0.78. Testers personal comments may appear
at the end of this report.
Thank you for uploading your work to CPAN. However, it appears that
there were some problems testing your distribution.
TEST RESULTS:
Below is the error stack from stage 'make test':
[MSG] [Wed Jun 6 18:43:28 2007] Trying to get 'http://www.cpan.org/authors/id/M/MK/MKUTTER/SOAP-WSDL-1.22.tar.gz'
[MSG] [Wed Jun 6 18:43:29 2007] Trying to get 'http://www.cpan.org/authors/id/M/MK/MKUTTER/CHECKSUMS'
[MSG] [Wed Jun 6 18:43:29 2007] Checksum matches for 'SOAP-WSDL-1.22.tar.gz'
[MSG] [Wed Jun 6 18:43:29 2007] Extracted 'SOAP-WSDL-1.22'
[MSG] [Wed Jun 6 18:43:29 2007] Extracted 'SOAP-WSDL-1.22/Build.PL'
[MSG] [Wed Jun 6 18:43:29 2007] Extracted 'SOAP-WSDL-1.22/CHANGES'
[MSG] [Wed Jun 6 18:43:29 2007] Extracted 'SOAP-WSDL-1.22/HACKING'
[MSG] [Wed Jun 6 18:43:29 2007] Extracted 'SOAP-WSDL-1.22/MANIFEST'
[MSG] [Wed Jun 6 18:43:29 2007] Extracted 'SOAP-WSDL-1.22/META.yml'
[MSG] [Wed Jun 6 18:43:29 2007] Extracted 'SOAP-WSDL-1.22/README'
[MSG] [Wed Jun 6 18:43:29 2007] Extracted 'SOAP-WSDL-1.22/lib'
[MSG] [Wed Jun 6 18:43:29 2007] Extracted 'SOAP-WSDL-1.22/lib/SOAP'
[MSG] [Wed Jun 6 18:43:29 2007] Extracted 'SOAP-WSDL-1.22/lib/SOAP/WSDL.pm'
[MSG] [Wed Jun 6 18:43:29 2007] Extracted 'SOAP-WSDL-1.22/t'
[MSG] [Wed Jun 6 18:43:29 2007] Extracted 'SOAP-WSDL-1.22/t/1_performance.t'
[MSG] [Wed Jun 6 18:43:29 2007] Extracted 'SOAP-WSDL-1.22/t/2_helloworld.NET.t'
[MSG] [Wed Jun 6 18:43:29 2007] Extracted 'SOAP-WSDL-1.22/t/3_various.t'
[MSG] [Wed Jun 6 18:43:29 2007] Extracted 'SOAP-WSDL-1.22/t/97_pod.t'
[MSG] [Wed Jun 6 18:43:29 2007] Extracted 'SOAP-WSDL-1.22/t/98_pod_coverage.t'
[MSG] [Wed Jun 6 18:43:29 2007] Extracted 'SOAP-WSDL-1.22/t/acceptance'
[MSG] [Wed Jun 6 18:43:29 2007] Extracted 'SOAP-WSDL-1.22/t/acceptance/helloworld.asmx.xml'
[MSG] [Wed Jun 6 18:43:29 2007] Extracted 'SOAP-WSDL-1.22/t/acceptance/helloworld.xml'
[MSG] [Wed Jun 6 18:43:29 2007] Extracted 'SOAP-WSDL-1.22/t/acceptance/test.wsdl.xml'
[MSG] [Wed Jun 6 18:43:29 2007] Extracted 'SOAP::WSDL' to '/home/cpan/.cpanplus/5.8.8/build/SOAP-WSDL-1.22'
[ERROR] [Wed Jun 6 18:43:29 2007] This module requires 'Module::Build' and 'CPANPLUS::Dist::Build' to be installed, but you don't have it! Will fall back to 'CPANPLUS::Dist::MM', but might not be able to install!
[MSG] [Wed Jun 6 18:43:30 2007] No 'Makefile.PL' found - attempting to generate one
[MSG] [Wed Jun 6 18:43:30 2007] Checking if your kit is complete...
Looks good
Writing Makefile for SOAP::WSDL
[MSG] [Wed Jun 6 18:43:30 2007] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value'
[MSG] [Wed Jun 6 18:43:32 2007] cp lib/SOAP/WSDL.pm blib/lib/SOAP/WSDL.pm
Manifying blib/man3/SOAP::WSDL.3
[ERROR] [Wed Jun 6 18:43:33 2007] MAKE TEST failed: Illegal seek PERL_DL_NONLAZY=1 /home/cpan/perl588/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
t/1_performance.......Can't locate SOAP/Lite.pm in @INC (@INC contains: ../lib /home/cpan/.cpanplus/5.8.8/build/SOAP-WSDL-1.22/blib/lib /home/cpan/.cpanplus/5.8.8/build/SOAP-WSDL-1.22/blib/arch /home/cpan/.cpanplus/5.8.8/build/SOAP-WSDL-1.22/blib /home/cpan/perl588/lib/5.8.8/i686-linux-thread-multi-64int-ld /home/cpan/perl588/lib/5.8.8 /home/cpan/perl588/lib/site_perl/5.8.8/i686-linux-thread-multi-64int-ld /home/cpan/perl588/lib/site_perl/5.8.8 /home/cpan/perl588/lib/site_perl .) at /home/cpan/.cpanplus/5.8.8/build/SOAP-WSDL-1.22/blib/lib/SOAP/WSDL.pm line 4.
BEGIN failed--compilation aborted at /home/cpan/.cpanplus/5.8.8/build/SOAP-WSDL-1.22/blib/lib/SOAP/WSDL.pm line 4.
Compilation failed in require at t/1_performance.t line 10.
BEGIN failed--compilation aborted at t/1_performance.t line 10.
dubious
Test returned status 2 (wstat 512, 0x200)
t/2_helloworld.NET....Can't locate SOAP/Lite.pm in @INC (@INC contains: ../lib /home/cpan/.cpanplus/5.8.8/build/SOAP-WSDL-1.22/blib/lib /home/cpan/.cpanplus/5.8.8/build/SOAP-WSDL-1.22/blib/arch /home/cpan/.cpanplus/5.8.8/build/SOAP-WSDL-1.22/blib /home/cpan/perl588/lib/5.8.8/i686-linux-thread-multi-64int-ld /home/cpan/perl588/lib/5.8.8 /home/cpan/perl588/lib/site_perl/5.8.8/i686-linux-thread-multi-64int-ld /home/cpan/perl588/lib/site_perl/5.8.8 /home/cpan/perl588/lib/site_perl .) at /home/cpan/.cpanplus/5.8.8/build/SOAP-WSDL-1.22/blib/lib/SOAP/WSDL.pm line 4.
BEGIN failed--compilation aborted at /home/cpan/.cpanplus/5.8.8/build/SOAP-WSDL-1.22/blib/lib/SOAP/WSDL.pm line 4.
Compilation failed in require at t/2_helloworld.NET.t line 20.
BEGIN failed--compilation aborted at t/2_helloworld.NET.t line 20 (#1)
(F) You said to do (or require, or use) a file that couldn't be
found. Perl looks for the file in all the locations mentioned in @INC,
unless the file name included the full path to the file. Perhaps you
need to set the PERL5LIB or PERL5OPT environment variable to say where
the extra library is, or maybe the script needs to add the library name
to @INC. Or maybe you just misspelled the name of the file. See
perlfunc/require and lib.
Uncaught exception from user code:
Can't locate SOAP/Lite.pm in @INC (@INC contains: ../lib /home/cpan/.cpanplus/5.8.8/build/SOAP-WSDL-1.22/blib/lib /home/cpan/.cpanplus/5.8.8/build/SOAP-WSDL-1.22/blib/arch /home/cpan/.cpanplus/5.8.8/build/SOAP-WSDL-1.22/blib /home/cpan/perl588/lib/5.8.8/i686-linux-thread-multi-64int-ld /home/cpan/perl588/lib/5.8.8 /home/cpan/perl588/lib/site_perl/5.8.8/i686-linux-thread-multi-64int-ld /home/cpan/perl588/lib/site_perl/5.8.8 /home/cpan/perl588/lib/site_perl .) at /home/cpan/.cpanplus/5.8.8/build/SOAP-WSDL-1.22/blib/lib/SOAP/WSDL.pm line 4.
BEGIN failed--compilation aborted at /home/cpan/.cpanplus/5.8.8/build/SOAP-WSDL-1.22/blib/lib/SOAP/WSDL.pm line 4.
Compilation failed in require at t/2_helloworld.NET.t line 20.
BEGIN failed--compilation aborted at t/2_helloworld.NET.t line 20.
at t/2_helloworld.NET.t line 20
dubious
Test returned status 2 (wstat 512, 0x200)
t/3_various...........Can't locate SOAP/Lite.pm in @INC (@INC contains: ../lib /home/cpan/.cpanplus/5.8.8/build/SOAP-WSDL-1.22/blib/lib /home/cpan/.cpanplus/5.8.8/build/SOAP-WSDL-1.22/blib/arch /home/cpan/.cpanplus/5.8.8/build/SOAP-WSDL-1.22/blib /home/cpan/perl588/lib/5.8.8/i686-linux-thread-multi-64int-ld /home/cpan/perl588/lib/5.8.8 /home/cpan/perl588/lib/site_perl/5.8.8/i686-linux-thread-multi-64int-ld /home/cpan/perl588/lib/site_perl/5.8.8 /home/cpan/perl588/lib/site_perl .) at /home/cpan/.cpanplus/5.8.8/build/SOAP-WSDL-1.22/blib/lib/SOAP/WSDL.pm line 4.
BEGIN failed--compilation aborted at /home/cpan/.cpanplus/5.8.8/build/SOAP-WSDL-1.22/blib/lib/SOAP/WSDL.pm line 4.
Compilation failed in require at t/3_various.t line 9.
BEGIN failed--compilation aborted at t/3_various.t line 9.
dubious
Test returned status 2 (wstat 512, 0x200)
t/97_pod..............skipped
all skipped: Test::Pod 1.00 required for testing POD
t/98_pod_coverage.....Can't locate Test/Pod/Coverage.pm in @INC (@INC contains: /home/cpan/.cpanplus/5.8.8/build/SOAP-WSDL-1.22/blib/lib /home/cpan/.cpanplus/5.8.8/build/SOAP-WSDL-1.22/blib/arch /home/cpan/.cpanplus/5.8.8/build/SOAP-WSDL-1.22/blib /home/cpan/perl588/lib/5.8.8/i686-linux-thread-multi-64int-ld /home/cpan/perl588/lib/5.8.8/i686-linux-thread-multi-64int-ld /home/cpan/perl588/lib/5.8.8 /home/cpan/perl588/lib/site_perl/5.8.8/i686-linux-thread-multi-64int-ld /home/cpan/perl588/lib/site_perl/5.8.8/i686-linux-thread-multi-64int-ld /home/cpan/perl588/lib/site_perl/5.8.8 /home/cpan/perl588/lib/site_perl/5.8.8/i686-linux-thread-multi-64int-ld /home/cpan/perl588/lib/site_perl/5.8.8 /home/cpan/perl588/lib/site_perl . /home/cpan/perl588/lib/5.8.8/i686-linux-thread-multi-64int-ld /home/cpan/perl588/lib/5.8.8 /home/cpan/perl588/lib/site_perl/5.8.8/i686-linux-thread-multi-64int-ld /home/cpan/perl588/lib/site_perl/5.8.8 /home/cpan/perl588/lib/site_perl .) at t/98_pod_coverage.t line 2.
BEGIN failed--compilation aborted at t/98_pod_coverage.t line 2.
# Looks like your test died before it could output anything.
dubious
Test returned status 255 (wstat 65280, 0xff00)
FAILED--5 test scripts could be run, alas--no output ever seen
make: *** [test_dynamic] Error 255
MISSING PREREQUISITES:
It was observed that the test suite seem to fail without these modules:
SOAP::Lite
Test::Pod::Coverage
As such, adding the prerequisite module(s) to 'PREREQ_PM' in your
Makefile.PL should solve this problem. For example:
WriteMakefile(
AUTHOR => 'MKUTTER (cpanplus-info@lists.sf.net)',
... # other information
PREREQ_PM => {
'SOAP::Lite' => '0', # or a minimum working version
'Test::Pod::Coverage' => '0', # or a minimum working version
}
);
If you are interested in making a more flexible Makefile.PL that can
probe for missing dependencies and install them, ExtUtils::AutoInstall
at <http://search.cpan.org/dist/ExtUtils-AutoInstall/> may be
worth a look.
Thanks! :-)
******************************** NOTE ********************************
The comments above are created mechanically, possibly without manual
checking by the sender. As there are many people performing automatic
tests on each upload to CPAN, it is likely that you will receive
identical messages about the same problem.
If you believe that the message is mistaken, please reply to the first
one with correction and/or additional informations, and do not take
it personally. We appreciate your patience. :)
**********************************************************************
Additional comments:
This report was machine-generated by CPAN::YACSmoke 0.0307.
------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------
Environment variables:
AUTOMATED_TESTING = 1
LANG = en_GB.UTF-8
PATH = /usr/local/bin:/bin:/usr/bin:/usr/X11/bin
PERL5LIB = :/home/cpan/.cpanplus/5.8.8/build/SOAP-WSDL-1.22/blib/lib:/home/cpan/.cpanplus/5.8.8/build/SOAP-WSDL-1.22/blib/arch:/home/cpan/.cpanplus/5.8.8/build/SOAP-WSDL-1.22/blib
PERL5_CPANPLUS_IS_RUNNING = 19902
PERL5_CPANPLUS_IS_VERSION = 0.78
PERL_MM_USE_DEFAULT = 1
SHELL = /bin/bash
TERM = screen.linux
Perl special variables (and OS-specific diagnostics, for MSWin32):
Perl: $^X = /home/cpan/perl588/bin/perl
UID: $< = 1000
EUID: $> = 1000
GID: $( = 100 100
EGID: $) = 100 100
-------------------------------
--
Summary of my perl5 (revision 5 version 8 subversion 8) configuration:
Platform:
osname=linux, osvers=2.6.16.38, archname=i686-linux-thread-multi-64int-ld
uname='linux scratch 2.6.16.38 #1 preempt thu feb 22 16:04:10 gmt 2007 i686 athlon-4 i386 gnulinux '
config_args=''
hint=recommended, useposix=true, d_sigaction=define
usethreads=define use5005threads=undef useithreads=define usemultiplicity=define
useperlio=define d_sfio=undef uselargefiles=define usesocks=undef
use64bitint=define use64bitall=undef uselongdouble=define
usemymalloc=n, bincompat5005=undef
Compiler:
cc='cc', ccflags ='-D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS -fno-strict-aliasing -pipe -Wdeclaration-after-statement -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64',
optimize='-O2',
cppflags='-D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS -fno-strict-aliasing -pipe -Wdeclaration-after-statement -I/usr/local/include'
ccversion='', gccversion='4.0.3', gccosandvers=''
intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=12345678
d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=12
ivtype='long long', ivsize=8, nvtype='long double', nvsize=12, Off_t='off_t', lseeksize=8
alignbytes=4, prototype=define
Linker and Libraries:
ld='cc', ldflags =' -L/usr/local/lib'
libpth=/usr/local/lib /lib /usr/lib
libs=-lnsl -lgdbm -ldb -ldl -lm -lcrypt -lutil -lpthread -lc
perllibs=-lnsl -ldl -lm -lcrypt -lutil -lpthread -lc
libc=/lib/libc-2.3.6.so, so=so, useshrplib=false, libperl=libperl.a
gnulibc_version='2.3.6'
Dynamic Linking:
dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E'
cccdlflags='-fpic', lddlflags='-shared -L/usr/local/lib'
-
FAIL SOAP-WSDL-1.22 i686-linux-thread-multi-64int-ld 2.6.16.38
by chris