FAIL Crypt-AoN-Util-0.02 OpenBSD.i386-openbsd-thread-multi 4.1

This distribution has been tested as part of the cpan-testers
effort to test as many new uploads to CPAN as possible.  See
http://testers.cpan.org/

Please cc any replies to cpan-testers@perl.org to keep other
test volunteers informed and to prevent any duplicate effort.

--

Dear ZANDET,
    
This is a computer-generated error report created automatically by
CPANPLUS, version 0.80. Testers personal comments may appear 
at the end of this report.


Thank you for uploading your work to CPAN.  However, it appears that
there were some problems testing your distribution.

TEST RESULTS:

Below is the error stack from stage 'make test':

[MSG] [Sun Aug 19 04:43:17 2007] Trying to get 'http://www.cpan.org/authors/id/Z/ZA/ZANDET/Crypt-AoN-Util-0.02.tar.gz'
[MSG] [Sun Aug 19 04:43:40 2007] Trying to get 'http://www.cpan.org/authors/id/Z/ZA/ZANDET/CHECKSUMS'
[MSG] [Sun Aug 19 04:43:42 2007] Checksum matches for 'Crypt-AoN-Util-0.02.tar.gz'
[MSG] [Sun Aug 19 04:43:43 2007] Extracted 'Crypt-AoN-Util-0.02/'
[MSG] [Sun Aug 19 04:43:43 2007] Extracted 'Crypt-AoN-Util-0.02/MANIFEST'
[MSG] [Sun Aug 19 04:43:43 2007] Extracted 'Crypt-AoN-Util-0.02/lib/'
[MSG] [Sun Aug 19 04:43:43 2007] Extracted 'Crypt-AoN-Util-0.02/lib/Crypt/'
[MSG] [Sun Aug 19 04:43:43 2007] Extracted 'Crypt-AoN-Util-0.02/lib/Crypt/AoN/'
[MSG] [Sun Aug 19 04:43:43 2007] Extracted 'Crypt-AoN-Util-0.02/lib/Crypt/AoN/Util.pm'
[MSG] [Sun Aug 19 04:43:43 2007] Extracted 'Crypt-AoN-Util-0.02/Changes'
[MSG] [Sun Aug 19 04:43:43 2007] Extracted 'Crypt-AoN-Util-0.02/t/'
[MSG] [Sun Aug 19 04:43:43 2007] Extracted 'Crypt-AoN-Util-0.02/t/Crypt-AoN-Util.t'
[MSG] [Sun Aug 19 04:43:43 2007] Extracted 'Crypt-AoN-Util-0.02/README'
[MSG] [Sun Aug 19 04:43:43 2007] Extracted 'Crypt-AoN-Util-0.02/Makefile.PL'
[MSG] [Sun Aug 19 04:43:43 2007] Extracted 'Crypt-AoN-Util-0.02/META.yml'
[MSG] [Sun Aug 19 04:43:43 2007] Extracted 'Crypt::AoN::Util' to '/home/chris/.cpanplus/5.8.8/build/Crypt-AoN-Util-0.02'
[MSG] [Sun Aug 19 04:43:44 2007] Checking if your kit is complete...
Looks good
Writing Makefile for Crypt::AoN::Util

[MSG] [Sun Aug 19 04:43:44 2007] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value'
[MSG] [Sun Aug 19 04:43:48 2007] cp lib/Crypt/AoN/Util.pm blib/lib/Crypt/AoN/Util.pm
Manifying blib/man3/Crypt::AoN::Util.3

[ERROR] [Sun Aug 19 04:43:49 2007] MAKE TEST failed:  PERL_DL_NONLAZY=1 /home/chris/perl588/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
t/Crypt-AoN-Util....
#   Failed test 'use Crypt::AoN::Util;'
#   at t/Crypt-AoN-Util.t line 11.
#     Tried to use 'Crypt::AoN::Util'.
#     Error:  Can't locate Crypt/Random.pm in @INC (@INC contains: ./ /home/chris/.cpanplus/5.8.8/build/Crypt-AoN-Util-0.02/blib/lib /home/chris/.cpanplus/5.8.8/build/Crypt-AoN-Util-0.02/blib/arch /home/chris/.cpanplus/5.8.8/build/Crypt-AoN-Util-0.02/blib /home/chris/perl588/lib/5.8.8/OpenBSD.i386-openbsd-thread-multi /home/chris/perl588/lib/5.8.8 /home/chris/perl588/lib/site_perl/5.8.8/OpenBSD.i386-openbsd-thread-multi /home/chris/perl588/lib/site_perl/5.8.8 /home/chris/perl588/lib/site_perl .) at /home/chris/.cpanplus/5.8.8/build/Crypt-AoN-Util-0.02/blib/lib/Crypt/AoN/Util.pm line 7.
# BEGIN failed--compilation aborted at t/Crypt-AoN-Util.t line 11.
# Compilation failed in require at (eval 3) line 2.
# BEGIN failed--compilation aborted at (eval 3) line 2.
Undefined subroutine &main::newKey called at t/Crypt-AoN-Util.t line 20.
# Looks like you planned 11 tests but only ran 1.
# Looks like you failed 1 test of 1 run.
# Looks like your test died just after 1.
dubious
	Test returned status 255 (wstat 65280, 0xff00)
DIED. FAILED tests 1-11
	Failed 11/11 tests, 0.00% okay
Failed Test        Stat Wstat Total Fail  List of Failed
-------------------------------------------------------------------------------
t/Crypt-AoN-Util.t  255 65280    11   21  1-11
Failed 1/1 test scripts. 11/11 subtests failed.
Files=1, Tests=11,  1 wallclock secs ( 0.11 cusr +  0.19 csys =  0.30 CPU)
Failed 1/1 test programs. 11/11 subtests failed.
*** Error code 255

Stop in /home/chris/.cpanplus/5.8.8/build/Crypt-AoN-Util-0.02 (line 760 of Makefile).

[MSG] [Sun Aug 19 04:43:49 2007] DEFAULT 'proceed_on_test_failure' HANDLER RETURNING 'sub return value'


MISSING PREREQUISITES:

It was observed that the test suite seem to fail without these modules:

Crypt::Random

As such, adding the prerequisite module(s) to 'PREREQ_PM' in your
Makefile.PL should solve this problem.  For example:

WriteMakefile(
    AUTHOR      => 'ZANDET (cpanplus-info@lists.sf.net)',
    ... # other information
    PREREQ_PM   => {
	'Crypt::Random'	=> '0', # or a minimum working version
    }
);

If you are interested in making a more flexible Makefile.PL that can
probe for missing dependencies and install them, ExtUtils::AutoInstall
at <http://search.cpan.org/dist/ExtUtils-AutoInstall/> may be
worth a look.

Thanks! :-)


******************************** NOTE ********************************
The comments above are created mechanically, possibly without manual
checking by the sender.  As there are many people performing automatic
tests on each upload to CPAN, it is likely that you will receive 
identical messages about the same problem.

If you believe that the message is mistaken, please reply to the first
one with correction and/or additional informations, and do not take
it personally.  We appreciate your patience. :)
**********************************************************************

Additional comments:
 

This report was machine-generated by CPAN::YACSmoke 0.0307.

------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------

Environment variables:

    AUTOMATED_TESTING = 1
    PATH = /home/chris/bin:/bin:/sbin:/usr/bin:/usr/sbin:/usr/X11R6/bin:/usr/local/bin:/usr/local/sbin:/usr/games:.
    PERL5LIB = :/home/chris/.cpanplus/5.8.8/build/Crypt-AoN-Util-0.02/blib/lib:/home/chris/.cpanplus/5.8.8/build/Crypt-AoN-Util-0.02/blib/arch:/home/chris/.cpanplus/5.8.8/build/Crypt-AoN-Util-0.02/blib
    PERL5_CPANPLUS_IS_RUNNING = 15738
    PERL5_CPANPLUS_IS_VERSION = 0.80
    PERL_MM_USE_DEFAULT = 1
    SHELL = /bin/ksh
    TERM = screen

Perl special variables (and OS-specific diagnostics, for MSWin32):

    Perl: $^X = /home/chris/perl588/bin/perl
    UID:  $<  = 1000
    EUID: $>  = 1000
    GID:  $(  = 10 0 10
    EGID: $)  = 10 0 10


-------------------------------


--

Summary of my perl5 (revision 5 version 8 subversion 8) configuration:
  Platform:
    osname=openbsd, osvers=4.1, archname=OpenBSD.i386-openbsd-thread-multi
    uname='openbsd flurble.bingosnet.co.uk 4.1 generic#1435 i386 '
    config_args=''
    hint=recommended, useposix=true, d_sigaction=define
    usethreads=define use5005threads=undef useithreads=define usemultiplicity=define
    useperlio=define d_sfio=undef uselargefiles=define usesocks=undef
    use64bitint=undef use64bitall=undef uselongdouble=undef
    usemymalloc=n, bincompat5005=undef
  Compiler:
    cc='cc', ccflags ='-pthread -fno-strict-aliasing -fno-delete-null-pointer-checks -pipe -I/usr/local/include',
    optimize='-O2',
    cppflags='-pthread -fno-strict-aliasing -fno-delete-null-pointer-checks -pipe -I/usr/local/include'
    ccversion='', gccversion='3.3.5 (propolice)', gccosandvers='openbsd4.1'
    intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=1234
    d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=12
    ivtype='long', ivsize=4, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8
    alignbytes=4, prototype=define
  Linker and Libraries:
    ld='cc', ldflags ='-pthread -Wl,-E  -L/usr/local/lib'
    libpth=/usr/local/lib /usr/lib
    libs=-lm -lutil -lc
    perllibs=-lm -lutil -lc
    libc=/usr/lib/libc.so.40.3, so=so, useshrplib=false, libperl=libperl.a
    gnulibc_version=''
  Dynamic Linking:
    dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags=' '
    cccdlflags='-DPIC -fPIC ', lddlflags='-shared -fPIC  -L/usr/local/lib'

• FAIL Crypt-AoN-Util-0.02 OpenBSD.i386-openbsd-thread-multi 4.1 by chris