Front page | perl.cpan.testers |
Postings from October 2007
FAIL XML-Compile-SOAP-0.56 i686-linux-thread-multi-64int 2.6.18-4-k7
Thread Next
From:
andreas.koenig.gmwojprw
Date:
October 12, 2007 07:43
Subject:
FAIL XML-Compile-SOAP-0.56 i686-linux-thread-multi-64int 2.6.18-4-k7
This distribution has been tested as part of the cpan-testers
effort to test as many new uploads to CPAN as possible. See
http://testers.cpan.org/
Please cc any replies to cpan-testers@perl.org to keep other
test volunteers informed and to prevent any duplicate effort.
--
Dear Mark Overmeer,
This is a computer-generated report for XML-Compile-SOAP-0.56
on perl-5.8.5, created automatically by CPAN-Reporter-1.00
and sent to the CPAN Testers mailing list.
If you have received this email directly, it is because the person testing
your distribution chose to send a copy to your CPAN email address; there
may be a delay before the official report is received and processed
by CPAN Testers.
Thank you for uploading your work to CPAN. However, it appears that
there were some problems with your distribution. If these results are
not what you expect, please consult "Notes for CPAN Authors" on
the CPAN Testers Wiki: http://cpantest.grango.org
Sections of this report:
* Tester comments
* Program output
* Prerequisites
* Environment and other context
------------------------------
TESTER COMMENTS
------------------------------
Additional comments from tester:
[none provided]
------------------------------
PROGRAM OUTPUT
------------------------------
Output from '/usr/bin/make test':
PERL_DL_NONLAZY=1 /home/src/perl/repoperls/installed-perls/maint-5.8/pOrDlAM/perl-5.8.0@23390/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
t/01use.........Test::More version 0.72
Test::Deep version 0.098
XML::Compile version 0.55
XML::LibXML version 1.65
Math::BigInt version 1.87
libxml2 2.6.29
# Failed test 'require XML::Compile::SOAP11::Client;'
# at t/01use.t line 36.
# Tried to require 'XML::Compile::SOAP11::Client'.
# Error: Can't locate XML/Compile/SOAP11/Client.pm in @INC (@INC contains: ../XMLCompile/lib ../../XMLCompile/lib lib t /home/sand/.cpan/build/XML-Compile-SOAP-0.56-yJTVNO/blib/lib /home/sand/.cpan/build/XML-Compile-SOAP-0.56-yJTVNO/blib/arch /home/sand/.cpan/build/CORBA-Python-2.60-lccsJs/blib/arch /home/sand/.cpan/build/CORBA-Python-2.60-lccsJs/blib/lib /home/src/perl/repoperls/installed-perls/maint-5.8/pOrDlAM/perl-5.8.0@23390/lib/5.8.5/i686-linux-thread-multi-64int /home/src/perl/repoperls/installed-perls/maint-5.8/pOrDlAM/perl-5.8.0@23390/lib/5.8.5 /home/src/perl/repoperls/installed-perls/maint-5.8/pOrDlAM/perl-5.8.0@23390/lib/site_perl/5.8.5/i686-linux-thread-multi-64int /home/src/perl/repoperls/installed-perls/maint-5.8/pOrDlAM/perl-5.8.0@23390/lib/site_perl/5.8.5 /home/src/perl/repoperls/installed-perls/maint-5.8/pOrDlAM/perl-5.8.0@23390/lib/site_perl .) at (eval 31) line 2.
# Failed test 'require XML::Compile::SOAP12::Client;'
# at t/01use.t line 39.
# Tried to require 'XML::Compile::SOAP12::Client'.
# Error: Can't locate XML/Compile/SOAP12/Client.pm in @INC (@INC contains: ../XMLCompile/lib ../../XMLCompile/lib lib t /home/sand/.cpan/build/XML-Compile-SOAP-0.56-yJTVNO/blib/lib /home/sand/.cpan/build/XML-Compile-SOAP-0.56-yJTVNO/blib/arch /home/sand/.cpan/build/CORBA-Python-2.60-lccsJs/blib/arch /home/sand/.cpan/build/CORBA-Python-2.60-lccsJs/blib/lib /home/src/perl/repoperls/installed-perls/maint-5.8/pOrDlAM/perl-5.8.0@23390/lib/5.8.5/i686-linux-thread-multi-64int /home/src/perl/repoperls/installed-perls/maint-5.8/pOrDlAM/perl-5.8.0@23390/lib/5.8.5 /home/src/perl/repoperls/installed-perls/maint-5.8/pOrDlAM/perl-5.8.0@23390/lib/site_perl/5.8.5/i686-linux-thread-multi-64int /home/src/perl/repoperls/installed-perls/maint-5.8/pOrDlAM/perl-5.8.0@23390/lib/site_perl/5.8.5 /home/src/perl/repoperls/installed-perls/maint-5.8/pOrDlAM/perl-5.8.0@23390/lib/site_perl .) at (eval 35) line 2.
# Looks like you failed 2 tests of 13.
Dubious, test returned 2 (wstat 512, 0x200)
Failed 2/13 subtests
t/10soap11......Can't locate XML/Compile/SOAP11/Client.pm in @INC (@INC contains: ../XMLCompile/lib ../../XMLCompile/lib lib t /home/sand/.cpan/build/XML-Compile-SOAP-0.56-yJTVNO/blib/lib /home/sand/.cpan/build/XML-Compile-SOAP-0.56-yJTVNO/blib/arch /home/sand/.cpan/build/CORBA-Python-2.60-lccsJs/blib/arch /home/sand/.cpan/build/CORBA-Python-2.60-lccsJs/blib/lib /home/src/perl/repoperls/installed-perls/maint-5.8/pOrDlAM/perl-5.8.0@23390/lib/5.8.5/i686-linux-thread-multi-64int /home/src/perl/repoperls/installed-perls/maint-5.8/pOrDlAM/perl-5.8.0@23390/lib/5.8.5 /home/src/perl/repoperls/installed-perls/maint-5.8/pOrDlAM/perl-5.8.0@23390/lib/site_perl/5.8.5/i686-linux-thread-multi-64int /home/src/perl/repoperls/installed-perls/maint-5.8/pOrDlAM/perl-5.8.0@23390/lib/site_perl/5.8.5 /home/src/perl/repoperls/installed-perls/maint-5.8/pOrDlAM/perl-5.8.0@23390/lib/site_perl .) at t/10soap11.t line 14.
BEGIN failed--compilation aborted at t/10soap11.t line 14.
# Looks like your test died before it could output anything.
Dubious, test returned 255 (wstat 65280, 0xff00)
No subtests run
t/50wsdl11......Can't locate XML/Compile/SOAP11/Client.pm in @INC (@INC contains: ../XMLCompile/lib ../../XMLCompile/lib lib t /home/sand/.cpan/build/XML-Compile-SOAP-0.56-yJTVNO/blib/lib /home/sand/.cpan/build/XML-Compile-SOAP-0.56-yJTVNO/blib/arch /home/sand/.cpan/build/CORBA-Python-2.60-lccsJs/blib/arch /home/sand/.cpan/build/CORBA-Python-2.60-lccsJs/blib/lib /home/src/perl/repoperls/installed-perls/maint-5.8/pOrDlAM/perl-5.8.0@23390/lib/5.8.5/i686-linux-thread-multi-64int /home/src/perl/repoperls/installed-perls/maint-5.8/pOrDlAM/perl-5.8.0@23390/lib/5.8.5 /home/src/perl/repoperls/installed-perls/maint-5.8/pOrDlAM/perl-5.8.0@23390/lib/site_perl/5.8.5/i686-linux-thread-multi-64int /home/src/perl/repoperls/installed-perls/maint-5.8/pOrDlAM/perl-5.8.0@23390/lib/site_perl/5.8.5 /home/src/perl/repoperls/installed-perls/maint-5.8/pOrDlAM/perl-5.8.0@23390/lib/site_perl .) at lib/XML/Compile/WSDL11/Operation.pm line 133.
# Looks like you planned 39 tests but only ran 37.
# Looks like your test died just after 37.
Dubious, test returned 255 (wstat 65280, 0xff00)
Failed 2/39 subtests
t/pod...........ok
Test Summary Report
-------------------
t/01use.t (Wstat: 512 Tests: 13 Failed: 2)
Failed test number(s): 3, 6
Non-zero exit status: 2
t/10soap11.t (Wstat: 65280 Tests: 0 Failed: 0)
Non-zero exit status: 255
Parse errors: No plan found in TAP output
t/50wsdl11.t (Wstat: 65280 Tests: 37 Failed: 0)
Non-zero exit status: 255
Parse errors: Bad plan. You planned 39 tests but ran 37.
Files=4, Tests=70, 7 wallclock secs ( 0.07 usr 0.01 sys + 3.82 cusr 0.25 csys = 4.15 CPU)
Result: FAIL
Failed 3/4 test programs. 2/70 subtests failed.
make: *** [test_dynamic] Error 255
------------------------------
PREREQUISITES
------------------------------
Prerequisite modules loaded:
requires:
Module Need Have
------------ ----- ------
Log::Report 0.09 0.09
LWP 5.803 5.808
Net::Server 0.97 0.97
Test::Deep 0.095 0.098
Test::More 0.54 0.72
Test::Pod 1 1.26
Time::HiRes 0 1.9708
XML::Compile 0.55 0.55
------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------
Environment variables:
LANG = C
PATH = /usr/lib/ccache:/home/sand/bin:/usr/local/bin:/usr/bin:/bin:/usr/bin/X11:/usr/games:/usr/local/perl/bin:/usr/X11/bin:/sbin:/usr/sbin
PERL5LIB = /home/sand/.cpan/build/CORBA-Python-2.60-lccsJs/blib/arch:/home/sand/.cpan/build/CORBA-Python-2.60-lccsJs/blib/lib
PERL5_CPANPLUS_IS_RUNNING = 4238
PERL5_CPAN_IS_RUNNING = 4238
PERL_MM_USE_DEFAULT = 1
SHELL = /usr/bin/zsh
TERM = screen
Perl special variables (and OS-specific diagnostics, for MSWin32):
$^X = /home/src/perl/repoperls/installed-perls/maint-5.8/pOrDlAM/perl-5.8.0@23390/bin/perl
$UID/$EUID = 1005 / 1005
$GID = 1005 1005
$EGID = 1005 1005
Perl module toolchain versions installed:
Module Have
------------------- -------
CPAN 1.9203
Cwd 3.25
ExtUtils::CBuilder 0.19
ExtUtils::Command 1.13
ExtUtils::Install 1.44
ExtUtils::MakeMaker 6.36
ExtUtils::Manifest 1.51
ExtUtils::ParseXS 2.18
File::Spec 3.25
Module::Build 0.2808
Module::Signature 0.55
Test::Harness 2.99_04
Test::More 0.72
YAML 0.66
YAML::Syck 0.97
version 0.73
--
Summary of my perl5 (revision 5 version 8 subversion 5) configuration:
Platform:
osname=linux, osvers=2.6.18-4-k7, archname=i686-linux-thread-multi-64int
uname='linux k75 2.6.18-4-k7 #1 smp mon mar 26 17:57:15 utc 2007 i686 gnulinux '
config_args='-Dprefix=/home/src/perl/repoperls/installed-perls/maint-5.8/pOrDlAM/perl-5.8.0@23390 -Dinstallusrbinperl=n -Uversiononly -des -Dusethreads -Duse64bitint -Dusedevel -Doptimize=-g -Dnoextensions=Encode'
hint=recommended, useposix=true, d_sigaction=define
usethreads=define use5005threads=undef useithreads=define usemultiplicity=define
useperlio=define d_sfio=undef uselargefiles=define usesocks=undef
use64bitint=define use64bitall=undef uselongdouble=undef
usemymalloc=n, bincompat5005=undef
Compiler:
cc='cc', ccflags ='-D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS -DDEBUGGING -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64',
optimize='-g',
cppflags='-D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS -DDEBUGGING -fno-strict-aliasing -pipe -I/usr/local/include'
ccversion='', gccversion='4.1.2 20061115 (prerelease) (Debian 4.1.1-21)', gccosandvers=''
intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=12345678
d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=12
ivtype='long long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8
alignbytes=4, prototype=define
Linker and Libraries:
ld='cc', ldflags =' -L/usr/local/lib'
libpth=/usr/local/lib /lib /usr/lib
libs=-lnsl -lgdbm -ldb -ldl -lm -lcrypt -lutil -lpthread -lc
perllibs=-lnsl -ldl -lm -lcrypt -lutil -lpthread -lc
libc=/lib/libc-2.3.6.so, so=so, useshrplib=false, libperl=libperl.a
gnulibc_version='2.3.6'
Dynamic Linking:
dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E'
cccdlflags='-fpic', lddlflags='-shared -L/usr/local/lib'
Thread Next