FAIL Bencode-1.3 alpha-linux-thread-multi 2.6.18-5-alpha-generic

This distribution has been tested as part of the cpan-testers
effort to test as many new uploads to CPAN as possible.  See
http://testers.cpan.org/

Please cc any replies to cpan-testers@perl.org to keep other
test volunteers informed and to prevent any duplicate effort.

--

Dear ARISTOTLE,
    
This is a computer-generated error report created automatically by
CPANPLUS, version 0.83_02. Testers personal comments may appear 
at the end of this report.


Thank you for uploading your work to CPAN.  However, it appears that
there were some problems testing your distribution.

TEST RESULTS:

Below is the error stack from stage 'make test':

[MSG] [Mon Nov  5 10:06:21 2007] Trying to get 'http://www.cpan.org/authors/id/A/AR/ARISTOTLE/Bencode-1.3.tar.gz'
[MSG] [Mon Nov  5 10:06:22 2007] Trying to get 'http://www.cpan.org/authors/id/A/AR/ARISTOTLE/CHECKSUMS'
[MSG] [Mon Nov  5 10:06:23 2007] Checksum matches for 'Bencode-1.3.tar.gz'
[MSG] [Mon Nov  5 10:06:23 2007] Extracted 'Bencode-1.3/'
[MSG] [Mon Nov  5 10:06:23 2007] Extracted 'Bencode-1.3/README'
[MSG] [Mon Nov  5 10:06:23 2007] Extracted 'Bencode-1.3/t/'
[MSG] [Mon Nov  5 10:06:23 2007] Extracted 'Bencode-1.3/t/cpants.t'
[MSG] [Mon Nov  5 10:06:23 2007] Extracted 'Bencode-1.3/t/01.bdecode.t'
[MSG] [Mon Nov  5 10:06:23 2007] Extracted 'Bencode-1.3/t/02.bencode.t'
[MSG] [Mon Nov  5 10:06:23 2007] Extracted 'Bencode-1.3/t/00.load.t'
[MSG] [Mon Nov  5 10:06:23 2007] Extracted 'Bencode-1.3/Changes'
[MSG] [Mon Nov  5 10:06:23 2007] Extracted 'Bencode-1.3/META.yml'
[MSG] [Mon Nov  5 10:06:23 2007] Extracted 'Bencode-1.3/Makefile.PL'
[MSG] [Mon Nov  5 10:06:23 2007] Extracted 'Bencode-1.3/MANIFEST'
[MSG] [Mon Nov  5 10:06:23 2007] Extracted 'Bencode-1.3/Build.PL'
[MSG] [Mon Nov  5 10:06:23 2007] Extracted 'Bencode-1.3/lib/'
[MSG] [Mon Nov  5 10:06:23 2007] Extracted 'Bencode-1.3/lib/Bencode.pm'
[MSG] [Mon Nov  5 10:06:23 2007] Extracted 'Bencode' to '/home/chris/perl588/.cpanplus/5.8.8/build/Bencode-1.3'
[MSG] [Mon Nov  5 10:06:24 2007] Checking if your kit is complete...
Looks good
Writing Makefile for Bencode

[MSG] [Mon Nov  5 10:06:24 2007] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value'
[MSG] [Mon Nov  5 10:06:29 2007] cp lib/Bencode.pm blib/lib/Bencode.pm
Manifying blib/man3/Bencode.3

[ERROR] [Mon Nov  5 10:06:32 2007] MAKE TEST failed: Illegal seek PERL_DL_NONLAZY=1 /home/chris/perl588/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
t/00.load.......Variable "$DEBUG" is not imported at /home/chris/perl588/.cpanplus/5.8.8/build/Bencode-1.3/blib/lib/Bencode.pm line 28.
Variable "$DEBUG" is not imported at /home/chris/perl588/.cpanplus/5.8.8/build/Bencode-1.3/blib/lib/Bencode.pm line 44.
Variable "$DEBUG" is not imported at /home/chris/perl588/.cpanplus/5.8.8/build/Bencode-1.3/blib/lib/Bencode.pm line 55.
Variable "$DEBUG" is not imported at /home/chris/perl588/.cpanplus/5.8.8/build/Bencode-1.3/blib/lib/Bencode.pm line 59.
Variable "$DEBUG" is not imported at /home/chris/perl588/.cpanplus/5.8.8/build/Bencode-1.3/blib/lib/Bencode.pm line 62.
Variable "$DEBUG" is not imported at /home/chris/perl588/.cpanplus/5.8.8/build/Bencode-1.3/blib/lib/Bencode.pm line 68.
Variable "$DEBUG" is not imported at /home/chris/perl588/.cpanplus/5.8.8/build/Bencode-1.3/blib/lib/Bencode.pm line 72.
Variable "$do_lenient_decode" is not imported at /home/chris/perl588/.cpanplus/5.8.8/build/Bencode-1.3/blib/lib/Bencode.pm line 84.
Variable "$do_lenient_decode" is not imported at /home/chris/perl588/.cpanplus/5.8.8/build/Bencode-1.3/blib/lib/Bencode.pm line 101.

#   Failed test 'use Bencode;'
#   at t/00.load.t line 4.
#     Tried to use 'Bencode'.
#     Error:  Global symbol "$DEBUG" requires explicit package name at /home/chris/perl588/.cpanplus/5.8.8/build/Bencode-1.3/blib/lib/Bencode.pm line 28.
# Global symbol "$DEBUG" requires explicit package name at /home/chris/perl588/.cpanplus/5.8.8/build/Bencode-1.3/blib/lib/Bencode.pm line 44.
# Global symbol "$DEBUG" requires explicit package name at /home/chris/perl588/.cpanplus/5.8.8/build/Bencode-1.3/blib/lib/Bencode.pm line 55.
# Global symbol "$DEBUG" requires explicit package name at /home/chris/perl588/.cpanplus/5.8.8/build/Bencode-1.3/blib/lib/Bencode.pm line 59.
# Global symbol "$DEBUG" requires explicit package name at /home/chris/perl588/.cpanplus/5.8.8/build/Bencode-1.3/blib/lib/Bencode.pm line 62.
# Global symbol "$DEBUG" requires explicit package name at /home/chris/perl588/.cpanplus/5.8.8/build/Bencode-1.3/blib/lib/Bencode.pm line 68.
# Global symbol "$DEBUG" requires explicit package name at /home/chris/perl588/.cpanplus/5.8.8/build/Bencode-1.3/blib/lib/Bencode.pm line 72.
# Global symbol "$do_lenient_decode" requires explicit package name at /home/chris/perl588/.cpanplus/5.8.8/build/Bencode-1.3/blib/lib/Bencode.pm line 84.
# Global symbol "$do_lenient_decode" requires explicit package name at /home/chris/perl588/.cpanplus/5.8.8/build/Bencode-1.3/blib/lib/Bencode.pm line 101.
# Compilation failed in require at (eval 3) line 2.
# BEGIN failed--compilation aborted at t/00.load.t line 4.
FAILED--Further testing stopped: testing pointless if the module won't even load
make: *** [test_dynamic] Error 9

[MSG] [Mon Nov  5 10:06:32 2007] DEFAULT 'proceed_on_test_failure' HANDLER RETURNING 'sub return value'

PREREQUISITES:

Here is a list of prerequisites you specified and versions we 
managed to load:
                                
	  Module Name                        Have     Want
	  Test::More                         0.72        0

******************************** NOTE ********************************
The comments above are created mechanically, possibly without manual
checking by the sender.  As there are many people performing automatic
tests on each upload to CPAN, it is likely that you will receive 
identical messages about the same problem.

If you believe that the message is mistaken, please reply to the first
one with correction and/or additional informations, and do not take
it personally.  We appreciate your patience. :)
**********************************************************************

Additional comments:
 

This report was machine-generated by CPAN::YACSmoke 0.0309.

------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------

Environment variables:

    AUTOMATED_TESTING = 1
    LANG = en_GB.UTF-8
    PATH = /usr/local/bin:/usr/bin:/bin:/usr/games
    PERL5LIB = :/home/chris/perl588/.cpanplus/5.8.8/build/Bencode-1.3/blib/lib:/home/chris/perl588/.cpanplus/5.8.8/build/Bencode-1.3/blib/arch:/home/chris/perl588/.cpanplus/5.8.8/build/Bencode-1.3/blib
    PERL5_CPANPLUS_IS_RUNNING = 5781
    PERL5_CPANPLUS_IS_VERSION = 0.83_02
    PERL_MM_USE_DEFAULT = 1
    SHELL = /bin/bash
    TERM = screen

Perl special variables (and OS-specific diagnostics, for MSWin32):

    Perl: $^X = /home/chris/perl588/bin/perl
    UID:  $<  = 1000
    EUID: $>  = 1000
    GID:  $(  = 1000 1000 46 44 29 25 24 20
    EGID: $)  = 1000 1000 46 44 29 25 24 20


-------------------------------


--

Summary of my perl5 (revision 5 version 8 subversion 8) configuration:
  Platform:
    osname=linux, osvers=2.6.18-5-alpha-generic, archname=alpha-linux-thread-multi
    uname='linux debbie 2.6.18-5-alpha-generic #1 tue oct 2 23:07:38 utc 2007 alpha gnulinux '
    config_args=''
    hint=recommended, useposix=true, d_sigaction=define
    usethreads=define use5005threads=undef useithreads=define usemultiplicity=define
    useperlio=define d_sfio=undef uselargefiles=define usesocks=undef
    use64bitint=define use64bitall=define uselongdouble=undef
    usemymalloc=n, bincompat5005=undef
  Compiler:
    cc='cc', ccflags ='-D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS -fno-strict-aliasing -pipe -Wdeclaration-after-statement -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64',
    optimize='-O2',
    cppflags='-D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS -fno-strict-aliasing -pipe -Wdeclaration-after-statement -I/usr/local/include'
    ccversion='', gccversion='4.1.2 20061115 (prerelease) (Debian 4.1.1-21)', gccosandvers=''
    intsize=4, longsize=8, ptrsize=8, doublesize=8, byteorder=12345678
    d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=8
    ivtype='long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8
    alignbytes=8, prototype=define
  Linker and Libraries:
    ld='cc', ldflags =' -L/usr/local/lib'
    libpth=/usr/local/lib /lib /usr/lib
    libs=-lnsl -ldb -ldl -lm -lcrypt -lutil -lpthread -lc
    perllibs=-lnsl -ldl -lm -lcrypt -lutil -lpthread -lc
    libc=, so=so, useshrplib=false, libperl=libperl.a
    gnulibc_version='2.3.6'
  Dynamic Linking:
    dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E'
    cccdlflags='-fpic', lddlflags='-shared -L/usr/local/lib'

• FAIL Bencode-1.3 alpha-linux-thread-multi 2.6.18-5-alpha-generic by chris