FAIL DBD-mysql-2.1024 i386-linux-thread-multi 2.4.19-2mdkenterprise

This distribution has been tested as part of the cpan-testers
effort to test as many new uploads to CPAN as possible.  See
http://testers.cpan.org/

Please cc any replies to cpan-testers@perl.org to keep other
test volunteers informed and to prevent any duplicate effort.
	
--
This is an error report generated automatically by CPANPLUS,
version 0.042.

Below is the error stack during 'make':

cp lib/DBD/mysql.pm blib/lib/DBD/mysql.pm
cp lib/DBD/mysql/INSTALL.pod blib/lib/DBD/mysql/INSTALL.pod
cp lib/Mysql.pm blib/lib/Mysql.pm
cp lib/Mysql/Statement.pm blib/lib/Mysql/Statement.pm
cp lib/DBD/mysql.pod blib/lib/DBD/mysql.pod
cp lib/Bundle/DBD/mysql.pm blib/lib/Bundle/DBD/mysql.pm
gcc -c  -I/usr/lib/perl5/site_perl/5.8.0/i386-linux-thread-multi/auto/DBI -I/usr/include/mysql -D_REENTRANT -D_GNU_SOURCE -fno-strict-aliasing -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -I/usr/include/gdbm -O3 -fomit-frame-pointer -pipe -mcpu=pentiumpro -march=i586 -ffast-math -fno-strength-reduce   -DVERSION=\"2.1024\" -DXS_VERSION=\"2.1024\" -fpic "-I/usr/lib/perl5/5.8.0/i386-linux-thread-multi/CORE"   dbdimp.c
/usr/bin/perl5.8.0 -p -e "s/~DRIVER~/mysql/g" < /usr/lib/perl5/site_perl/5.8.0/i386-linux-thread-multi/auto/DBI/Driver.xst > mysql.xsi
/usr/bin/perl5.8.0 /usr/lib/perl5/5.8.0/ExtUtils/xsubpp  -typemap /usr/lib/perl5/5.8.0/ExtUtils/typemap  mysql.xs > mysql.xsc && mv mysql.xsc mysql.c
Warning: duplicate function definition 'rows' detected in mysql.xs, line 289
gcc -c  -I/usr/lib/perl5/site_perl/5.8.0/i386-linux-thread-multi/auto/DBI -I/usr/include/mysql -D_REENTRANT -D_GNU_SOURCE -fno-strict-aliasing -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -I/usr/include/gdbm -O3 -fomit-frame-pointer -pipe -mcpu=pentiumpro -march=i586 -ffast-math -fno-strength-reduce   -DVERSION=\"2.1024\" -DXS_VERSION=\"2.1024\" -fpic "-I/usr/lib/perl5/5.8.0/i386-linux-thread-multi/CORE"   mysql.c
Running Mkbootstrap for DBD::mysql ()
chmod 644 mysql.bs
rm -f blib/arch/auto/DBD/mysql/mysql.so
LD_RUN_PATH="/usr/lib/mysql" /usr/bin/perl5.8.0 myld gcc  -shared -L/usr/local/lib dbdimp.o mysql.o  -o blib/arch/auto/DBD/mysql/mysql.so   -L/usr/lib/mysql -lmysqlclient -lz  
/usr/bin/ld: cannot find -lz
collect2: ld returned 1 exit status


An error occurred while linking the DBD::mysql driver. The error
message seems to indicate that you don't have a libz.a, libgz.a,
libz.so or libgz.so. This is typically resolved by:

1.) You may try to remove the -lz or -lgz flag from the libs list
    by using the --libs switch for "perl Makefile.PL".
2.) On Red Hat Linux install libz-devel
3.) On other systems, please contact the mailing list

     Msql-Mysql-modules@lists.mysql.com

For further hints, see INSTALL.html, section Linker flags.
make: *** [blib/arch/auto/DBD/mysql/mysql.so] Error 1


Additional comments:

--

Summary of my perl5 (revision 5.0 version 8 subversion 0) configuration:
  Platform:
    osname=linux, osvers=2.4.19-2mdkenterprise, archname=i386-linux-thread-multi
    uname='linux no.mandrakesoft.com 2.4.19-2mdkenterprise #1 smp tue aug 13 00:17:42 cest 2002 i686 unknown unknown gnulinux '
    config_args='-des -Darchname=i386-linux -Dcc=gcc -Doptimize=-O3 -fomit-frame-pointer -pipe -mcpu=pentiumpro -march=i586 -ffast-math -fno-strength-reduce -Dprefix=/usr -Dvendorprefix=/usr -Dsiteprefix=/usr -Dman3ext=3pm -Dcf_by=MandrakeSoft -Dmyhostname=localhost -Dperladmin=root@localhost -Dd_dosuid -Ud_csh -Duseshrplib -Dusethreads'
    hint=recommended, useposix=true, d_sigaction=define
    usethreads=define use5005threads=undef useithreads=define usemultiplicity=define
    useperlio=define d_sfio=undef uselargefiles=define usesocks=undef
    use64bitint=undef use64bitall=undef uselongdouble=undef
    usemymalloc=n, bincompat5005=undef
  Compiler:
    cc='gcc', ccflags ='-D_REENTRANT -D_GNU_SOURCE -fno-strict-aliasing -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -I/usr/include/gdbm',
    optimize='-O3 -fomit-frame-pointer -pipe -mcpu=pentiumpro -march=i586 -ffast-math -fno-strength-reduce',
    cppflags='-D_REENTRANT -D_GNU_SOURCE -fno-strict-aliasing -I/usr/include/gdbm'
    ccversion='', gccversion='3.2 (Mandrake Linux 9.0 3.2-1mdk)', gccosandvers=''
    intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=1234
    d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=12
    ivtype='long', ivsize=4, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8
    alignbytes=4, prototype=define
  Linker and Libraries:
    ld='gcc', ldflags =' -L/usr/local/lib'
    libpth=/usr/local/lib /lib /usr/lib
    libs=-lnsl -lndbm -lgdbm -ldl -lm -lpthread -lc -lcrypt -lutil
    perllibs=-lnsl -ldl -lm -lpthread -lc -lcrypt -lutil
    libc=/lib/libc-2.2.5.so, so=so, useshrplib=true, libperl=libperl.so
    gnulibc_version='2.2.5'
  Dynamic Linking:
    dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-rdynamic -Wl,-rpath,/usr/lib/perl5/5.8.0/i386-linux-thread-multi/CORE'
    cccdlflags='-fpic', lddlflags='-shared -L/usr/local/lib'

• FAIL DBD-mysql-2.1024 i386-linux-thread-multi 2.4.19-2mdkenterprise by root