develooper Front page | perl.cpan.testers | Postings from December 2007

FAIL JSAN-Librarian-0.02 x86_64-linux-thread-multi-ld 2.6.22.10

From:
imacat
Date:
December 28, 2007 13:15
Subject:
FAIL JSAN-Librarian-0.02 x86_64-linux-thread-multi-ld 2.6.22.10
This distribution has been tested as part of the cpan-testers
effort to test as many new uploads to CPAN as possible.  See
http://testers.cpan.org/

Please cc any replies to cpan-testers@perl.org to keep other
test volunteers informed and to prevent any duplicate effort.

--
Dear Adam Kennedy,
    
This is a computer-generated report for JSAN-Librarian-0.02
on perl-5.10.0, created automatically by CPAN-Reporter-1.0601 
and sent to the CPAN Testers mailing list.  

If you have received this email directly, it is because the person testing 
your distribution chose to send a copy to your CPAN email address; there 
may be a delay before the official report is received and processed 
by CPAN Testers.

Thank you for uploading your work to CPAN.  However, it appears that
there were some problems with your distribution.  If these results are 
not what you expect or if you would like to learn how to avoid FAIL 
reports for missing dependencies, unsupported operating systems, etc.,
please consult "Notes for CPAN Authors" on the CPAN Testers Wiki: 
http://cpantest.grango.org

Sections of this report:

    * Tester comments
    * Program output
    * Prerequisites
    * Environment and other context

------------------------------
TESTER COMMENTS
------------------------------

Additional comments from tester: 

[none provided]

------------------------------
PROGRAM OUTPUT
------------------------------

Output from '/usr/bin/make test':

PERL_DL_NONLAZY=1 /opt/perl/5.10.0/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
t/01_compile......
#   Failed test 'use JSAN::Librarian::Book;'
#   at t/01_compile.t line 24.
#     Tried to use 'JSAN::Librarian::Book'.
#     Error:  Base class package "JavaScript::Librarian::Book" is empty.
#     (Perhaps you need to 'use' the module which defines that package first,
#     or make that module available in @INC (@INC contains: /home/imacat/.cpan/build/JSAN-Librarian-0.02-5uA3Av/blib/lib /home/imacat/.cpan/build/JSAN-Librarian-0.02-5uA3Av/blib/arch /home/imacat/.cpan/build/ExtUtils-AutoInstall-0.63-ToUIaZ/blib/arch /home/imacat/.cpan/build/ExtUtils-AutoInstall-0.63-ToUIaZ/blib/lib /home/imacat/lib/perl5 /opt/perl/5.10.0/lib/5.10.0/x86_64-linux-thread-multi-ld /opt/perl/5.10.0/lib/5.10.0 /opt/perl/5.10.0/lib/site_perl/5.10.0/x86_64-linux-thread-multi-ld /opt/perl/5.10.0/lib/site_perl/5.10.0 .).
#  at /home/imacat/.cpan/build/JSAN-Librarian-0.02-5uA3Av/blib/lib/JSAN/Librarian/Book.pm line 6
# BEGIN failed--compilation aborted at /home/imacat/.cpan/build/JSAN-Librarian-0.02-5uA3Av/blib/lib/JSAN/Librarian/Book.pm line 6.
# Compilation failed in require at (eval 4) line 2.
# BEGIN failed--compilation aborted at (eval 4) line 2.

#   Failed test 'use JSAN::Librarian::Library;'
#   at t/01_compile.t line 25.
#     Tried to use 'JSAN::Librarian::Library'.
#     Error:  Base class package "JavaScript::Librarian::Library" is empty.
#     (Perhaps you need to 'use' the module which defines that package first,
#     or make that module available in @INC (@INC contains: /home/imacat/.cpan/build/JSAN-Librarian-0.02-5uA3Av/blib/lib /home/imacat/.cpan/build/JSAN-Librarian-0.02-5uA3Av/blib/arch /home/imacat/.cpan/build/ExtUtils-AutoInstall-0.63-ToUIaZ/blib/arch /home/imacat/.cpan/build/ExtUtils-AutoInstall-0.63-ToUIaZ/blib/lib /home/imacat/lib/perl5 /opt/perl/5.10.0/lib/5.10.0/x86_64-linux-thread-multi-ld /opt/perl/5.10.0/lib/5.10.0 /opt/perl/5.10.0/lib/site_perl/5.10.0/x86_64-linux-thread-multi-ld /opt/perl/5.10.0/lib/site_perl/5.10.0 .).
#  at /home/imacat/.cpan/build/JSAN-Librarian-0.02-5uA3Av/blib/lib/JSAN/Librarian/Library.pm line 7
# BEGIN failed--compilation aborted at /home/imacat/.cpan/build/JSAN-Librarian-0.02-5uA3Av/blib/lib/JSAN/Librarian/Library.pm line 7.
# Compilation failed in require at (eval 6) line 2.
# BEGIN failed--compilation aborted at (eval 6) line 2.

#   Failed test 'use JSAN::Librarian;'
#   at t/01_compile.t line 26.
#     Tried to use 'JSAN::Librarian'.
#     Error:  Can't locate File/Find/Rule.pm in @INC (@INC contains: /home/imacat/.cpan/build/JSAN-Librarian-0.02-5uA3Av/blib/lib /home/imacat/.cpan/build/JSAN-Librarian-0.02-5uA3Av/blib/arch /home/imacat/.cpan/build/ExtUtils-AutoInstall-0.63-ToUIaZ/blib/arch /home/imacat/.cpan/build/ExtUtils-AutoInstall-0.63-ToUIaZ/blib/lib /home/imacat/lib/perl5 /opt/perl/5.10.0/lib/5.10.0/x86_64-linux-thread-multi-ld /opt/perl/5.10.0/lib/5.10.0 /opt/perl/5.10.0/lib/site_perl/5.10.0/x86_64-linux-thread-multi-ld /opt/perl/5.10.0/lib/site_perl/5.10.0 .) at /home/imacat/.cpan/build/JSAN-Librarian-0.02-5uA3Av/blib/lib/JSAN/Librarian.pm line 27.
# BEGIN failed--compilation aborted at /home/imacat/.cpan/build/JSAN-Librarian-0.02-5uA3Av/blib/lib/JSAN/Librarian.pm line 27.
# Compilation failed in require at (eval 8) line 2.
# BEGIN failed--compilation aborted at (eval 8) line 2.
# Looks like you failed 3 tests of 4.
 Dubious, test returned 3 (wstat 768, 0x300)
 Failed 3/4 subtests 
t/02_main.........Can't locate File/Find/Rule.pm in @INC (@INC contains: /home/imacat/.cpan/build/JSAN-Librarian-0.02-5uA3Av/blib/lib /home/imacat/.cpan/build/JSAN-Librarian-0.02-5uA3Av/blib/arch /home/imacat/.cpan/build/ExtUtils-AutoInstall-0.63-ToUIaZ/blib/arch /home/imacat/.cpan/build/ExtUtils-AutoInstall-0.63-ToUIaZ/blib/lib /home/imacat/lib/perl5 /opt/perl/5.10.0/lib/5.10.0/x86_64-linux-thread-multi-ld /opt/perl/5.10.0/lib/5.10.0 /opt/perl/5.10.0/lib/site_perl/5.10.0/x86_64-linux-thread-multi-ld /opt/perl/5.10.0/lib/site_perl/5.10.0 .) at /home/imacat/.cpan/build/JSAN-Librarian-0.02-5uA3Av/blib/lib/JSAN/Librarian.pm line 27.
BEGIN failed--compilation aborted at /home/imacat/.cpan/build/JSAN-Librarian-0.02-5uA3Av/blib/lib/JSAN/Librarian.pm line 27.
Compilation failed in require at t/02_main.t line 21.
BEGIN failed--compilation aborted at t/02_main.t line 21.
# Looks like your test died before it could output anything.
 Dubious, test returned 255 (wstat 65280, 0xff00)
 Failed 14/14 subtests 
t/99_pod..........skipped: Test::Pod 1.00 required for testing POD

Test Summary Report
-------------------
t/01_compile.t (Wstat: 768 Tests: 4 Failed: 3)
  Failed test number(s):  2-4
  Non-zero exit status: 3
t/02_main.t   (Wstat: 65280 Tests: 0 Failed: 0)
  Non-zero exit status: 255
  Parse errors: Bad plan.  You planned 14 tests but ran 0.
Files=3, Tests=4,  0 wallclock secs ( 0.01 usr  0.00 sys +  0.14 cusr  0.02 csys =  0.17 CPU)
Result: FAIL
Failed 2/3 test programs. 3/4 subtests failed.
make: *** [test_dynamic] Error 255

------------------------------
PREREQUISITES
------------------------------

Prerequisite modules loaded:

requires:

    Module                Need Have
    --------------------- ---- ----
    ExtUtils::AutoInstall 0.49 0.63

------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------

Environment variables:

    LANG = zh_TW
    LANGUAGE = zh_TW
    LC_ALL = zh_TW
    LC_COLLATE = zh_TW
    LC_CTYPE = zh_TW
    LC_MESSAGES = zh_TW
    LC_MONETARY = zh_TW
    LC_NUMERIC = zh_TW
    LC_TIME = zh_TW
    PATH = /home/imacat/bin:/bin:/usr/bin:/opt/java/bin:/usr/local/bin
    PERL5LIB = /home/imacat/.cpan/build/ExtUtils-AutoInstall-0.63-ToUIaZ/blib/arch:/home/imacat/.cpan/build/ExtUtils-AutoInstall-0.63-ToUIaZ/blib/lib:/home/imacat/lib/perl5
    PERL5_CPANPLUS_IS_RUNNING = 11699
    PERL5_CPAN_IS_RUNNING = 11699
    SHELL = /bin/zsh
    TERM = xterm

Perl special variables (and OS-specific diagnostics, for MSWin32):

    $^X = /opt/perl/5.10.0/bin/perl
    $UID/$EUID = 1000 / 1000
    $GID = 100 0 4 6 20 24 25 29 34 38 40 44 46 50 100 104 1000
    $EGID = 100 0 4 6 20 24 25 29 34 38 40 44 46 50 100 104 1000

Perl module toolchain versions installed:

    Module              Have     
    ------------------- ---------
    CPAN                1.9205   
    Cwd                 3.2501   
    ExtUtils::CBuilder  0.21     
    ExtUtils::Command   1.13     
    ExtUtils::Install   1.44     
    ExtUtils::MakeMaker 6.42     
    ExtUtils::Manifest  1.51_01  
    ExtUtils::ParseXS   2.18_02  
    File::Spec          3.2501   
    Module::Build       0.2808_01
    Module::Signature   0.55     
    Test::Harness       3.05     
    Test::More          0.74     
    YAML                0.66     
    YAML::Syck          n/a      
    version             0.74     


--

Summary of my perl5 (revision 5 version 10 subversion 0) configuration:
  Platform:
    osname=linux, osvers=2.6.22.10, archname=x86_64-linux-thread-multi-ld
    uname='linux rinse 2.6.22.10 #1 smp tue nov 20 02:36:22 cst 2007 x86_64 gnulinux '
    config_args='-d -Dusethreads -Dcc=gcc -Duselongdouble -Doptimize=-g -O3 -Duse64bitint -Duse64bitall -Dprefix=/opt/perl/5.10.0 -Dd_dosuid -Dinc_version_list=none -Duseshrplib=true -Dcf_email=imacat@mail.imacat.idv.tw'
    hint=recommended, useposix=true, d_sigaction=define
    useithreads=define, usemultiplicity=define
    useperlio=define, d_sfio=undef, uselargefiles=define, usesocks=undef
    use64bitint=define, use64bitall=define, uselongdouble=define
    usemymalloc=n, bincompat5005=undef
  Compiler:
    cc='gcc', ccflags ='-D_REENTRANT -D_GNU_SOURCE -DDEBUGGING -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64',
    optimize='-g -O3',
    cppflags='-D_REENTRANT -D_GNU_SOURCE -DDEBUGGING -fno-strict-aliasing -pipe -I/usr/local/include'
    ccversion='', gccversion='4.1.2 20061115 (prerelease) (Debian 4.1.1-21)', gccosandvers=''
    intsize=4, longsize=8, ptrsize=8, doublesize=8, byteorder=12345678
    d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=16
    ivtype='long', ivsize=8, nvtype='long double', nvsize=16, Off_t='off_t', lseeksize=8
    alignbytes=16, prototype=define
  Linker and Libraries:
    ld='gcc', ldflags =' -L/usr/local/lib'
    libpth=/usr/local/lib /lib /usr/lib /lib64 /usr/lib64
    libs=-lnsl -lgdbm -ldb -ldl -lm -lcrypt -lutil -lpthread -lc
    perllibs=-lnsl -ldl -lm -lcrypt -lutil -lpthread -lc
    libc=/lib/libc-2.3.6.so, so=so, useshrplib=true, libperl=libperl.so
    gnulibc_version='2.3.6'
  Dynamic Linking:
    dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E -Wl,-rpath,/opt/perl/5.10.0/lib/5.10.0/x86_64-linux-thread-multi-ld/CORE'
    cccdlflags='-fPIC', lddlflags='-shared -g -O3 -L/usr/local/lib'

Comments to Ask Bjørn Hansen at ask@perl.org | Group listing | About