Front page | perl.cpan.testers |
Postings from January 2008
FAIL Qt-0.03 x86_64-linux-thread-multi-ld 2.6.22.10
From:
imacat
Date:
January 4, 2008 12:51
Subject:
FAIL Qt-0.03 x86_64-linux-thread-multi-ld 2.6.22.10
This distribution has been tested as part of the cpan-testers
effort to test as many new uploads to CPAN as possible. See
http://testers.cpan.org/
Please cc any replies to cpan-testers@perl.org to keep other
test volunteers informed and to prevent any duplicate effort.
--
Dear Ashley Winters,
This is a computer-generated report for Qt-0.03
on perl-5.10.0, created automatically by CPAN-Reporter-1.0601
and sent to the CPAN Testers mailing list.
If you have received this email directly, it is because the person testing
your distribution chose to send a copy to your CPAN email address; there
may be a delay before the official report is received and processed
by CPAN Testers.
Thank you for uploading your work to CPAN. However, it appears that
there were some problems with your distribution. If these results are
not what you expect or if you would like to learn how to avoid FAIL
reports for missing dependencies, unsupported operating systems, etc.,
please consult "Notes for CPAN Authors" on the CPAN Testers Wiki:
http://cpantest.grango.org
Sections of this report:
* Tester comments
* Program output
* Prerequisites
* Environment and other context
------------------------------
TESTER COMMENTS
------------------------------
Additional comments from tester:
[none provided]
------------------------------
PROGRAM OUTPUT
------------------------------
Output from '/usr/bin/make':
cp Qt.pm blib/lib/Qt.pm
make[1]: Entering directory `/home/imacat/.cpan/build/Qt-0.03-qubZBS/QAccel'
cp QAccel.pm ../blib/lib/QAccel.pm
/opt/perl/5.10.0/bin/perl /opt/perl/5.10.0/lib/5.10.0/ExtUtils/xsubpp -typemap /opt/perl/5.10.0/lib/5.10.0/ExtUtils/typemap QAccel.xs > QAccel.xsc && mv QAccel.xsc QAccel.c
g++ -c -I/include -I../libperlqt/include -D_REENTRANT -D_GNU_SOURCE -DDEBUGGING -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -g -O3 -DVERSION=\"0.03\" -DXS_VERSION=\"0.03\" -fPIC "-I/opt/perl/5.10.0/lib/5.10.0/x86_64-linux-thread-multi-ld/CORE" QAccel.c
In file included from QAccel.xs:10:
../libperlqt/include/paccel.h:14:20: error: qaccel.h: ¨S¦³¦¹¤@ÀɮשΥؿý
In file included from ../libperlqt/include/paccel.h:15,
from QAccel.xs:10:
../libperlqt/include/pqt.h:21:21: error: qglobal.h: ¨S¦³¦¹¤@ÀɮשΥؿý
../libperlqt/include/pqt.h:22:22: error: qwindefs.h: ¨S¦³¦¹¤@ÀɮשΥؿý
In file included from QAccel.xs:11:
../libperlqt/include/sigslot.h:14:22: error: qmetaobj.h: ¨S¦³¦¹¤@ÀɮשΥؿý
../libperlqt/include/sigslot.h:15:21: error: qobject.h: ¨S¦³¦¹¤@ÀɮשΥؿý
In file included from ../libperlqt/include/pobject.h:18,
from ../libperlqt/include/sigslot.h:16,
from QAccel.xs:11:
../libperlqt/include/virtual.h:14:20: error: qevent.h: ¨S¦³¦¹¤@ÀɮשΥؿý
../libperlqt/include/paccel.h:17: error: expected class-name before '{' token
../libperlqt/include/paccel.h:19: error: expected `)' before '*' token
../libperlqt/include/virtual.h:30: error: 'QTimerEvent' has not been declared
../libperlqt/include/virtual.h:32: error: 'QMouseEvent' has not been declared
../libperlqt/include/virtual.h:33: error: 'QMouseEvent' has not been declared
../libperlqt/include/virtual.h:34: error: 'QMouseEvent' has not been declared
../libperlqt/include/virtual.h:35: error: 'QPaintEvent' has not been declared
../libperlqt/include/virtual.h:36: error: 'QResizeEvent' has not been declared
../libperlqt/include/pobject.h:21: error: expected class-name before ',' token
../libperlqt/include/pobject.h:23: error: expected `)' before '*' token
../libperlqt/include/pobject.h:27: error: 'QTimerEvent' has not been declared
../libperlqt/include/pobject.h:30: error: expected class-name before '{' token
../libperlqt/include/pobject.h:32: error: ISO C++ forbids declaration of 'QConnectionList' with no type
../libperlqt/include/pobject.h:32: error: expected ';' before '*' token
../libperlqt/include/pobject.h:35: error: expected `;' before 'void'
../libperlqt/include/pobject.h:36: error: 'QTimerEvent' has not been declared
../libperlqt/include/pobject.h: In member function 'void pObject::protected_initMetaObject()':
../libperlqt/include/pobject.h:35: error: 'initMetaObject' was not declared in this scope
../libperlqt/include/pobject.h: At global scope:
../libperlqt/include/pobject.h:40: error: expected initializer before '*' token
../libperlqt/include/sigslot.h:19: error: expected class-name before '{' token
../libperlqt/include/sigslot.h:34: error: ISO C++ forbids declaration of 'QMetaObject' with no type
../libperlqt/include/sigslot.h:34: error: expected ';' before '*' token
../libperlqt/include/sigslot.h:43: error: 'QMember' does not name a type
QAccel.c: In function 'void XS_QAccel_new(PerlInterpreter*, CV*)':
QAccel.c:40: error: 'QWidget' was not declared in this scope
QAccel.c:40: error: 'parent' was not declared in this scope
QAccel.c:40: error: expected primary-expression before ')' token
QAccel.c:40: error: expected `;' before 'extract_ptr'
QAccel.c:51: error: new initializer expression list treated as compound expression
QAccel.c: In function 'void XS_QAccel_clear(PerlInterpreter*, CV*)':
QAccel.c:72: error: 'QAccel' was not declared in this scope
QAccel.c:72: error: 'THIS' was not declared in this scope
QAccel.c:72: error: expected primary-expression before ')' token
QAccel.c:72: error: expected `;' before 'extract_ptr'
QAccel.c: In function 'void XS_QAccel_connectItem(PerlInterpreter*, CV*)':
QAccel.c:93: error: 'QObject' was not declared in this scope
QAccel.c:93: error: 'receiver' was not declared in this scope
QAccel.c:93: error: expected primary-expression before ')' token
QAccel.c:93: error: expected `;' before 'extract_ptr'
QAccel.c:94: error: 'QAccel' was not declared in this scope
QAccel.c:94: error: 'THIS' was not declared in this scope
QAccel.c:94: error: expected primary-expression before ')' token
QAccel.c:94: error: expected `;' before 'extract_ptr'
QAccel.xs:31: error: 'na' was not declared in this scope
QAccel.xs:33: error: 'SIGNAL_CODE' was not declared in this scope
QAccel.xs:33: error: 'SLOT_CODE' was not declared in this scope
QAccel.c: In function 'void XS_QAccel_count(PerlInterpreter*, CV*)':
QAccel.c:128: error: 'QAccel' was not declared in this scope
QAccel.c:128: error: 'THIS' was not declared in this scope
QAccel.c:128: error: expected primary-expression before ')' token
QAccel.c:128: error: expected `;' before 'extract_ptr'
QAccel.c: In function 'void XS_QAccel_disconnectItem(PerlInterpreter*, CV*)':
QAccel.c:152: error: 'QObject' was not declared in this scope
QAccel.c:152: error: 'reciever' was not declared in this scope
QAccel.c:152: error: expected primary-expression before ')' token
QAccel.c:152: error: expected `;' before 'extract_ptr'
QAccel.c:153: error: 'QAccel' was not declared in this scope
QAccel.c:153: error: 'THIS' was not declared in this scope
QAccel.c:153: error: expected primary-expression before ')' token
QAccel.c:153: error: expected `;' before 'extract_ptr'
QAccel.xs:53: error: 'na' was not declared in this scope
QAccel.xs:55: error: 'SIGNAL_CODE' was not declared in this scope
QAccel.xs:55: error: 'SLOT_CODE' was not declared in this scope
QAccel.c: In function 'void XS_QAccel_findKey(PerlInterpreter*, CV*)':
QAccel.c:183: error: 'QAccel' was not declared in this scope
QAccel.c:183: error: 'THIS' was not declared in this scope
QAccel.c:183: error: expected primary-expression before ')' token
QAccel.c:183: error: expected `;' before 'extract_ptr'
QAccel.c: In function 'void XS_QAccel_insertItem(PerlInterpreter*, CV*)':
QAccel.c:208: error: 'QAccel' was not declared in this scope
QAccel.c:208: error: 'THIS' was not declared in this scope
QAccel.c:208: error: expected primary-expression before ')' token
QAccel.c:208: error: expected `;' before 'extract_ptr'
QAccel.c: In function 'void XS_QAccel_isEnabled(PerlInterpreter*, CV*)':
QAccel.c:237: error: 'QAccel' was not declared in this scope
QAccel.c:237: error: 'THIS' was not declared in this scope
QAccel.c:237: error: expected primary-expression before ')' token
QAccel.c:237: error: expected `;' before 'extract_ptr'
QAccel.c: In function 'void XS_QAccel_isItemEnabled(PerlInterpreter*, CV*)':
QAccel.c:261: error: 'QAccel' was not declared in this scope
QAccel.c:261: error: 'THIS' was not declared in this scope
QAccel.c:261: error: expected primary-expression before ')' token
QAccel.c:261: error: expected `;' before 'extract_ptr'
QAccel.c: In function 'void XS_QAccel_key(PerlInterpreter*, CV*)':
QAccel.c:285: error: 'QAccel' was not declared in this scope
QAccel.c:285: error: 'THIS' was not declared in this scope
QAccel.c:285: error: expected primary-expression before ')' token
QAccel.c:285: error: expected `;' before 'extract_ptr'
QAccel.c: In function 'void XS_QAccel_removeItem(PerlInterpreter*, CV*)':
QAccel.c:309: error: 'QAccel' was not declared in this scope
QAccel.c:309: error: 'THIS' was not declared in this scope
QAccel.c:309: error: expected primary-expression before ')' token
QAccel.c:309: error: expected `;' before 'extract_ptr'
QAccel.c: In function 'void XS_QAccel_setEnabled(PerlInterpreter*, CV*)':
QAccel.c:330: error: 'QAccel' was not declared in this scope
QAccel.c:330: error: 'THIS' was not declared in this scope
QAccel.c:330: error: expected primary-expression before ')' token
QAccel.c:330: error: expected `;' before 'extract_ptr'
QAccel.c: In function 'void XS_QAccel_setItemEnabled(PerlInterpreter*, CV*)':
QAccel.c:352: error: 'QAccel' was not declared in this scope
QAccel.c:352: error: 'THIS' was not declared in this scope
QAccel.c:352: error: expected primary-expression before ')' token
QAccel.c:352: error: expected `;' before 'extract_ptr'
make[1]: *** [QAccel.o] Error 1
make[1]: Leaving directory `/home/imacat/.cpan/build/Qt-0.03-qubZBS/QAccel'
make: *** [subdirs] Error 2
------------------------------
PREREQUISITES
------------------------------
Prerequisite modules loaded:
No requirements found
------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------
Environment variables:
LANG = zh_TW
LANGUAGE = zh_TW
LC_ALL = zh_TW
LC_COLLATE = zh_TW
LC_CTYPE = zh_TW
LC_MESSAGES = zh_TW
LC_MONETARY = zh_TW
LC_NUMERIC = zh_TW
LC_TIME = zh_TW
PATH = /home/imacat/bin:/bin:/usr/bin:/opt/java/bin:/usr/local/bin
PERL5LIB = /home/imacat/lib/perl5
PERL5_CPANPLUS_IS_RUNNING = 14226
PERL5_CPAN_IS_EXECUTING = /home/imacat/.cpan/build/Qt-0.03-qubZBS/Makefile.PL
PERL5_CPAN_IS_RUNNING = 14226
SHELL = /bin/zsh
TERM = xterm
Perl special variables (and OS-specific diagnostics, for MSWin32):
$^X = /opt/perl/5.10.0/bin/perl
$UID/$EUID = 1000 / 1000
$GID = 100 0 4 6 20 24 25 29 34 38 40 44 46 50 100 104 1000
$EGID = 100 0 4 6 20 24 25 29 34 38 40 44 46 50 100 104 1000
Perl module toolchain versions installed:
Module Have
------------------- ---------
CPAN 1.9205
Cwd 3.2501
ExtUtils::CBuilder 0.21
ExtUtils::Command 1.13
ExtUtils::Install 1.44
ExtUtils::MakeMaker 6.42
ExtUtils::Manifest 1.51_01
ExtUtils::ParseXS 2.18_02
File::Spec 3.2501
Module::Build 0.2808_01
Module::Signature 0.55
Test::Harness 3.05
Test::More 0.74
YAML 0.66
YAML::Syck n/a
version 0.74
--
Summary of my perl5 (revision 5 version 10 subversion 0) configuration:
Platform:
osname=linux, osvers=2.6.22.10, archname=x86_64-linux-thread-multi-ld
uname='linux rinse 2.6.22.10 #1 smp tue nov 20 02:36:22 cst 2007 x86_64 gnulinux '
config_args='-d -Dusethreads -Dcc=gcc -Duselongdouble -Doptimize=-g -O3 -Duse64bitint -Duse64bitall -Dprefix=/opt/perl/5.10.0 -Dd_dosuid -Dinc_version_list=none -Duseshrplib=true -Dcf_email=imacat@mail.imacat.idv.tw'
hint=recommended, useposix=true, d_sigaction=define
useithreads=define, usemultiplicity=define
useperlio=define, d_sfio=undef, uselargefiles=define, usesocks=undef
use64bitint=define, use64bitall=define, uselongdouble=define
usemymalloc=n, bincompat5005=undef
Compiler:
cc='gcc', ccflags ='-D_REENTRANT -D_GNU_SOURCE -DDEBUGGING -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64',
optimize='-g -O3',
cppflags='-D_REENTRANT -D_GNU_SOURCE -DDEBUGGING -fno-strict-aliasing -pipe -I/usr/local/include'
ccversion='', gccversion='4.1.2 20061115 (prerelease) (Debian 4.1.1-21)', gccosandvers=''
intsize=4, longsize=8, ptrsize=8, doublesize=8, byteorder=12345678
d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=16
ivtype='long', ivsize=8, nvtype='long double', nvsize=16, Off_t='off_t', lseeksize=8
alignbytes=16, prototype=define
Linker and Libraries:
ld='gcc', ldflags =' -L/usr/local/lib'
libpth=/usr/local/lib /lib /usr/lib /lib64 /usr/lib64
libs=-lnsl -lgdbm -ldb -ldl -lm -lcrypt -lutil -lpthread -lc
perllibs=-lnsl -ldl -lm -lcrypt -lutil -lpthread -lc
libc=/lib/libc-2.3.6.so, so=so, useshrplib=true, libperl=libperl.so
gnulibc_version='2.3.6'
Dynamic Linking:
dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E -Wl,-rpath,/opt/perl/5.10.0/lib/5.10.0/x86_64-linux-thread-multi-ld/CORE'
cccdlflags='-fPIC', lddlflags='-shared -g -O3 -L/usr/local/lib'
-
FAIL Qt-0.03 x86_64-linux-thread-multi-ld 2.6.22.10
by imacat