develooper Front page | perl.cpan.testers | Postings from January 2008

FAIL NCustom-0.07 x86_64-linux-thread-multi-ld 2.6.22.10

From:
imacat
Date:
January 8, 2008 01:33
Subject:
FAIL NCustom-0.07 x86_64-linux-thread-multi-ld 2.6.22.10
This distribution has been tested as part of the cpan-testers
effort to test as many new uploads to CPAN as possible.  See
http://testers.cpan.org/

Please cc any replies to cpan-testers@perl.org to keep other
test volunteers informed and to prevent any duplicate effort.

--
Dear Bane Harbinger,
    
This is a computer-generated report for NCustom-0.07
on perl-5.10.0, created automatically by CPAN-Reporter-1.0601 
and sent to the CPAN Testers mailing list.  

If you have received this email directly, it is because the person testing 
your distribution chose to send a copy to your CPAN email address; there 
may be a delay before the official report is received and processed 
by CPAN Testers.

Thank you for uploading your work to CPAN.  However, it appears that
there were some problems with your distribution.  If these results are 
not what you expect or if you would like to learn how to avoid FAIL 
reports for missing dependencies, unsupported operating systems, etc.,
please consult "Notes for CPAN Authors" on the CPAN Testers Wiki: 
http://cpantest.grango.org

Sections of this report:

    * Tester comments
    * Program output
    * Prerequisites
    * Environment and other context

------------------------------
TESTER COMMENTS
------------------------------

Additional comments from tester: 

[none provided]

------------------------------
PROGRAM OUTPUT
------------------------------

Output from '/usr/bin/make test':

make: pod2test: Command not found
make: [testifypods] Error 127 (ignored)
make: pod2test: Command not found
make: [testifypods] Error 127 (ignored)
make: pod2test: Command not found
make: [testifypods] Error 127 (ignored)
PERL_DL_NONLAZY=1 /opt/perl/5.10.0/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
t/embedded-bin-ncustom.........Can't open perl script "/home/imacat/.cpan/build/NCustom-0.07-j1B5y7/t/embedded-bin-ncustom.o/test5.ncus": ©Úµ´¤£²ÅÅv­­ªº¾Þ§@
ncustom_try_dir: system call=/home/imacat/.cpan/build/NCustom-0.07-j1B5y7/t/embedded-bin-ncustom.o/test5.ncus : error=3328
 at ./bin/ncustom line 335
Can't open perl script "/home/imacat/.cpan/build/NCustom-0.07-j1B5y7/t/embedded-bin-ncustom.o/test6.ncus": ©Úµ´¤£²ÅÅv­­ªº¾Þ§@
ncustom_try_dir: system call=/home/imacat/.cpan/build/NCustom-0.07-j1B5y7/t/embedded-bin-ncustom.o/test6.ncus : error=3328
 at ./bin/ncustom line 335
undo_files: dir doesnt exist: /home/imacat/.cpan/build/NCustom-0.07-j1B5y7/t/embedded-bin-ncustom.o/.ncustom/save/test6.ncus. at ./bin/ncustom line 268
# TEST:<undo> undoes transactions
ncustom: cant find/execute "test3.ncus".
 at ./bin/ncustom line 335
ncustom: cant find/execute "http://install/install/NCustom/test4.ncus".
 at ./bin/ncustom line 335

#   Failed test at bin/ncustom line 322.
# TEST:<ncustom> fetches and executes file from default url

#   Failed test at bin/ncustom line 324.
# TEST:<ncustom> fetches and executes file from given url
# Looks like you failed 2 tests of 23.
 Dubious, test returned 2 (wstat 512, 0x200)
 Failed 2/23 subtests 
t/embedded-NCustom-Config......
#   Failed test at lib/NCustom/Config.pm line 87.
# TEST:<get_url> fetches file into dir from url

#   Failed test at lib/NCustom/Config.pm line 89.
# TEST:<get_url> returns success when successful
# Looks like you failed 2 tests of 5.
 Dubious, test returned 2 (wstat 512, 0x200)
 Failed 2/5 subtests 
t/embedded-NCustom.............
#   Failed test at lib/NCustom.pm line 282.
# TEST:<crud_gaurantee> says if you can update a file.

#   Failed test at lib/NCustom.pm line 300.
# TEST:<crud_gaurantee> says if you can ru a file (short notation).
rpm: /usr/lib/libcrypto.so.0.9.8: no version information available (required by /usr/lib/libneon.so.25)
rpm: /usr/lib/libssl.so.0.9.8: no version information available (required by /usr/lib/libneon.so.25)
/usr/lib/rpm/rpmq: /usr/lib/libcrypto.so.0.9.8: no version information available (required by /usr/lib/libneon.so.25)
/usr/lib/rpm/rpmq: /usr/lib/libssl.so.0.9.8: no version information available (required by /usr/lib/libneon.so.25)
rpm: To install rpm packages on Debian systems, use alien. See README.Debian.
error: cannot open Packages index using db3 - ¨S¦³¦¹¤@ÀɮשΥؿý (2)
error: cannot open Packages database in /var/lib/rpm
rpm: /usr/lib/libcrypto.so.0.9.8: no version information available (required by /usr/lib/libneon.so.25)
rpm: /usr/lib/libssl.so.0.9.8: no version information available (required by /usr/lib/libneon.so.25)
/usr/lib/rpm/rpmq: /usr/lib/libcrypto.so.0.9.8: no version information available (required by /usr/lib/libneon.so.25)
/usr/lib/rpm/rpmq: /usr/lib/libssl.so.0.9.8: no version information available (required by /usr/lib/libneon.so.25)
rpm: To install rpm packages on Debian systems, use alien. See README.Debian.
error: cannot open Packages index using db3 - ¨S¦³¦¹¤@ÀɮשΥؿý (2)
error: cannot open Packages database in /var/lib/rpm
rpm: /usr/lib/libcrypto.so.0.9.8: no version information available (required by /usr/lib/libneon.so.25)
rpm: /usr/lib/libssl.so.0.9.8: no version information available (required by /usr/lib/libneon.so.25)
/usr/lib/rpm/rpmq: /usr/lib/libcrypto.so.0.9.8: no version information available (required by /usr/lib/libneon.so.25)
/usr/lib/rpm/rpmq: /usr/lib/libssl.so.0.9.8: no version information available (required by /usr/lib/libneon.so.25)
rpm: To install rpm packages on Debian systems, use alien. See README.Debian.
error: cannot open Packages index using db3 - ¨S¦³¦¹¤@ÀɮשΥؿý (2)
error: cannot open Packages database in /var/lib/rpm
rpm: /usr/lib/libcrypto.so.0.9.8: no version information available (required by /usr/lib/libneon.so.25)
rpm: /usr/lib/libssl.so.0.9.8: no version information available (required by /usr/lib/libneon.so.25)
/usr/lib/rpm/rpmq: /usr/lib/libcrypto.so.0.9.8: no version information available (required by /usr/lib/libneon.so.25)
/usr/lib/rpm/rpmq: /usr/lib/libssl.so.0.9.8: no version information available (required by /usr/lib/libneon.so.25)
rpm: To install rpm packages on Debian systems, use alien. See README.Debian.
error: cannot open Packages index using db3 - ¨S¦³¦¹¤@ÀɮשΥؿý (2)
error: cannot open Packages database in /var/lib/rpm
rpm: /usr/lib/libcrypto.so.0.9.8: no version information available (required by /usr/lib/libneon.so.25)
rpm: /usr/lib/libssl.so.0.9.8: no version information available (required by /usr/lib/libneon.so.25)
rpm: To install rpm packages on Debian systems, use alien. See README.Debian.
error: cannot open Packages index using db3 - ¨S¦³¦¹¤@ÀɮשΥؿý (2)
error: cannot open Packages database in /var/lib/rpm
rpm: /usr/lib/libcrypto.so.0.9.8: no version information available (required by /usr/lib/libneon.so.25)
rpm: /usr/lib/libssl.so.0.9.8: no version information available (required by /usr/lib/libneon.so.25)
/usr/lib/rpm/rpmq: /usr/lib/libcrypto.so.0.9.8: no version information available (required by /usr/lib/libneon.so.25)
/usr/lib/rpm/rpmq: /usr/lib/libssl.so.0.9.8: no version information available (required by /usr/lib/libneon.so.25)
rpm: To install rpm packages on Debian systems, use alien. See README.Debian.
error: cannot open Packages index using db3 - ¨S¦³¦¹¤@ÀɮשΥؿý (2)
error: cannot open Packages database in /var/lib/rpm

#   Failed test at lib/NCustom.pm line 1256.
#          got: 'MISSING'
#     expected: 'OK'
# TEST:<check_pkg> checks if package meets minimum version 2/4
rpm: /usr/lib/libcrypto.so.0.9.8: no version information available (required by /usr/lib/libneon.so.25)
rpm: /usr/lib/libssl.so.0.9.8: no version information available (required by /usr/lib/libneon.so.25)
/usr/lib/rpm/rpmq: /usr/lib/libcrypto.so.0.9.8: no version information available (required by /usr/lib/libneon.so.25)
/usr/lib/rpm/rpmq: /usr/lib/libssl.so.0.9.8: no version information available (required by /usr/lib/libneon.so.25)
rpm: To install rpm packages on Debian systems, use alien. See README.Debian.
error: cannot open Packages index using db3 - ¨S¦³¦¹¤@ÀɮשΥؿý (2)
error: cannot open Packages database in /var/lib/rpm

#   Failed test at lib/NCustom.pm line 1259.
#          got: 'MISSING'
#     expected: 'OK'
# TEST:<check_pkg> checks if package meets minimum version 3/4
rpm: /usr/lib/libcrypto.so.0.9.8: no version information available (required by /usr/lib/libneon.so.25)
rpm: /usr/lib/libssl.so.0.9.8: no version information available (required by /usr/lib/libneon.so.25)
/usr/lib/rpm/rpmq: /usr/lib/libcrypto.so.0.9.8: no version information available (required by /usr/lib/libneon.so.25)
/usr/lib/rpm/rpmq: /usr/lib/libssl.so.0.9.8: no version information available (required by /usr/lib/libneon.so.25)
rpm: To install rpm packages on Debian systems, use alien. See README.Debian.
error: cannot open Packages index using db3 - ¨S¦³¦¹¤@ÀɮשΥؿý (2)
error: cannot open Packages database in /var/lib/rpm

#   Failed test at lib/NCustom.pm line 1262.
#          got: 'MISSING'
#     expected: 'BELOW'
# TEST:<check_pkg> checks if package meets minimum version 4/4
rpm: /usr/lib/libcrypto.so.0.9.8: no version information available (required by /usr/lib/libneon.so.25)
rpm: /usr/lib/libssl.so.0.9.8: no version information available (required by /usr/lib/libneon.so.25)
/usr/lib/rpm/rpmq: /usr/lib/libcrypto.so.0.9.8: no version information available (required by /usr/lib/libneon.so.25)
/usr/lib/rpm/rpmq: /usr/lib/libssl.so.0.9.8: no version information available (required by /usr/lib/libneon.so.25)
rpm: To install rpm packages on Debian systems, use alien. See README.Debian.
error: cannot open Packages index using db3 - ¨S¦³¦¹¤@ÀɮשΥؿý (2)
error: cannot open Packages database in /var/lib/rpm

#   Failed test at lib/NCustom.pm line 1266.
#          got: 'MISSING'
#     expected: 'ABOVE'
# TEST:<check_pkg> checks if package meets maximum version 2/4
rpm: /usr/lib/libcrypto.so.0.9.8: no version information available (required by /usr/lib/libneon.so.25)
rpm: /usr/lib/libssl.so.0.9.8: no version information available (required by /usr/lib/libneon.so.25)
/usr/lib/rpm/rpmq: /usr/lib/libcrypto.so.0.9.8: no version information available (required by /usr/lib/libneon.so.25)
/usr/lib/rpm/rpmq: /usr/lib/libssl.so.0.9.8: no version information available (required by /usr/lib/libneon.so.25)
rpm: To install rpm packages on Debian systems, use alien. See README.Debian.
error: cannot open Packages index using db3 - ¨S¦³¦¹¤@ÀɮשΥؿý (2)
error: cannot open Packages database in /var/lib/rpm

#   Failed test at lib/NCustom.pm line 1269.
#          got: 'MISSING'
#     expected: 'OK'
# TEST:<check_pkg> checks if package meets maximum version 3/4
rpm: /usr/lib/libcrypto.so.0.9.8: no version information available (required by /usr/lib/libneon.so.25)
rpm: /usr/lib/libssl.so.0.9.8: no version information available (required by /usr/lib/libneon.so.25)
/usr/lib/rpm/rpmq: /usr/lib/libcrypto.so.0.9.8: no version information available (required by /usr/lib/libneon.so.25)
/usr/lib/rpm/rpmq: /usr/lib/libssl.so.0.9.8: no version information available (required by /usr/lib/libneon.so.25)
rpm: To install rpm packages on Debian systems, use alien. See README.Debian.
error: cannot open Packages index using db3 - ¨S¦³¦¹¤@ÀɮשΥؿý (2)
error: cannot open Packages database in /var/lib/rpm

#   Failed test at lib/NCustom.pm line 1272.
#          got: 'MISSING'
#     expected: 'OK'
# TEST:<check_pkg> checks if package meets maximum version 4/4
rpm: /usr/lib/libcrypto.so.0.9.8: no version information available (required by /usr/lib/libneon.so.25)
rpm: /usr/lib/libssl.so.0.9.8: no version information available (required by /usr/lib/libneon.so.25)
/usr/lib/rpm/rpmq: /usr/lib/libcrypto.so.0.9.8: no version information available (required by /usr/lib/libneon.so.25)
/usr/lib/rpm/rpmq: /usr/lib/libssl.so.0.9.8: no version information available (required by /usr/lib/libneon.so.25)
rpm: To install rpm packages on Debian systems, use alien. See README.Debian.
error: cannot open Packages index using db3 - ¨S¦³¦¹¤@ÀɮשΥؿý (2)
error: cannot open Packages database in /var/lib/rpm

#   Failed test at lib/NCustom.pm line 1276.
#          got: 'MISSING'
#     expected: 'ABOVE'
# TEST:<check_pkg> checks if package meets exact version 2/4
rpm: /usr/lib/libcrypto.so.0.9.8: no version information available (required by /usr/lib/libneon.so.25)
rpm: /usr/lib/libssl.so.0.9.8: no version information available (required by /usr/lib/libneon.so.25)
/usr/lib/rpm/rpmq: /usr/lib/libcrypto.so.0.9.8: no version information available (required by /usr/lib/libneon.so.25)
/usr/lib/rpm/rpmq: /usr/lib/libssl.so.0.9.8: no version information available (required by /usr/lib/libneon.so.25)
rpm: To install rpm packages on Debian systems, use alien. See README.Debian.
error: cannot open Packages index using db3 - ¨S¦³¦¹¤@ÀɮשΥؿý (2)
error: cannot open Packages database in /var/lib/rpm

#   Failed test at lib/NCustom.pm line 1279.
#          got: 'MISSING'
#     expected: 'OK'
# TEST:<check_pkg> checks if package meets exact version 3/4
rpm: /usr/lib/libcrypto.so.0.9.8: no version information available (required by /usr/lib/libneon.so.25)
rpm: /usr/lib/libssl.so.0.9.8: no version information available (required by /usr/lib/libneon.so.25)
/usr/lib/rpm/rpmq: /usr/lib/libcrypto.so.0.9.8: no version information available (required by /usr/lib/libneon.so.25)
/usr/lib/rpm/rpmq: /usr/lib/libssl.so.0.9.8: no version information available (required by /usr/lib/libneon.so.25)
rpm: To install rpm packages on Debian systems, use alien. See README.Debian.
error: cannot open Packages index using db3 - ¨S¦³¦¹¤@ÀɮשΥؿý (2)
error: cannot open Packages database in /var/lib/rpm

#   Failed test at lib/NCustom.pm line 1282.
#          got: 'MISSING'
#     expected: 'BELOW'
# TEST:<check_pkg> checks if package meets exact version 4/4
rpm: /usr/lib/libcrypto.so.0.9.8: no version information available (required by /usr/lib/libneon.so.25)
rpm: /usr/lib/libssl.so.0.9.8: no version information available (required by /usr/lib/libneon.so.25)
/usr/lib/rpm/rpmq: /usr/lib/libcrypto.so.0.9.8: no version information available (required by /usr/lib/libneon.so.25)
/usr/lib/rpm/rpmq: /usr/lib/libssl.so.0.9.8: no version information available (required by /usr/lib/libneon.so.25)
rpm: To install rpm packages on Debian systems, use alien. See README.Debian.
error: cannot open Packages index using db3 - ¨S¦³¦¹¤@ÀɮשΥؿý (2)
error: cannot open Packages database in /var/lib/rpm

#   Failed test at lib/NCustom.pm line 1286.
#          got: 'OK'
#     expected: 'UNWELCOME'
# TEST:<check_pkg> checks if package present 2/4
rpm: /usr/lib/libcrypto.so.0.9.8: no version information available (required by /usr/lib/libneon.so.25)
rpm: /usr/lib/libssl.so.0.9.8: no version information available (required by /usr/lib/libneon.so.25)
/usr/lib/rpm/rpmq: /usr/lib/libcrypto.so.0.9.8: no version information available (required by /usr/lib/libneon.so.25)
/usr/lib/rpm/rpmq: /usr/lib/libssl.so.0.9.8: no version information available (required by /usr/lib/libneon.so.25)
rpm: To install rpm packages on Debian systems, use alien. See README.Debian.
error: cannot open Packages index using db3 - ¨S¦³¦¹¤@ÀɮשΥؿý (2)
error: cannot open Packages database in /var/lib/rpm

#   Failed test at lib/NCustom.pm line 1289.
#          got: 'OK'
#     expected: 'UNWELCOME'
# TEST:<check_pkg> checks if package present 3/4
rpm: /usr/lib/libcrypto.so.0.9.8: no version information available (required by /usr/lib/libneon.so.25)
rpm: /usr/lib/libssl.so.0.9.8: no version information available (required by /usr/lib/libneon.so.25)
/usr/lib/rpm/rpmq: /usr/lib/libcrypto.so.0.9.8: no version information available (required by /usr/lib/libneon.so.25)
/usr/lib/rpm/rpmq: /usr/lib/libssl.so.0.9.8: no version information available (required by /usr/lib/libneon.so.25)
rpm: To install rpm packages on Debian systems, use alien. See README.Debian.
error: cannot open Packages index using db3 - ¨S¦³¦¹¤@ÀɮשΥؿý (2)
error: cannot open Packages database in /var/lib/rpm

#   Failed test at lib/NCustom.pm line 1292.
#          got: 'OK'
#     expected: 'UNWELCOME'
# TEST:<check_pkg> checks if package present 4/4

#   Failed test at lib/NCustom.pm line 460.
#          got: '0'
#     expected: '1'
#   TEST:<save_files> if a file is saved to an archive, and it is already there:
#   TEST:	  - the file will be saved with a suffix

#   Failed test at lib/NCustom.pm line 469.
#          got: '0'
#     expected: '1'
#   TEST:<save_files> if a file is saved to an archive, and it is already there:
#   TEST:   - if there is no change it wont be saved again

#   Failed test at lib/NCustom.pm line 739.
#          got: '1'
#     expected: '0'
#   TEST:<overwrite_file> 
#   TEST:   - will strip a given pattern from the text
# commit_file: Cant clobber existing plain-file: /home/imacat/.cpan/build/NCustom-0.07-j1B5y7/t/embedded-NCustom.o/dir6/file2. at lib/NCustom.pm line 707

#   Failed test at lib/NCustom.pm line 894.
#          got: '1'
#     expected: '0'
#   TEST:<append_file> 
#   TEST:   - will strip a given pattern from the text
# commit_file: Cant clobber existing plain-file: /home/imacat/.cpan/build/NCustom-0.07-j1B5y7/t/embedded-NCustom.o/dir7/file2. at lib/NCustom.pm line 873

#   Failed test at lib/NCustom.pm line 959.
#          got: '1'
#     expected: '0'
#   TEST:<prepend_file> 
#   TEST:   - will strip a given pattern from the text
# commit_file: Cant clobber existing plain-file: /home/imacat/.cpan/build/NCustom-0.07-j1B5y7/t/embedded-NCustom.o/dir8/file2. at lib/NCustom.pm line 937

#   Failed test at lib/NCustom.pm line 1032.
#          got: '1'
#     expected: '0'
#   TEST:<edit_file> 
#   TEST:   - simple edit file

#   Failed test at lib/NCustom.pm line 1038.
#          got: '1'
#     expected: '0'
#   TEST:<edit_file> 
#   TEST:   - multi substitution edit

#   Failed test at lib/NCustom.pm line 1043.
#          got: '1'
#     expected: '0'
# TEST:<edit_file> - edits multiple files 1/3.

#   Failed test at lib/NCustom.pm line 1045.
#          got: '1'
#     expected: '0'
# TEST:<edit_file> - edits multiple files 2/3.

#   Failed test at lib/NCustom.pm line 1047.
#          got: '1'
#     expected: '0'
# TEST:<edit_file> - edits multiple files 3/3.
# commit_file: Cant clobber existing plain-file: /home/imacat/.cpan/build/NCustom-0.07-j1B5y7/t/embedded-NCustom.o/dir9/file1. at lib/NCustom.pm line 1000
# commit_file: Cant clobber existing plain-file: /home/imacat/.cpan/build/NCustom-0.07-j1B5y7/t/embedded-NCustom.o/dir9/file2. at lib/NCustom.pm line 1002
# commit_file: Cant clobber existing plain-file: /home/imacat/.cpan/build/NCustom-0.07-j1B5y7/t/embedded-NCustom.o/dir9/file3. at lib/NCustom.pm line 1012
# commit_file: Cant clobber existing plain-file: /home/imacat/.cpan/build/NCustom-0.07-j1B5y7/t/embedded-NCustom.o/dir10/file1. at lib/NCustom.pm line 1012
# commit_file: Cant clobber existing plain-file: /home/imacat/.cpan/build/NCustom-0.07-j1B5y7/t/embedded-NCustom.o/dir10/file2. at lib/NCustom.pm line 1012
rpm: /usr/lib/libcrypto.so.0.9.8: no version information available (required by /usr/lib/libneon.so.25)
rpm: /usr/lib/libssl.so.0.9.8: no version information available (required by /usr/lib/libneon.so.25)
/usr/lib/rpm/rpmq: /usr/lib/libcrypto.so.0.9.8: no version information available (required by /usr/lib/libneon.so.25)
/usr/lib/rpm/rpmq: /usr/lib/libssl.so.0.9.8: no version information available (required by /usr/lib/libneon.so.25)
rpm: To install rpm packages on Debian systems, use alien. See README.Debian.
error: cannot open Packages index using db3 - ¨S¦³¦¹¤@ÀɮשΥؿý (2)
error: cannot open Packages database in /var/lib/rpm
rpm: /usr/lib/libcrypto.so.0.9.8: no version information available (required by /usr/lib/libneon.so.25)
rpm: /usr/lib/libssl.so.0.9.8: no version information available (required by /usr/lib/libneon.so.25)
/usr/lib/rpm/rpmq: /usr/lib/libcrypto.so.0.9.8: no version information available (required by /usr/lib/libneon.so.25)
/usr/lib/rpm/rpmq: /usr/lib/libssl.so.0.9.8: no version information available (required by /usr/lib/libneon.so.25)
rpm: To install rpm packages on Debian systems, use alien. See README.Debian.
error: cannot open Packages index using db3 - ¨S¦³¦¹¤@ÀɮשΥؿý (2)
error: cannot open Packages database in /var/lib/rpm
rpm: /usr/lib/libcrypto.so.0.9.8: no version information available (required by /usr/lib/libneon.so.25)
rpm: /usr/lib/libssl.so.0.9.8: no version information available (required by /usr/lib/libneon.so.25)
/usr/lib/rpm/rpmq: /usr/lib/libcrypto.so.0.9.8: no version information available (required by /usr/lib/libneon.so.25)
/usr/lib/rpm/rpmq: /usr/lib/libssl.so.0.9.8: no version information available (required by /usr/lib/libneon.so.25)
rpm: To install rpm packages on Debian systems, use alien. See README.Debian.
error: cannot open Packages index using db3 - ¨S¦³¦¹¤@ÀɮשΥؿý (2)
error: cannot open Packages database in /var/lib/rpm
rpm: /usr/lib/libcrypto.so.0.9.8: no version information available (required by /usr/lib/libneon.so.25)
rpm: /usr/lib/libssl.so.0.9.8: no version information available (required by /usr/lib/libneon.so.25)
/usr/lib/rpm/rpmq: /usr/lib/libcrypto.so.0.9.8: no version information available (required by /usr/lib/libneon.so.25)
/usr/lib/rpm/rpmq: /usr/lib/libssl.so.0.9.8: no version information available (required by /usr/lib/libneon.so.25)
rpm: To install rpm packages on Debian systems, use alien. See README.Debian.
error: cannot open Packages index using db3 - ¨S¦³¦¹¤@ÀɮשΥؿý (2)
error: cannot open Packages database in /var/lib/rpm

#   Failed test at lib/NCustom.pm line 1404.
#                   'As EXACTLY version 9.9.9 of acme was MISSING - we are going to fetch FILE from URL and execute it.
# This should set things right.
# '
#     doesn't match '(?-xism:Dont be stupid)'
# TEST:<required_packages> executes simple statements

#   Failed test at lib/NCustom.pm line 1406.
#                   'As EXACTLY version 9.9.9 of acme was MISSING - we are going to fetch FILE from URL and execute it.
# This should set things right.
# '
#     doesn't match '(?-xism:Hello9)'
# TEST:<required_packages> executes compound statements
# Looks like you failed 26 tests of 137.
 Dubious, test returned 26 (wstat 6656, 0x1a00)
 Failed 26/137 subtests 
	(less 6 skipped subtests: 105 okay)
	(1 TODO test unexpectedly succeeded)
t/general......................ok

Test Summary Report
-------------------
t/embedded-bin-ncustom.t   (Wstat: 512 Tests: 23 Failed: 2)
  Failed tests:  19-20
  Non-zero exit status: 2
t/embedded-NCustom-Config.t (Wstat: 512 Tests: 5 Failed: 2)
  Failed tests:  3-4
  Non-zero exit status: 2
t/embedded-NCustom.t       (Wstat: 6656 Tests: 137 Failed: 26)
  Failed tests:  14, 21, 32-43, 80-81, 89, 94, 99, 103-107
                123-124
  TODO passed:   9
  Non-zero exit status: 26
Files=4, Tests=166,  4 wallclock secs ( 0.08 usr  0.02 sys +  2.98 cusr  0.81 csys =  3.89 CPU)
Result: FAIL
Failed 3/4 test programs. 30/166 subtests failed.
make: *** [test_dynamic] Error 255

------------------------------
PREREQUISITES
------------------------------

Prerequisite modules loaded:

    No requirements found

------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------

Environment variables:

    LANG = zh_TW
    LANGUAGE = zh_TW
    LC_ALL = zh_TW
    LC_COLLATE = zh_TW
    LC_CTYPE = zh_TW
    LC_MESSAGES = zh_TW
    LC_MONETARY = zh_TW
    LC_NUMERIC = zh_TW
    LC_TIME = zh_TW
    PATH = /home/imacat/bin:/bin:/usr/bin:/opt/java/bin:/usr/local/bin
    PERL5LIB = /home/imacat/lib/perl5
    PERL5_CPANPLUS_IS_RUNNING = 16872
    PERL5_CPAN_IS_RUNNING = 16872
    SHELL = /bin/zsh
    TERM = xterm

Perl special variables (and OS-specific diagnostics, for MSWin32):

    $^X = /opt/perl/5.10.0/bin/perl
    $UID/$EUID = 1000 / 1000
    $GID = 100 0 4 6 20 24 25 29 34 38 40 44 46 50 100 104 1000
    $EGID = 100 0 4 6 20 24 25 29 34 38 40 44 46 50 100 104 1000

Perl module toolchain versions installed:

    Module              Have     
    ------------------- ---------
    CPAN                1.9205   
    Cwd                 3.2501   
    ExtUtils::CBuilder  0.21     
    ExtUtils::Command   1.13     
    ExtUtils::Install   1.44     
    ExtUtils::MakeMaker 6.42     
    ExtUtils::Manifest  1.51_01  
    ExtUtils::ParseXS   2.18_02  
    File::Spec          3.2501   
    Module::Build       0.2808_01
    Module::Signature   0.55     
    Test::Harness       3.06     
    Test::More          0.74     
    YAML                0.66     
    YAML::Syck          n/a      
    version             0.74     


--

Summary of my perl5 (revision 5 version 10 subversion 0) configuration:
  Platform:
    osname=linux, osvers=2.6.22.10, archname=x86_64-linux-thread-multi-ld
    uname='linux rinse 2.6.22.10 #1 smp tue nov 20 02:36:22 cst 2007 x86_64 gnulinux '
    config_args='-d -Dusethreads -Dcc=gcc -Duselongdouble -Doptimize=-g -O3 -Duse64bitint -Duse64bitall -Dprefix=/opt/perl/5.10.0 -Dd_dosuid -Dinc_version_list=none -Duseshrplib=true -Dcf_email=imacat@mail.imacat.idv.tw'
    hint=recommended, useposix=true, d_sigaction=define
    useithreads=define, usemultiplicity=define
    useperlio=define, d_sfio=undef, uselargefiles=define, usesocks=undef
    use64bitint=define, use64bitall=define, uselongdouble=define
    usemymalloc=n, bincompat5005=undef
  Compiler:
    cc='gcc', ccflags ='-D_REENTRANT -D_GNU_SOURCE -DDEBUGGING -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64',
    optimize='-g -O3',
    cppflags='-D_REENTRANT -D_GNU_SOURCE -DDEBUGGING -fno-strict-aliasing -pipe -I/usr/local/include'
    ccversion='', gccversion='4.1.2 20061115 (prerelease) (Debian 4.1.1-21)', gccosandvers=''
    intsize=4, longsize=8, ptrsize=8, doublesize=8, byteorder=12345678
    d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=16
    ivtype='long', ivsize=8, nvtype='long double', nvsize=16, Off_t='off_t', lseeksize=8
    alignbytes=16, prototype=define
  Linker and Libraries:
    ld='gcc', ldflags =' -L/usr/local/lib'
    libpth=/usr/local/lib /lib /usr/lib /lib64 /usr/lib64
    libs=-lnsl -lgdbm -ldb -ldl -lm -lcrypt -lutil -lpthread -lc
    perllibs=-lnsl -ldl -lm -lcrypt -lutil -lpthread -lc
    libc=/lib/libc-2.3.6.so, so=so, useshrplib=true, libperl=libperl.so
    gnulibc_version='2.3.6'
  Dynamic Linking:
    dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E -Wl,-rpath,/opt/perl/5.10.0/lib/5.10.0/x86_64-linux-thread-multi-ld/CORE'
    cccdlflags='-fPIC', lddlflags='-shared -g -O3 -L/usr/local/lib'

Comments to Ask Bjørn Hansen at ask@perl.org | Group listing | About