FAIL P2P-Transmission-0.02 OpenBSD.i386-openbsd-thread-multi-64int4.2

This distribution has been tested as part of the cpan-testers
effort to test as many new uploads to CPAN as possible.  See
http://testers.cpan.org/

Please cc any replies to cpan-testers@perl.org to keep other
test volunteers informed and to prevent any duplicate effort.

--

Dear BGILMORE,
    
This is a computer-generated error report created automatically by
CPANPLUS, version 0.84. Testers personal comments may appear 
at the end of this report.


Thank you for uploading your work to CPAN.  However, it appears that
there were some problems testing your distribution.

TEST RESULTS:

Below is the error stack from stage 'make test':

[MSG] [Sat Jan 12 01:40:24 2008] Trying to get 'http://www.cpan.org/authors/id/B/BG/BGILMORE/P2P-Transmission-0.02.tar.gz'
[MSG] [Sat Jan 12 01:40:27 2008] Trying to get 'http://www.cpan.org/authors/id/B/BG/BGILMORE/CHECKSUMS'
[MSG] [Sat Jan 12 01:40:28 2008] Checksum matches for 'P2P-Transmission-0.02.tar.gz'
[MSG] [Sat Jan 12 01:40:28 2008] Extracted 'P2P-Transmission-0.02/'
[MSG] [Sat Jan 12 01:40:28 2008] Extracted 'P2P-Transmission-0.02/Changes'
[MSG] [Sat Jan 12 01:40:28 2008] Extracted 'P2P-Transmission-0.02/lib/'
[MSG] [Sat Jan 12 01:40:28 2008] Extracted 'P2P-Transmission-0.02/lib/P2P/'
[MSG] [Sat Jan 12 01:40:28 2008] Extracted 'P2P-Transmission-0.02/lib/P2P/Transmission/'
[MSG] [Sat Jan 12 01:40:28 2008] Extracted 'P2P-Transmission-0.02/lib/P2P/Transmission/Torrent.pm'
[MSG] [Sat Jan 12 01:40:28 2008] Extracted 'P2P-Transmission-0.02/lib/P2P/Transmission.pm'
[MSG] [Sat Jan 12 01:40:28 2008] Extracted 'P2P-Transmission-0.02/Makefile.PL'
[MSG] [Sat Jan 12 01:40:28 2008] Extracted 'P2P-Transmission-0.02/MANIFEST'
[MSG] [Sat Jan 12 01:40:28 2008] Extracted 'P2P-Transmission-0.02/META.yml'
[MSG] [Sat Jan 12 01:40:28 2008] Extracted 'P2P-Transmission-0.02/README'
[MSG] [Sat Jan 12 01:40:28 2008] Extracted 'P2P-Transmission-0.02/t/'
[MSG] [Sat Jan 12 01:40:28 2008] Extracted 'P2P-Transmission-0.02/t/P2P-Transmission.t'
[MSG] [Sat Jan 12 01:40:28 2008] Extracted 'P2P::Transmission' to '/home/cpan/perl5.10.0/.cpanplus/5.10.0/build/P2P-Transmission-0.02'
[MSG] [Sat Jan 12 01:40:29 2008] Checking if your kit is complete...
Looks good
Warning: prerequisite Convert::Bencode 1.03 not found.
Writing Makefile for P2P::Transmission

[MSG] [Sat Jan 12 01:40:29 2008] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value'
[MSG] [Sat Jan 12 01:40:29 2008] Module 'P2P::Transmission' requires 'Convert::Bencode' version '1.03' to be installed 
[MSG] [Sat Jan 12 01:40:29 2008] Trying to get 'http://www.cpan.org/authors/id/O/OR/ORCLEV/CHECKSUMS'
[MSG] [Sat Jan 12 01:40:30 2008] Checksum matches for 'Convert-Bencode-1.03.tar.gz'
[MSG] [Sat Jan 12 01:40:30 2008] Extracted 'Convert-Bencode-1.03/'
[MSG] [Sat Jan 12 01:40:30 2008] Extracted 'Convert-Bencode-1.03/lib/'
[MSG] [Sat Jan 12 01:40:30 2008] Extracted 'Convert-Bencode-1.03/lib/Convert/'
[MSG] [Sat Jan 12 01:40:30 2008] Extracted 'Convert-Bencode-1.03/lib/Convert/Bencode.pm'
[MSG] [Sat Jan 12 01:40:30 2008] Extracted 'Convert-Bencode-1.03/t/'
[MSG] [Sat Jan 12 01:40:30 2008] Extracted 'Convert-Bencode-1.03/t/001_basic.t'
[MSG] [Sat Jan 12 01:40:30 2008] Extracted 'Convert-Bencode-1.03/scripts/'
[MSG] [Sat Jan 12 01:40:30 2008] Extracted 'Convert-Bencode-1.03/LICENSE'
[MSG] [Sat Jan 12 01:40:30 2008] Extracted 'Convert-Bencode-1.03/README'
[MSG] [Sat Jan 12 01:40:30 2008] Extracted 'Convert-Bencode-1.03/Todo'
[MSG] [Sat Jan 12 01:40:30 2008] Extracted 'Convert-Bencode-1.03/Changes'
[MSG] [Sat Jan 12 01:40:30 2008] Extracted 'Convert-Bencode-1.03/Makefile.PL'
[MSG] [Sat Jan 12 01:40:30 2008] Extracted 'Convert-Bencode-1.03/MANIFEST'
[MSG] [Sat Jan 12 01:40:30 2008] Extracted 'Convert-Bencode-1.03/INSTALL'
[MSG] [Sat Jan 12 01:40:30 2008] Extracted 'Convert::Bencode' to '/home/cpan/perl5.10.0/.cpanplus/5.10.0/build/Convert-Bencode-1.03'
[MSG] [Sat Jan 12 01:40:31 2008] Writing Makefile for Convert::Bencode

[MSG] [Sat Jan 12 01:40:31 2008] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value'
[MSG] [Sat Jan 12 01:40:31 2008] Manifying blib/man3/Convert::Bencode.3

[MSG] [Sat Jan 12 01:40:32 2008] MAKE TEST passed: PERL_DL_NONLAZY=1 /home/cpan/perl5.10.0/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
t/001_basic......ok
All tests successful.
Files=1, Tests=14,  1 wallclock secs ( 0.01 usr  0.04 sys +  0.00 cusr  0.11 csys =  0.16 CPU)
Result: PASS

[MSG] [Sat Jan 12 01:40:32 2008] Sending test report for 'Convert-Bencode-1.03'
[MSG] [Sat Jan 12 01:40:32 2008] Ok, not sending test report
[ERROR] [Sat Jan 12 01:40:33 2008] MAKE failed: Illegal seek Makefile out-of-date with respect to Makefile.PL
Cleaning current config before rebuilding Makefile...
make -f Makefile.old clean > /dev/null 2>&1
/home/cpan/perl5.10.0/bin/perl Makefile.PL
Checking if your kit is complete...
Looks good
Writing Makefile for P2P::Transmission
==> Your Makefile has been rebuilt. <==
==> Please rerun the make command.  <==
false
*** Error code 1

Stop in /home/cpan/perl5.10.0/.cpanplus/5.10.0/build/P2P-Transmission-0.02 (line 722 of Makefile).


PREREQUISITES:

Here is a list of prerequisites you specified and versions we 
managed to load:
                                
	  Module Name                        Have     Want
	  Convert::Bencode                   1.03     1.03
	  IO::Socket::UNIX                   1.23        1

******************************** NOTE ********************************
The comments above are created mechanically, possibly without manual
checking by the sender.  As there are many people performing automatic
tests on each upload to CPAN, it is likely that you will receive 
identical messages about the same problem.

If you believe that the message is mistaken, please reply to the first
one with correction and/or additional informations, and do not take
it personally.  We appreciate your patience. :)
**********************************************************************

Additional comments:
 

This report was machine-generated by CPAN::YACSmoke 0.0307. Powered by POE::Component::CPAN::YACSmoke.

------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------

Environment variables:

    AUTOMATED_TESTING = 1
    PATH = /home/cpan/bin:/bin:/sbin:/usr/bin:/usr/sbin:/usr/X11R6/bin:/usr/local/bin:/usr/local/sbin:/usr/games:.
    PERL5LIB = :/home/cpan/perl5.10.0/.cpanplus/5.10.0/build/Convert-Bencode-1.03/blib/lib:/home/cpan/perl5.10.0/.cpanplus/5.10.0/build/Convert-Bencode-1.03/blib/arch:/home/cpan/perl5.10.0/.cpanplus/5.10.0/build/Convert-Bencode-1.03/blib:/home/cpan/perl5.10.0/.cpanplus/5.10.0/build/Convert-Bencode-1.03/blib/lib:/home/cpan/perl5.10.0/.cpanplus/5.10.0/build/Convert-Bencode-1.03/blib/arch:/home/cpan/perl5.10.0/.cpanplus/5.10.0/build/Convert-Bencode-1.03/blib
    PERL5_CPANPLUS_IS_RUNNING = 31151
    PERL5_CPANPLUS_IS_VERSION = 0.84
    PERL_MM_USE_DEFAULT = 1
    SHELL = /bin/ksh
    TERM = screen

Perl special variables (and OS-specific diagnostics, for MSWin32):

    Perl: $^X = /home/cpan/perl5.10.0/bin/perl
    UID:  $<  = 1000
    EUID: $>  = 1000
    GID:  $(  = 1000 1000 0
    EGID: $)  = 1000 1000 0


-------------------------------


--

Summary of my perl5 (revision 5 version 10 subversion 0) configuration:
  Platform:
    osname=openbsd, osvers=4.2, archname=OpenBSD.i386-openbsd-thread-multi-64int
    uname='openbsd wynionyn.bingosnet.co.uk 4.2 generic#375 i386 '
    config_args='-de -Dprefix=/home/cpan/perl5.10.0 -Dusethreads -Duse64bitint -Dusemymalloc=n'
    hint=recommended, useposix=true, d_sigaction=define
    useithreads=define, usemultiplicity=define
    useperlio=define, d_sfio=undef, uselargefiles=define, usesocks=undef
    use64bitint=define, use64bitall=undef, uselongdouble=undef
    usemymalloc=n, bincompat5005=undef
  Compiler:
    cc='cc', ccflags ='-pthread -fno-strict-aliasing -pipe -I/usr/local/include',
    optimize='-O2',
    cppflags='-pthread -fno-strict-aliasing -pipe -I/usr/local/include'
    ccversion='', gccversion='3.3.5 (propolice)', gccosandvers='openbsd4.2'
    intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=12345678
    d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=12
    ivtype='long long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8
    alignbytes=4, prototype=define
  Linker and Libraries:
    ld='cc', ldflags ='-pthread -Wl,-E  -L/usr/local/lib'
    libpth=/usr/local/lib /usr/lib
    libs=-lm -lutil -lc
    perllibs=-lm -lutil -lc
    libc=/usr/lib/libc.so.41.0, so=so, useshrplib=false, libperl=libperl.a
    gnulibc_version=''
  Dynamic Linking:
    dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags=' '
    cccdlflags='-DPIC -fPIC ', lddlflags='-shared -fPIC  -L/usr/local/lib'

• FAIL P2P-Transmission-0.02 OpenBSD.i386-openbsd-thread-multi-64int4.2 by chris