Front page | perl.cpan.testers |
Postings from January 2008
FAIL Backtick-AutoChomp-0.01 i386-netbsd-thread-multi-64int 3.1
Thread Next
From:
chris
Date:
January 14, 2008 00:02
Subject:
FAIL Backtick-AutoChomp-0.01 i386-netbsd-thread-multi-64int 3.1
This distribution has been tested as part of the cpan-testers
effort to test as many new uploads to CPAN as possible. See
http://testers.cpan.org/
Please cc any replies to cpan-testers@perl.org to keep other
test volunteers informed and to prevent any duplicate effort.
--
Dear DAVIDRW,
This is a computer-generated error report created automatically by
CPANPLUS, version 0.80. Testers personal comments may appear
at the end of this report.
Thank you for uploading your work to CPAN. However, it appears that
there were some problems testing your distribution.
TEST RESULTS:
Below is the error stack from stage 'make test':
[MSG] [Mon Jan 14 08:02:25 2008] Trying to get 'http://www.cpan.org/authors/id/D/DA/DAVIDRW/CHECKSUMS'
[MSG] [Mon Jan 14 08:02:27 2008] Checksum matches for 'Backtick-AutoChomp-0.01.tar.gz'
[MSG] [Mon Jan 14 08:02:27 2008] Extracted 'Backtick-AutoChomp-0.01/'
[MSG] [Mon Jan 14 08:02:27 2008] Extracted 'Backtick-AutoChomp-0.01/README'
[MSG] [Mon Jan 14 08:02:27 2008] Extracted 'Backtick-AutoChomp-0.01/t/'
[MSG] [Mon Jan 14 08:02:28 2008] Extracted 'Backtick-AutoChomp-0.01/t/pod.t'
[MSG] [Mon Jan 14 08:02:28 2008] Extracted 'Backtick-AutoChomp-0.01/t/pod-coverage.t'
[MSG] [Mon Jan 14 08:02:28 2008] Extracted 'Backtick-AutoChomp-0.01/t/00-load.t'
[MSG] [Mon Jan 14 08:02:28 2008] Extracted 'Backtick-AutoChomp-0.01/t/backtick.t'
[MSG] [Mon Jan 14 08:02:28 2008] Extracted 'Backtick-AutoChomp-0.01/MANIFEST'
[MSG] [Mon Jan 14 08:02:28 2008] Extracted 'Backtick-AutoChomp-0.01/lib/'
[MSG] [Mon Jan 14 08:02:28 2008] Extracted 'Backtick-AutoChomp-0.01/lib/Backtick/'
[MSG] [Mon Jan 14 08:02:28 2008] Extracted 'Backtick-AutoChomp-0.01/lib/Backtick/AutoChomp.pm'
[MSG] [Mon Jan 14 08:02:28 2008] Extracted 'Backtick-AutoChomp-0.01/Changes'
[MSG] [Mon Jan 14 08:02:28 2008] Extracted 'Backtick-AutoChomp-0.01/Makefile.PL'
[MSG] [Mon Jan 14 08:02:28 2008] Extracted 'Backtick-AutoChomp-0.01/META.yml'
[MSG] [Mon Jan 14 08:02:28 2008] Extracted 'Backtick::AutoChomp' to '/home/cpan/perl583/.cpanplus/5.8.3/build/Backtick-AutoChomp-0.01'
[MSG] [Mon Jan 14 08:02:31 2008] Checking if your kit is complete...
Looks good
Writing Makefile for Backtick::AutoChomp
[MSG] [Mon Jan 14 08:02:31 2008] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value'
[MSG] [Mon Jan 14 08:02:35 2008] cp lib/Backtick/AutoChomp.pm blib/lib/Backtick/AutoChomp.pm
Manifying blib/man3/Backtick::AutoChomp.3
[ERROR] [Mon Jan 14 08:02:39 2008] MAKE TEST failed: PERL_DL_NONLAZY=1 /home/cpan/perl583/bin/perl "-MExtUtils::Command::MM" "-e" "test_harness(0, 'blib/lib', 'blib/arch')" t/*.t
t/00-load.........
# Failed test 'use Backtick::AutoChomp;'
# at t/00-load.t line 6.
# Tried to use 'Backtick::AutoChomp'.
# Error: Can't locate PPI.pm in @INC (@INC contains: /home/cpan/perl583/.cpanplus/5.8.3/build/Backtick-AutoChomp-0.01/blib/lib /home/cpan/perl583/.cpanplus/5.8.3/build/Backtick-AutoChomp-0.01/blib/arch /home/cpan/perl583/.cpanplus/5.8.3/build/Backtick-AutoChomp-0.01/blib /home/cpan/perl583/lib/5.8.3/i386-netbsd-thread-multi-64int /home/cpan/perl583/lib/5.8.3/i386-netbsd-thread-multi-64int /home/cpan/perl583/lib/5.8.3 /home/cpan/perl583/lib/site_perl/5.8.3/i386-netbsd-thread-multi-64int /home/cpan/perl583/lib/site_perl/5.8.3/i386-netbsd-thread-multi-64int /home/cpan/perl583/lib/site_perl/5.8.3 /home/cpan/perl583/lib/site_perl/5.8.3/i386-netbsd-thread-multi-64int /home/cpan/perl583/lib/site_perl/5.8.3 /home/cpan/perl583/lib/site_perl . /home/cpan/perl583/lib/5.8.3/i386-netbsd-thread-multi-64int /home/cpan/perl583/lib/5.8.3 /home/cpan/perl583/lib/site_perl/5.8.3/i386-netbsd-thread-multi-64int /home/cpan/perl583/lib/site_perl/5.8.3 /home/cpan/perl583/lib/site_perl) at /home/cpan/perl583/.cpanplus/5.8.3/build/Backtick-AutoChomp-0.01/blib/lib/Backtick/AutoChomp.pm line 6.
# BEGIN failed--compilation aborted at t/00-load.t line 6.
# Compilation failed in require at (eval 3) line 2.
# BEGIN failed--compilation aborted at (eval 3) line 2.
Use of uninitialized value in concatenation (.) or string at t/00-load.t line 9.
# Testing Backtick::AutoChomp , Perl 5.008003, /home/cpan/perl583/bin/perl
# Looks like you failed 1 test of 1.
dubious
Test returned status 1 (wstat 256, 0x100)
DIED. FAILED test 1
Failed 1/1 tests, 0.00% okay
t/backtick........Can't locate PPI.pm in @INC (@INC contains: /home/cpan/perl583/.cpanplus/5.8.3/build/Backtick-AutoChomp-0.01/blib/lib /home/cpan/perl583/.cpanplus/5.8.3/build/Backtick-AutoChomp-0.01/blib/arch /home/cpan/perl583/.cpanplus/5.8.3/build/Backtick-AutoChomp-0.01/blib /home/cpan/perl583/lib/5.8.3/i386-netbsd-thread-multi-64int /home/cpan/perl583/lib/5.8.3/i386-netbsd-thread-multi-64int /home/cpan/perl583/lib/5.8.3 /home/cpan/perl583/lib/site_perl/5.8.3/i386-netbsd-thread-multi-64int /home/cpan/perl583/lib/site_perl/5.8.3/i386-netbsd-thread-multi-64int /home/cpan/perl583/lib/site_perl/5.8.3 /home/cpan/perl583/lib/site_perl/5.8.3/i386-netbsd-thread-multi-64int /home/cpan/perl583/lib/site_perl/5.8.3 /home/cpan/perl583/lib/site_perl . /home/cpan/perl583/lib/5.8.3/i386-netbsd-thread-multi-64int /home/cpan/perl583/lib/5.8.3 /home/cpan/perl583/lib/site_perl/5.8.3/i386-netbsd-thread-multi-64int /home/cpan/perl583/lib/site_perl/5.8.3 /home/cpan/perl583/lib/site_perl .) at /home/cpan/perl583/.cpanplus/5.8.3/build/Backtick-AutoChomp-0.01/blib/lib/Backtick/AutoChomp.pm line 6.
BEGIN failed--compilation aborted at /home/cpan/perl583/.cpanplus/5.8.3/build/Backtick-AutoChomp-0.01/blib/lib/Backtick/AutoChomp.pm line 6.
Compilation failed in require at t/backtick.t line 19.
BEGIN failed--compilation aborted at t/backtick.t line 19.
# Looks like your test died before it could output anything.
dubious
Test returned status 255 (wstat 65280, 0xff00)
DIED. FAILED tests 1-17
Failed 17/17 tests, 0.00% okay
t/pod-coverage....skipped
all skipped: Test::Pod::Coverage 1.08 required for testing POD coverage
t/pod.............skipped
all skipped: Test::Pod 1.22 required for testing POD
Failed Test Stat Wstat Total Fail List of Failed
-------------------------------------------------------------------------------
t/00-load.t 1 256 1 1 1
t/backtick.t 255 65280 17 34 1-17
2 tests skipped.
Failed 2/4 test scripts. 18/18 subtests failed.
Files=4, Tests=18, 3 wallclock secs ( 0.70 cusr + 0.08 csys = 0.78 CPU)
Failed 2/4 test programs. 18/18 subtests failed.
gmake: *** [test_dynamic] Error 25
[MSG] [Mon Jan 14 08:02:39 2008] DEFAULT 'proceed_on_test_failure' HANDLER RETURNING 'sub return value'
MISSING PREREQUISITES:
It was observed that the test suite seem to fail without these modules:
PPI
As such, adding the prerequisite module(s) to 'PREREQ_PM' in your
Makefile.PL should solve this problem. For example:
WriteMakefile(
AUTHOR => 'DAVIDRW (cpanplus-info@lists.sf.net)',
... # other information
PREREQ_PM => {
'PPI' => '0', # or a minimum working version
}
);
If you are interested in making a more flexible Makefile.PL that can
probe for missing dependencies and install them, ExtUtils::AutoInstall
at <http://search.cpan.org/dist/ExtUtils-AutoInstall/> may be
worth a look.
Thanks! :-)
PREREQUISITES:
Here is a list of prerequisites you specified and versions we
managed to load:
Module Name Have Want
Test::More 0.70 0
******************************** NOTE ********************************
The comments above are created mechanically, possibly without manual
checking by the sender. As there are many people performing automatic
tests on each upload to CPAN, it is likely that you will receive
identical messages about the same problem.
If you believe that the message is mistaken, please reply to the first
one with correction and/or additional informations, and do not take
it personally. We appreciate your patience. :)
**********************************************************************
Additional comments:
This report was machine-generated by CPAN::YACSmoke 0.0307.
------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------
Environment variables:
AUTOMATED_TESTING = 1
PATH = /home/cpan/bin:/bin:/sbin:/usr/bin:/usr/sbin:/usr/X11R6/bin:/usr/pkg/bin:/usr/pkg/sbin:/usr/games:/usr/local/bin:/usr/local/sbin
PERL5LIB = :/home/cpan/perl583/.cpanplus/5.8.3/build/Backtick-AutoChomp-0.01/blib/lib:/home/cpan/perl583/.cpanplus/5.8.3/build/Backtick-AutoChomp-0.01/blib/arch:/home/cpan/perl583/.cpanplus/5.8.3/build/Backtick-AutoChomp-0.01/blib
PERL5_CPANPLUS_IS_RUNNING = 18455
PERL5_CPANPLUS_IS_VERSION = 0.80
PERL_MM_USE_DEFAULT = 1
SHELL = /usr/pkg/bin/bash
TERM = screen
Perl special variables (and OS-specific diagnostics, for MSWin32):
Perl: $^X = /home/cpan/perl583/bin/perl
UID: $< = 1002
EUID: $> = 1002
GID: $( = 100 100
EGID: $) = 100 100
-------------------------------
--
Summary of my perl5 (revision 5.0 version 8 subversion 3) configuration:
Platform:
osname=netbsd, osvers=3.1, archname=i386-netbsd-thread-multi-64int
uname='netbsd canker.bingosnet.co.uk 3.1 netbsd 3.1 (generic_laptop) #0: tue oct 31 04:32:05 utc 2006 builds@b0.netbsd.org:homebuildsabnetbsd-3-1-releasei386200610302053z-objhomebuildsabnetbsd-3-1-releasesrcsysarchi386compilegeneric_laptop i386 '
config_args=''
hint=recommended, useposix=true, d_sigaction=define
usethreads=define use5005threads=undef useithreads=define usemultiplicity=define
useperlio=define d_sfio=undef uselargefiles=define usesocks=undef
use64bitint=define use64bitall=undef uselongdouble=undef
usemymalloc=n, bincompat5005=undef
Compiler:
cc='cc', ccflags ='-fno-strict-aliasing -I/usr/pkg/include',
optimize='-O',
cppflags='-fno-strict-aliasing -I/usr/pkg/include'
ccversion='', gccversion='3.3.3 (NetBSD nb3 20040520)', gccosandvers=''
intsize=4, longsize=4, ptrsize=4, doublesize=8, byteorder=12345678
d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=12
ivtype='long long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8
alignbytes=4, prototype=define
Linker and Libraries:
ld='cc', ldflags =' -Wl,-rpath,/usr/pkg/lib -Wl,-rpath,/usr/local/lib -L/usr/pkg/lib'
libpth=/usr/pkg/lib /lib /usr/lib
libs=-lgdbm -lm -lcrypt -lutil -lc -lposix -lpthread
perllibs=-lm -lcrypt -lutil -lc -lposix -lpthread
libc=/lib/libc.so, so=so, useshrplib=false, libperl=libperl.a
gnulibc_version=''
Dynamic Linking:
dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E '
cccdlflags='-DPIC -fPIC ', lddlflags='--whole-archive -shared -L/usr/pkg/lib'
Thread Next