FAIL Scalar-Util-Clone-0.10 alpha-linux-thread-multi2.6.18-5-alpha-generic

This distribution has been tested as part of the cpan-testers
effort to test as many new uploads to CPAN as possible.  See
http://testers.cpan.org/

Please cc any replies to cpan-testers@perl.org to keep other
test volunteers informed and to prevent any duplicate effort.

--

Dear CHOCOLATE,
    
This is a computer-generated error report created automatically by
CPANPLUS, version 0.84. Testers personal comments may appear 
at the end of this report.


Thank you for uploading your work to CPAN.  However, it appears that
there were some problems testing your distribution.

TEST RESULTS:

Below is the error stack from stage 'fetch':

[MSG] [Mon Jan 14 14:48:19 2008] Trying to get 'http://www.cpan.org/authors/id/C/CH/CHOCOLATE/Scalar-Util-Clone-0.10.tar.gz'
[MSG] [Mon Jan 14 14:48:28 2008] Trying to get 'http://www.cpan.org/authors/id/C/CH/CHOCOLATE/CHECKSUMS'
[MSG] [Mon Jan 14 14:48:28 2008] Checksum matches for 'Scalar-Util-Clone-0.10.tar.gz'
[MSG] [Mon Jan 14 14:48:29 2008] Extracted 'Scalar-Util-Clone-0.10/'
[MSG] [Mon Jan 14 14:48:29 2008] Extracted 'Scalar-Util-Clone-0.10/t/'
[MSG] [Mon Jan 14 14:48:29 2008] Extracted 'Scalar-Util-Clone-0.10/t/weakref.t'
[MSG] [Mon Jan 14 14:48:29 2008] Extracted 'Scalar-Util-Clone-0.10/t/io.t'
[MSG] [Mon Jan 14 14:48:29 2008] Extracted 'Scalar-Util-Clone-0.10/t/01_compile.t'
[MSG] [Mon Jan 14 14:48:29 2008] Extracted 'Scalar-Util-Clone-0.10/t/tied.t'
[MSG] [Mon Jan 14 14:48:29 2008] Extracted 'Scalar-Util-Clone-0.10/t/clone.t'
[MSG] [Mon Jan 14 14:48:29 2008] Extracted 'Scalar-Util-Clone-0.10/t/regex.t'
[MSG] [Mon Jan 14 14:48:29 2008] Extracted 'Scalar-Util-Clone-0.10/t/coderef.t'
[MSG] [Mon Jan 14 14:48:29 2008] Extracted 'Scalar-Util-Clone-0.10/t/pod.t'
[MSG] [Mon Jan 14 14:48:29 2008] Extracted 'Scalar-Util-Clone-0.10/t/hashref.t'
[MSG] [Mon Jan 14 14:48:29 2008] Extracted 'Scalar-Util-Clone-0.10/t/scalar.t'
[MSG] [Mon Jan 14 14:48:29 2008] Extracted 'Scalar-Util-Clone-0.10/lib/'
[MSG] [Mon Jan 14 14:48:29 2008] Extracted 'Scalar-Util-Clone-0.10/lib/Scalar/'
[MSG] [Mon Jan 14 14:48:29 2008] Extracted 'Scalar-Util-Clone-0.10/lib/Scalar/Util/'
[MSG] [Mon Jan 14 14:48:29 2008] Extracted 'Scalar-Util-Clone-0.10/lib/Scalar/Util/Clone.pm'
[MSG] [Mon Jan 14 14:48:29 2008] Extracted 'Scalar-Util-Clone-0.10/META.yml'
[MSG] [Mon Jan 14 14:48:29 2008] Extracted 'Scalar-Util-Clone-0.10/Makefile.PL'
[MSG] [Mon Jan 14 14:48:29 2008] Extracted 'Scalar-Util-Clone-0.10/README'
[MSG] [Mon Jan 14 14:48:29 2008] Extracted 'Scalar-Util-Clone-0.10/Clone.xs'
[MSG] [Mon Jan 14 14:48:29 2008] Extracted 'Scalar-Util-Clone-0.10/Changes'
[MSG] [Mon Jan 14 14:48:29 2008] Extracted 'Scalar-Util-Clone-0.10/MANIFEST'
[MSG] [Mon Jan 14 14:48:29 2008] Extracted 'Scalar-Util-Clone-0.10/ptable.h'
[MSG] [Mon Jan 14 14:48:29 2008] Extracted 'Scalar-Util-Clone-0.10/ppport.h'
[MSG] [Mon Jan 14 14:48:29 2008] Extracted 'Scalar::Util::Clone' to '/home/chris/perl5.10.0/.cpanplus/5.10.0/build/Scalar-Util-Clone-0.10'
[MSG] [Mon Jan 14 14:48:30 2008] Checking if your kit is complete...
Looks good
Writing Makefile for Scalar::Util::Clone

[MSG] [Mon Jan 14 14:48:30 2008] DEFAULT 'filter_prereqs' HANDLER RETURNING 'sub return value'
[ERROR] [Mon Jan 14 14:48:36 2008] MAKE failed: Illegal seek cp lib/Scalar/Util/Clone.pm blib/lib/Scalar/Util/Clone.pm
/home/chris/perl5.10.0/bin/perl /home/chris/perl5.10.0/lib/5.10.0/ExtUtils/xsubpp  -typemap /home/chris/perl5.10.0/lib/5.10.0/ExtUtils/typemap  Clone.xs > Clone.xsc && mv Clone.xsc Clone.c
cc -c   -D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -O3 -Wall   -DVERSION=\"0.10\" -DXS_VERSION=\"0.10\" -fPIC "-I/home/chris/perl5.10.0/lib/5.10.0/alpha-linux-thread-multi/CORE"   Clone.c
Clone.xs: In function ‘share_hek_flags’:
Clone.xs:169: error: ‘XPVHV’ has no member named ‘xhv_array’
Clone.xs: In function ‘new_he’:
Clone.xs:207: error: ‘PL_he_root’ undeclared (first use in this function)
Clone.xs:207: error: (Each undeclared identifier is reported only once
Clone.xs:207: error: for each function it appears in.)
Clone.xs: In function ‘more_he’:
Clone.xs:220: error: ‘XPV’ has no member named ‘xpv_pv’
Clone.xs:220: error: ‘PL_he_arenaroot’ undeclared (first use in this function)
Clone.xs:225: error: ‘PL_he_root’ undeclared (first use in this function)
Clone.xs: In function ‘clone_sv’:
Clone.xs:392: error: ‘SVs_PADBUSY’ undeclared (first use in this function)
Clone.xs:461: error: duplicate case value
Clone.xs:439: error: previously used here
Clone.xs:509: warning: implicit declaration of function ‘AvFLAGS’
Clone.xs:509: error: invalid lvalue in assignment
Clone.xs:554: error: ‘XPVHV’ has no member named ‘xhv_array’
Clone.xs:557: error: ‘XPVHV’ has no member named ‘xhv_array’
Clone.xs:558: error: ‘XPVHV’ has no member named ‘xhv_array’
Clone.xs:563: error: ‘XPVHV’ has no member named ‘xhv_eiter’
Clone.xs:563: error: ‘XPVHV’ has no member named ‘xhv_eiter’
Clone.xs:564: error: ‘XPVHV’ has no member named ‘xhv_eiter’
Clone.xs:578: warning: implicit declaration of function ‘HvPMROOT’
Clone.xs:578: error: invalid lvalue in assignment
Clone.xs:579: error: invalid lvalue in assignment
make: *** [Clone.o] Error 1


PREREQUISITES:

Here is a list of prerequisites you specified and versions we 
managed to load:
                                
	  Module Name                        Have     Want
	  Scalar::Util                       1.19     1.01

******************************** NOTE ********************************
The comments above are created mechanically, possibly without manual
checking by the sender.  As there are many people performing automatic
tests on each upload to CPAN, it is likely that you will receive 
identical messages about the same problem.

If you believe that the message is mistaken, please reply to the first
one with correction and/or additional informations, and do not take
it personally.  We appreciate your patience. :)
**********************************************************************

Additional comments:
 

This report was machine-generated by CPAN::YACSmoke 0.0307. Powered by POE::Component::CPAN::YACSmoke.

------------------------------
ENVIRONMENT AND OTHER CONTEXT
------------------------------

Environment variables:

    AUTOMATED_TESTING = 1
    LANG = en_GB.UTF-8
    PATH = /usr/local/bin:/usr/bin:/bin:/usr/games
    PERL5_CPANPLUS_IS_RUNNING = 28780
    PERL5_CPANPLUS_IS_VERSION = 0.84
    PERL_MM_USE_DEFAULT = 1
    SHELL = /bin/bash
    TERM = screen.linux

Perl special variables (and OS-specific diagnostics, for MSWin32):

    Perl: $^X = /home/chris/perl5.10.0/bin/perl
    UID:  $<  = 1000
    EUID: $>  = 1000
    GID:  $(  = 1000 20 24 25 29 44 46 1000
    EGID: $)  = 1000 20 24 25 29 44 46 1000


-------------------------------


--

Summary of my perl5 (revision 5 version 10 subversion 0) configuration:
  Platform:
    osname=linux, osvers=2.6.18-5-alpha-generic, archname=alpha-linux-thread-multi
    uname='linux debbie 2.6.18-5-alpha-generic #1 tue oct 2 23:07:38 utc 2007 alpha gnulinux '
    config_args='-e -Dprefix=/home/chris/perl5.10.0 -Dusethreads'
    hint=recommended, useposix=true, d_sigaction=define
    useithreads=define, usemultiplicity=define
    useperlio=define, d_sfio=undef, uselargefiles=define, usesocks=undef
    use64bitint=define, use64bitall=define, uselongdouble=undef
    usemymalloc=n, bincompat5005=undef
  Compiler:
    cc='cc', ccflags ='-D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS -fno-strict-aliasing -pipe -I/usr/local/include -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64',
    optimize='-O2',
    cppflags='-D_REENTRANT -D_GNU_SOURCE -DTHREADS_HAVE_PIDS -fno-strict-aliasing -pipe -I/usr/local/include'
    ccversion='', gccversion='4.1.2 20061115 (prerelease) (Debian 4.1.1-21)', gccosandvers=''
    intsize=4, longsize=8, ptrsize=8, doublesize=8, byteorder=12345678
    d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=8
    ivtype='long', ivsize=8, nvtype='double', nvsize=8, Off_t='off_t', lseeksize=8
    alignbytes=8, prototype=define
  Linker and Libraries:
    ld='cc', ldflags =' -L/usr/local/lib'
    libpth=/usr/local/lib /lib /usr/lib
    libs=-lnsl -ldb -ldl -lm -lcrypt -lutil -lpthread -lc
    perllibs=-lnsl -ldl -lm -lcrypt -lutil -lpthread -lc
    libc=, so=so, useshrplib=false, libperl=libperl.a
    gnulibc_version='2.3.6'
  Dynamic Linking:
    dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags='-Wl,-E'
    cccdlflags='-fPIC', lddlflags='-shared -O2 -L/usr/local/lib'

• FAIL Scalar-Util-Clone-0.10 alpha-linux-thread-multi2.6.18-5-alpha-generic by chris